What would cause keynote 5.1 to stop playing slides? It reverts back to production mode.

My version of keynote on my MacBook has begun acting strange. If I say a presentation as a powerpoint it will open it and play it. If I open one saved as a keynote it will not play. It will revert back to production mode. I have a major presentation due on Monday Oct 14. I'd like to do it from my old MacBook which has served me well for many years. My other option is to save it as a powerpoint and play it on one of the agency pc laptops.

If I open one saved as a keynote it will not play. It will revert back to production mode.
Keynote will only play a presentation full screen if it has been set to do so, have you made this setting?:
Inspector > Document > Document > Automatically Play on Opening

Similar Messages

  • What would cause my cd player to not play audio?

    what would cause my cd player to not play audio? when cd inserted into the computer it pauses for a few seconds &then ejects cd.

    theredness wrote:
    what would cause my cd player to not play audio?
    Your CD player? Or the CD drive in your MacBook Pro?
    Assuming the latter, several things. Begin with
    Intel-based Macs: Resetting the System Management Controller (SMC)
    <http://support.apple.com/kb/HT3964>

  • What would cause my corded mouse to stop working?

    Mid 2010 Mac Pro running OSX 10.6.8.  Was checking e-mail this a.m. and suddenly lost all mouse connection.  Tried different USB ports, and different corded mouse as well as wireless mouse.  Any thoughts as to the cause?  FYI I checked the mouse on a PC at home and it works fine.  Thanks!

    At 4 years the PRAM battery starts dying, causing all sorts of peripherals to start to misbehave.

  • What would cause my Game Center app to stop working ?

    What would cause my Game Center app to stop working &amp; other apps to just shut off .

    I've attached a stripped down version of the subVI which handles the UDP connection.
    In the Init and Disconnect cases, I've had to remove the startup and shutdown commands as that's protected info, but they are just fixed U8 arrays.  The subVI does not have any incoming errors when executed by itself or as part of the main VI nor does the Init case generate any errors.  Also, the UDP Open and UDP Write functions process a nonzero Connection ID.
    Let's see, what else?  The Init and Disconnect cases operates just once at the beginning and end, as you might expect.  While the Read case operating at 1x/sec during normal operation.
    Let me know if there's any more insight I can provide.
    Attachments:
    UDP_Connection Manager.vi ‏17 KB

  • What would cause Safari to stop running Adobe Flashplayer?

    What would cause Safari to stop running Adobe Flashplayer? It's on my computer. It works with other browsers. Most websites don't complain. When I ask them to show me stuff, however,  it comes out looking like a math problem written in Turkish or Romanian.
    What about pdf files? Same thing.

    From the Safari menu bar, select
    Safari ▹ Preferences ▹ Security
    and check the box marked Allow other plug-ins.

  • What would cause the microphone in the iPhone 3Gs to stop working?

    What would cause the microphone in the iphone 3Gs to stop working?

    Basic troubleshooting steps are restart, reset, restore.  If these are tried and you still have problems then you have a hardware failure and will need to have your phone replaced by Apple.

  • What would cause adobe connect to freeze in a session for users, while the moderator session did not

    what would cause adobe connect to freeze in a session for users, while the moderator session did not

    HI rogerstam1
    Is screen being shared at that time when addin freezes?
    if yes if this coems again could you just stop screen share and try it again.
    hope this helps.

  • What would cause the printer to only print text in microsoft word but no images

    i have a  hp deskjet D1320 printer, windows xp operating system, and i have always printed greeting cards from microsoft word by inserting an image and then printing it with the printer set to duplex(2sided)printing option, so after you print the image you flip the card around and then print the text on the inside of the card. now the printer does not print any images when i insert the image and then click print it just runs 1 piece of paper through the printer and stops but it will still print text just fine, does anyone know what would cause this type of an issue?
                                                                  thank-you,
                                                                                     hwnugent

    Hi there hwnugent,
    Try downloading and running the print and scan doctor located here:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
    It can fix a lot on its own and if not give a better idea of what is going on. Let us know the results.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • My I phone 4 will boot me out of a web site and there are time when it just shuts down on its own,also it take forever to load my game. What would cause these issues?

    My I phone 4 will take forever to load a game, boot me out of a web site and sometimes shut down on its own. What would cause these issues

    Hello Jake69529,
    The following article details some useful troulbeshooting that can help get your iPhone's apps stabilized.
    iOS: An app you installed unexpectedly quits, stops responding, or won’t open
    http://support.apple.com/kb/TS1702
    Cheers,
    Allen

  • What would cause I Pad 2 to simply not respond?Checked cords, cords work on I Phone

    What would cause I Pad 2 to 'die'? Checked cords all work on other devices.

