What would cause both Thunderbird & Firefox keep going out of focus from a few seconds to a minute?

Not happening in any other browsers or programs. Just Thunderbird and Firefox. Can hardly stand to handle my email in Thunderbird anymore. It's like the visuals are shifting and get too blurry to read. Lasts from a few seconds to a minute or more.

See my answer here https://support.mozilla.org/en-US/questions/1012145

Similar Messages

  • What would cause my video to keep freezing?

    Greetings, all ye of greater knowledge in areas like this.
    Recently, I have had a strange problem with my video freezing. If I'm viewing the video on my timeline, it will ocassionally freeze, but my audio will keep playing. I can stop the timeline and hit play again and it unfreezes the video, but it still freezes at random while my audio seems to play without a problem.
    Where this is becoming a nuisance is that my video is freezing in the same way when I try to print to tape. The audio will continue, but it will get stuck on a frame somewhere and will stay on it through the rest of the video while it's printing to the tape. Additionally, when I try to capture footage from my camera, I can get about 15 seconds into a clip and then it will either drop frames or freeze on my while the audio keeps going.
    Does anyone know what may be causing this? It almost seems like there is a lag somewhere in my system, but I can't figure out where. This literally just seemed to pop up one day and it's like my computer has been running slower. i'm not sure if this is a FCP problem or a system problem, but I think it may have started with FCP.

    eee! So many posts.
    I currently have 2 harddrives hooked up. One has about 37.56 Gigs left on it (probably just over 3/4 full) and the other is nearly full. My files are saved onto it. I am editing in DV format and everything is rendered.
    I have a drive allocated as the scratch disk.
    I don't believe the drive is going to sleep. I would think it would effect my audio as well, since they are both located on the same drive.
    For what it's worth, I ended up ejecting the drive I was using as I needed to do some other work and my system seemed to speed back up. I reopened Final Cut with and it's like my system isn't bogged down anymore. I may try capturing to tape using a different drive and see if maybe it was the drive itself that was bogging down my system.

  • TV keeps cutting out for anywhere from 2 - 20 seconds

    My TV service cuts out arbitrarily (screen goes blank) for anywhere from 2 to 20 seconds. Tends to happen more often and more frequently in the evenings.  It is occurring both on my HD-DVR box as well as my standard STB.  All the boxes are Motorola.  Any ideas.  This started about 6 weeks ago and is getting really annoying. 

    that is usually an HDMI issue, so that is either coming from the TV, the Cable itself or the Box. 
    you can try resetting the box first, and see if it goes away.   
    Menu > Customer Support > in home agent > reboot STB. 
    If that doesn't work, you can try power cycling your TV,  just unplug the TV for a few minutes, and then plug the TV back in,   see if it goes away. re 
    And you can try reseating the cable (oddly this works)   just unplug the cable at both ends, plug em back in.   Or try switching the port on the back of your tv (the set top box only has one HDMI your TV may have several to plug into)  
    And you can try changing the cable itself.     
    If all that doesn't work, then then call into customer service and see if they have any tricks up their sleeves,  they sometimes have special reset commands that are a little stronger than simply resetting the box.   they may have to replace it if all else fails.  
    if you plug in a different cable like Component it will probably go away, and you will preserve the High Definition Picture quality.

  • What would cause logo colors to change when creating a PDF from an InDesign file?

    Hi,
    My graphic designer has a publication laid out in InDesign. When he creates a PDF file of the book to send to the printer, the colors of our logo on the cover change. Dramatically. The really weird thing is that everything still looks normal on his computer, which is off-site. But when he sends the file to me or the printer, it has the wrong colors. We're all at a loss as to why this is happening. Any ideas?
    Also, I'm just an editor and my experience with InDesign is pretty much limited to making text changes so I'm not well-versed in the lingo. If you could dumb down any advice you may have, it would be greatly appreciated!
    Thanks!
    Shawna

    Shawna, there really isn't realistic hope that anyone could troubleshoot the problem from here with the information you've given. If I was answering your graphic designer, I'd be interrogating him/her about the methods employed all along the way from the logo as a stand-alone file to it's placement in InDesign to the InDesign transparency blend space, possible effects or blend modes applied, and the wide range of possibilities surrounding the methods and settings used in the export/conversion to PDF.

