What would be the correct workflow to go from XDCAM to Apple Prores?

I would expect I would need to export to Raw DV via the clip browser, and take that to Apple Prores via Compressor. Is this correct? What about the audio?
Thanks in advance.

Uhm...no. Going from XDCAM (HD) to DV would be the worse thing to do. Not sure what you mean by RAW DV, but DV is 720x480, highly compressed SD. The lowest form of SD next to S-VHS. DOn't to that to your HD.
Get the Log and Transfer plugin from SONY and use LOG AND TRANSFER to convert the footage to ProRes directly from the card or card dumps.
Shane

Similar Messages

How do I get an SVG file to the same color profile as my illustrator file (U.S. Web Coated (SWOP) v2 and what would be the correct color profile for printing on a shirt?

How do I get an SVG file to the same color profile as my illustrator file (U.S. Web Coated (SWOP) v2 and what would be the correct color profile for printing on a shirt?
Thank you.

dadanas wrote:
Hi Simcah, I have a similar problem. Have you found out any solution?
thanks, dan
You need to ask the printing service provider. Dealing with color totally depends on the printing process involved and of course the machines used.

What would be the best way to trigger a series of cascading SPD workflows ?

I have a request to have security setup on a series of folders..
but the start of the security has to wait until the new site workflow is completed, then once the site is available then the next workflow sets the security on the 1st folder then once the security WF on the 1st folder is completed, then the
2nd workflow starts, and sets up the security for the 2nd folder, then once that workflow is done then the 3rd folders security workflow is triggered and security is setup , then the 4th WF starts once the 3rd WF is completed, and then the security
is set on the 4th WF, and then once it is completed then the 5th WF is started... this pattern continues until the last folder security is setup and then the WF to email me is triggered..
basically they go like this
1WF > 2WF > 3WF > 4WF > 5WF > 6WF > 30Wf completed cycle of Security Setup
What would be the best way to set this up to have the series of workflows trigger after a WF is completed

Hi,
According to your post, my understanding is that you want to trigger a series of cascading SharePoint workflows.
You need to set parameter: Processed = No/false in each workflow to trigger the next one.
It is similar to the For Each loop workflow in SharePoint 2010.
For more information, you can refer to:
How-To: For Each loop with SharePoint Designer 2010 Workflows to update multiple items
Best Regards,
Linda Li
Linda Li
TechNet Community Support

I have a desktop Mac OS X Leopard. I want to upgrade to Quicken 2007, Install Snow Leopard and download iLife '11. I heard that Quicken and Snow Leopard can clash and have problems. What would be the best order for installing these products. Thank You.

I have a desktop MAC OSX Leopard. I want to upgrade to Quicken 2007, install Snow Leopard, download iLife'11. I heard that Quicken and Snow Leopard can clash..........that is why I am upgrading Quicken. What would be the best order of installing these products. I have gotten defferent opinions and I want to be sure I install them correctly.
Thank You.

First, install OS X, then install your third-party software.
How to Install OS X Updates Successfully
A. Repair the Hard Drive and Permissions:
Boot from your current OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
B. Make a Bootable Backup Using Restore Option of Disk Utility:
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the
      Destination entry field.
6. Select the source volume from the left side list and drag it to the
      Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal
startup drive.
C. Important: Please read before installing:
1. If you have a FireWire hard drive connected, disconnect it before installing the
      update unless you will boot from this drive and install the update on it.
      Reconnect it and turn it back on after installation is complete and you've
      restarted.
2. You may experience unexpected results if you have installed third-party system
       software modifications, or if you have modified the operating system through
       other means. (This does not apply to normal application software installation.)
3. The installation process should not be interrupted. If a power outage or other
      interruption occurs during installation, use the standalone installer (see below)
      from Apple Downloads to update. While the installation is in progress do not use
      the computer.
D. To upgrade:
Purchase the Snow Leopard Retail DVD.
Boot From The OS X Installer Disc:
      1. Insert OS X Installer Disc into the optical drive.
      2. Restart the computer.
      3. Immediately after the chime press and hold down the "C" key.
      4. Release the key when the spinning gear below the dark gray Apple
          logo appears.
      5. Wait for installer to finish loading.
      6. Follow instructions.
After installing Snow Leopard you should update it by downloading and installing Mac OS X 10.6.8 Update Combo v1.1.

I want to delete my icloud-account from my iphone 5 and then register again, because I want to change my email-address/account name. What would be the steps to follow? How do I make sure I do not lose any information stored on/in my iphone 5?

I want to delete my icloud-account from my iphone 5 and then register again, because I want to change my email-address/account name. What would be the steps to follow? How do I make sure I do not lose any information stored on/in my iphone 5?

