What wireless card can enable my U530 use 5GHz network

The built-in Intel N 7260 on U530 is just single band. I can't use 5GHz network. Also, I found this wireless card really sucks! Sometimes, it stops working.
My old laptop's Intel N 6205 is much better, never had this kind of problem.
I wonder what kind of wireless card could be for replacement? Could anyone provide the purchase link for me? Do I have to de-whitelist the BIOS? My current wireless card on U530 is shown as below. Thanks!
Yilu
Link to image
Moderator note: large image(s) converted to link(s): About Posting Pictures In The Forums

Welcome to the Lenovo Community !
I'm not an owner of your model so hopefully someone else will come along with personal experience on this. In the mean time page #67 of your model's Hardware Maintenance Manual lists the wifi cards that are approved for your laptop. The wifi cards are #10 in the parts listing.
The link below is for your model's Hardware Maintenance Manual. When working inside your system please follow all precautions and recommendations that are noted in the manual.
http://download.lenovo.com/consumer/mobiles_pub/ideapad_s210s210touchs215_hmm.pdf
Owner & Operator of the following:
● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.

Similar Messages

Camileo H10 - What SD card can I use?

Hi anyone,
I am new to Toshiba products.
I have just bought one of your movie cameras ( Camileo H10 ) and i cannot find any help online.
The questions i wanted to ask were,
1.) What class (for speed) of SD card can the camera use.
2.) Is there somewhere i can fill in my online warranty

Hello, I tested the H10 cam with the following (Transcend) cards and they were all supported:
movie files:
4GB SDHC (Class6) 3:09 h HD (720p)
8GB SDHC (Class6) 6:19 h HD (720p)
16GB SDHC (Class6) 12:36 h HD (720p)
32GB SDHC (Class6) 25:32 h HD (720p)
greets

What kind of wireless card to I need to use airport on my pc

I have a can I use a compaq presario sr2050 nx, the main house computer is and apple.

You can use any wireless card which supports an 802.11 protocol also supported by the base station; currently, those are 802.11a, 802.11b, 802.11g, and 802.11n.
(43384)

What gift cards can i use for a nigerian iTunes account?

i've got a nigerian itunes account but the app prices are in US dollars and when i tried buying an app with my account the money was deducted but the download didn't come through, so now i wanna use gift cards but can't figure out what gift cards to get

Hi,
i've got a nigerian itunes account but the app prices are in US dollars
With iTunes open, select iTunes Store on the left in the source list. Then click the round flag icon bottom right corner of that window to change countries.
Click Change Country bottom of the window here > http://store.apple.com/us/browse/home/giftcards/itunes/gallery
I don't see Nigeria on the list.
A credit or debit card credentials must be associated with the same country where you reside.
"Although you can browse the iTunes Store in any country without being signed in, you can only purchase content from the iTunes Store for your own country. This is enforced via the billing address associated with your credit card or other payment method that you use with the iTunes Store, rather than your actual geographic location."
From here > The Complete Guide to Using the iTunes Store | iLounge Article
iTunes Store: Which types of items can I buy in my country?

How can I select which channel the wireless card on the Macbook Pro uses?

Hi,
I have a MacBook Pro which must be 5-6 years old running OS ver10.5.8 with the following wireless card details..
Wireless Card Type:          AirPort Extreme (0x168C, 0x86)
Wireless Card Locale:          Worldwide
Wireless Card Firmware Version:          1.4.16.2
Current Wireless Network:          ML MC
Wireless Channel:          6
.. and a Time Capsule running firmware ver 7.6.1.
We recently installed a faster broadband connection and for some reason the pc’s (recent purchases) we have are regularly getting a 37Gb max download speed and the MacBook Pro is regularly getting only 19Gb max download speed. All the computers are connecting through the same Time Capsule to the net. On the Time Capsule the 2.4GHz and 5GHz bandwidths are set so the channel is selected automatically.
Is the max download speed on the MacBook pro slower because of the wireless card in it? And if so, how can I check? Could I manually adjust it to a faster setting?
Thanks,
Simon

Channels are managed by the router and the automatic settings on your TC is about right - unless you have general WiFi issues.
Your slower speed is down to the older Airport card in your MBP.

What graphic card can i use on my computer

hello i have a compaq presario SR1802FR with A8AE-LE motherboard with 300 w and my processor is AMD Sempron 3000+ 1.8GHz (no overclock) with 512 ram (DDR 1 pc3200 400MHz) and i want to have a new graphic card
can someone suggest a graphic card compatible with my motherborad
(i want graphic card with VGA port not DVA or HDMI)

HI Craoc,
Here is a link to your printer's product specifications.
Here are the sizes and weights of the cards your printer will support.
Paper type Paper size
Index
101.6 x 152 mm (4 x 6 inches)
Index
127 x 203.2 mm (5 x 8 inches)
Here is a link to the Manual for your printer incase you would like to refer to it as well.
If I helped you at all it would be great if you clicked the blue kudos star!
If I solved your post please mark it as solved to help others.
I'm a printer tech with HP.

Wireless card can not find any network.

I have 2 wireless card:
TP-Link PCI card:TL-WN851N
D-Link USB card:DWA-127
both card work fine under windows.
but TP-Link can not find any wireless network,even if I moved my wirelss router to same room with TP-Link wireless card.
Anybody have an idea ?
I comfirmed the kernel driver is properly loaded:
[root@XSign ~]# lspci -k
04:00.0 Network controller: Qualcomm Atheros AR9227 Wireless Network Adapter (rev 01)
Subsystem: Qualcomm Atheros Device 0300
Kernel driver in use: ath9k
Kernel modules: ath9k
[root@XSign ~]# ifconfig -a
//this is D-Link card
wlp0s20u11: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.2.101 netmask 255.255.255.0 broadcast 255.255.255.255
inet6 fe80::bef6:85ff:fe67:57c prefixlen 64 scopeid 0x20<link>
ether bc:f6:85:67:05:7c txqueuelen 1000 (Ethernet)
RX packets 171436 bytes 230296030 (219.6 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 107153 bytes 12458452 (11.8 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
//this is TP-Link card
wlp4s0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 08:57:00:34:4f:c5 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
[root@XSign ~]# ifconfig wlp4s0 up
[root@XSign ~]# iwlist wlp4s0 scan
wlp4s0 No scan results
and I can find many wireless network with same command through card wlp0s20u11
AR9227 is supported : http://wireless.kernel.org/en/users/Drivers/ath9k/

