What would cause iphone to not turn on?

Recently my iphone 5 started freezing up when left charging overnight. I must hold home and power button for ten seconds to wake up. What would cause this?

Standard troubleshooting...
Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider if, it comes up. Takes about 5-15 secs of button holding and you won't lose any data or settings.
Remove all apps from Recently Used list...
- From any Home Screen, double tap the home button to bring up the Recents List
- Tap and hold any icon in this list until they wiggle
- Press the red (-) to delete all apps from this list.
- Press the home button twice when done.
If still a problem restore with your backup.
If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
If still a problem, it's likely a hardware issue.

Similar Messages

  • What would cause the flash not to fire?

    What would cause 580ex not to fire?

    Can you be more specific?
    When you power it on, you should get a red Pilot light when it's ready to fire.  If you press the light (it's a button) it should test-fire the flash.  That will confirm the flash actually works.
    You can tell the camera to disable the flash... this is useful when you just want to use the flash's focus-assist beam to help the camera lock focus, but do not actually want the flash to fire.  Check your camera menu... probably under "External Speedlite Control" -> "Flash Firing" and check that it is set to "Enable".
    Tim Campbell
    5D II, 5D III, 60Da

  • What would cause my keyboard not to respond on a laptop connected to a monitor?

    What would be the cause to my keyboard not responding when I start my computer. I am on a MacBook that is connected to a monitor and initially the keyboard does not respond. Periodicall when switching from the laptop USB, which I did for functionality, to the monitor USB, it solves the issue. But the issue recurs on a daily basis. Anyone have an idea? I am thinking it's a configuration issue but I am not an expert. The monitor was swapped out thinking it was the USB ports but it is occurring on the substituted monitor as well.

    Hey robofife,
    This article has some instructions for you regarding the use of an external keyboard in closed clamshell mode on your computer:
    Mac notebooks: How to use your computer in closed clamshell (display closed) mode with an external display
    http://support.apple.com/kb/ht3131
    If you are using a wired keyboard and mouse:
    Make sure the computer is plugged in to an outlet using the AC power adapter.
    Connect a USB keyboard and mouse to your computer.
    With the computer turned on connect the Mac notebook (using the appropriate Apple adapter if necessary) to the appropriate port on the external display or projector and turn the display or projector on.
    After your computer's Desktop appears on the external display, close the computer's lid.
    When you close the lid:
    In OS X Lion and later, the external display will change to a blue screen, then will show your desktop.
    In Mac OS X v10.6.8 and earlier, wake the computer up by clicking the mouse button or by pressing a key on your external keyboard.
    You should now be able to use your Mac notebook as you normally would, with a USB keyboard and mouse.
    Thanks for coming to the Apple Support Communities!
    Regards,
    Braden

  • What would cause variable header not to refresh?

    I've looked over all the details.  Can't figure it out.
    I'm attaching screen shots so you can see I've defined and inserted everything properly.
    The header responds to the Part One written in the correct paragraph style and it responds to Part Two, ditto, but Part Three, which is exactly the same and One and Two doesn't "take."   I've applied my master to ALL PAGES

    Willi, it's not just the language problem, it's the "my inexperience" problem that makes it hard for me to understand you.
    I'm VERY inexperienced. I'm just trying to create a good looking PDF to send to Amazon, and unfortunately I have a deadline for this, so I'm working fast and for too many hours and not efficiently.
    The margins/border problem is not a problem for me since test pdfs look just fine.
    It may be creating problems with the flow of the text though that I'm not aware of.
    However, At this point, setting up a new layout is out of the question.  I've already done that three times.  I must get this to a proof-reader by Feb. 7
    Just tell me one thing -- if you can, VERY SIMPLY.  How do I link the PART THREE to the story so that it will show up in the variable header?
    Otherewise, I'll just have to create a new master to apply to part three with a fixed header instead of a variable.

  • What would cause the original I Pad shut itself off while playing games or online? it is not a battery issue or time issue. When I turn it back on it goes to were I was  when I was online ,but have to start games over.

    What would cause the original I Pad shut itself off while playing games or online? it is not a battery issue or time issue. When I turn it back on it goes to were I was  when I was online ,but have to start games over.