    Hello, loisfromclayton!
    The following articles may help get your iPad back up and running. I'll post the relevant parts here, as well.
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    If iPad won't turn on, or the display stops responding
    Follow these steps, testing after each:
    Reset iPad. Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears.
    If iPad still won't respond after you restore it
    Follow these steps, testing after each:
    If you receive an alert in iTunes while restoring your iPad, refer to this article for instructions on how to resolve common issues with updating and restoring.
    If you cannot restore your iPad in iTunes, or if iTunes does not recognize the device, refer to this article for instructions on restoring using recovery mode.
    For information on how to restore your iPad, see the following:
    iTunes: Restoring iOS software
    http://support.apple.com/kb/ht1414
    Best regards,
    Allen

  • When trying to send a photo via email, I am prompted to setup an email account even though email is already setup.  What would cause this?

    when trying to send a photo via email, I am prompted to setup an email account even though email is already setup.  What would cause this?  Better yet, how do I fix it?

    I have checked this on my device.  I see a Default account under Messages created outside of Mail will be sent from the default account.  There is an account selected, though it does not show my exchnage account.  If it is only an exchange accout, can that not be used for this?

  • DPS: pinch and zoom function not working on all pages within folio (v30 tools using the pdf setting). What would cause some pages to pinch and zoom fluidly, while other pages appear a bit sticky? Could it be a button on the wrong layer?

    What would cause some pages in the same folio to pinch and zoom fluidly, while other pages appear a bit sticky? Could it be a button on the wrong layer that's not allowing the pinch and zoom to work?
    I do have a "go to state" button that enlarges graphic to full page on the page. Could this be cancelling the pinch and zoom functionality? Would a box with text wrap ON affect the ability to pich and zoom? What else may be causing this?

    What would cause some pages in the same folio to pinch and zoom fluidly, while other pages appear a bit sticky? Could it be a button on the wrong layer that's not allowing the pinch and zoom to work?
    I do have a "go to state" button that enlarges graphic to full page on the page. Could this be cancelling the pinch and zoom functionality? Would a box with text wrap ON affect the ability to pich and zoom? What else may be causing this?

  • I print 2 pages to pdf and file size is 600k, I print 1 additonal page and file size goes to 6M, what would cause this (graphics are same on all pages)

    I print 2 pages to pdf and file size is 600k, I print 1 additonal page and file size goes to 6M, what would cause this (graphics are same on all pages).
    I know the colour graphic shading in the document that causes the issue of larger file size, but it doesn't make sense that printing 1 additional page with same information as first 2 pages would cause this.

    I print 2 pages to pdf and file size is 600k, I print 1 additonal page and file size goes to 6M, what would cause this (graphics are same on all pages).
    I know the colour graphic shading in the document that causes the issue of larger file size, but it doesn't make sense that printing 1 additional page with same information as first 2 pages would cause this.

  • What would cause a few things to reset?

    I noticed tonight that my ring tone was changed and vibrate was turned back on in the ring setting. I didn't do it. What would cause that??

    Reinstalled OS, seems to be fine now.

  • What would cause this battery problem?

    There is a macbook air I am considering buying if the price is right and it is said to have this problem "The internal battery says that it is charging but when the AC power adapter is unplugged the unit shuts down and will not power back on until the AC power adapter is plugged back in." Any idea what would cause this to happen? Thanks!

    Hi Ty,
    It could be a couple of different things, the first assumption is that it's the battery. If you go to System Profiler and go under the power menu selection does it recognize the battery? What are the statistics on that battery?
    It's also possible that the cable which connects the battery to the logic board is the point of failure. Due to the way that the MBA is manufacturer you'll be unable to proceed with "troubleshooting" this and the machine will require service.
    You can however, try resetting the SMC and see if that changes anything.
    http://support.apple.com/kb/HT1411

Maybe you are looking for

  • Developer Studio deployment problem

    Hi All, I'm unable to deploy from Developer studio. Error is 'Server XXX did not accept login request as admin on port 50018'. Looked into the documentation and put an entry in the host file too. but i still have the problem. Studio (2.0.4) Server: S

  • Uploading data from an excel file to ztable

    Hi, I tried to upload an excel file to ztable using fm 'ALSM_EXCEL_TO_INTERNAL_TABLE'.In the o/p I can see only 3 rows and all the date and time fields are not properly displayed in the o/p.What would be the reason?Can anyone give me a suggestion? Re

  • Is ATV seriously hungry for bandwidth?

    I installed my first ATV on my home network a few days ago. It set up easily and I had all features working beautifully. Last night I checked out my internet volumes (I'm on a quota system at home) and found I've way used more bandwidth over the past

  • Scanned Quantity Based on Invoice No and Material.

    Hi Experts, Document No Bill Type INVOICE NO Material Serial No Invoiced Qty 0ROWCONT 1107540470 F2 1107540470 INVARED500+ 28 10 1 1107540470 F2 1107540470 INVARED500+ 29 10 1 1107540470 F2 1107540470 INVARED500+ 30 10 1 1107540470 F2 1107540470 INVA

  • Get the Adobe Acrobat version

    Hello, For my next plugin I need to support Acrobat 8 and 9. The plugin will be installed in the correct installation path (in Adobe 8 or 9) during the installation. But I don't know if it's possible to know the Acrobat version used by the plugin. Do