What would cause 16ghz iphone 4 to reboot at random times?

what would cause my 16ghz iphone 4 to randomly reboot without warning? it also fails to save pictures some of the time.

I am having this same exact problem with my iPhone 4. It plays "9 to 5 - Dolly Parton" (funny I know) at random times. Sometimes at start up, when using camera, when plugging in charger or car charger, or for just no reason at all. I am still in the first 30 days of owning the phone so I will be taking it to AT&T tomorrow.

Similar Messages

  • What would cause my iphone 5 (9months old) screen  to bow out by the volume buttons? - never been dropped

    I purchased my iPhone new in November. Recently it has been shutting itself off at random times. Registering that it needed to be charged although it had 50 -80% left on the battery. It was pointed out that the screen is bowing out by the volume buttons. After doing some research online it looks like an expanding battery. Has any one else ran into this problem?  What would cause this?

    hi,
    i would go to the genius bar, thats definitely not a common problem with the iphone.
    but lithium accus are known for such problems (e.g. model flight), they can expand when there is something not working well.
    peter

  • What would cause my Iphone 4 to freeze up when it gets cold?

    Whenever my iphone 4 is in an enviroment that is below 50* F it goes unresponsive. Any ideas that would cause that?

    Thats still within the 32-95*F operating range. Just try a hard reset and see if it still freezes. Hold both power and home buttons until the apple logo appears (ignore the power off slider).

  • What would cause my iphone 4  to not connect to internet in 3G

    It just has started this problem

    Have you tried resetting your network settings? settings > general > reset > reset network settings

  • Iphone 3gs keeps rebooting at random times during phone call

    Hi
    Will ios5 fix this issue? Been happening since I downloaded ios4?

    (-1)  it basically is the iphone "iphone" canot be restored due to an unknown error (-1)

  • What would cause the microphone in the iPhone 3Gs to stop working?

    What would cause the microphone in the iphone 3Gs to stop working?

    Basic troubleshooting steps are restart, reset, restore.  If these are tried and you still have problems then you have a hardware failure and will need to have your phone replaced by Apple.

  • What would cause iphone to not turn on?

    Recently my iphone 5 started freezing up when left charging overnight. I must hold home and power button for ten seconds to wake up. What would cause this?

    Standard troubleshooting...
    Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider if, it comes up. Takes about 5-15 secs of button holding and you won't lose any data or settings.
    Remove all apps from Recently Used list...
    - From any Home Screen, double tap the home button to bring up the Recents List
    - Tap and hold any icon in this list until they wiggle
    - Press the red (-) to delete all apps from this list.
    - Press the home button twice when done.
    If still a problem restore with your backup.
    If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
    If still a problem, it's likely a hardware issue.

  • My I phone 4 will boot me out of a web site and there are time when it just shuts down on its own,also it take forever to load my game. What would cause these issues?

    My I phone 4 will take forever to load a game, boot me out of a web site and sometimes shut down on its own. What would cause these issues

    Hello Jake69529,
    The following article details some useful troulbeshooting that can help get your iPhone's apps stabilized.
    iOS: An app you installed unexpectedly quits, stops responding, or won’t open
    http://support.apple.com/kb/TS1702
    Cheers,
    Allen

  • What would cause the original I Pad shut itself off while playing games or online? it is not a battery issue or time issue. When I turn it back on it goes to were I was  when I was online ,but have to start games over.

    What would cause the original I Pad shut itself off while playing games or online? it is not a battery issue or time issue. When I turn it back on it goes to were I was  when I was online ,but have to start games over.

    The original iPad has a slow processor and only 256 MB of memory so it often runs into low-memory failures.
    Double click the home button and dismiss all of the recents - I do that weekly.
    Then reboot by holding both the power and home buttons until the apple logo appears, ignore the red slider - I also do that weekly.
    Both seem to help to reduce the low-memory faults that occur.

  • When trying to send a photo via email, I am prompted to setup an email account even though email is already setup.  What would cause this?

    when trying to send a photo via email, I am prompted to setup an email account even though email is already setup.  What would cause this?  Better yet, how do I fix it?

    I have checked this on my device.  I see a Default account under Messages created outside of Mail will be sent from the default account.  There is an account selected, though it does not show my exchnage account.  If it is only an exchange accout, can that not be used for this?