You would have to delete the existing iCloud account and create a wholly new one - you cannot change the @icloud.com email address of the one you already have. To make a new one, you will also need an new AppleID as any AppleID can only have one iCloud account associated with it.
Deleting the account will not delete anything off your device (if prompted for things like contacts, choose to keep them). You will have to sync everything anew with the new account as you cannot move your sync'd content, your old backups or anything else from one iCloud account to another. You will have to set up sync again and let it sync to the new account, and then make new backups to the new account as well.

Had a windows computer with my element 7. Now just bought a Mac OSX version 10.9.2 what would be the best photoshop elements for this machine. I did download elements 12 from Apple store but kept getting incompatible message when trying to open a phot

I thought elements were simple but maybe it is just me. Having problems moving photos from iphoto to elements

Duplicate post; see:
had a windows computer with my element 7. Now just bought a Mac OSX version 10.9.2 what would be the best photoshop elements for this machine. I did download elements 12 from Apple store but kept getting incompatible message when trying to open a phot

Apple loop index is empty folder!!! Can not find loop in logic browser because they just no longer exist on my hard drive, what would be the new appropriate step to take?

Apple loop index folder is empty from the hard drive, which may explain why i can not find loop in my logic pro browser, just sort of grey in disaabled format. what would be the next appropriate steps to take??? I do have an external back up disk.

The IDE interface that the iBook and your desktop use are the same, just a different plug size. So with the rite adapter you could put the iBooks drive in your desktop, you could even boot off it too.
If you want to install the laptops HD in your desktop this will do it for you. Or you can use the iBooks HD as an external hard drive with this

Looking to upgrade my OS from 10.5.8 to something newer, what would be the best option?

I would like to upgrade my operating system, but not sure what would be the best option. I have had the computer for several years and haven't had a problem, I just think it's time to upgrade. Any suggestions?

Which model iMac do you have?
The best option would be the one (OS) that meets your needs of what you want to do AND if you meet ALL the OS system requirements. Suggest that you read the system requirements of the OS you are interested in to make sure you meet all the requirements both hardware & software.

I have a 15' Macbook Pro, mid 2010 running Mavericks. I want to upgrade the hardware by increasing the RAM to 8GB and replacing the HD for a SDD one. What would be the best way to install mavericks on the new HD? I have the original OS X CD.

I have a 15' Macbook Pro, mid 2010 running Mavericks. I want to upgrade the hardware by increasing the RAM to 8GB and replacing the HD for a SDD one. What would be the best way to install mavericks on the new HD? I have the original OS X CD.
From what I read, I have 2 choices: 1. to install OSX and then upgrade to Mavericks, but I'm not sure if this would be possible (to upgrade directly from OSX to Mavericks); and 2. to use a software called Super Duper.
I wouldn't like to have to use a third party software to do this, so the question is: is there a better way to install directly the Mavericks not having to use a third party software?

Install the new drive in the computer.
Install the old drive in an external USB or Firewire enclosure.
Boot the computer from the Recovery HD on the external drive.
Use Disk Utility to partition and format the new internal drive.
Clone your external drive to the internal drive.
How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the Recovery HD on the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the Recovery HD then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your new hard drive (this is the entry with the
      mfgr.'s ID and size) from the left side list. Note the SMART status of
      the drive in DU's status area. If it does not say "Verified" then the drive
      is failing or has failed and will need replacing. Otherwise, click on the
      Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from
      the drop down menu to one. Set the format type to Mac OS Extended
      (Journaled.) Click on the Options button, set the partition scheme to
      GUID then click on the OK button. Click on the Partition button and
      wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the
      drive entry) from the left side list. Click on the Erase tab in the DU main
      window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the
      Options button, check the button for Zero Data and click on OK to
      return to the Erase window.
6. Click on the Erase button. The format process can take up to several
      hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
1. Using Disk Utility still opened.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the
      Destination entry field.
6. Select the source volume from the left side list and drag it to the
      Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive. Source means the old external drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer.

Does Adobe Reader for iOS have the ability to open inbedded links to additional PDF docs? If not, then what would be the best way to use these already created PDF's?

Does Adobe Reader for iOS have the ability to open inbedded links created with Acrobat Standard to additional PDF docs? If not, then what would be the best way to use these already created PDF's on an I Pad?

