What would be the command to uncheck Automatic Proxy Configuration?
Looking for a script to uncheck the Automatic Proxy Configuration field so I don't have to touch every mac individually.
I tried networksetup -setsocksfirewallproxystate Ethernet off which ran successfully but doesn't appear to have done anything.
Figured it out networksetup -setautoproxystate Ethernet off
Similar Messages
-
Automatic Proxy Configuration keeps getting disabled for Manual Proxy Configuration
When ever I launch Firefox 3.6.13, the connection settings get reset to Manual Proxy Configuration. I switch the connection settings to automatic proxy configuration and all works fine. Upon closing and re-launching Firefox the Connection Setting is set back to manual proxy configuration.
See http://kb.mozillazine.org/Preferences_not_saved
-
What would be the best way to install Arch, if I have Broadcom wifi?
I can boot into an Arch USB disk, but I can't connect to the Internet, since my laptop doesn't have ethernet and the wifi card is Broadcom, which requires the `broadcom-wl` package. What would be the easiest way of proceeding with this install? On IRC, I was advised to either: (1) boot into another distro, connect to the Internet there, then chroot into the Arch USB image, and download the additional packages from there, or (2) download the `broadcom-wl` package from the AUR, and a build environment, transfer these files to the USB system, and then compile and install the module there. Both of these solutions seems rather complicated to me. With (1), I was having difficulty mounting the arch .img as a drive using Ubuntu, since Ubuntu's `mount` command needs a filetype, and didn't seem to like any of the filetypes I tried. With (2), I have a feeling this would be fairly complicated--I'm not sure which binaries I can install for my system, or how to install packages that I downloaded offline.
I was having difficulty mounting the arch .img as a drive using Ubuntu, since Ubuntu's `mount` command needs a filetype
Not sure what you mean?
I too had issues with my internet, eventually I installed arch from Ubuntu. I used bootstrap image and it worked as advertized in the wiki.
EDIT: If you using Ubuntu then don't forget to create '/run/shm' otherwise pacstrap will fail.
Last edited by fantab (2014-10-29 04:17:46) -
BSM Auditing - what would be the Audit_id ?
Hi all,
Please tell me what would be the audit_id in the following scenario.
I have two nodes, say Node1 and Node2
On Node1_
I have created a role called *audit_role*
I have assigned audit_role to user called test on Node1.
These are the contents of the /etc/user_attr
root::::auths=solaris.*,solaris.grant;profiles=Web Console Management,All;lock_after_retries=no;min_label=admin_low;clearance=admin_high
audit_role::::type=role;defaultpriv=basic,dtrace_kernel,dtrace_proc,proc_owner,dtrace_user
test::::type=normal;roles=audit_role
On Node2_
I have logged in to Node2 as a user called *user1*.
Now audit_id on Node2 would be *user1*.
After this I have logged in to user *test* on same node(Node2) using the command *su*.
Now If login to the Node1 as role *audit_role* what would be the audit_id on the Node1.
#*Ssh l audit_role Node1*
After successful login on Node1 as audit_role, if some action were carried out with this login what would be the audit_id on Node1 for these actions? Whether it would be user1 or test?
please do reply if post is not clear.
thanks,
RajeshwarRegarding your function hanging, that seems to be because your loop never ends. Also the inner query is missing a WHERE clause:
Select Translate(comnt_rec.comment_text,'%#$^',' ') into repvalue from test_comnt; <-- How many rows will this bring back?However I don't think you meant to query the test_comnt table at all - it looks as though you just wanted to assign the result of the TRANSLATE expression (btw please, TRANSLATE() or translate() but not Translate() - the parser doesn't care but it drives me nuts), in which case just
repvalue := translate(comnt_rec.comment_text,'%#$^',' ');or even include the expression in the cursor itself and save yourself the trouble.
Another thing that drives me nuts, although not the rest of the world apparently, is the name "c1" for a cursor. Why don't you name your variables "v1", "v2" etc? If you had two cursors would you seriously name the second one "c2"?
