What would cause a few things to reset?

I noticed tonight that my ring tone was changed and vibrate was turned back on in the ring setting. I didn't do it. What would cause that??

Reinstalled OS, seems to be fine now.

Similar Messages

  • What would cause my cd player to not play audio?

    what would cause my cd player to not play audio? when cd inserted into the computer it pauses for a few seconds &then ejects cd.

    theredness wrote:
    what would cause my cd player to not play audio?
    Your CD player? Or the CD drive in your MacBook Pro?
    Assuming the latter, several things. Begin with
    Intel-based Macs: Resetting the System Management Controller (SMC)
    <http://support.apple.com/kb/HT3964>

  • What would cause this battery problem?

    There is a macbook air I am considering buying if the price is right and it is said to have this problem "The internal battery says that it is charging but when the AC power adapter is unplugged the unit shuts down and will not power back on until the AC power adapter is plugged back in." Any idea what would cause this to happen? Thanks!

    Hi Ty,
    It could be a couple of different things, the first assumption is that it's the battery. If you go to System Profiler and go under the power menu selection does it recognize the battery? What are the statistics on that battery?
    It's also possible that the cable which connects the battery to the logic board is the point of failure. Due to the way that the MBA is manufacturer you'll be unable to proceed with "troubleshooting" this and the machine will require service.
    You can however, try resetting the SMC and see if that changes anything.
    http://support.apple.com/kb/HT1411

  • Apple Support says my serial number is invalid. What would cause this and how could I fix it. And yes, I am certain I provided the correct serial number.

    Apple Support says that my serial number is invalid. I provided the correct number. What would cause this and how can it be fixed. Ipad II.

    Things that could cause it:
    you bought a fake
    you allowed an unauthorized person to "repair" the iPad, replaced the logic board

  • What would cause itunes to say "music file has been moved or is missing" when no files were moved?

    What would cause iTunes to say: "The song “All Prayed Out” could not be used because the original file could not be found. Would you like to locate it?" when the music library has not been moved or modified?  This is the case for many, but not all the songs in my library.

    But I can't... find... it... It's not there.
    Unless you're talking about the entire Mozilla Firefox folder (which isn't what the thing you copied says,) there is no installation folder.

  • What would cause Safari to stop running Adobe Flashplayer?

    What would cause Safari to stop running Adobe Flashplayer? It's on my computer. It works with other browsers. Most websites don't complain. When I ask them to show me stuff, however,  it comes out looking like a math problem written in Turkish or Romanian.
    What about pdf files? Same thing.

    From the Safari menu bar, select
    Safari ▹ Preferences ▹ Security
    and check the box marked Allow other plug-ins.

  • What would cause the microphone in the iPhone 3Gs to stop working?

    What would cause the microphone in the iphone 3Gs to stop working?

    Basic troubleshooting steps are restart, reset, restore.  If these are tried and you still have problems then you have a hardware failure and will need to have your phone replaced by Apple.

  • Hi i have an ipad 2 and i have made a password but have forgotten it and it has disabled it.what would be the best thing to do?

    hi i have an ipad 2 and i have made a password but have forgotten it and it has disabled it.what would be the best thing to do?

    Recovery Mode
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: Data will be lost. You may have to repeat the above many times.

  • What would cause iphone to not turn on?

    Recently my iphone 5 started freezing up when left charging overnight. I must hold home and power button for ten seconds to wake up. What would cause this?

    Standard troubleshooting...
    Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider if, it comes up. Takes about 5-15 secs of button holding and you won't lose any data or settings.
    Remove all apps from Recently Used list...
    - From any Home Screen, double tap the home button to bring up the Recents List
    - Tap and hold any icon in this list until they wiggle
    - Press the red (-) to delete all apps from this list.
    - Press the home button twice when done.
    If still a problem restore with your backup.
    If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
    If still a problem, it's likely a hardware issue.

  • What would cause I Pad 2 to simply not respond?Checked cords, cords work on I Phone

    What would cause I Pad 2 to 'die'? Checked cords all work on other devices.