    The original iPad has a slow processor and only 256 MB of memory so it often runs into low-memory failures.
    Double click the home button and dismiss all of the recents - I do that weekly.
    Then reboot by holding both the power and home buttons until the apple logo appears, ignore the red slider - I also do that weekly.
    Both seem to help to reduce the low-memory faults that occur.

  • What would cause my iphone 5 (9months old) screen  to bow out by the volume buttons? - never been dropped

    I purchased my iPhone new in November. Recently it has been shutting itself off at random times. Registering that it needed to be charged although it had 50 -80% left on the battery. It was pointed out that the screen is bowing out by the volume buttons. After doing some research online it looks like an expanding battery. Has any one else ran into this problem?  What would cause this?

    hi,
    i would go to the genius bar, thats definitely not a common problem with the iphone.
    but lithium accus are known for such problems (e.g. model flight), they can expand when there is something not working well.
    peter

  • My Computer freezes and the screen turns white. What would cause this?

    My mac miniComputer freezes and the screen turns white. What would cause this?

    Here is what was in the utilities for my console.
    10/22/13 9:41:59.000 AM kernel[0]: CoreStorage: fsck_cs has finished for group "3FD474FF-B711-4557-9B01-67EB19C49BDA" with status 0x00
    10/22/13 9:41:59.000 AM kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/APPLE HDD HTS541010A9E662 Media/IOGUIDPartitionScheme/Macintosh HD@2/CoreStoragePhysical/CoreStorageGroup/Macintosh HD
    10/22/13 9:41:59.000 AM kernel[0]: BSD root: disk1, major 1, minor 4
    10/22/13 9:41:59.000 AM kernel[0]: jnl: unknown-dev: replay_journal: from: 65415680 to: 68414464 (joffset 0x13218000)
    10/22/13 9:41:59.000 AM kernel[0]: IOThunderboltSwitch<0xffffff80159d4a00>(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 0
    10/22/13 9:41:59.000 AM kernel[0]: IOThunderboltSwitch<0xffffff80159d4a00>(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 12 unplug = 0
    10/22/13 9:41:59.000 AM kernel[0]: USBMSC Identifier (non-unique): 10000E000C7F9033 0x59f 0x621 0x0, 2
    10/22/13 9:41:59.000 AM kernel[0]: jnl: unknown-dev: journal replay done.
    10/22/13 9:41:59.000 AM kernel[0]: Kernel is LP64
    10/22/13 9:41:59.000 AM kernel[0]: hfs: Removed 6 orphaned / unlinked files and 475 directories
    10/22/13 9:41:59.000 AM kernel[0]: BCM5701Enet: Ethernet address a8:20:66:0d:fc:25
    10/22/13 9:41:59.000 AM kernel[0]: AirPort_Brcm4331: Ethernet address 20:c9:d0:97:55:7f
    10/22/13 9:41:59.000 AM kernel[0]: IO80211Controller::dataLinkLayerAttachComplete():  adding AppleEFINVRAM notification
    10/22/13 9:41:59.000 AM kernel[0]: IO80211Interface::efiNVRAMPublished(): 
    10/22/13 9:42:06.456 AM com.apple.kextd[12]: not watching F3408C38-5457-3475-AD1D-D360F815C3AD -> no volume lock to grant
    10/22/13 9:42:06.547 AM fseventsd[59]: event logs in /.fseventsd out of sync with volume.  destroying old logs. (86493 21 86554)
    10/22/13 9:42:06.584 AM hidd[58]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
    10/22/13 9:42:06.586 AM hidd[58]: void __IOHIDLoadBundles(): Loaded 0 HID plugins
    10/22/13 9:42:06.590 AM kdc[56]: label: default
    10/22/13 9:42:06.590 AM kdc[56]:     dbname: od:/Local/Default
    10/22/13 9:42:06.590 AM kdc[56]:     mkey_file: /var/db/krb5kdc/m-key