While I'm at it, what kind of a name is "test_comnt"? -
I am trying to set an open DNS using the MacAir. But when I tried to flush the existing one at utilities/terminal, it will not work. I am using Yosemite. May I know what should be the command line so that I can shift to an open DNS? Thanks
>SystemPreferences>Network>DNS
-
I want to delete my icloud-account from my iphone 5 and then register again, because I want to change my email-address/account name. What would be the steps to follow? How do I make sure I do not lose any information stored on/in my iphone 5?
You would have to delete the existing iCloud account and create a wholly new one - you cannot change the @icloud.com email address of the one you already have. To make a new one, you will also need an new AppleID as any AppleID can only have one iCloud account associated with it.
Deleting the account will not delete anything off your device (if prompted for things like contacts, choose to keep them). You will have to sync everything anew with the new account as you cannot move your sync'd content, your old backups or anything else from one iCloud account to another. You will have to set up sync again and let it sync to the new account, and then make new backups to the new account as well. -
I thought elements were simple but maybe it is just me. Having problems moving photos from iphoto to elements
Duplicate post; see:
had a windows computer with my element 7. Now just bought a Mac OSX version 10.9.2 what would be the best photoshop elements for this machine. I did download elements 12 from Apple store but kept getting incompatible message when trying to open a phot -
Apple loop index folder is empty from the hard drive, which may explain why i can not find loop in my logic pro browser, just sort of grey in disaabled format. what would be the next appropriate steps to take??? I do have an external back up disk.
The IDE interface that the iBook and your desktop use are the same, just a different plug size. So with the rite adapter you could put the iBooks drive in your desktop, you could even boot off it too.
If you want to install the laptops HD in your desktop this will do it for you. Or you can use the iBooks HD as an external hard drive with this -
Looking to upgrade my OS from 10.5.8 to something newer, what would be the best option?
I would like to upgrade my operating system, but not sure what would be the best option. I have had the computer for several years and haven't had a problem, I just think it's time to upgrade. Any suggestions?
Which model iMac do you have?
The best option would be the one (OS) that meets your needs of what you want to do AND if you meet ALL the OS system requirements. Suggest that you read the system requirements of the OS you are interested in to make sure you meet all the requirements both hardware & software. -
I have a 15' Macbook Pro, mid 2010 running Mavericks. I want to upgrade the hardware by increasing the RAM to 8GB and replacing the HD for a SDD one. What would be the best way to install mavericks on the new HD? I have the original OS X CD.
From what I read, I have 2 choices: 1. to install OSX and then upgrade to Mavericks, but I'm not sure if this would be possible (to upgrade directly from OSX to Mavericks); and 2. to use a software called Super Duper.
I wouldn't like to have to use a third party software to do this, so the question is: is there a better way to install directly the Mavericks not having to use a third party software?Install the new drive in the computer.
Install the old drive in an external USB or Firewire enclosure.
Boot the computer from the Recovery HD on the external drive.
Use Disk Utility to partition and format the new internal drive.
Clone your external drive to the internal drive.
How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the Recovery HD on the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the Recovery HD then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your new hard drive (this is the entry with the
mfgr.'s ID and size) from the left side list. Note the SMART status of
the drive in DU's status area. If it does not say "Verified" then the drive
is failing or has failed and will need replacing. Otherwise, click on the
Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from
the drop down menu to one. Set the format type to Mac OS Extended
(Journaled.) Click on the Options button, set the partition scheme to
GUID then click on the OK button. Click on the Partition button and
wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the
drive entry) from the left side list. Click on the Erase tab in the DU main
window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the
Options button, check the button for Zero Data and click on OK to
return to the Erase window.
6. Click on the Erase button. The format process can take up to several
hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
1. Using Disk Utility still opened.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the
Destination entry field.
