What would cause my printer to only print about 3/4 of a 4x6 photo on a C4795?

What would cause my printer to only print about 3/4 of a 4x6 photo on a C4795?

eee! So many posts.
I currently have 2 harddrives hooked up. One has about 37.56 Gigs left on it (probably just over 3/4 full) and the other is nearly full. My files are saved onto it. I am editing in DV format and everything is rendered.
I have a drive allocated as the scratch disk.
I don't believe the drive is going to sleep. I would think it would effect my audio as well, since they are both located on the same drive.
For what it's worth, I ended up ejecting the drive I was using as I needed to do some other work and my system seemed to speed back up. I reopened Final Cut with and it's like my system isn't bogged down anymore. I may try capturing to tape using a different drive and see if maybe it was the drive itself that was bogging down my system.

Similar Messages

  • What would cause the printer to only print text in microsoft word but no images

    i have a  hp deskjet D1320 printer, windows xp operating system, and i have always printed greeting cards from microsoft word by inserting an image and then printing it with the printer set to duplex(2sided)printing option, so after you print the image you flip the card around and then print the text on the inside of the card. now the printer does not print any images when i insert the image and then click print it just runs 1 piece of paper through the printer and stops but it will still print text just fine, does anyone know what would cause this type of an issue?
                                                                  thank-you,
                                                                                     hwnugent

    Hi there hwnugent,
    Try downloading and running the print and scan doctor located here:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
    It can fix a lot on its own and if not give a better idea of what is going on. Let us know the results.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • I print 2 pages to pdf and file size is 600k, I print 1 additonal page and file size goes to 6M, what would cause this (graphics are same on all pages)

    I print 2 pages to pdf and file size is 600k, I print 1 additonal page and file size goes to 6M, what would cause this (graphics are same on all pages).
    I know the colour graphic shading in the document that causes the issue of larger file size, but it doesn't make sense that printing 1 additional page with same information as first 2 pages would cause this.

    I print 2 pages to pdf and file size is 600k, I print 1 additonal page and file size goes to 6M, what would cause this (graphics are same on all pages).
    I know the colour graphic shading in the document that causes the issue of larger file size, but it doesn't make sense that printing 1 additional page with same information as first 2 pages would cause this.

  • What would cause an IMAC to recognize one printer on a wireless network and not recognize another printer?

    What would cause an IMAC to recognize one printer on a wireless network and not another printer?  I have a smaller HP and a an HP 4600.  The computer recognizes the smaller printer but not the bigger printer even though the printer in Settings and shows up on Settings, but I cannot print to it. 

    Do you have a printer driver installed for it? When you open the Print dialog have you selected it from the Printer dropdown menu at the top of the dialog?
    Do you know that the printer is working and is properly installed (Added?)

  • When I play itunes from my laptop which uses a Y-cord plugged into a sound board, the songs fade in and out, softer/louder ...anyone know what would cause this? I have bought new cords, speaker cords, speakers...and the laptop is only 1 year old...

    when I play itunes from my laptop which uses a Y-cord plugged into a sound board, the songs fade in and out, softer/louder ...anyone know what would cause this? I have bought new cords, speaker cords, speakers...and the laptop is only 1 year old...

    when I play itunes from my laptop which uses a Y-cord plugged into a sound board, the songs fade in and out, softer/louder ...anyone know what would cause this? I have bought new cords, speaker cords, speakers...and the laptop is only 1 year old...

  • Printer will only print from computer won't copy from printer

    My  printer will only print items that i send to it from y email. when i walk out to the printer and try to make copies the pages all come out blank no matter if i use the document feeder or place them on the glass directly. i have turned it off and back on but the problem was not corrected. 

    Hi @sandylouise,
    Welcome back to the HP Support Forums! I see you are not able to make copies from the front panel of your HP Photosmart. I would like you to go ahead and perform a Hard Reset:
    1. Unplug all cables and memory cards from the printer. Unplug the power cord, directly from the back of the printer while the printer is still turned on.
    2. Unplug the other end of the cord from the power source.
    3. If there is a power module on the power cord, disconnect one end and reconnect it.
    4. After 60 seconds, plug the cord directly into a wall outlet (not a surge protector or battery backup as they can cause the printer to lose basic functionality over time).
    5. Plug the power cord into the back of the printer.
    6. The printer should automatically power back up. If it doesn't, turn it on with the power button.
    7. Try making a photocopy (if your printer is an all-in-on printer) before connecting any other cables to the printer.
    8. Connect any other needed cables to the printer.
    If after the Hard Reset you are still unable to make copies, please call our technical support at 800-474-6836 as it may be the hardware. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • How do I set up my printer to only print in black?

    how do I set up my printer to only print in black?