Thanks for reply.
one more thing, I noticed the power LED didn't "light up" when I execute the "power up" command.
[root@XSign hacksign]# ip link show wlp4s0
3: wlp4s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DEFAULT group default qlen 1000
link/ether 08:57:00:34:4f:c5 brd ff:ff:ff:ff:ff:ff
[root@XSign hacksign]# ip link set wlp4s0 up
[root@XSign hacksign]# ip link show wlp4s0
3: wlp4s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DEFAULT group default qlen 1000
link/ether 08:57:00:34:4f:c5 brd ff:ff:ff:ff:ff:ff
[root@XSign hacksign]# dmesg | grep firmware
[root@XSign hacksign]#
any suggesstions ?
below is my complete demsg output:
[root@XSign hacksign]# dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.15.1-1-ARCH (nobody@var-lib-archbuild-testing-x86_64-tobias) (gcc version 4.9.0 20140604 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Jun 17 09:32:20 CEST 2014
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=08871484-d630-41f6-a743-4086ad9f8628 rw noisy init=/usr/lib/systemd/systemd nomodeset
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bb231fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb232000-0x00000000bb238fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bb239000-0x00000000bc247fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bc248000-0x00000000bc74dfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bc74e000-0x00000000ce799fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ce79a000-0x00000000ce9adfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ce9ae000-0x00000000cea93fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cea94000-0x00000000cf7fefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cf7ff000-0x00000000cf7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022dffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. G1.Sniper B5/G1.Sniper B5-CF, BIOS F6 01/17/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x22e000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7E00000000 write-back
[ 0.000000] 1 base 0200000000 mask 7FE0000000 write-back
[ 0.000000] 2 base 0220000000 mask 7FF8000000 write-back
[ 0.000000] 3 base 0228000000 mask 7FFC000000 write-back
[ 0.000000] 4 base 022C000000 mask 7FFE000000 write-back
[ 0.000000] 5 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 6 base 00D0000000 mask 7FF0000000 uncachable
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcf800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd710-0x000fd71f] mapped at [ffff8800000fd710]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b3e000, 0x01b3efff] PGTABLE
[ 0.000000] BRK [0x01b3f000, 0x01b3ffff] PGTABLE
[ 0.000000] BRK [0x01b40000, 0x01b40fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x22de00000-0x22dffffff]
[ 0.000000] [mem 0x22de00000-0x22dffffff] page 2M
[ 0.000000] BRK [0x01b41000, 0x01b41fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x22c000000-0x22ddfffff]
[ 0.000000] [mem 0x22c000000-0x22ddfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x22bffffff]
[ 0.000000] [mem 0x200000000-0x22bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbb231fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0xbb1fffff] page 2M
[ 0.000000] [mem 0xbb200000-0xbb231fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbb239000-0xbc247fff]
[ 0.000000] [mem 0xbb239000-0xbb3fffff] page 4k
[ 0.000000] [mem 0xbb400000-0xbc1fffff] page 2M
[ 0.000000] [mem 0xbc200000-0xbc247fff] page 4k
[ 0.000000] BRK [0x01b42000, 0x01b42fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xbc74e000-0xce799fff]
[ 0.000000] [mem 0xbc74e000-0xbc7fffff] page 4k
[ 0.000000] [mem 0xbc800000-0xce5fffff] page 2M
[ 0.000000] [mem 0xce600000-0xce799fff] page 4k
[ 0.000000] BRK [0x01b43000, 0x01b43fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xcf7ff000-0xcf7fffff]
[ 0.000000] [mem 0xcf7ff000-0xcf7fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x379c0000-0x37cd7fff]
[ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000CEA6C078 000074 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000CEA77460 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000CEA6C188 00B2D7 (v02 ALASKA A M I 000000F6 INTL 20091112)
[ 0.000000] ACPI: FACS 0x00000000CEA92080 000040
[ 0.000000] ACPI: APIC 0x00000000CEA77570 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000CEA775E8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x00000000CEA77630 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000CEA77B70 000AD8 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: MCFG 0x00000000CEA78648 00003C (v01 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000CEA78688 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000CEA786C0 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000CEA78A30 003299 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
[ 0.000000] ACPI: DMAR 0x00000000CEA7BCD0 000080 (v01 INTEL HSW 00000001 INTL 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000022dffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x22dffffff]
[ 0.000000] NODE_DATA [mem 0x22dff6000-0x22dffafff]
[ 0.000000] [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880225600000-ffff88022d5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x22dffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0xbb231fff]
[ 0.000000] node 0: [mem 0xbb239000-0xbc247fff]
[ 0.000000] node 0: [mem 0xbc74e000-0xce799fff]
[ 0.000000] node 0: [mem 0xcf7ff000-0xcf7fffff]
[ 0.000000] node 0: [mem 0x100000000-0x22dffffff]
[ 0.000000] On node 0 totalpages: 2081322
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13131 pages used for memmap
[ 0.000000] DMA32 zone: 840334 pages, LIFO batch:31
[ 0.000000] Normal zone: 19328 pages used for memmap
[ 0.000000] Normal zone: 1236992 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb232000-0xbb238fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbc248000-0xbc74dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xce79a000-0xce9adfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xce9ae000-0xcea93fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcea94000-0xcf7fefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf800000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xcf800000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88022dc00000 s87168 r8192 d23424 u524288
[ 0.000000] pcpu-alloc: s87168 r8192 d23424 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2048778
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=08871484-d630-41f6-a743-4086ad9f8628 rw noisy init=/usr/lib/systemd/systemd nomodeset
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8112620K/8325288K available (5222K kernel code, 885K rwdata, 1644K rodata, 1116K init, 1284K bss, 212668K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:8448 nr_irqs:712 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3192.796 MHz processor
[ 0.000021] Calibrating delay loop (skipped), value calculated using timer frequency.. 6388.65 BogoMIPS (lpj=10642653)
[ 0.000023] pid_max: default: 32768 minimum: 301
[ 0.000027] ACPI: Core revision 20140214
[ 0.007164] ACPI: All ACPI Tables successfully acquired
[ 0.008322] Security Framework initialized
[ 0.008326] Yama: becoming mindful.
[ 0.008691] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.010281] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.010989] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.010996] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.011160] Initializing cgroup subsys memory
[ 0.011162] Initializing cgroup subsys devices
[ 0.011164] Initializing cgroup subsys freezer
[ 0.011165] Initializing cgroup subsys net_cls
[ 0.011166] Initializing cgroup subsys blkio
[ 0.011180] CPU: Physical Processor ID: 0
[ 0.011181] CPU: Processor Core ID: 0
[ 0.011958] mce: CPU supports 9 MCE banks
[ 0.011969] CPU0: Thermal monitoring enabled (TM1)
[ 0.011978] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
tlb_flushall_shift: 6
[ 0.012042] Freeing SMP alternatives memory: 20K (ffffffff819f6000 - ffffffff819fb000)
[ 0.012591] ftrace: allocating 20223 entries in 79 pages
[ 0.018707] dmar: Host address width 39
[ 0.018709] dmar: DRHD base: 0x000000fed90000 flags: 0x1