  • What would cause the original I Pad shut itself off while playing games or online? it is not a battery issue or time issue. When I turn it back on it goes to were I was  when I was online ,but have to start games over.

    What would cause the original I Pad shut itself off while playing games or online? it is not a battery issue or time issue. When I turn it back on it goes to were I was  when I was online ,but have to start games over.

    The original iPad has a slow processor and only 256 MB of memory so it often runs into low-memory failures.
    Double click the home button and dismiss all of the recents - I do that weekly.
    Then reboot by holding both the power and home buttons until the apple logo appears, ignore the red slider - I also do that weekly.
    Both seem to help to reduce the low-memory faults that occur.

  • I print 2 pages to pdf and file size is 600k, I print 1 additonal page and file size goes to 6M, what would cause this (graphics are same on all pages)

    I print 2 pages to pdf and file size is 600k, I print 1 additonal page and file size goes to 6M, what would cause this (graphics are same on all pages).
    I know the colour graphic shading in the document that causes the issue of larger file size, but it doesn't make sense that printing 1 additional page with same information as first 2 pages would cause this.

    I print 2 pages to pdf and file size is 600k, I print 1 additonal page and file size goes to 6M, what would cause this (graphics are same on all pages).
    I know the colour graphic shading in the document that causes the issue of larger file size, but it doesn't make sense that printing 1 additional page with same information as first 2 pages would cause this.

  • What would cause my printer to only print about 3/4 of a 4x6 photo on a C4795?

    What would cause my printer to only print about 3/4 of a 4x6 photo on a C4795?

    eee! So many posts.
    I currently have 2 harddrives hooked up. One has about 37.56 Gigs left on it (probably just over 3/4 full) and the other is nearly full. My files are saved onto it. I am editing in DV format and everything is rendered.
    I have a drive allocated as the scratch disk.
    I don't believe the drive is going to sleep. I would think it would effect my audio as well, since they are both located on the same drive.
    For what it's worth, I ended up ejecting the drive I was using as I needed to do some other work and my system seemed to speed back up. I reopened Final Cut with and it's like my system isn't bogged down anymore. I may try capturing to tape using a different drive and see if maybe it was the drive itself that was bogging down my system.

  • What would cause the printer to only print text in microsoft word but no images

    i have a  hp deskjet D1320 printer, windows xp operating system, and i have always printed greeting cards from microsoft word by inserting an image and then printing it with the printer set to duplex(2sided)printing option, so after you print the image you flip the card around and then print the text on the inside of the card. now the printer does not print any images when i insert the image and then click print it just runs 1 piece of paper through the printer and stops but it will still print text just fine, does anyone know what would cause this type of an issue?
                                                                  thank-you,
                                                                                     hwnugent

    Hi there hwnugent,
    Try downloading and running the print and scan doctor located here:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
    It can fix a lot on its own and if not give a better idea of what is going on. Let us know the results.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • What would cause itunes to say "music file has been moved or is missing" when no files were moved?

    What would cause iTunes to say: "The song “All Prayed Out” could not be used because the original file could not be found. Would you like to locate it?" when the music library has not been moved or modified?  This is the case for many, but not all the songs in my library.

    But I can't... find... it... It's not there.
    Unless you're talking about the entire Mozilla Firefox folder (which isn't what the thing you copied says,) there is no installation folder.

  • Im on iOS 8.0.2 and it just keeps going out of cellular service, what can i do?

    Im on iOS 8.0.2 and it just keeps going out of cellular service, what can i do?