    10/22/13 9:42:06.590 AM kdc[56]:     acl_file: /var/db/krb5kdc/kadmind.acl
    10/22/13 9:42:06.598 AM airportd[74]: _processDLILEvent: en1 attached (down)
    10/22/13 9:42:06.640 AM coreservicesd[76]: FindBestLSSession(), no match for inSessionID 0xfffffffffffffffc auditTokenInfo( uid=0 euid=0 auSessionID=100000 create=false
    10/22/13 9:42:06.682 AM mDNSResponder[50]: mDNSResponder mDNSResponder-379.38.1 (Apr 25 2013 19:19:56) starting OSXVers 12
    10/22/13 9:42:06.000 AM kernel[0]: Previous Shutdown Cause: 3
    10/22/13 9:42:06.000 AM kernel[0]: [IOBluetoothHCIController][start] -- completed
    10/22/13 9:42:06.000 AM kernel[0]: IOBluetoothUSBDFU::probe
    10/22/13 9:42:06.000 AM kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x828A FirmwareVersion - 0x0066
    10/22/13 9:42:06.000 AM kernel[0]: **** [BroadcomBluetoothHostControllerUSBTransport][start] -- Completed -- this = 0xffffff80168d6c00 ****
    10/22/13 9:42:06.000 AM kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification -- controller = 0xffffff80168d6c00
    10/22/13 9:42:06.000 AM kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    10/22/13 9:42:06.000 AM kernel[0]: DSMOS has arrived
    10/22/13 9:42:06.000 AM kernel[0]: IOPPF: AppleIntelCPUPowerManagement mode
    10/22/13 9:42:06.000 AM kernel[0]: createVirtIf(): ifRole = 1
    10/22/13 9:42:06.000 AM kernel[0]: in func createVirtualInterface ifRole = 1
    10/22/13 9:42:06.000 AM kernel[0]: AirPort_Brcm4331_P2PInterface::init name <p2p0> role 1 this 0xffffff801682f000
    10/22/13 9:42:06.000 AM kernel[0]: AirPort_Brcm4331_P2PInterface::init() <p2p> role 1
    10/22/13 9:42:06.000 AM kernel[0]: Created virtif 0xffffff801682f000 p2p0
    10/22/13 9:42:06.000 AM kernel[0]: m_tail has not been written to hardware: m_tail = 0x00000000, hardare tail register = 0x00001d08
    10/22/13 9:42:07.714 AM configd[18]: setting hostname to "kathy-winters-mac-mini-3.local"
    10/22/13 9:42:07.000 AM kernel[0]: AirPort: Link Down on en1. Reason 1 (Unspecified).
    10/22/13 9:42:07.000 AM kernel[0]: en1::IO80211Interface::postMessage bssid changed
    10/22/13 9:42:07.717 AM configd[18]: network changed.
    10/22/13 9:42:08.210 AM fseventsd[59]: log dir: /.fseventsd getting new uuid: 5C426A11-1379-4AD6-AFD9-DF4963B9C3CB
    10/22/13 9:42:08.000 AM kernel[0]: macx_swapon SUCCESS
    10/22/13 9:42:09.264 AM mds[49]: (Normal) FMW: FMW 0 0
    10/22/13 9:42:09.446 AM com.apple.SecurityServer[15]: Session 100000 created
    10/22/13 9:42:10.000 AM kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en0, 10-Megabit, Half-duplex, No flow-control, Debug [796d,0101,0de1,0300,0021,0000]
    10/22/13 9:42:14.849 AM appleeventsd[64]: main: Starting up
    10/22/13 9:42:16.255 AM com.apple.usbmuxd[39]: usbmuxd-323 on Jul 29 2013 at 23:21:29, running 64 bit
    10/22/13 9:42:19.119 AM com.apple.SecurityServer[15]: Entering service
    10/22/13 9:42:19.177 AM systemkeychain[79]: done file: /var/run/systemkeychaincheck.done
    10/22/13 9:42:19.185 AM configd[18]: network changed: DNS*
    10/22/13 9:42:19.187 AM mDNSResponder[50]: D2D_IPC: Loaded
    10/22/13 9:42:19.187 AM mDNSResponder[50]: D2DInitialize succeeded
    10/22/13 9:42:19.223 AM FDERecoveryAgent[82]: Waiting for CoreStorage encryption be activated, will try again in 5 seconds
    10/22/13 9:42:19.621 AM netbiosd[83]: Unable to start NetBIOS name service:
    10/22/13 9:42:20.363 AM kdc[56]: WARNING Found KDC certificate (O=System Identity,CN=com.apple.kerberos.kdc)is missing the PK-INIT KDC EKU, this is bad for interoperability.