[ 0.018715] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap d2008c20660462 ecap f010da
[ 0.018716] dmar: RMRR base: 0x000000ce92c000 end: 0x000000ce938fff
[ 0.018781] IOAPIC id 2 under DRHD base 0xfed90000 IOMMU 0
[ 0.018781] HPET id 0 under DRHD base 0xfed90000
[ 0.018782] Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.018855] Enabled IRQ remapping in x2apic mode
[ 0.018856] Enabling x2apic
[ 0.018856] Enabled x2apic
[ 0.018860] Switched APIC routing to cluster x2apic.
[ 0.019222] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.052254] smpboot: CPU0: Intel(R) Core(TM) i5-4460 CPU @ 3.20GHz (fam: 06, model: 3c, stepping: 03)
[ 0.052259] TSC deadline timer enabled
[ 0.052264] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.052268] ... version: 3
[ 0.052269] ... bit width: 48
[ 0.052270] ... generic registers: 8
[ 0.052270] ... value mask: 0000ffffffffffff
[ 0.052271] ... max period: 0000ffffffffffff
[ 0.052271] ... fixed-purpose events: 3
[ 0.052272] ... event mask: 00000007000000ff
[ 0.079047] x86: Booting SMP configuration:
[ 0.079048] .... node #0, CPUs: #1
[ 0.093027] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.099712] #2 #3
[ 0.134308] x86: Booted up 1 node, 4 CPUs
[ 0.134310] smpboot: Total of 4 processors activated (25552.63 BogoMIPS)
[ 0.136937] devtmpfs: initialized
[ 0.138913] PM: Registering ACPI NVS region [mem 0xbb232000-0xbb238fff] (28672 bytes)
[ 0.138915] PM: Registering ACPI NVS region [mem 0xce9ae000-0xcea93fff] (942080 bytes)
[ 0.139415] pinctrl core: initialized pinctrl subsystem
[ 0.139443] RTC time: 11:10:27, date: 06/26/14
[ 0.139466] NET: Registered protocol family 16
[ 0.139522] cpuidle: using governor ladder
[ 0.139522] cpuidle: using governor menu
[ 0.139531] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.139532] ACPI: bus type PCI registered
[ 0.139533] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.139569] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.139570] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.143859] PCI: Using configuration type 1 for base access
[ 0.144410] ACPI: Added _OSI(Module Device)
[ 0.144411] ACPI: Added _OSI(Processor Device)
[ 0.144412] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.144413] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.147021] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.148606] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.161070] ACPI: SSDT 0x00000000CE9A3C18 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.161369] ACPI: Dynamic OEM Table Load:
[ 0.161370] ACPI: SSDT 0x0000000000000000 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.174502] ACPI: SSDT 0x00000000CE9A3618 0005AA (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.174917] ACPI: Dynamic OEM Table Load:
[ 0.174918] ACPI: SSDT 0x0000000000000000 0005AA (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.184454] ACPI: SSDT 0x00000000CE9A2D98 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.184763] ACPI: Dynamic OEM Table Load:
[ 0.184765] ACPI: SSDT 0x0000000000000000 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.194062] ACPI: Interpreter enabled
[ 0.194068] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140214/hwxface-580)
[ 0.194072] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140214/hwxface-580)
[ 0.194082] ACPI: (supports S0 S3 S4 S5)
[ 0.194083] ACPI: Using IOAPIC for interrupt routing
[ 0.194102] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.199374] ACPI: Power Resource [FN00] (off)
[ 0.199419] ACPI: Power Resource [FN01] (off)
[ 0.199463] ACPI: Power Resource [FN02] (off)
[ 0.199506] ACPI: Power Resource [FN03] (off)
[ 0.199551] ACPI: Power Resource [FN04] (off)
[ 0.199896] ACPI: \_PR_.CPU4: failed to get CPU APIC ID.
[ 0.199899] ACPI: \_PR_.CPU5: failed to get CPU APIC ID.
[ 0.199901] ACPI: \_PR_.CPU6: failed to get CPU APIC ID.
[ 0.199903] ACPI: \_PR_.CPU7: failed to get CPU APIC ID.
[ 0.200027] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.200030] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.200156] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.200234] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.200577] PCI host bridge to bus 0000:00
[ 0.200579] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.200581] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.200582] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.200583] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.200584] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.200585] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.200586] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.200587] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.200587] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.200588] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.200589] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfeafffff]
[ 0.200595] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[ 0.200653] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[ 0.200679] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.200711] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.200755] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[ 0.200771] pci 0000:00:14.0: reg 0x10: [mem 0xf3220000-0xf322ffff 64bit]
[ 0.200822] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.200847] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.200874] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[ 0.200890] pci 0000:00:16.0: reg 0x10: [mem 0xf323c000-0xf323c00f 64bit]
[ 0.200945] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.200993] pci 0000:00:16.3: [8086:8c3d] type 00 class 0x070002
[ 0.201006] pci 0000:00:16.3: reg 0x10: [io 0xf0a0-0xf0a7]
[ 0.201013] pci 0000:00:16.3: reg 0x14: [mem 0xf323a000-0xf323afff]
[ 0.201114] pci 0000:00:19.0: [8086:153b] type 00 class 0x020000
[ 0.201128] pci 0000:00:19.0: reg 0x10: [mem 0xf3200000-0xf321ffff]
[ 0.201135] pci 0000:00:19.0: reg 0x14: [mem 0xf3239000-0xf3239fff]
[ 0.201141] pci 0000:00:19.0: reg 0x18: [io 0xf040-0xf05f]
[ 0.201192] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.201219] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 0.201246] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[ 0.201264] pci 0000:00:1a.0: reg 0x10: [mem 0xf3238000-0xf32383ff]
[ 0.201342] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.201378] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.201405] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[ 0.201416] pci 0000:00:1b.0: reg 0x10: [mem 0xf3230000-0xf3233fff 64bit]
[ 0.201476] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.201503] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.201526] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[ 0.201583] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.201611] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.201635] pci 0000:00:1c.3: [8086:244e] type 01 class 0x060401
[ 0.201692] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.201720] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.201750] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[ 0.201768] pci 0000:00:1d.0: reg 0x10: [mem 0xf3237000-0xf32373ff]
[ 0.201847] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.201883] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.201910] pci 0000:00:1f.0: [8086:8c50] type 00 class 0x060100
[ 0.202046] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
[ 0.202058] pci 0000:00:1f.2: reg 0x10: [io 0xf090-0xf097]
[ 0.202064] pci 0000:00:1f.2: reg 0x14: [io 0xf080-0xf083]
[ 0.202070] pci 0000:00:1f.2: reg 0x18: [io 0xf070-0xf077]
[ 0.202076] pci 0000:00:1f.2: reg 0x1c: [io 0xf060-0xf063]
[ 0.202081] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
[ 0.202087] pci 0000:00:1f.2: reg 0x24: [mem 0xf3236000-0xf32367ff]
[ 0.202118] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.202161] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 0.202173] pci 0000:00:1f.3: reg 0x10: [mem 0xf3235000-0xf32350ff 64bit]
[ 0.202190] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
[ 0.202273] pci 0000:01:00.0: [10de:11c0] type 00 class 0x030000