    Hello there cubandope,
    If I understand correctly, your iPhone cellular data is dropping periodically, but you can still make calls. I would use the troubleshooting in the following article to help resolve the issue here:
    If you see No Service in the status bar of your iPhone or iPad
    Follow these steps, testing after each.
    Tap Settings > Enable Airplane Mode, wait five seconds, then turn off airplane mode.
    Restart your device.
    Remove the SIM card. If the SIM card is damaged, worn, or bent, or if it's too big or small for the SIM tray, contact your carrier for a new one. Then reinsert the SIM card.
    Check for a carrier-settings update: Connect to a Wi-Fi network, tap Settings > General > About, and install any available carrier-settings updates. If you can't connect to Wi-Fi, connect your device to a computer that has iTunes.
    Update your iPhone to the latest version of iOS.
    Reset network settings by tapping Settings > General > Reset > Reset Network Settings. This will reset all network settings, including Bluetooth pairing records, Wi-Fi passwords, VPN, and APN settings.
    Contact your carrier to check for any network or account issues.
    Restore your iPhone.
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • I just purchased the 4S and am having trouble with it at least once a day says Invalid Sim, what would cause this and how do I fix it

    I just purchased the I 4S and at least once a day, it will say Invalid Sim, what would cause this and how do I fix it?

    Then, if there's any data on the drive that you want to keep, you have to back up before you do anything else -- assuming it's still possible.
    Basically you have three options:
    1. Install a copy of the Mac OS on an external hard drive, boot from it, and copy the data from the internal drive.
    2. Start the problem Mac in FireWire target mode (command-T at startup) and connect it to a working Mac with a FireWire cable. The internal drive will mount as a FireWire device.
    3. Remove the internal drive and mount in an external enclosure on another Mac.
    Once you've backed up, follow the sequence in the support article linked below. The article is somewhat outdated. Where it refers to booting from an installation disc, you should boot from your recovery partition (if running Lion) by holding down the key combination command-R at the chime.
    Mac OS X: Gray screen appears during startup

  • When trying to send a photo via email, I am prompted to setup an email account even though email is already setup.  What would cause this?

    when trying to send a photo via email, I am prompted to setup an email account even though email is already setup.  What would cause this?  Better yet, how do I fix it?

    I have checked this on my device.  I see a Default account under Messages created outside of Mail will be sent from the default account.  There is an account selected, though it does not show my exchnage account.  If it is only an exchange accout, can that not be used for this?

  • DPS: pinch and zoom function not working on all pages within folio (v30 tools using the pdf setting). What would cause some pages to pinch and zoom fluidly, while other pages appear a bit sticky? Could it be a button on the wrong layer?

    What would cause some pages in the same folio to pinch and zoom fluidly, while other pages appear a bit sticky? Could it be a button on the wrong layer that's not allowing the pinch and zoom to work?
    I do have a "go to state" button that enlarges graphic to full page on the page. Could this be cancelling the pinch and zoom functionality? Would a box with text wrap ON affect the ability to pich and zoom? What else may be causing this?

    What would cause some pages in the same folio to pinch and zoom fluidly, while other pages appear a bit sticky? Could it be a button on the wrong layer that's not allowing the pinch and zoom to work?
    I do have a "go to state" button that enlarges graphic to full page on the page. Could this be cancelling the pinch and zoom functionality? Would a box with text wrap ON affect the ability to pich and zoom? What else may be causing this?

  • What would cause my Game Center app to stop working ?

    What would cause my Game Center app to stop working & other apps to just shut off .

    I've attached a stripped down version of the subVI which handles the UDP connection.
    In the Init and Disconnect cases, I've had to remove the startup and shutdown commands as that's protected info, but they are just fixed U8 arrays.  The subVI does not have any incoming errors when executed by itself or as part of the main VI nor does the Init case generate any errors.  Also, the UDP Open and UDP Write functions process a nonzero Connection ID.
    Let's see, what else?  The Init and Disconnect cases operates just once at the beginning and end, as you might expect.  While the Read case operating at 1x/sec during normal operation.
    Let me know if there's any more insight I can provide.
    Attachments:
    UDP_Connection Manager.vi ‏17 KB

  • What would cause a few things to reset?

    I noticed tonight that my ring tone was changed and vibrate was turned back on in the ring setting. I didn't do it. What would cause that??

    Reinstalled OS, seems to be fine now.

Maybe you are looking for