    10/22/13 9:42:20.629 AM apsd[70]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    10/22/13 9:42:20.629 AM apsd[70]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
    10/22/13 9:42:20.993 AM UserEventAgent[11]: Captive: [HandleNetworkInformationChanged:2435] nwi_state_copy returned NULL
    10/22/13 9:42:21.081 AM digest-service[105]: label: default
    10/22/13 9:42:21.081 AM digest-service[105]:     dbname: od:/Local/Default
    10/22/13 9:42:21.081 AM digest-service[105]:     mkey_file: /var/db/krb5kdc/m-key
    10/22/13 9:42:21.081 AM digest-service[105]:     acl_file: /var/db/krb5kdc/kadmind.acl
    10/22/13 9:42:21.083 AM digest-service[105]: digest-request: uid=0
    10/22/13 9:42:21.104 AM corestoraged[99]: 0x7fff720a4180 unlockLVF: LVF=E089D621-8D4E-44B9-82E5-DBFC72F26660, "AES-XTS", status = "Unlocked"
    10/22/13 9:42:21.106 AM rpcsvchost[109]: sandbox_init: com.apple.msrpc.netlogon.sb succeeded
    10/22/13 9:42:21.109 AM digest-service[105]: digest-request: init request
    10/22/13 9:42:21.113 AM digest-service[105]: digest-request: init return domain: BUILTIN server: KATHY-WINTERS-MAC-MINI-3
    10/22/13 9:42:21.301 AM coreservicesd[76]: FindBestLSSession(), no match for inSessionID 0xfffffffffffffffc auditTokenInfo( uid=0 euid=0 auSessionID=100000 create=false
    10/22/13 9:42:21.305 AM com.apple.kextcache[113]: /: helper partitions appear up to date.
    10/22/13 9:42:21.801 AM awacsd[68]: Starting awacsd connectivity-78.3 (Apr 25 2013 19:22:44)
    10/22/13 9:42:21.804 AM awacsd[68]: InnerStore CopyAllZones: no info in Dynamic Store
    10/22/13 9:42:22.008 AM locationd[54]: NOTICE,Location icon should now be in state 0
    10/22/13 9:42:22.000 AM kernel[0]: en1: 802.11d country code set to 'US'.
    10/22/13 9:42:22.000 AM kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
    10/22/13 9:42:22.000 AM kernel[0]: MacAuthEvent en1   Auth result for: d8:c7:c8:5b:d5:d0  MAC AUTH succeeded
    10/22/13 9:42:22.000 AM kernel[0]: wlEvent: en1 en1 Link UP virtIf = 0
    10/22/13 9:42:22.000 AM kernel[0]: AirPort: Link Up on en1
    10/22/13 9:42:22.000 AM kernel[0]: en1: BSSID changed to d8:c7:c8:5b:d5:d0
    10/22/13 9:42:22.000 AM kernel[0]: en1::IO80211Interface::postMessage bssid changed
    10/22/13 9:42:22.195 AM loginwindow[53]: Login Window Application Started
    10/22/13 9:42:22.244 AM WindowServer[114]: Server is starting up
    10/22/13 9:42:22.247 AM WindowServer[114]: Session 256 retained (2 references)
    10/22/13 9:42:22.247 AM WindowServer[114]: Session 256 released (1 references)
    10/22/13 9:42:22.254 AM WindowServer[114]: Session 256 retained (2 references)
    10/22/13 9:42:22.705 AM WindowServer[114]: init_page_flip: page flip mode is on
    10/22/13 9:42:23.271 AM kdc[56]: KDC started
    10/22/13 9:42:23.578 AM configd[18]: network changed: v4(en1+:173.250.178.195) DNS+ Proxy+ SMB
    10/22/13 9:42:23.581 AM WindowServer[114]: mux_initialize: Couldn't find any matches
    10/22/13 9:42:23.586 AM configd[18]: setting hostname to "d-173-250-178-195.dhcp4.washington.edu"
    10/22/13 9:42:23.589 AM UserEventAgent[11]: CFPreferences: user home directory for user mobile at  is unavailable. User domains will be volatile.
    10/22/13 9:42:23.590 AM UserEventAgent[11]: Captive: en1: Probing 'University of Washington'
    10/22/13 9:42:23.599 AM WindowServer[114]: GLCompositor enabled for tile size [256 x 256]
    10/22/13 9:42:23.599 AM WindowServer[114]: CGXGLInitMipMap: mip map mode is on