[ 0.202282] pci 0000:01:00.0: reg 0x10: [mem 0xf2000000-0xf2ffffff]
[ 0.202291] pci 0000:01:00.0: reg 0x14: [mem 0xe8000000-0xefffffff 64bit pref]
[ 0.202300] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.202306] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.202312] pci 0000:01:00.0: reg 0x30: [mem 0xf3000000-0xf307ffff pref]
[ 0.202361] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.202388] pci 0000:01:00.1: [10de:0e0b] type 00 class 0x040300
[ 0.202397] pci 0000:01:00.1: reg 0x10: [mem 0xf3080000-0xf3083fff]
[ 0.208685] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.208687] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.208689] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf30fffff]
[ 0.208737] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.208807] pci 0000:03:00.0: [8086:244e] type 01 class 0x060401
[ 0.208933] pci 0000:03:00.0: supports D1 D2
[ 0.208934] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.208954] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.208973] pci 0000:00:1c.3: PCI bridge to [bus 03-04] (subtractive decode)
[ 0.208977] pci 0000:00:1c.3: bridge window [mem 0xf3100000-0xf31fffff]
[ 0.208981] pci 0000:00:1c.3: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.208982] pci 0000:00:1c.3: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.208983] pci 0000:00:1c.3: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.208984] pci 0000:00:1c.3: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.208985] pci 0000:00:1c.3: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.208986] pci 0000:00:1c.3: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.208987] pci 0000:00:1c.3: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.208988] pci 0000:00:1c.3: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 0.208989] pci 0000:00:1c.3: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[ 0.208990] pci 0000:00:1c.3: bridge window [mem 0xd0000000-0xfeafffff] (subtractive decode)
[ 0.209061] pci 0000:04:00.0: [168c:002d] type 00 class 0x028000
[ 0.209095] pci 0000:04:00.0: reg 0x10: [mem 0xf3100000-0xf310ffff]
[ 0.209351] pci 0000:03:00.0: PCI bridge to [bus 04] (subtractive decode)
[ 0.209364] pci 0000:03:00.0: bridge window [mem 0xf3100000-0xf31fffff]
[ 0.209373] pci 0000:03:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[ 0.209374] pci 0000:03:00.0: bridge window [mem 0xf3100000-0xf31fffff] (subtractive decode)
[ 0.209375] pci 0000:03:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[ 0.209376] pci 0000:03:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[ 0.209377] pci 0000:03:00.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.209378] pci 0000:03:00.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.209379] pci 0000:03:00.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.209380] pci 0000:03:00.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.209381] pci 0000:03:00.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.209382] pci 0000:03:00.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.209383] pci 0000:03:00.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.209384] pci 0000:03:00.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 0.209385] pci 0000:03:00.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[ 0.209386] pci 0000:03:00.0: bridge window [mem 0xd0000000-0xfeafffff] (subtractive decode)
[ 0.209408] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[ 0.209784] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.209814] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.209842] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.209869] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.209897] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.209925] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.209954] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.209982] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.210114] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 0.210172] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.210173] vgaarb: loaded
[ 0.210173] vgaarb: bridge control possible 0000:01:00.0
[ 0.210188] PCI: Using ACPI for IRQ routing
[ 0.211404] PCI: pci_cache_line_size set to 64 bytes
[ 0.211442] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.211443] e820: reserve RAM buffer [mem 0xbb232000-0xbbffffff]
[ 0.211444] e820: reserve RAM buffer [mem 0xbc248000-0xbfffffff]
[ 0.211445] e820: reserve RAM buffer [mem 0xce79a000-0xcfffffff]
[ 0.211446] e820: reserve RAM buffer [mem 0xcf800000-0xcfffffff]
[ 0.211446] e820: reserve RAM buffer [mem 0x22e000000-0x22fffffff]
[ 0.211499] NetLabel: Initializing
[ 0.211500] NetLabel: domain hash size = 128
[ 0.211500] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.211507] NetLabel: unlabeled traffic allowed by default
[ 0.211519] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.211523] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.213540] Switched to clocksource hpet
[ 0.216475] pnp: PnP ACPI init
[ 0.216483] ACPI: bus type PNP registered
[ 0.216524] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.216527] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.216533] pnp 00:01: [dma 4]
[ 0.216544] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.216555] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.216614] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.216684] system 00:04: [io 0x0680-0x069f] has been reserved
[ 0.216686] system 00:04: [io 0xffff] has been reserved
[ 0.216687] system 00:04: [io 0xffff] has been reserved
[ 0.216688] system 00:04: [io 0xffff] has been reserved
[ 0.216689] system 00:04: [io 0x1c00-0x1cfe] has been reserved
[ 0.216690] system 00:04: [io 0x1d00-0x1dfe] has been reserved
[ 0.216691] system 00:04: [io 0x1e00-0x1efe] has been reserved
[ 0.216692] system 00:04: [io 0x1f00-0x1ffe] has been reserved
[ 0.216693] system 00:04: [io 0x1800-0x18fe] could not be reserved
[ 0.216695] system 00:04: [io 0x164e-0x164f] has been reserved
[ 0.216696] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.216715] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.216745] system 00:06: [io 0x1854-0x1857] has been reserved
[ 0.216746] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.216822] system 00:07: [io 0x0a00-0x0a0f] has been reserved
[ 0.216823] system 00:07: [io 0x0a30-0x0a3f] has been reserved
[ 0.216824] system 00:07: [io 0x0a20-0x0a2f] has been reserved
[ 0.216825] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.216983] pnp 00:08: [dma 0 disabled]
[ 0.217013] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.217187] pnp 00:09: [dma 0 disabled]
[ 0.217255] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.217285] system 00:0a: [io 0x04d0-0x04d1] has been reserved
[ 0.217286] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.217303] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.217561] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.217562] system 00:0c: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.217563] system 00:0c: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.217564] system 00:0c: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.217566] system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.217567] system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.217568] system 00:0c: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.217569] system 00:0c: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.217570] system 00:0c: [mem 0xff000000-0xffffffff] has been reserved
[ 0.217572] system 00:0c: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.217573] system 00:0c: [mem 0xf7fef000-0xf7feffff] has been reserved
[ 0.217574] system 00:0c: [mem 0xf7ff0000-0xf7ff0fff] has been reserved
[ 0.217575] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.217728] pnp: PnP ACPI: found 13 devices
[ 0.217729] ACPI: bus type PNP unregistered
[ 0.223413] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.223415] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.223417] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf30fffff]
[ 0.223421] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.223429] pci 0000:03:00.0: PCI bridge to [bus 04]
