What would be the steps needed to upgrade OIM, connector pack
we are planning to upgrade OIM 9.0.3 to 9.1 . So what are the steps that need to be followed?
I also wanted to know how take backup of connector pack ??? Also the steps to upgrade connector pack???
Version Corrected
we are planning to upgrade OIM 9.0.3 to 9.1 . So what are the steps that need to be followed?
I also wanted to know how take backup of connector pack ??? Also the steps to upgrade connector pack???
Similar Messages
-
I want to delete my icloud-account from my iphone 5 and then register again, because I want to change my email-address/account name. What would be the steps to follow? How do I make sure I do not lose any information stored on/in my iphone 5?
You would have to delete the existing iCloud account and create a wholly new one - you cannot change the @icloud.com email address of the one you already have. To make a new one, you will also need an new AppleID as any AppleID can only have one iCloud account associated with it.
Deleting the account will not delete anything off your device (if prompted for things like contacts, choose to keep them). You will have to sync everything anew with the new account as you cannot move your sync'd content, your old backups or anything else from one iCloud account to another. You will have to set up sync again and let it sync to the new account, and then make new backups to the new account as well. -
I need to update my Mac OS. Currently it's using os 10.5.8 version what would be the next version I need to install? Thank you for all your help.
You need to buy a Mac OS X 10.6 DVD, install it, and run the 10.6.8 combo updater. Mac OS X 10.6 requires a Mac with an Intel CPU and at least 1GB of RAM.
(94922) -
I have a 15' Macbook Pro, mid 2010 running Mavericks. I want to upgrade the hardware by increasing the RAM to 8GB and replacing the HD for a SDD one. What would be the best way to install mavericks on the new HD? I have the original OS X CD.
From what I read, I have 2 choices: 1. to install OSX and then upgrade to Mavericks, but I'm not sure if this would be possible (to upgrade directly from OSX to Mavericks); and 2. to use a software called Super Duper.
I wouldn't like to have to use a third party software to do this, so the question is: is there a better way to install directly the Mavericks not having to use a third party software?Install the new drive in the computer.
Install the old drive in an external USB or Firewire enclosure.
Boot the computer from the Recovery HD on the external drive.
Use Disk Utility to partition and format the new internal drive.
Clone your external drive to the internal drive.
How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the Recovery HD on the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the Recovery HD then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your new hard drive (this is the entry with the
mfgr.'s ID and size) from the left side list. Note the SMART status of
the drive in DU's status area. If it does not say "Verified" then the drive
is failing or has failed and will need replacing. Otherwise, click on the
Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from
the drop down menu to one. Set the format type to Mac OS Extended
(Journaled.) Click on the Options button, set the partition scheme to
GUID then click on the OK button. Click on the Partition button and
wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the
drive entry) from the left side list. Click on the Erase tab in the DU main
window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the
Options button, check the button for Zero Data and click on OK to
return to the Erase window.
6. Click on the Erase button. The format process can take up to several
hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
1. Using Disk Utility still opened.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the
Destination entry field.
6. Select the source volume from the left side list and drag it to the
Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive. Source means the old external drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer. -
What are the steps needs to be perform to define a data model
What are the steps needs to be perform to define a data model
a. Information Gathering
b. Hardware & Software
c. Structure the Information MDM
d. Transfer into a Physical Model BW data model
e. Explore use of existing model Business ContentHi Siva,
Very first activity is Proof of concept (POC), here we have to show How BW works for clients Reporting requirement during POC we as BW consultants need to creat some sample BW back end objects and also some reports based on business requirement. This is very crucial stage as Client Judge wethere BW would meet his demands. If every thing is fine then next step is Bidding.
After Bidding the contract then actual Project intiates. from here we follow ASAP methodology.
<u><b>
Project Preparation</b></u>
Here Senior Consultant would go to Client place for Business Process Transistion and to know in what way the Architectue should be set up so here Basis People will come into picture.