    10/22/13 9:42:23.607 AM UserEventAgent[11]: Captive: Online (not captive)
    10/22/13 9:42:23.609 AM configd[18]: network changed: v4(en1!:173.250.178.195) DNS Proxy SMB
    10/22/13 9:42:23.632 AM WindowServer[114]: WSMachineUsesNewStyleMirroring: true
    10/22/13 9:42:23.632 AM WindowServer[114]: MPServiceForDisplayDevice: Invalid device alias (0)
    10/22/13 9:42:23.632 AM WindowServer[114]: Display 0x1c80d8d2: GL mask 0x4; bounds (0, 0)[1920 x 1080], 17 modes available
    Main, Active, on-line, enabled, boot, Vendor 472, Model 235, S/N 23505592, Unit 2, Rotation 0
    UUID 0x00000472000002352350559200000000
    10/22/13 9:42:23.633 AM WindowServer[114]: Display 0x003f003c: GL mask 0x1; bounds (0, 0)[0 x 0], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 0, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003c
    10/22/13 9:42:23.633 AM WindowServer[114]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003d
    10/22/13 9:42:23.637 AM WindowServer[114]: Created shield window 0x5 for display 0x1c80d8d2
    10/22/13 9:42:23.637 AM WindowServer[114]: Created shield window 0x6 for display 0x003f003c
    10/22/13 9:42:23.637 AM WindowServer[114]: Created shield window 0x7 for display 0x003f003d
    10/22/13 9:42:23.638 AM WindowServer[114]: Display 0x1c80d8d2: GL mask 0x4; bounds (0, 0)[1920 x 1080], 17 modes available
    Main, Active, on-line, enabled, boot, Vendor 472, Model 235, S/N 23505592, Unit 2, Rotation 0
    UUID 0x00000472000002352350559200000000
    10/22/13 9:42:23.638 AM WindowServer[114]: Display 0x003f003c: GL mask 0x1; bounds (2944, 0)[1 x 1], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 0, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003c
    10/22/13 9:42:23.638 AM WindowServer[114]: Display 0x003f003d: GL mask 0x2; bounds (2945, 0)[1 x 1], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003d
    10/22/13 9:42:23.638 AM WindowServer[114]: CGXPerformInitialDisplayConfiguration
    10/22/13 9:42:23.639 AM WindowServer[114]:   Display 0x1c80d8d2: MappedDisplay Unit 2; Vendor 0x472 Model 0x235 S/N 592467346 Dimensions 20.51 x 11.54; online enabled, Bounds (0,0)[1920 x 1080], Rotation 0, Resolution 1
    10/22/13 9:42:23.639 AM WindowServer[114]:   Display 0x003f003c: MappedDisplay Unit 0; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2944,0)[1 x 1], Rotation 0, Resolution 1
    10/22/13 9:42:23.639 AM WindowServer[114]:   Display 0x003f003d: MappedDisplay Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2945,0)[1 x 1], Rotation 0, Resolution 1
    10/22/13 9:42:24.078 AM ntpd[100]: proto: precision = 1.000 usec
    10/22/13 9:42:24.338 AM WindowServer[114]: GLCompositor: GL renderer id 0x01024400, GL mask 0x00000007, accelerator 0x00004193, unit 0, caps QEX|QGL|MIPMAP, vram 1156 MB
    10/22/13 9:42:24.338 AM WindowServer[114]: GLCompositor: GL renderer id 0x01024400, GL mask 0x00000007, texture units 8, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
    10/22/13 9:42:24.342 AM loginwindow[53]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
    10/22/13 9:42:24.628 AM FDERecoveryAgent[82]: Waiting for CoreStorage encryption be activated, will try again in 10 seconds
    10/22/13 9:42:24.873 AM airportd[74]: _doAutoJoin: Already associated to “University of Washington”. Bailing on auto-join.
    10/22/13 9:42:24.882 AM airportd[74]: _doAutoJoin: Already associated to “University of Washington”. Bailing on auto-join.
    10/22/13 9:42:25.125 AM com.apple.launchd[1]: (com.apple.xprotectupdater[36]) Exited with code: 252