[ 0.223436] pci 0000:03:00.0: bridge window [mem 0xf3100000-0xf31fffff]
[ 0.223448] pci 0000:00:1c.3: PCI bridge to [bus 03-04]
[ 0.223452] pci 0000:00:1c.3: bridge window [mem 0xf3100000-0xf31fffff]
[ 0.223458] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.223459] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.223460] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.223461] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.223462] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.223463] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.223464] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.223465] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[ 0.223466] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[ 0.223467] pci_bus 0000:00: resource 13 [mem 0xd0000000-0xfeafffff]
[ 0.223468] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.223469] pci_bus 0000:01: resource 1 [mem 0xe8000000-0xf30fffff]
[ 0.223470] pci_bus 0000:03: resource 1 [mem 0xf3100000-0xf31fffff]
[ 0.223471] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.223472] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.223473] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.223474] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.223475] pci_bus 0000:03: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.223476] pci_bus 0000:03: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.223477] pci_bus 0000:03: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.223478] pci_bus 0000:03: resource 11 [mem 0x000e0000-0x000e3fff]
[ 0.223479] pci_bus 0000:03: resource 12 [mem 0x000e4000-0x000e7fff]
[ 0.223480] pci_bus 0000:03: resource 13 [mem 0xd0000000-0xfeafffff]
[ 0.223481] pci_bus 0000:04: resource 1 [mem 0xf3100000-0xf31fffff]
[ 0.223482] pci_bus 0000:04: resource 5 [mem 0xf3100000-0xf31fffff]
[ 0.223483] pci_bus 0000:04: resource 8 [io 0x0000-0x0cf7]
[ 0.223484] pci_bus 0000:04: resource 9 [io 0x0d00-0xffff]
[ 0.223485] pci_bus 0000:04: resource 10 [mem 0x000a0000-0x000bffff]
[ 0.223486] pci_bus 0000:04: resource 11 [mem 0x000d0000-0x000d3fff]
[ 0.223487] pci_bus 0000:04: resource 12 [mem 0x000d4000-0x000d7fff]
[ 0.223488] pci_bus 0000:04: resource 13 [mem 0x000d8000-0x000dbfff]
[ 0.223489] pci_bus 0000:04: resource 14 [mem 0x000dc000-0x000dffff]
[ 0.223490] pci_bus 0000:04: resource 15 [mem 0x000e0000-0x000e3fff]
[ 0.223491] pci_bus 0000:04: resource 16 [mem 0x000e4000-0x000e7fff]
[ 0.223492] pci_bus 0000:04: resource 17 [mem 0xd0000000-0xfeafffff]
[ 0.223506] NET: Registered protocol family 2
[ 0.223609] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.223730] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.223895] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.223910] TCP: reno registered
[ 0.223917] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.223944] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.223988] NET: Registered protocol family 1
[ 0.256980] pci 0000:01:00.0: Boot video device
[ 0.256994] PCI: CLS 64 bytes, default 64
[ 0.257020] Unpacking initramfs...
[ 0.294705] Freeing initrd memory: 3168K (ffff8800379c0000 - ffff880037cd8000)
[ 0.294716] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.294717] software IO TLB [mem 0xca79a000-0xce79a000] (64MB) mapped at [ffff8800ca79a000-ffff8800ce799fff]
[ 0.294842] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[ 0.294863] Scanning for low memory corruption every 60 seconds
[ 0.294994] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.303763] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.304553] zbud: loaded
[ 0.304660] VFS: Disk quotas dquot_6.5.2
[ 0.304681] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.304745] msgmni has been set to 15851
[ 0.304773] Key type big_key registered
[ 0.304856] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.304885] io scheduler noop registered
[ 0.304886] io scheduler deadline registered
[ 0.304909] io scheduler cfq registered (default)
[ 0.305005] pcieport 0000:00:01.0: irq 41 for MSI/MSI-X
[ 0.305115] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.305124] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.305139] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
[ 0.305140] vesafb: scrolling: redraw
[ 0.305141] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.305727] vesafb: framebuffer at 0xf1000000, mapped to 0xffffc90004e80000, using 8128k, total 8128k
[ 0.421564] Console: switching to colour frame buffer device 240x67
[ 0.536923] fb0: VESA VGA frame buffer device
[ 0.536932] intel_idle: MWAIT substates: 0x42120
[ 0.536933] intel_idle: v0.4 model 0x3C
[ 0.536934] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.537045] GHES: HEST is not enabled!
[ 0.537073] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.557614] 00:08: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.578155] 0000:00:16.3: ttyS1 at I/O 0xf0a0 (irq = 19, base_baud = 115200) is a 16550A
[ 0.578323] Linux agpgart interface v0.103
[ 0.578347] rtc_cmos 00:05: RTC can wake from S4
[ 0.578460] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.578493] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.578499] Intel P-state driver initializing.
[ 0.578506] Intel pstate controlling: cpu 0
[ 0.578516] Intel pstate controlling: cpu 1
[ 0.578525] Intel pstate controlling: cpu 2
[ 0.578533] Intel pstate controlling: cpu 3
[ 0.578547] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.578599] TCP: cubic registered
[ 0.578655] NET: Registered protocol family 10
[ 0.578791] NET: Registered protocol family 17
[ 0.579032] registered taskstats version 1
[ 0.579379] Magic number: 2:735:176
[ 0.579408] acpi device:39: hash matches
[ 0.579414] acpi device:0c: hash matches
[ 0.579465] rtc_cmos 00:05: setting system clock to 2014-06-26 11:10:28 UTC (1403781028)
[ 0.579516] PM: Hibernation image not present or could not be loaded.
[ 0.579998] Freeing unused kernel memory: 1116K (ffffffff818df000 - ffffffff819f6000)
[ 0.579999] Write protecting the kernel read-only data: 8192k
[ 0.581473] Freeing unused kernel memory: 912K (ffff88000151c000 - ffff880001600000)
[ 0.582105] Freeing unused kernel memory: 404K (ffff88000179b000 - ffff880001800000)
[ 0.586339] random: systemd-tmpfile urandom read with 65 bits of entropy available
[ 0.587122] systemd-udevd[58]: starting version 213
[ 0.595903] ACPI: bus type USB registered
[ 0.595926] usbcore: registered new interface driver usbfs
[ 0.595933] usbcore: registered new interface driver hub
[ 0.596405] usbcore: registered new device driver usb
[ 0.596719] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.596815] ehci-pci: EHCI PCI platform driver
[ 0.596919] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.596924] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.596934] ehci-pci 0000:00:1a.0: debug port 2
[ 0.597169] SCSI subsystem initialized
[ 0.598545] libata version 3.00 loaded.
[ 0.600825] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.600841] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf3238000
[ 0.600943] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.601297] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.601307] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.610538] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.610659] hub 1-0:1.0: USB hub found
[ 0.610663] hub 1-0:1.0: 2 ports detected
[ 0.610845] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.610849] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.610858] ehci-pci 0000:00:1d.0: debug port 2
[ 0.614752] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.614762] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf3237000
[ 0.623945] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.624126] hub 2-0:1.0: USB hub found
[ 0.624130] hub 2-0:1.0: 2 ports detected
[ 0.624306] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.624310] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.624428] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.624442] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
[ 0.624616] hub 3-0:1.0: USB hub found
