What would cause the display to be blurry and fuzzy

What causes the display to be blurry and fuzzy

Have you dropped the iPad?
Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
 Cheers, Tom
BTW - You don't need to double post.

Similar Messages

  • What would cause the microphone in the iPhone 3Gs to stop working?

    What would cause the microphone in the iphone 3Gs to stop working?

    Basic troubleshooting steps are restart, reset, restore.  If these are tried and you still have problems then you have a hardware failure and will need to have your phone replaced by Apple.

  • What would cause the original I Pad shut itself off while playing games or online? it is not a battery issue or time issue. When I turn it back on it goes to were I was  when I was online ,but have to start games over.

    What would cause the original I Pad shut itself off while playing games or online? it is not a battery issue or time issue. When I turn it back on it goes to were I was  when I was online ,but have to start games over.

    The original iPad has a slow processor and only 256 MB of memory so it often runs into low-memory failures.
    Double click the home button and dismiss all of the recents - I do that weekly.
    Then reboot by holding both the power and home buttons until the apple logo appears, ignore the red slider - I also do that weekly.
    Both seem to help to reduce the low-memory faults that occur.

  • What would be the difference between sling:folder and nt:folder?

    what would be the difference between sling:folder and nt:folder?

    See,
       As Nicolas said, there are some things that you can do only in a sling:folder type of node.
       The "nt" means "Node Type", and a "node type: folder" is just a empty node that can be referenced as a organizational structure file folder. The "sling" prefix means that this one special folder belong to the type "Sling", in other words, that folder type node is built in the sling Framework structure and is constructed with some setting already, which I do not know to tell you. Take a look at "/libs/sling/nodetypes/sling.cnd" on you CRXDE Lite or CRXDE.
    (I may be wrong about some details, eveything here is what I believe myself after some research and experience)

  • What would cause the printer to only print text in microsoft word but no images

    i have a  hp deskjet D1320 printer, windows xp operating system, and i have always printed greeting cards from microsoft word by inserting an image and then printing it with the printer set to duplex(2sided)printing option, so after you print the image you flip the card around and then print the text on the inside of the card. now the printer does not print any images when i insert the image and then click print it just runs 1 piece of paper through the printer and stops but it will still print text just fine, does anyone know what would cause this type of an issue?
                                                                  thank-you,
                                                                                     hwnugent

    Hi there hwnugent,
    Try downloading and running the print and scan doctor located here:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
    It can fix a lot on its own and if not give a better idea of what is going on. Let us know the results.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • What would cause the flash not to fire?

    What would cause 580ex not to fire?

    Can you be more specific?
    When you power it on, you should get a red Pilot light when it's ready to fire.  If you press the light (it's a button) it should test-fire the flash.  That will confirm the flash actually works.
    You can tell the camera to disable the flash... this is useful when you just want to use the flash's focus-assist beam to help the camera lock focus, but do not actually want the flash to fire.  Check your camera menu... probably under "External Speedlite Control" -> "Flash Firing" and check that it is set to "Enable".
    Tim Campbell
    5D II, 5D III, 60Da

  • What would be the simplest way to view and take control over the internet?

    Hi All:
    Can some one tell me what would be the best and simplest way to connect from my laptop to another laptop through the internet?
    I have DYNdns running on the second laptop and have a host name assigned to that system for it to update the IP since the system uses different internet connections. The services that I would like to be able to have are the viewing and controlling of the system. I've read some where in this NG that if I have a copy of ARD admin. installed on that system also, it would be one way to do it... can some one verify this and please let me know if there are any specific settings I need to have on either one of the systems.
    I can connect to the second laptop while in my home network with no problem and perform all tasks. when trying to connect through the internet.. the system shows offline .
    Both systems are identical in hardware an software, Intel 2.16, 2G's RAM, OS X ver 10.5.2 all up to date and ARD 3.2
    Yes, I'm new to ARD and yes I'm searching the NG and the net. but I figure it doesn't hurt to ask since time is limited.
    All help greatly appreciated ..
    TIA
    Oscar A.