    Hello, loisfromclayton!
    The following articles may help get your iPad back up and running. I'll post the relevant parts here, as well.
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    If iPad won't turn on, or the display stops responding
    Follow these steps, testing after each:
    Reset iPad. Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears.
    If iPad still won't respond after you restore it
    Follow these steps, testing after each:
    If you receive an alert in iTunes while restoring your iPad, refer to this article for instructions on how to resolve common issues with updating and restoring.
    If you cannot restore your iPad in iTunes, or if iTunes does not recognize the device, refer to this article for instructions on restoring using recovery mode.
    For information on how to restore your iPad, see the following:
    iTunes: Restoring iOS software
    http://support.apple.com/kb/ht1414
    Best regards,
    Allen

  • When trying to send a photo via email, I am prompted to setup an email account even though email is already setup.  What would cause this?

    when trying to send a photo via email, I am prompted to setup an email account even though email is already setup.  What would cause this?  Better yet, how do I fix it?

    I have checked this on my device.  I see a Default account under Messages created outside of Mail will be sent from the default account.  There is an account selected, though it does not show my exchnage account.  If it is only an exchange accout, can that not be used for this?

  • DPS: pinch and zoom function not working on all pages within folio (v30 tools using the pdf setting). What would cause some pages to pinch and zoom fluidly, while other pages appear a bit sticky? Could it be a button on the wrong layer?

    What would cause some pages in the same folio to pinch and zoom fluidly, while other pages appear a bit sticky? Could it be a button on the wrong layer that's not allowing the pinch and zoom to work?
    I do have a "go to state" button that enlarges graphic to full page on the page. Could this be cancelling the pinch and zoom functionality? Would a box with text wrap ON affect the ability to pich and zoom? What else may be causing this?

    What would cause some pages in the same folio to pinch and zoom fluidly, while other pages appear a bit sticky? Could it be a button on the wrong layer that's not allowing the pinch and zoom to work?
    I do have a "go to state" button that enlarges graphic to full page on the page. Could this be cancelling the pinch and zoom functionality? Would a box with text wrap ON affect the ability to pich and zoom? What else may be causing this?

  • I print 2 pages to pdf and file size is 600k, I print 1 additonal page and file size goes to 6M, what would cause this (graphics are same on all pages)

    I print 2 pages to pdf and file size is 600k, I print 1 additonal page and file size goes to 6M, what would cause this (graphics are same on all pages).
    I know the colour graphic shading in the document that causes the issue of larger file size, but it doesn't make sense that printing 1 additional page with same information as first 2 pages would cause this.

    I print 2 pages to pdf and file size is 600k, I print 1 additonal page and file size goes to 6M, what would cause this (graphics are same on all pages).
    I know the colour graphic shading in the document that causes the issue of larger file size, but it doesn't make sense that printing 1 additional page with same information as first 2 pages would cause this.

  • What would cause my Game Center app to stop working ?

    What would cause my Game Center app to stop working &amp; other apps to just shut off .

    I've attached a stripped down version of the subVI which handles the UDP connection.
    In the Init and Disconnect cases, I've had to remove the startup and shutdown commands as that's protected info, but they are just fixed U8 arrays.  The subVI does not have any incoming errors when executed by itself or as part of the main VI nor does the Init case generate any errors.  Also, the UDP Open and UDP Write functions process a nonzero Connection ID.
    Let's see, what else?  The Init and Disconnect cases operates just once at the beginning and end, as you might expect.  While the Read case operating at 1x/sec during normal operation.
    Let me know if there's any more insight I can provide.
    Attachments:
    UDP_Connection Manager.vi ‏17 KB

  • What would cause adobe connect to freeze in a session for users, while the moderator session did not

    what would cause adobe connect to freeze in a session for users, while the moderator session did not

    HI rogerstam1
    Is screen being shared at that time when addin freezes?
    if yes if this coems again could you just stop screen share and try it again.
    hope this helps.

Maybe you are looking for