[ 0.624632] hub 3-0:1.0: 12 ports detected
[ 0.625905] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.625908] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 0.626071] hub 4-0:1.0: USB hub found
[ 0.626082] hub 4-0:1.0: 6 ports detected
[ 0.626739] ahci 0000:00:1f.2: version 3.0
[ 0.626827] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 0.626869] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
[ 0.626871] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
[ 0.631106] scsi0 : ahci
[ 0.631237] scsi1 : ahci
[ 0.631544] scsi2 : ahci
[ 0.631847] scsi3 : ahci
[ 0.632048] scsi4 : ahci
[ 0.632210] scsi5 : ahci
[ 0.632245] ata1: SATA max UDMA/133 abar m2048@0xf3236000 port 0xf3236100 irq 43
[ 0.632247] ata2: SATA max UDMA/133 abar m2048@0xf3236000 port 0xf3236180 irq 43
[ 0.632247] ata3: DUMMY
[ 0.632248] ata4: DUMMY
[ 0.632249] ata5: DUMMY
[ 0.632249] ata6: DUMMY
[ 0.917514] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.950851] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.950865] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.951513] ata2.00: ATA-9: WDC WD10EZEX-08M2NA0, 01.01A01, max UDMA/100
[ 0.951515] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.952272] ata2.00: configured for UDMA/100
[ 0.965729] ata1.00: ATA-8: KINGSTON SV300S37A120G, 527ABBF0, max UDMA/133
[ 0.965731] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.975526] ata1.00: configured for UDMA/133
[ 0.975682] scsi 0:0:0:0: Direct-Access ATA KINGSTON SV300S3 527A PQ: 0 ANSI: 5
[ 0.976133] scsi 1:0:0:0: Direct-Access ATA WDC WD10EZEX-08M 01.0 PQ: 0 ANSI: 5
[ 0.979123] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 0.979131] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 0.979133] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 0.979142] sd 0:0:0:0: [sda] Write Protect is off
[ 0.979144] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.979150] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.979241] sd 1:0:0:0: [sdb] Write Protect is off
[ 0.979242] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 0.979260] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.979452] sda: sda1 sda2 sda3
[ 0.979690] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.992405] sdb: sdb1 sdb2 sdb3 sdb4
[ 0.992837] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.041522] hub 1-1:1.0: USB hub found
[ 1.041639] hub 1-1:1.0: 6 ports detected
[ 1.147659] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.271718] hub 2-1:1.0: USB hub found
[ 1.271809] hub 2-1:1.0: 6 ports detected
[ 1.297769] tsc: Refined TSC clocksource calibration: 3192.606 MHz
[ 1.431263] usb 3-5: new low-speed USB device number 2 using xhci_hcd
[ 1.537046] random: nonblocking pool is initialized
[ 1.556157] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 1.587430] systemd[1]: systemd 214 running in system mode. (+PAM -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ +SECCOMP -APPARMOR)
[ 1.587513] systemd[1]: Detected architecture 'x86-64'.
[ 1.588205] systemd[1]: Set hostname to <XSign>.
[ 1.614195] usb 3-5: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.626104] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 1.626132] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 1.626139] systemd[1]: Starting Remote File Systems.
[ 1.626581] systemd[1]: Reached target Remote File Systems.
[ 1.626590] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 1.626605] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 1.626610] systemd[1]: Starting Paths.
[ 1.626945] systemd[1]: Reached target Paths.
[ 1.626950] systemd[1]: Starting Encrypted Volumes.
[ 1.627363] systemd[1]: Reached target Encrypted Volumes.
[ 1.627373] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 1.628175] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 1.628182] systemd[1]: Expecting device dev-sdb4.device...
[ 1.628567] systemd[1]: Expecting device dev-sda1.device...
[ 1.628950] systemd[1]: Expecting device dev-sdb3.device...
[ 1.629332] systemd[1]: Starting Root Slice.
[ 1.632141] systemd[1]: Created slice Root Slice.
[ 1.632148] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 1.632697] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 1.632703] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 1.633212] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 1.633217] systemd[1]: Starting Delayed Shutdown Socket.
[ 1.633664] systemd[1]: Listening on Delayed Shutdown Socket.
[ 1.633669] systemd[1]: Starting Journal Socket (/dev/log).
[ 1.634133] systemd[1]: Listening on Journal Socket (/dev/log).
[ 1.634139] systemd[1]: Starting udev Control Socket.
[ 1.634558] systemd[1]: Listening on udev Control Socket.
[ 1.634564] systemd[1]: Starting udev Kernel Socket.
[ 1.634987] systemd[1]: Listening on udev Kernel Socket.
[ 1.634993] systemd[1]: Starting LVM2 metadata daemon socket.
[ 1.635469] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 1.635474] systemd[1]: Starting User and Session Slice.
[ 1.635984] systemd[1]: Created slice User and Session Slice.
[ 1.635990] systemd[1]: Starting Journal Socket.
[ 1.636382] systemd[1]: Listening on Journal Socket.
[ 1.636391] systemd[1]: Starting System Slice.
[ 1.636828] systemd[1]: Created slice System Slice.
[ 1.636837] systemd[1]: Started File System Check on Root Device.
[ 1.636841] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 1.637390] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 1.637397] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 1.638043] systemd[1]: Mounting Temporary Directory...
[ 1.639117] systemd[1]: Mounting Debug File System...
[ 1.639740] systemd[1]: Starting udev Coldplug all Devices...
[ 1.640987] systemd[1]: Started Load Kernel Modules.
[ 1.640998] systemd[1]: Mounted FUSE Control File System.
[ 1.641689] systemd[1]: Starting Apply Kernel Variables...
[ 1.642275] systemd[1]: Mounting POSIX Message Queue File System...
[ 1.642976] systemd[1]: Starting Setup Virtual Console...
[ 1.644065] EXT4-fs (sda2): re-mounted. Opts: data=ordered
[ 1.645742] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 1.646672] systemd[1]: Mounting Huge Pages File System...
[ 1.647253] systemd[1]: Mounting Configuration File System...
[ 1.648402] systemd[1]: Started Set Up Additional Binary Formats.
[ 1.648413] systemd[1]: Starting system-getty.slice.
[ 1.649035] systemd[1]: Created slice system-getty.slice.
[ 1.649044] systemd[1]: Starting Journal Service...
[ 1.649940] systemd[1]: Started Journal Service.
[ 1.684590] systemd-udevd[160]: starting version 214
[ 1.714384] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 1.714388] ACPI: Power Button [PWRB]
[ 1.714417] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.714419] ACPI: Power Button [PWRF]
[ 1.716491] pps_core: LinuxPPS API ver. 1 registered
[ 1.716493] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 1.716760] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.717286] PTP clock support registered
[ 1.718023] mei_me 0000:00:16.0: irq 44 for MSI/MSI-X
[ 1.721435] parport_pc 00:09: reported by Plug and Play ACPI
[ 1.721481] parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE]
[ 1.721541] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.721542] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
[ 1.721903] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.721917] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 1.748190] ACPI: Fan [FAN0] (off)
[ 1.748215] ACPI: Fan [FAN1] (off)
[ 1.748234] ACPI: Fan [FAN2] (off)
[ 1.748255] ACPI: Fan [FAN3] (off)
[ 1.748276] ACPI: Fan [FAN4] (off)
[ 1.749478] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.749479] ACPI: Thermal Zone [TZ00] (28 C)
[ 1.749609] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.749610] ACPI: Thermal Zone [TZ01] (30 C)
[ 1.757876] [drm] Initialized drm 1.1.0 20060810
[ 1.767187] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 1.774098] cfg80211: Calling CRDA to update world regulatory domain
[ 1.774823] usb 3-6: new full-speed USB device number 3 using xhci_hcd
[ 1.795673] Adding 16002224k swap on /dev/sdb4. Priority:-1 extents:1 across:16002224k FS
[ 1.801517] microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x9