    To be able to connect to a workstation from outside it's network, the ports that ARD uses must be open on both ends of the connection. ARD uses ports 3283 and 5900 so those must be open.
    If your workstations get their addresses from an NAT device rather than being "real", the ports also need to be forwarded in the router to the workstation's internal IP address. ARD uses port 3283 for the reporting and updating function, so if your Macs are getting their IP addresses through NAT, since you can only forward a port to a single workstation, you can only get reports, push package/files to etc. for a single workstation.
    ARD uses the VNC protocol for observation and control, though, and there are a range of IP addresses for that protocol, starting with 5900. ARD uses 5900 by default, so that port would be forwarded to the first workstation. You would, I believe, need to install VNC servers on the systems (since the ARD client cannot listen on any port other than 5900 while VNC servers can be set for other ports such as 5901, 5902, etc. You would then forward 5901 to the second workstation (and on to 5902, 5903, etc.). You can then use the following information:
    Remote Desktop 2: How to specify a port number for a VNC client
    to connect.
    The only other options are: 1) to run the ARD administrator on a workstation on the network, and then take control of that system from outside, either via VNC or another copy of ARD, or 2) set up a virtual private network (VPN) so that when you connect from outside, your admin system is officially part of the local network.
    Hope this helps.

  • I have a macbook pro 10.6.8 system.  My hard drive was replaced under warranty.  Since then, my computer runs hot. The original hard drive never ran hot.  What would cause the new hard drive to run hot?

    I have a 2011 MacBook Pro, OS X 10.6.8, 2.2 GHz Intel Core i7,  4 GB 1333 MHz DDR3.  This is my first computer so don't know anything about trouble shooting.  A week before the warranty expired, I took my computer to Apple to be checked.  I was told that my hard drive was bad and they replaced the hard drive.  Since then, my computer runs hot most of the time and the fan is constantly coming on, which is good  My computer rarely ran hot with the original hard drive.  What would be causing this? 

    racergirl,
    have you tried resetting your MacBook Pro’s System Management Controller, to see if that makes a difference with the heat?

  • What would be the impact of changing Enterprise and Domain admin password

    Hello,
    I'm planning to change the Enterprise/Domain Admin's password for some security reasons. I do not know what all will fail, what are all the process is going to be impacted. Actually I don't want to see the bigger impact after changing
    the password.
    I've gone thru' few articles but it's in Powershell where I have the limited knowledge & can't customize the script.
    Is there a tool or a way to scan the LAN/Servers and get a clear output where these users accounts (Domain & Enterprise Admin) being used, especially windows services wise, and all other dependencies?
    Can anybody help?
    Regards,
    MSK

    Hello
    As far as I have experienced by changing the enterprise admin password there will be no impact on the environment, not event on
    Services.msc console. But resetting an account is a different story. If you change the user account, services which relies on the user will be updated automatically but by resetting the password you have to manually enter the password on each
    service.
    Also I am thinking about if you use remote desktop with saved credentials to connect to DC's as enterprise admin, you may experience account lockout problems. So wise move is to create another account as member of enterprise admins group and keep it safe
    with a strong password and save it for a rainy day. In that case if the original enterprise admin locked out due to incorrect logons you have a gold key to overcome the situation.
    Regards.
    Mahdi Tehrani Loves Powershell
    Please kindly click on Propose As Answer or to mark this post as
    and helpfull to other poeple.

  • Monitor display issues: what would cause the monitor to show really off colors?

    When booted from my DVD startup disk the colors are fine.  When using the computers startup, the colors are like a 35mm film negative. Any ideas out there?

    troydimock
    This solved my  question:
    Images on Monitor are all "negative" (colors are reversed) since cat wa
    Nov 13, 2006 6:29 PM (in response to BGreg)
    control-option+command8

  • What would cause the computer to have a continuous knocking sound below the key board on the right hand side?

    I have had my MacBook Pro since the middle of 2009 and am concerned that this continuous knocking sound that is inside and on the right side of my computer is indicative that my computer is starting to die on me. Has anyone experienced this same issue? And if you have what was the determined cause.
    Thanks you

    raymar65 wrote:
    Hello Barney, its microsoft office 2008 , not sure how to revert to original shipping thanks Ray
    There should be disks that came with the Mac. Gray in color, likely two of them. One is the installer.
    As I mentioned, I'm not sure if just booting into the installer and erasing the drive with Disk Utility is simple with the recovery hd. However, there are other posts around here I've seen discuss reverting to Snow Leopard, so I'm sure you can find something that describes it. 
    If you've lost the disks, you should call AppleCare and order replacements for the new owner. They'll need the serial number which you can find from About This Mac (click on the version number twice).
    As for Microsoft 2008, I would suggest that the new owner install that before installing Mountain Lion.