    Please read this post then provide some details.  What printer model? What operating system?   Depending on your printer model you might remove the color cartridge, forcing black only printing, or select "Print in Grayscale" and "Black ink only" in the driver. 
    Some printer models (whether from HP or other manufacturers) may not allow printing in black if the color inks are empty.  There are also some other constraints, black only printing is generally not available when printing on photo papers and may not be available when printing with an automatic two-sided duplexer.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • When trying to send a photo via email, I am prompted to setup an email account even though email is already setup.  What would cause this?

    when trying to send a photo via email, I am prompted to setup an email account even though email is already setup.  What would cause this?  Better yet, how do I fix it?

    I have checked this on my device.  I see a Default account under Messages created outside of Mail will be sent from the default account.  There is an account selected, though it does not show my exchnage account.  If it is only an exchange accout, can that not be used for this?

  • Printer will only print 10 pages at a time

    Printer will only print 10 pages even if I ask it to print 33

    Hi, are you printing from a mobile device or a desktop/laptop PC? What printer model do you have?
    Best
    If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
    If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
    I am an HP employee.

  • What would cause the original I Pad shut itself off while playing games or online? it is not a battery issue or time issue. When I turn it back on it goes to were I was  when I was online ,but have to start games over.

    What would cause the original I Pad shut itself off while playing games or online? it is not a battery issue or time issue. When I turn it back on it goes to were I was  when I was online ,but have to start games over.

    The original iPad has a slow processor and only 256 MB of memory so it often runs into low-memory failures.
    Double click the home button and dismiss all of the recents - I do that weekly.
    Then reboot by holding both the power and home buttons until the apple logo appears, ignore the red slider - I also do that weekly.
    Both seem to help to reduce the low-memory faults that occur.

  • HT3669 I have an HP deskjet color printer that only prints in black and white from my mac ... how do I get it to print in color

    I have an HP deskjet color printer that only prints in black and white from my mac ... how do I get it to print in color

    Check the printer itself.  Some printers you need to set the color & B&W settings on the printer itself instead of the Mac.   If that is not the case w/your printer, contact HP tech support and/or post in their forums if they have one. 

  • I've recently purchased an iMac and connected my HP Photosmart C4280 printer. The computer downloaded the driver software but the printer will only print in black and white.There doesn't seem to be anywhere to change this on the preferences menu. Any idea

    I've recently purchased an iMac and connected up my HP Photosmart C4280printer. The computer downloaded the driver but the printer will only print in black and white. I've looked in preferences etc but cant see any way to change this. Any ideas??

    Select a document, CMD+P, and set the color options as shown here:

  • DPS: pinch and zoom function not working on all pages within folio (v30 tools using the pdf setting). What would cause some pages to pinch and zoom fluidly, while other pages appear a bit sticky? Could it be a button on the wrong layer?

    What would cause some pages in the same folio to pinch and zoom fluidly, while other pages appear a bit sticky? Could it be a button on the wrong layer that's not allowing the pinch and zoom to work?
    I do have a "go to state" button that enlarges graphic to full page on the page. Could this be cancelling the pinch and zoom functionality? Would a box with text wrap ON affect the ability to pich and zoom? What else may be causing this?

    What would cause some pages in the same folio to pinch and zoom fluidly, while other pages appear a bit sticky? Could it be a button on the wrong layer that's not allowing the pinch and zoom to work?
    I do have a "go to state" button that enlarges graphic to full page on the page. Could this be cancelling the pinch and zoom functionality? Would a box with text wrap ON affect the ability to pich and zoom? What else may be causing this?

  • When I press ALL in print options, my canon printer will only print the first page.  It is connected to wifi

    when I press ALL in print options, my canon printer will only print the first page.  It is connected to wifi

    when I press ALL in print options, my canon printer will only print the first page.  It is connected to wifi

  • HO D110 series printer will only print half of page get error

    Ever since I got a new lap top that has Windows 8 my printer will only print half of the page and then stops. I get an error message. I have used the online Wizard and downloaded the new driver but it still won't work. Also can't print wirelessly still from other devices.

    Hello mrshayes,
    I saw that you have a new laptop with Windows 8 and now the printer is printing half a page and will not print any more. I understand you also cannot print from other devices. I have some suggestions for you.
    First, try to make a standalone copy from the printer itself. If the copy is successful, the printer tests out okay. If the copy fails, try resetting your printer and ensuring it is plugged in directly to the wall outlet, avoiding power bars, surge protectors, etc.
    Here is a link on how to reset the printer: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03177455
    If the copy works fine, see if there is a Firmware Update needed: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02919168
    Also, run the Print and Scan Dr. to detect any issues. This tool might fix the problem.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&softwareitem=mp-126353-1
    Please let me know if you run into any troubles and I will do my best to help.
    Thanks!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Maybe you are looking for