[ 1.805001] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 1.806877] microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x9
[ 1.806888] microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x9
[ 1.806895] microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x9
[ 1.806928] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 1.823570] AVX2 version of gcm_enc/dec engaged.
[ 1.849773] nvidia: module license 'NVIDIA' taints kernel.
[ 1.849774] Disabling lock debugging due to kernel taint
[ 1.856456] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[ 1.856549] ppdev: user-space parallel port driver
[ 1.856785] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:01:00.0 on minor 0
[ 1.856789] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 337.25 Tue May 27 11:05:28 PDT 2014
[ 1.993532] e1000e 0000:00:19.0 eth0: registered PHC clock
[ 1.993533] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 74:d4:35:86:a4:73
[ 1.993534] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.993584] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[ 1.993718] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 1.993806] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 1.993810] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 1.993950] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
[ 1.994002] ACPI Warning: SystemIO range 0x000000000000f000-0x000000000000f01f conflicts with OpRegion 0x000000000000f000-0x000000000000f00f (\_SB_.PCI0.SBUS.SMBI) (20140214/utaddress-258)
[ 1.994003] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.996461] iTCO_vendor_support: vendor-support=0
[ 1.996939] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 1.996968] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[ 2.005457] sound hdaudioC0D2: autoconfig: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[ 2.005458] sound hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 2.005459] sound hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 2.005459] sound hdaudioC0D2: mono: mono_out=0x0
[ 2.005460] sound hdaudioC0D2: dig-out=0x11/0x1e
[ 2.005460] sound hdaudioC0D2: inputs:
[ 2.005461] sound hdaudioC0D2: Rear Mic=0x18
[ 2.005462] sound hdaudioC0D2: Front Mic=0x19
[ 2.005462] sound hdaudioC0D2: Line=0x1a
[ 2.005463] sound hdaudioC0D2: CD=0x1c
[ 2.005463] sound hdaudioC0D2: dig-in=0x1f
[ 2.008421] systemd-udevd[162]: renamed network interface eth0 to eno1
[ 2.019322] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D2/input6
[ 2.020297] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 2.020335] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 2.020370] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 2.020403] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 2.020435] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 2.020468] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 2.026197] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: data=ordered
[ 2.132907] systemd-journald[153]: Received request to flush runtime journal from PID 1
[ 2.157519] ath: EEPROM regdomain: 0x809c
[ 2.157520] ath: EEPROM indicates we should expect a country code
[ 2.157520] ath: doing EEPROM country->regdmn map search
[ 2.157520] ath: country maps to regdmn code: 0x52
[ 2.157521] ath: Country alpha2 being used: CN
[ 2.157521] ath: Regpair used: 0x52
[ 2.160431] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 2.160562] ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xffffc90006800000, irq=19
[ 2.181947] systemd-udevd[162]: renamed network interface wlan0 to wlp4s0
[ 2.298729] Switched to clocksource tsc
[ 2.376487] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[ 2.376547] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[ 2.376591] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[ 2.376632] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[ 2.560514] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[ 3.062601] nvidia 0000:01:00.0: irq 47 for MSI/MSI-X
[ 3.592415] NVRM: Your system is not currently configured to drive a VGA console
[ 3.592417] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[ 3.592418] NVRM: requires the use of a text-mode VGA console. Use of other console
[ 3.592419] NVRM: drivers including, but not limited to, vesafb, may result in
[ 3.592420] NVRM: corruption and stability problems, and is not supported.
[ 7.032503] usb 3-6: unable to read config index 0 descriptor/all
[ 7.032509] usb 3-6: can't read configurations, error -110
[ 7.299384] usb 3-11: new high-speed USB device number 5 using xhci_hcd
[ 7.769759] usb 3-6: new full-speed USB device number 6 using xhci_hcd
[ 7.973941] hidraw: raw HID events driver (C) Jiri Kosina
[ 7.986288] usbcore: registered new interface driver usbhid
[ 7.986290] usbhid: USB HID core driver
[ 7.987065] input: HID 046a:0011 as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.0/0003:046A:0011.0001/input/input17
[ 7.987234] hid-generic 0003:046A:0011.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 046a:0011] on usb-0000:00:14.0-5/input0
[ 7.987314] input: Razer Razer DeathAdder as /devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.0/0003:1532:0016.0002/input/input18
[ 7.987439] hid-generic 0003:1532:0016.0002: input,hidraw1: USB HID v1.11 Mouse [Razer Razer DeathAdder] on usb-0000:00:14.0-6/input0
[ 7.989050] mousedev: PS/2 mouse device common for all mice
[ 8.124996] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 8.136818] usb 3-11: reset high-speed USB device number 5 using xhci_hcd
[ 8.136826] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 4.
[ 8.136827] usb 3-11: hub failed to enable device, error -22
[ 8.226730] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 8.226799] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 8.296772] usb 3-11: reset high-speed USB device number 5 using xhci_hcd
[ 8.296839] xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 4.
[ 8.296841] usb 3-11: hub failed to enable device, error -22
[ 8.456902] usb 3-11: reset high-speed USB device number 5 using xhci_hcd
[ 8.481367] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880219f95848
[ 8.481369] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880219f95800
[ 8.481370] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880219f95890
[ 8.481371] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880219f958d8
[ 8.481372] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880219f95920
[ 8.481373] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880219f95968
[ 8.481374] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880219f959b0
[ 8.481751] ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[ 8.491510] ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 0005 detected
[ 8.491667] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 8.491846] usbcore: registered new interface driver rt2800usb
[ 8.527024] systemd-udevd[163]: renamed network interface wlan0 to wlp0s20u11
[ 37.746771] fuse init (API version 7.23)
[ 162.364940] ieee80211 phy1: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[ 162.368409] ieee80211 phy1: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[ 162.630888] IPv6: ADDRCONF(NETDEV_UP): wlp0s20u11: link is not ready
[ 165.603287] IPv6: ADDRCONF(NETDEV_UP): wlp0s20u11: link is not ready
[ 165.711742] e1000e: eno1 NIC Link is Down
[ 165.815617] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 165.917212] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 165.917299] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 166.200400] IPv6: ADDRCONF(NETDEV_UP): wlp0s20u11: link is not ready
[ 169.526968] wlp0s20u11: authenticate with f8:d1:11:e0:43:42
[ 169.559811] wlp0s20u11: send auth to f8:d1:11:e0:43:42 (try 1/3)
[ 169.561558] wlp0s20u11: authenticated
[ 169.563460] wlp0s20u11: associate with f8:d1:11:e0:43:42 (try 1/3)
[ 169.566987] wlp0s20u11: RX AssocResp from f8:d1:11:e0:43:42 (capab=0x431 status=0 aid=2)
[ 169.569703] wlp0s20u11: associated
[ 169.569713] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s20u11: link becomes ready
[ 169.601748] wlp0s20u11: Limiting TX power to 20 (20 - 0) dBm as advertised by f8:d1:11:e0:43:42