    10/22/13 9:42:25.410 AM WindowServer[114]: Created shield window 0x8 for display 0x1c80d8d2
    10/22/13 9:42:25.410 AM WindowServer[114]: Display 0x1c80d8d2: MappedDisplay Unit 2; ColorProfile { 2, "Acer G245HQL"}; TransferFormula (1.000000, 1.000000, 1.000000)
    10/22/13 9:42:25.427 AM launchctl[126]: com.apple.findmymacmessenger: Already loaded
    10/22/13 9:42:25.441 AM com.apple.SecurityServer[15]: Session 100004 created
    10/22/13 9:42:25.472 AM airportd[74]: _doAutoJoin: Already associated to “University of Washington”. Bailing on auto-join.
    10/22/13 9:42:25.542 AM configd[18]: network changed: v4(en0+:128.95.5.135, en1) DNS! Proxy! SMB
    10/22/13 9:42:25.548 AM configd[18]: setting hostname to "d-128-95-5-135.dhcp4.washington.edu"
    10/22/13 9:42:25.567 AM locationd[134]: NOTICE,Location icon should now be in state 0
    10/22/13 9:42:25.573 AM UserEventAgent[127]: cannot find useragent 1102
    10/22/13 9:42:25.600 AM loginwindow[53]: Login Window Started Security Agent
    10/22/13 9:42:25.667 AM SecurityAgent[136]: This is the first run
    10/22/13 9:42:25.667 AM SecurityAgent[136]: MacBuddy was run = 0
    10/22/13 9:42:25.676 AM WindowServer[114]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x1c80d8d2 device: 0x103f34110  isBackBuffered: 1 numComp: 3 numDisp: 3
    10/22/13 9:42:25.869 AM SecurityAgent[136]: User info context values set for kathywinter
    10/22/13 9:42:25.990 AM WindowServer[114]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
    10/22/13 9:42:26.013 AM WindowServer[114]: Display 0x1c80d8d2: MappedDisplay Unit 2; ColorProfile { 2, "Acer G245HQL"}; TransferFormula (1.000000, 1.000000, 1.000000)
    10/22/13 9:42:26.026 AM WindowServer[114]: Display 0x1c80d8d2: MappedDisplay Unit 2; ColorProfile { 2, "Acer G245HQL"}; TransferFormula (1.000000, 1.000000, 1.000000)
    10/22/13 9:42:26.295 AM loginwindow[53]: Login Window - Returned from Security Agent
    10/22/13 9:42:26.298 AM loginwindow[53]: ERROR | ScreensharingLoginNotification | Failed sending message to screen sharing GetScreensharingPort, err: 1102
    10/22/13 9:42:26.308 AM loginwindow[53]: USER_PROCESS: 53 console
    10/22/13 9:42:26.321 AM airportd[74]: _doAutoJoin: Already associated to “University of Washington”. Bailing on auto-join.
    10/22/13 9:42:26.755 AM com.apple.launchd.peruser.501[148]: (com.apple.gamed) Ignored this key: UserName
    10/22/13 9:42:26.755 AM com.apple.launchd.peruser.501[148]: (com.apple.gamed) Ignored this key: GroupName
    10/22/13 9:42:26.756 AM com.apple.launchd.peruser.501[148]: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
    10/22/13 9:42:26.760 AM loginwindow[53]: Connection with distnoted server was invalidated
    10/22/13 9:42:26.765 AM distnoted[154]: # distnote server agent  absolute time: 42.067362814   civil time: Tue Oct 22 09:42:26 2013   pid: 154 uid: 501  root: no
    10/22/13 9:42:27.409 AM UserEventAgent[153]: cannot find fw daemon port 1102
    10/22/13 9:42:27.844 AM com.apple.SecurityServer[15]: Session 100005 created
    10/22/13 9:42:28.028 AM WindowServer[114]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
    10/22/13 9:42:28.048 AM WindowServer[114]: Display 0x1c80d8d2: MappedDisplay Unit 2; ColorProfile { 2, "Acer G245HQL"}; TransferFormula (1.000000, 1.000000, 1.000000)
    10/22/13 9:42:28.168 AM mds[49]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
    10/22/13 9:42:28.169 AM mds[49]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