  • What would cause the Messages App to only work intermittently?

    The first letter typed should switch the Send button on indicating things are ok, more often than not this doesn't happen. Settings seem to be right so what else might be causing this?

    I'll bet the lightbulb for execution highlighting isn't visable either is it? The problem is that someone turned off debugging for the VI in question. Debugging code does cost a little time so people who typically run their applications in the development system will sometimes turn off debugging. (Building a standalone application forces debugging off automatically).
    To be able to probe your routine, right click on the vi's icon in the title bar and select "VI Properties..." and go to the "Execution" catagory and make sure the box labled "Allow Debugging" is checked.
    This should put things right...
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • What would cause the speaker in my iPad (III) to stop working suddenly?

    I was listening to a podcast yesterday when the sound got staticky and the speaker  stopped working. I tried plugging in external speakers and those do work, but that is the headphone jack . If I try to play a game with sound, it comes on very low - no matter how high up I have the sound- and then fades after about 30 seconds. The iPad not quite four months old and is in an OtterBox case, and has been since day one. Any ideas on what could have happened and if this may be something covered by the warranty? Thanks!

    Mommylinda wrote:
    I...I am in Japan and doubt they speak much English in the Tokyo store!
    You'll be pleasantly surprised,

  • What would cause the screen to swith between backgrounds as if it is being controlled remotely? the system had created 7 new folders on it's own.

    System is currently switching between mutliple screens without me touching it. The system has created several new folders. The system is performing as if it is being remotely controlled.

    How recently did you switch?  If it's less than 60 days, then Verizon simply reinstates your previous account.  The fact that you were on the EDGE plan and mailed the devices back, and they apparently are somewhere in the system, could cause complications, and it might just work out that you just go back on the same plan and they set you up with the same devices.  I'm not sure how it will go - but since you are still being billed for the devices... 

  • What would cause the EVA WWN to change

    Good Morning,
    After a scheduled power outage my EVA P6000 Management Module changed its World Wide Name automatically causing our licenses to not load.  Does anyone know of any possible causes?

    Can you be more specific?
    When you power it on, you should get a red Pilot light when it's ready to fire.  If you press the light (it's a button) it should test-fire the flash.  That will confirm the flash actually works.
    You can tell the camera to disable the flash... this is useful when you just want to use the flash's focus-assist beam to help the camera lock focus, but do not actually want the flash to fire.  Check your camera menu... probably under "External Speedlite Control" -> "Flash Firing" and check that it is set to "Enable".
    Tim Campbell
    5D II, 5D III, 60Da

Maybe you are looking for

  • Button is disabled or not in the next page

    i have a scenario i have two JSP pages in which from the first we will be redirected to the second page. in the second page we have a save button. the save button will be disabled in some conditions. if the save button is disabled then we have to kee

  • How to Sync pictures from AD for users in Outlook Contacts?

    Hi we recently enabled adding profile pictures to AD from sharepoint.   This works fine, the attribute shows in AD and the pictures show in Lync.   Now in Outlook there are soem inconsistencies.   I am are running Outlook 2010 windows 7 64 bit.    Th

  • Delete a Custom Node from IMG

    Dear All, I have a custom table (Z or Y table) for which, I have also created the Table Maintainence Generator(TMG). For this custom table, I also added an entry in IMG. For some reason, now I want to delete this table. In a step-wise process, I dele

  • How do i set up 2 seperate itunes accounts on the same comupter, how do i set up 2 seperate itunes accounts on the same comupter

    hi my mum has a new ipad which was set up at my uncles house down south . my niece has blocked the ipad putting the wrong password into it and i need to reset the ipad back to the original settings but dont know how to set it up having 2 seperate acc

  • Displaying HttpRequest Parameter in UIX page

    Hi team, On one page I select a value from a dropdown list - this gets saved as a request parameter on the sessionData (standard behaviour). 16:06:57 DEBUG (JhsActionServlet) -Parameter Shipment: 121What I want to do is refer to that value in a subse