driddy61,
As of June 2014, none of the Adobe Reader mobile products support the hyperlink action for opening a separate PDF document.
Adobe Reader for iOS
Adobe Reader for Android
Adobe Reader Touch for Windows 8
In addition, the Reader mobile products do not open multiple windows/documents simultaneously, which would make the navigation between PDF documents nearly impossible. (Once a hyperlink takes you to a different PDF document, you have no way to go back to the original PDF document.)
The only Adobe Reader product that fulfills your department's requirements is Adobe Reader XI (mostly for Windows/Mac desktop/laptop computers). Acrobat Pro and Standard are paid products.
Because you are in search of a less expensive device for your department, you could get a Windows tablet instead of a Windows desktop/laptop computer. Microsoft Surface Pro (that you've mentioned in your previous reply) is just one example. You can also find other less expensive Windows tablets.
Tablets
However, please keep in mind that there are two different types of Windows tablets running two different operating systems.
(a) A Windows tablet with an Intel-based processor running Windows 8.1 Pro
Example: Surface Pro 3
You can install and run traditional desktop apps (e.g. Adobe Reader XI) and new Windows Store apps ("Modern" or "Metro-style" apps).
(b) A Windows tablet with an ARM-based processor running Windows RT 8.1
Example: Surface 2
You can only install and run Windows Store apps (e.g. Adobe Reader Touch) but not traditional desktop apps like Adobe Reader XI.
In general, type (b) tablets are more affordable than type (a) tablets. However, if you want to run Adobe Reader XI, you do need to check the technical specification of each tablet and make sure the following conditions are met.
Processor: Intel
Operating system: Windows 8/8.1 or Windows 8/8.1 Pro, not RT
Hope this helps you choose the right device for your department. Please let us know if you have any questions about system requirements or supported features in the Adobe Reader products.

HT3231 how do i TRANSFER MY PHOTOS AND VIDEOS FROM MY MAC PRO POWERBOOK G4 TO MY NEW MACBOOK PRO, WHAT WOULD BE THE BEST WAY, THANKS

I HAVE A MAC POWERBOOK G4 AND WOULD LIKE TO TRANSFER MY FILES, PHOTOS AND VIDS TO MY NEW MAC PRO, WHAT WOULD BE THE BEST METHOD?? THANKS ROB

I think the easiest way is to use a firewire cable (you will need on like this: http://www.google.com/products/catalog?q=Firewire+400+to+800+cable&oe=utf-8&rls= org.mozilla:en-US:official&client=firefox-a&um=1&ie=UTF-8&tbm=shop&cid=120962573 04625337030&sa=X&ei=PytQT9r4NtOBsgL9s_C6Dg&ved=0CHYQ8gIwAA).
Power up the Power Mac G4 and hold the "T" key while it is booting (this puts the G4 notebook in Firewire Target Disk mode). Connect the G4 notebook to the newer MacBook Pro and use the Migration assistant (/Applications/Utilities) OR browse through the files and copy what you want.

With SO MUCH photo editing software available, what would be the best for me if I am a digital camera newby? I do not need Photoshop CC! I do not want to spend $700 bucks! My camera is a Nikon D90. Please help.

With SO MUCH photo editing software available, what would be the best for me if I am a digital camera newby? I do not need Photoshop CC! I do not want to spend $700 bucks! My camera is a Nikon D90. Please help.

Where did you come up with the $700 figure?
Photography plan - $9.99/month or $119/year - Creative Cloud Photography plan : Adobe Creative Cloud
Single App - $19.99/month
Complete plan - $49.99/month or $599/yr - Creative Cloud free trial & plans : Adobe Creative Cloud
Ah - If you wish to cancel early yeah $74.99 which would total for the year at $899.88. But that final total would be if you canceled in the 12th month but if you plan on keeping it that long might as well go for the annual contract. Then cancel at the end of the term limit if you need to.
If you are not sure what to get, Either Elements as was suggested by Peru Bob or the photography plan.

What would be the reason for sql server agent [MSSQLSERVER] service terminated unexpectedly?

What would be the reason for sql server agent [MSSQLSERVER] service terminated unexpectedly?
only below details found in error log
07:26:44.170 spid60
FILESTREAM: effective level = 3, configured level = 3, file system access share name = 'MSSQLSERVER'.
07:26:45.720 spid51
Configuration option 'Agent XPs' changed from 0 to 1. Run the RECONFIGURE statement to install.
07:26:45.730 spid51
FILESTREAM: effective level = 3, configured level = 3, file system access share name = 'MSSQLSERVER'.
07:28:57.840 spid64
Configuration option 'Agent XPs' changed from 1 to 0. Run the RECONFIGURE statement to install.
07:28:57.840 spid64
FILESTREAM: effective level = 3, configured level = 3, file system access share name = 'MSSQLSERVER'.
and below error on agent log
2014-01-01 07:26:28 - ? [131] SQLSERVERAGENT service stopping due to a stop request from a user, process, or the OS...
2014-01-01 07:26:43 - + [188] Scheduler engine timed out (after 15 seconds) waiting for 1 jobs(s) to stop
2014-01-01 07:26:44 - + [098] SQLServerAgent terminated (forcefully)
Rahul