    10/22/13 9:42:31.327 AM timezoned[183]: bootstrap_look_up failed (44e)
    10/22/13 9:42:31.336 AM timezoned[183]: bootstrap_look_up failed (44e)
    10/22/13 9:42:34.612 AM mds[49]: Unable to talk to lsboxd
    10/22/13 9:42:34.674 AM FDERecoveryAgent[82]: Waiting for CoreStorage encryption be activated, will try again in 20 seconds
    10/22/13 9:42:34.768 AM com.apple.time[153]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
    10/22/13 9:42:37.163 AM awacsd[68]: Exiting
    10/22/13 9:42:38.863 AM com.apple.launchd.peruser.501[148]: (com.apple.AddressBook.abd) Throttling respawn: Will start in 9 seconds
    10/22/13 9:42:42.685 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP1] [value:128.95.120.1]
    10/22/13 9:42:42.685 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP2] [value:128.95.112.1]
    10/22/13 9:42:42.714 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP1] [value:128.95.120.1]
    10/22/13 9:42:42.714 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP2] [value:128.95.112.1]
    10/22/13 9:42:42.733 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP1] [value:128.95.120.1]
    10/22/13 9:42:42.733 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP2] [value:128.95.112.1]
    10/22/13 9:42:42.752 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP1] [value:128.95.120.1]
    10/22/13 9:42:42.752 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP2] [value:128.95.112.1]
    10/22/13 9:42:42.771 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP1] [value:128.95.120.1]
    10/22/13 9:42:42.771 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP2] [value:128.95.112.1]
    10/22/13 9:42:42.789 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP1] [value:128.95.120.1]
    10/22/13 9:42:42.789 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP2] [value:128.95.112.1]
    10/22/13 9:42:42.808 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP1] [value:128.95.120.1]
    10/22/13 9:42:42.808 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP2] [value:128.95.112.1]
    10/22/13 9:42:42.827 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP1] [value:128.95.120.1]
    10/22/13 9:42:42.827 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP2] [value:128.95.112.1]
    10/22/13 9:42:42.845 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP1] [value:128.95.120.1]
    10/22/13 9:42:42.845 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP2] [value:128.95.112.1]
    10/22/13 9:42:42.864 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP1] [value:128.95.120.1]
    10/22/13 9:42:42.864 AM InterCheck[72]: SXLC: Setting [key:SXLDNSIP2] [value:128.95.112.1]
    10/22/13 9:42:43.000 AM kernel[0]: Sophos Anti-Virus on-access kext activated
    10/22/13 9:42:46.750 AM com.apple.launchd[1]: (com.apple.coreservices.appleid.authentication[131]) Exit timeout elapsed (20 seconds). Killing
    10/22/13 9:42:49.603 AM SystemUIServer[175]: CGSCopyWindowShape: pid (175) passed NULL window
    10/22/13 9:42:49.603 AM SystemUIServer[175]: could not update menu bar region, 1000
    10/22/13 9:42:49.603 AM SystemUIServer[175]: CGSSetWindowTransformAtPlacement: Singular matrix [0.000 0.000 0.000 0.000]
    10/22/13 9:42:49.817 AM coreaudiod[197]: Enabled automatic stack shots because audio IO is inactive
    10/22/13 9:42:53.000 AM kernel[0]: jnl: disk2s6: flushing fs disk buffer returned 0x5
    10/22/13 9:42:54.715 AM FDERecoveryAgent[82]: Waiting for CoreStorage encryption be activated, will try again in 40 seconds