What Wireless Card for Satellite A10-S213

Hi,
My laptop is A10-S213. I am going to go wireless next week. I think I need to buy a wireless card in order to be wireless enabled. Could someone tell me _*WHAT*_ kind of card should I buy and _*WHERE*_ would be the best value place to get it from?
P.S.: I checked the product specification, it says 802.11b.
Many thanks.
Florence

Hello
According notebook specification your A10 is WLAN ready and it can be upgraded with WLAN card.
As compatible cards I have founded Wireless LAN card PA3212U-4MPC (Agere 802.11b) and PA3273U-2MPC (802.11a/b). Google a little bit around and pick up info about price and shops where you can order it.
Bye and good luck!

Intel pro wireless card can not connect

Since some weeks, i can not use my wireless network, it does not associate the access point.
The cared is a intel pro, using the agn driver.
I can not connect to my wep key protected home network, or public, unprotected accesspoints.
I tried various parameters with iwconfig, without success, so I assume the kernel module is broken.
Any help would be appreciated.

B wrote:
sredna wrote:Yes, I read the wiki page. Yes, everything is installed. It worked for a long time. I read the various manuals. I do it the correct, recomended way. It just does not work.
Rather than blaming devs for putting out faulty software, if I were you I'd look at myself - the PEBKAC problem . So an upgrade broke it. When was this? What packages where upgraded? Check your pacman log (yes, it exists).
You are aware the module name for Intel's wireless cards changed? Instead of referring to the card model it's now iwlcore and iwlagn. But then again, if you let udev figure it out, there shouldn't be the slightest problem in that upgrade.
Care to share any of your cherished errors? Without them there's not much we can do. The BBS has been out of crystal bowls for a long time.
Dear mr. B, I do not blame anybody anything. I report, as is, it does not work. On my system, in the hope that someone have something meaningful to say, not because I hoped for you to call me names. I do not know what your acronym means, and I do not wish to find out, since it appearently is there to make me less. I do not care for that.
The kernel modules that are loaded on my system, and was back when I had working wifi support, are iwlcore and iwlagn. I do not know that the iwlwifi-4965-ucode package is used for anything, I installed it because the before-mentioned wiki page recommends that, and I did get working support. I do not try to configure it by hand, I trust udev/hal/whatever is there to handle the hardware.
But, sorry for repeating, since some time, I can not connect to an access point. No matter if I try cli commands or use wicd or networkmanager applets. The result appears to be the same, there is no error from iwconfig, which does not succeed.
I can't even remember the date it went wrong, but i know that the kernel was updated as a part of that particular update. rolling back the kernel did not help though.

What wireless card do I put in my HP PAVILION DV6748US ENTERTAINMENT NOTEBOOK PC? Have 2 options.

I need to replace the wireless card in my notebook but I don't know which to choose. There's the Broadcom 4311AG Wireless LAN 802.11a/b/g mini PCI adapter card(Bevo) - 54Mbps data rate, 2.4GHz operating frequency range - For Rest of World (ROW) or the Broadcom 4321AGN 802.11a/b/g/draft-n mini-PCI adapter card - For Most of the world MOW. I don't know which one to pick.

It is a standard laptop 2.5 inch wide SATA hard drive like shown in this picture:
Look at Page 9 of this Manual:
Drive Manual
This will show how to replace it. Do you have the recovery disks that you could have made when the laptop was new? If not you are going to have to get a Windows disk or some HP recovery disks.
Here is a drive that would work for you.
160 gig 7200 rpm drive for $45
This drive will be faster than what you had and is a bit larger. A very good deal for the price. You perhaps already have a second hard drive in the system. See the manual on page 9 for the location of both hard drive bays. You could move the secondary drive (if there is one) over into the primary position without spending a nickel. In fact, that is a great idea. If you do that and still get the BSOD, then it might well be something else going on other than the hard drive. The hard drive is a likely issue but it could also be the memory and other things, too. However, I think the second drive is only found in the dx9000 models so do not be shocked if you do not have a secondary hard drive bay in your machine. I have never seen a dx6000 series but am pretty sure it is a lot like the dv6000 series of which I have seen more than my share. They have a lot of issues and I am concerned you will be spending money on a new hard drive that will not fix anything.
Feel free to post back with issues or questions.

What wireless router would be good to use with OS 10 Lion at home?

I have a Mac Book Pro with Leapard and I just recently purchaced a iMac with Lion. I want to set up a wireless network with my provider, in my house. What wireless router should I use that is compatable with Lion OS?

Virtually any modern wireless router that has its latest Firmware updates should work fine. I myself have been extremely pleased with my Apple Airport Extreme wireless router, but spending that much money is not necessary.
Hope this helps

What wireless card works well with Arch?

Hello there
I recently finished building my quad-core (yay!) pc and because I don't want to run a long ethernet cable across the house, I was wondering if you guys knew any wireless cards I could use for my desktop (PCI/PCI-Express) that would work well with arch. I'd prefer to order it over the internet, and don't want to spend more than $100 (tax/shipping included). I know there was an earlier thread about this, but I didn't want to revive it and I also had some "requirements" in which I pick out. All help is appreciated
Last edited by itsbrad212 (2010-03-23 03:30:35)

655321 wrote:
Atheros Wireless cards work great on linux, I searched some on amazon for you there are some very good picks. They have extended range also
http://www.amazon.com/s/ref=nb_sb_noss? … ci&x=0&y=0
Thanks I'll have a look at those. I have had great experiences with atheros cards on my laptop so hopefully these will act the same
Last edited by itsbrad212 (2010-03-23 04:54:58)

What video cards can i put in my MSI FM2-A85XMA-E35

will the new card like r9 270, 270x, 280x, 290, 290x will work on this motherboard or only 7800 series or above. i trying to find a video card to play and stream bf4?? or what nvdia cards will work?

Quote from: Vegeta100 on 14-November-13, 02:08:24
wow thank u very much wow. i am handicap so i am not a computer guy. thanks again do u think i should wait for black friday or cyber monday and my budget is 200 if they dont drop maybe 270x i will buy
They will always be dropping in price and there will always be something faster coming out next month, but it's not a bad idea to wait for black friday or cyber monday. My normal advice is buy as much card as you can afford today and be happy.
$200 range, I'd look at this http://www.newegg.com/Product/Product.aspx?Item=N82E16814127761
It's a great card, I'm running a pair of last year's models at 5760x1080, medium to high on most games with some eye candy turned on. A single card should perform great at your resolution.

Wireless Router can't see other computers on network

I have a home network set up as follows:
Cable modem connected to a VOIP modem then it is connected to a 8 port switch.
I have 2 computers and a Linksys wireless router connected to the switch.
The 2 computers can see each other on the network.
When I connect to the wireless router I can access the internet but cannot see the other two computers on the network.
When I connect to the switch via a wire I can see the network.
Is the wireless router blocking my access to the network?
What can I do to be able to see the network through the wireless router?
Thanks,
Jethro

Do this

HT1338 How can I softwere update using celluare network on my i phone 4s

I want to iso7 on my i phone4s and I would like to use cellular network for tht but is shows only connect to wifi but I don't want to use wifi or pc I want use cellular network for tht procencse

Click here, install the DVD, run Software Update, open the Mac App Store, and try purchasing Mountain Lion. If you get told it's incompatible, phone the online Apple Store and order a download code for Lion.
(89308)

What wireless card can enable my U530 use 5GHz network

Similar Messages

Maybe you are looking for