What would be the reason for sql server agent [MSSQLSERVER] service terminated unexpectedly?
only below details found in error log
07:26:44.170 spid60
FILESTREAM: effective level = 3, configured level = 3, file system access share name = 'MSSQLSERVER'.
07:26:45.720 spid51
Configuration option 'Agent XPs' changed from 0 to 1. Run the RECONFIGURE statement to install.
07:26:45.730 spid51
FILESTREAM: effective level = 3, configured level = 3, file system access share name = 'MSSQLSERVER'.
07:28:57.840 spid64
Configuration option 'Agent XPs' changed from 1 to 0. Run the RECONFIGURE statement to install.
07:28:57.840 spid64
FILESTREAM: effective level = 3, configured level = 3, file system access share name = 'MSSQLSERVER'.
and below error on agent log
2014-01-01 07:26:28 - ? [131] SQLSERVERAGENT service stopping due to a stop request from a user, process, or the OS...
2014-01-01 07:26:43 - + [188] Scheduler engine timed out (after 15 seconds) waiting for 1 jobs(s) to stop
2014-01-01 07:26:44 - + [098] SQLServerAgent terminated (forcefully)
Rahul
Can you post the output of below query
select @@version.
If you are using SQl server express edition ,SQL server agent feature is not available.It seems from errorlog that you can start it but actually you cannot.But first confirm what is version and edition of your SQL server
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

What would be the simplest way to view and take control over the internet?

Hi All:
Can some one tell me what would be the best and simplest way to connect from my laptop to another laptop through the internet?
I have DYNdns running on the second laptop and have a host name assigned to that system for it to update the IP since the system uses different internet connections. The services that I would like to be able to have are the viewing and controlling of the system. I've read some where in this NG that if I have a copy of ARD admin. installed on that system also, it would be one way to do it... can some one verify this and please let me know if there are any specific settings I need to have on either one of the systems.
I can connect to the second laptop while in my home network with no problem and perform all tasks. when trying to connect through the internet.. the system shows offline .
Both systems are identical in hardware an software, Intel 2.16, 2G's RAM, OS X ver 10.5.2 all up to date and ARD 3.2
Yes, I'm new to ARD and yes I'm searching the NG and the net. but I figure it doesn't hurt to ask since time is limited.
All help greatly appreciated ..
TIA
Oscar A.

To be able to connect to a workstation from outside it's network, the ports that ARD uses must be open on both ends of the connection. ARD uses ports 3283 and 5900 so those must be open.
If your workstations get their addresses from an NAT device rather than being "real", the ports also need to be forwarded in the router to the workstation's internal IP address. ARD uses port 3283 for the reporting and updating function, so if your Macs are getting their IP addresses through NAT, since you can only forward a port to a single workstation, you can only get reports, push package/files to etc. for a single workstation.
ARD uses the VNC protocol for observation and control, though, and there are a range of IP addresses for that protocol, starting with 5900. ARD uses 5900 by default, so that port would be forwarded to the first workstation. You would, I believe, need to install VNC servers on the systems (since the ARD client cannot listen on any port other than 5900 while VNC servers can be set for other ports such as 5901, 5902, etc. You would then forward 5901 to the second workstation (and on to 5902, 5903, etc.). You can then use the following information:
Remote Desktop 2: How to specify a port number for a VNC client
to connect.
The only other options are: 1) to run the ARD administrator on a workstation on the network, and then take control of that system from outside, either via VNC or another copy of ARD, or 2) set up a virtual private network (VPN) so that when you connect from outside, your admin system is officially part of the local network.
Hope this helps.

What would be the best way to install Arch, if I have Broadcom wifi?

I can boot into an Arch USB disk, but I can't connect to the Internet, since my laptop doesn't have ethernet and the wifi card is Broadcom, which requires the `broadcom-wl` package. What would be the easiest way of proceeding with this install? On IRC, I was advised to either: (1) boot into another distro, connect to the Internet there, then chroot into the Arch USB image, and download the additional packages from there, or (2) download the `broadcom-wl` package from the AUR, and a build environment, transfer these files to the USB system, and then compile and install the module there. Both of these solutions seems rather complicated to me. With (1), I was having difficulty mounting the arch .img as a drive using Ubuntu, since Ubuntu's `mount` command needs a filetype, and didn't seem to like any of the filetypes I tried. With (2), I have a feeling this would be fairly complicated--I'm not sure which binaries I can install for my system, or how to install packages that I downloaded offline.

I was having difficulty mounting the arch .img as a drive using Ubuntu, since Ubuntu's `mount` command needs a filetype
Not sure what you mean?
I too had issues with my internet, eventually I installed arch from Ubuntu. I used bootstrap image and it worked as advertized in the wiki.
EDIT: If you using Ubuntu then don't forget to create '/run/shm' otherwise pacstrap will fail.
Last edited by fantab (2014-10-29 04:17:46)

What would be the correct workflow to go from XDCAM to Apple Prores?

Similar Messages

Maybe you are looking for