6. Select the source volume from the left side list and drag it to the
Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive. Source means the old external drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer. -
Does Adobe Reader for iOS have the ability to open inbedded links created with Acrobat Standard to additional PDF docs? If not, then what would be the best way to use these already created PDF's on an I Pad?
driddy61,
As of June 2014, none of the Adobe Reader mobile products support the hyperlink action for opening a separate PDF document.
Adobe Reader for iOS
Adobe Reader for Android
Adobe Reader Touch for Windows 8
In addition, the Reader mobile products do not open multiple windows/documents simultaneously, which would make the navigation between PDF documents nearly impossible. (Once a hyperlink takes you to a different PDF document, you have no way to go back to the original PDF document.)
The only Adobe Reader product that fulfills your department's requirements is Adobe Reader XI (mostly for Windows/Mac desktop/laptop computers). Acrobat Pro and Standard are paid products.
Because you are in search of a less expensive device for your department, you could get a Windows tablet instead of a Windows desktop/laptop computer. Microsoft Surface Pro (that you've mentioned in your previous reply) is just one example. You can also find other less expensive Windows tablets.
Tablets
However, please keep in mind that there are two different types of Windows tablets running two different operating systems.
(a) A Windows tablet with an Intel-based processor running Windows 8.1 Pro
Example: Surface Pro 3
You can install and run traditional desktop apps (e.g. Adobe Reader XI) and new Windows Store apps ("Modern" or "Metro-style" apps).
(b) A Windows tablet with an ARM-based processor running Windows RT 8.1
Example: Surface 2
You can only install and run Windows Store apps (e.g. Adobe Reader Touch) but not traditional desktop apps like Adobe Reader XI.
In general, type (b) tablets are more affordable than type (a) tablets. However, if you want to run Adobe Reader XI, you do need to check the technical specification of each tablet and make sure the following conditions are met.
Processor: Intel
Operating system: Windows 8/8.1 or Windows 8/8.1 Pro, not RT
Hope this helps you choose the right device for your department. Please let us know if you have any questions about system requirements or supported features in the Adobe Reader products. -
I HAVE A MAC POWERBOOK G4 AND WOULD LIKE TO TRANSFER MY FILES, PHOTOS AND VIDS TO MY NEW MAC PRO, WHAT WOULD BE THE BEST METHOD?? THANKS ROB
I think the easiest way is to use a firewire cable (you will need on like this: http://www.google.com/products/catalog?q=Firewire+400+to+800+cable&oe=utf-8&rls= org.mozilla:en-US:official&client=firefox-a&um=1&ie=UTF-8&tbm=shop&cid=120962573 04625337030&sa=X&ei=PytQT9r4NtOBsgL9s_C6Dg&ved=0CHYQ8gIwAA).
Power up the Power Mac G4 and hold the "T" key while it is booting (this puts the G4 notebook in Firewire Target Disk mode). Connect the G4 notebook to the newer MacBook Pro and use the Migration assistant (/Applications/Utilities) OR browse through the files and copy what you want. -
With SO MUCH photo editing software available, what would be the best for me if I am a digital camera newby? I do not need Photoshop CC! I do not want to spend $700 bucks! My camera is a Nikon D90. Please help.
Where did you come up with the $700 figure?
Photography plan - $9.99/month or $119/year - Creative Cloud Photography plan : Adobe Creative Cloud
Single App - $19.99/month
Complete plan - $49.99/month or $599/yr - Creative Cloud free trial & plans : Adobe Creative Cloud
Ah - If you wish to cancel early yeah $74.99 which would total for the year at $899.88. But that final total would be if you canceled in the 12th month but if you plan on keeping it that long might as well go for the annual contract. Then cancel at the end of the term limit if you need to.
If you are not sure what to get, Either Elements as was suggested by Peru Bob or the photography plan. -
How do I get an SVG file to the same color profile as my illustrator file (U.S. Web Coated (SWOP) v2 and what would be the correct color profile for printing on a shirt?