<u><b>Blue Print</b></u>
Transistion could be understood by BRD (Business Requirement Documents) BRD states what is exact requirement and it is given by End users.
By seeeing thr BRD's we as BW consultants must prepare APPlication Design Documents . The Application Design Documents states all the Technical aspects that needs to be performed as BW backend and also as well as Frontend.
<u><b>Realization Phase</b></u>
Here as BW consultants we must start confuguring as mentioned in ADD's by taking care of all performance aspects, once all the configuration are done we do Unit testing. unit testing is an activity where we check all the design process wether it running correct or not. After unit testing we move the design objects to Qulaity for Integration Testing.
<u><b>Testing</b></u>
Here end user will check all the objects, reports on end to end basis. after integration testing is done then UAT ( User acceptance Testing) would come into picture where user check each process and sign off.
<u><b>Go live</b></u>
Here all the object will be moved to Production where end users and power users can start working on the system. intially for some days Development team would be taking care of all support activites there after it will be transitoned to support team.
Hope It helps you.
Assign Points if it usefull
Regards
Sujan -
Looking to upgrade my OS from 10.5.8 to something newer, what would be the best option?
I would like to upgrade my operating system, but not sure what would be the best option. I have had the computer for several years and haven't had a problem, I just think it's time to upgrade. Any suggestions?
Which model iMac do you have?
The best option would be the one (OS) that meets your needs of what you want to do AND if you meet ALL the OS system requirements. Suggest that you read the system requirements of the OS you are interested in to make sure you meet all the requirements both hardware & software. -
Hi, I have bought macbook pro a year back and it has 4 GB RAM and its mid 2012 model can u tell me whether if i give the macbook for upgradation of memory will they do it and what would be the cost.
You need to take your MacBook Pro to your Apple store genius bar and check that they will do the upgrade for you...price for 4 GB memory used to be $200 but you will have to check with them for the current cost.
You can also check with OWC, http://www.macsales.com and see what their cost is and decide if you want to do it yourself. Cost will be about half of that at the Apple store. -
I have a desktop MAC OSX Leopard. I want to upgrade to Quicken 2007, install Snow Leopard, download iLife'11. I heard that Quicken and Snow Leopard can clash..........that is why I am upgrading Quicken. What would be the best order of installing these products. I have gotten defferent opinions and I want to be sure I install them correctly.
Thank You.First, install OS X, then install your third-party software.
How to Install OS X Updates Successfully
A. Repair the Hard Drive and Permissions:
Boot from your current OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
B. Make a Bootable Backup Using Restore Option of Disk Utility:
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the
Destination entry field.
6. Select the source volume from the left side list and drag it to the
Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal
startup drive.
C. Important: Please read before installing:
1. If you have a FireWire hard drive connected, disconnect it before installing the
update unless you will boot from this drive and install the update on it.
Reconnect it and turn it back on after installation is complete and you've
restarted.
2. You may experience unexpected results if you have installed third-party system
software modifications, or if you have modified the operating system through
other means. (This does not apply to normal application software installation.)
3. The installation process should not be interrupted. If a power outage or other
interruption occurs during installation, use the standalone installer (see below)
from Apple Downloads to update. While the installation is in progress do not use
the computer.
D. To upgrade:
Purchase the Snow Leopard Retail DVD.
Boot From The OS X Installer Disc:
1. Insert OS X Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple
logo appears.
5. Wait for installer to finish loading.
6. Follow instructions.
After installing Snow Leopard you should update it by downloading and installing Mac OS X 10.6.8 Update Combo v1.1. -
Apple loop index folder is empty from the hard drive, which may explain why i can not find loop in my logic pro browser, just sort of grey in disaabled format. what would be the next appropriate steps to take??? I do have an external back up disk.
The IDE interface that the iBook and your desktop use are the same, just a different plug size. So with the rite adapter you could put the iBooks drive in your desktop, you could even boot off it too.