  • DPS: pinch and zoom function not working on all pages within folio (v30 tools using the pdf setting). What would cause some pages to pinch and zoom fluidly, while other pages appear a bit sticky? Could it be a button on the wrong layer?

    What would cause some pages in the same folio to pinch and zoom fluidly, while other pages appear a bit sticky? Could it be a button on the wrong layer that's not allowing the pinch and zoom to work?
    I do have a "go to state" button that enlarges graphic to full page on the page. Could this be cancelling the pinch and zoom functionality? Would a box with text wrap ON affect the ability to pich and zoom? What else may be causing this?

    What would cause some pages in the same folio to pinch and zoom fluidly, while other pages appear a bit sticky? Could it be a button on the wrong layer that's not allowing the pinch and zoom to work?
    I do have a "go to state" button that enlarges graphic to full page on the page. Could this be cancelling the pinch and zoom functionality? Would a box with text wrap ON affect the ability to pich and zoom? What else may be causing this?

  • I print 2 pages to pdf and file size is 600k, I print 1 additonal page and file size goes to 6M, what would cause this (graphics are same on all pages)

    I print 2 pages to pdf and file size is 600k, I print 1 additonal page and file size goes to 6M, what would cause this (graphics are same on all pages).
    I know the colour graphic shading in the document that causes the issue of larger file size, but it doesn't make sense that printing 1 additional page with same information as first 2 pages would cause this.

    I print 2 pages to pdf and file size is 600k, I print 1 additonal page and file size goes to 6M, what would cause this (graphics are same on all pages).
    I know the colour graphic shading in the document that causes the issue of larger file size, but it doesn't make sense that printing 1 additional page with same information as first 2 pages would cause this.

  • What would cause my Game Center app to stop working ?

    What would cause my Game Center app to stop working & other apps to just shut off .

    I've attached a stripped down version of the subVI which handles the UDP connection.
    In the Init and Disconnect cases, I've had to remove the startup and shutdown commands as that's protected info, but they are just fixed U8 arrays.  The subVI does not have any incoming errors when executed by itself or as part of the main VI nor does the Init case generate any errors.  Also, the UDP Open and UDP Write functions process a nonzero Connection ID.
    Let's see, what else?  The Init and Disconnect cases operates just once at the beginning and end, as you might expect.  While the Read case operating at 1x/sec during normal operation.
    Let me know if there's any more insight I can provide.
    Attachments:
    UDP_Connection Manager.vi ‏17 KB

  • What would cause a few things to reset?

    I noticed tonight that my ring tone was changed and vibrate was turned back on in the ring setting. I didn't do it. What would cause that??

    Reinstalled OS, seems to be fine now.

  • What would cause adobe connect to freeze in a session for users, while the moderator session did not

    what would cause adobe connect to freeze in a session for users, while the moderator session did not

    HI rogerstam1
    Is screen being shared at that time when addin freezes?
    if yes if this coems again could you just stop screen share and try it again.
    hope this helps.

Maybe you are looking for

  • Where do I find *the* mapviewer bean

    I have been reading this forum and I see people talk about "the" mapviewer bean, I would like to use this bean in my forms, but I can't seem to find it. Should I write my own Bean around the MapViewer class?

  • Is it Safe to Upgrade my nvidia-based X?

    A few months ago I upgraded my nvidia driver and then I had to downgrade to 173xx. There is a short thread here http://bbs.archlinux.org/viewtopic.php?id=74625 about that experience. When I ran sudo pacman -Syu now I got this: :: Starting full system

  • What is the auto sort criteria in SPRY?

    After looking at my recordset and my XML it became aparent that spry is autosorting my initial loaded data. What is the basis of this softing?

  • Grab from an instance within split join

    Hi All I have a process, and every now and then a user from role 'G' wants to grab the instances of a process (that may exist in any activity) to one of his activities, say 'AAG' (Activity After Grab :)). The Grab activities properties are defined so

  • Cannot connect using URLConnection and JSSE

    Hi, I am using the following code: System.setProperty("java.protocol.handler.pkgs", "com.sun.net.ssl.internal.www.protocol"); Security.addProvider(new com.sun.net.ssl.internal.ssl.Provider()); I also pass -Djava.protocol.handler.pkgs=com.sun.net.ssl.