Thank you.dadanas wrote:
Hi Simcah, I have a similar problem. Have you found out any solution?
thanks, dan
You need to ask the printing service provider. Dealing with color totally depends on the printing process involved and of course the machines used. -
What would be the reason for sql server agent [MSSQLSERVER] service terminated unexpectedly?
What would be the reason for sql server agent [MSSQLSERVER] service terminated unexpectedly?
only below details found in error log
07:26:44.170 spid60
FILESTREAM: effective level = 3, configured level = 3, file system access share name = 'MSSQLSERVER'.
07:26:45.720 spid51
Configuration option 'Agent XPs' changed from 0 to 1. Run the RECONFIGURE statement to install.
07:26:45.730 spid51
FILESTREAM: effective level = 3, configured level = 3, file system access share name = 'MSSQLSERVER'.
07:28:57.840 spid64
Configuration option 'Agent XPs' changed from 1 to 0. Run the RECONFIGURE statement to install.
07:28:57.840 spid64
FILESTREAM: effective level = 3, configured level = 3, file system access share name = 'MSSQLSERVER'.
and below error on agent log
2014-01-01 07:26:28 - ? [131] SQLSERVERAGENT service stopping due to a stop request from a user, process, or the OS...
2014-01-01 07:26:43 - + [188] Scheduler engine timed out (after 15 seconds) waiting for 1 jobs(s) to stop
2014-01-01 07:26:44 - + [098] SQLServerAgent terminated (forcefully)
RahulWhat would be the reason for sql server agent [MSSQLSERVER] service terminated unexpectedly?
only below details found in error log
07:26:44.170 spid60
FILESTREAM: effective level = 3, configured level = 3, file system access share name = 'MSSQLSERVER'.
07:26:45.720 spid51
Configuration option 'Agent XPs' changed from 0 to 1. Run the RECONFIGURE statement to install.
07:26:45.730 spid51
FILESTREAM: effective level = 3, configured level = 3, file system access share name = 'MSSQLSERVER'.
07:28:57.840 spid64
Configuration option 'Agent XPs' changed from 1 to 0. Run the RECONFIGURE statement to install.
07:28:57.840 spid64
FILESTREAM: effective level = 3, configured level = 3, file system access share name = 'MSSQLSERVER'.
and below error on agent log
2014-01-01 07:26:28 - ? [131] SQLSERVERAGENT service stopping due to a stop request from a user, process, or the OS...
2014-01-01 07:26:43 - + [188] Scheduler engine timed out (after 15 seconds) waiting for 1 jobs(s) to stop
2014-01-01 07:26:44 - + [098] SQLServerAgent terminated (forcefully)
Rahul
Can you post the output of below query
select @@version.
If you are using SQl server express edition ,SQL server agent feature is not available.It seems from errorlog that you can start it but actually you cannot.But first confirm what is version and edition of your SQL server
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers
Maybe you are looking for
-
How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?
-
Hey guys I got a used iBook from a family friend that has it password protected.I can't update or delete programs or download anything without the passwords and he doesn't remember them.Is there any way for me to get around these without wiping the c
-
DAMN NullPointerException !! How do i get rid of it?
Hi, My code compiles perfect, but when i run my program i get a "NullPointerException". I spent way too long and dont think I'll ever figure it out. Im hoping somebody can see whats wrong. It happens when I try to assign values to my array of objects
-
Almost Christmas - I need Elves!!! Help with my Ipad gift
Happy Holidays all!!! I bought my boyfriend an IPAD for Christmas and saw somewhere an Audiobook for Texas Hold Em Poker. He wants to learn to play the game better but it needs to be an audiobook. I actually bought him the IPAD primarily for this rea
-
Web Service connector using ICF
I'm starting to look at developing a connector for a web service. I have heard that the GTC connectors are going away in the next release and that all new development should be made within the ICF. I'm just beginning to start to go through the docume