If you want to install the laptops HD in your desktop this will do it for you. Or you can use the iBooks HD as an external hard drive with this -
What are the steps need to be taken care for MM data sources while extrac
what are the steps need to be taken care for MM data sources while extracting from R/3 tables
and please provide the Steps involved in R/3 side
thnaks
RachaHi,
For Inventory Management, you can have a look at the following link.
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328] -
Hello All,
What are the steps needed to make the field in the DFF Additional Information for Agent only take numbers, commas & hyphens?
Navigation
Bob Sales manager<Ebiz form<service request tab<SR type<DFF<additional information for agents <cheque number
The field Cheque number Character allowed (, -) in the DFF Additional Information for Agent should only take numbers
Thanks & Regards
AyeshaThanks Sridar
If we use Number we cannot separate the cheque numbers with , or -
We need to enter numbers along with comma and '_' in cheque number field.
Thanks & Regards
Ayesha -
With SO MUCH photo editing software available, what would be the best for me if I am a digital camera newby? I do not need Photoshop CC! I do not want to spend $700 bucks! My camera is a Nikon D90. Please help.
Where did you come up with the $700 figure?
Photography plan - $9.99/month or $119/year - Creative Cloud Photography plan : Adobe Creative Cloud
Single App - $19.99/month
Complete plan - $49.99/month or $599/yr - Creative Cloud free trial & plans : Adobe Creative Cloud
Ah - If you wish to cancel early yeah $74.99 which would total for the year at $899.88. But that final total would be if you canceled in the 12th month but if you plan on keeping it that long might as well go for the annual contract. Then cancel at the end of the term limit if you need to.
If you are not sure what to get, Either Elements as was suggested by Peru Bob or the photography plan. -
How can I upgrade from Photoshop Elements 12 to Photoshop Elements 13 AND Photoshop Premiere Elements 13? What would be the price?
Hi Raymond,
I would advise you to buy the bundle package of Premiere and Photoshop Elements 13 which cost 149 $ but due to online promotions the price right now is 119 $.
Thank you for posting on Adobe Forums. -
I have I pad 2, and I recently reset my password. And now I am not able to upgrade my old apps. Usually it will not ask apple password, but now it's asking password and when I type the password ir says the password is wrong. What would be the problem?
If the old ID is yours, and if your current ID was created by editing the details of this old ID (rather than being an entirely new ID), go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iDevice, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.
-
I am a dinosaur still using Photoshop 6. Am forced to upgrade - what would be the current replacement.
But you are not forced to upgrade unless you choose to upgrade your computer or operating system. At that point it would probably stop working, otherwise it should go on forever. And a jolly good piece of software it was (and is).
Maybe you are looking for
-
Can anyone help. I have just upgraded the kids ipads to iOS 7..and imessages have stopped working. So I google search and find that I now have to have apple ID's for both kids. I goto My Apple ID and try creating an account for my son born 2004. I ge
-
Changing the name of time machine
Okay this is a preemptive, I have an external with three partitions, 1 is for bulk files that won't fit on my Laptop, 1 is for a backup of my PS3, 1 is for my Time Machine. I was wondering if I could change the name of my Time Machine drive as the on
-
Special characters an issue in reading email from server?
I have an email application that uses javamail 1.4.1 that grabs emails out of flat files and displays the messages on the screen. Until recently, all email was sent within the business, but now they are able to receive emails from any email provider.
-
Hi I am very new to exchange , I want to configure autodiscover feature. This is SBS 2008 with Exchange 2007 SP1, I know that there was upgrade performed, but I don't know if it was successful. When I use this cmdlet Test-OutlookWebServices -ClientAc
-
On my very first device (laptop) application manager will not let me sign in to any CC app saying I have exceeded the maximum number of 2 devices. This is not true. For me it was 1. Laptop, 2. Desktop. The apps worked for a week or so before I had th