  • What would cause I Pad 2 to simply not respond?Checked cords, cords work on I Phone

    What would cause I Pad 2 to 'die'? Checked cords all work on other devices.

    Hello, loisfromclayton!
    The following articles may help get your iPad back up and running. I'll post the relevant parts here, as well.
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    If iPad won't turn on, or the display stops responding
    Follow these steps, testing after each:
    Reset iPad. Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears.
    If iPad still won't respond after you restore it
    Follow these steps, testing after each:
    If you receive an alert in iTunes while restoring your iPad, refer to this article for instructions on how to resolve common issues with updating and restoring.
    If you cannot restore your iPad in iTunes, or if iTunes does not recognize the device, refer to this article for instructions on restoring using recovery mode.
    For information on how to restore your iPad, see the following:
    iTunes: Restoring iOS software
    http://support.apple.com/kb/ht1414
    Best regards,
    Allen

  • DPS: pinch and zoom function not working on all pages within folio (v30 tools using the pdf setting). What would cause some pages to pinch and zoom fluidly, while other pages appear a bit sticky? Could it be a button on the wrong layer?

    What would cause some pages in the same folio to pinch and zoom fluidly, while other pages appear a bit sticky? Could it be a button on the wrong layer that's not allowing the pinch and zoom to work?
    I do have a "go to state" button that enlarges graphic to full page on the page. Could this be cancelling the pinch and zoom functionality? Would a box with text wrap ON affect the ability to pich and zoom? What else may be causing this?

    What would cause some pages in the same folio to pinch and zoom fluidly, while other pages appear a bit sticky? Could it be a button on the wrong layer that's not allowing the pinch and zoom to work?
    I do have a "go to state" button that enlarges graphic to full page on the page. Could this be cancelling the pinch and zoom functionality? Would a box with text wrap ON affect the ability to pich and zoom? What else may be causing this?

  • I do  not see a Photo streaming icon when I open iCloud.  What would cause that?

    I do  not see a Photo streaming icon when I open iCloud.  What would cause that?

    The cloud icon means you've already downloaded those Apps in the past and they are in your purchased history.
    For payed apps this would allow you to redownload them without having to pay again.
    Just tap on the cloud icon to start the download.

  • HT201210 Wont turn on just flashes apple sign, for an ipad 2 what would cause this to happen When I tried to restore started to flash the dead battery sign

    Wont turn on just flashes apple sign, for an ipad 2 what would cause this to happen When I tried to restore started to flash the dead battery sign

    Hello Tommythecat_nz,
    I would check to ensure that the device is fully charged if you got the dead battery indicator. Let it charge for some time.
    -Derrick Lambert

  • WHat would cause this error: File not found

    Hi,
    When I want to preview my page in the browser, I get a 'Not
    Found' message: The requested URL /navius2006nl/www/cases.asp was
    not found on this server.
    What would cause that to happen. The browser displays pure
    thml pages just fine.
    Thanks for any help you might be able to offer.
    Rogier
    Rotterdam, The Netherlands

    Are you using frames? Do you have a webserver installed? Have
    you defined
    your testing server?
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "RogierBos" <[email protected]> wrote in
    message
    news:f5e866$jnm$[email protected]..
    > Hi,
    > When I want to preview my page in the browser, I get a
    'Not Found'
    > message:
    > The requested URL /navius2006nl/www/cases.asp was not
    found on this
    > server.
    >
    > What would cause that to happen. The browser displays
    pure thml pages just
    > fine.
    >
    > Thanks for any help you might be able to offer.
    >
    > Rogier
    > Rotterdam, The Netherlands
    >
    >

  • What would cause the microphone in the iPhone 3Gs to stop working?

    What would cause the microphone in the iphone 3Gs to stop working?

    Basic troubleshooting steps are restart, reset, restore.  If these are tried and you still have problems then you have a hardware failure and will need to have your phone replaced by Apple.

  • My iphone is not turning on, I do not know what to do. Sometimes when I put it on the charger it will flash and show the apple (like its going to turn on) then it will go black then do it again

    My iphone is not turning on, I do not know what to do. Sometimes when I put it on the charger it will flash and show the apple (like its going to turn on) then it will go black and  then it will do it again. Is there anything Apple can do?

    Hello Katia_Jazmin,
    The article linked below provides some useful troubleshooting steps that can help get your iPhone to power on.
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Cheers,
    Allen

  • My iPhone will not turn on, the screen is completely black. It will vibrate while plugged into a charger, but that is it. I have no idea what to do.

    I have no idea what to do please help me!

    Source: http://support.apple.com/kb/ts2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen. Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Locate a Service location: https://locate.apple.com (choose your country in the top right)
    Call Apple for Mail-in Service (if available): http://support.apple.com/kb/he57
    Set up service on your own or check options: https://selfsolve.apple.com
    Questions about service and potential costs: http://www.apple.com/support/service/ (Choose your country after selecting your product)

Maybe you are looking for