What would stop PPTP or L2TP from Passing through SRP527W

Hey i have been trying to setup the SRP527W to allow VPN access ether via PPTP or L2TP/IPSEC to a Wiindows server!
short story! the old ADSL Router Died and looked for a more reliable one purchased SRP527W configured ports to forward to Server
4500, 1701, 1723, 500 and 433
I enabled the VPN Passthrough for L2TP, IPSEC and PPTP
i know about the GRE Tunnel unsure if its setup Correctly
Tunnel Number: 1
Tunnel Name: Workplace
Enable: Yes
Checksum: none
Sequence: none
Key: None
key Value: N/A
Wan interface Name: PVCO
Destination IP or Hostname: 192.168.XXX.XXX
Remote IP Address/Subnet Mask: 10.0.0.0/8,172.168.0.0/16, 192.168.0.0/24

eee! So many posts.
I currently have 2 harddrives hooked up. One has about 37.56 Gigs left on it (probably just over 3/4 full) and the other is nearly full. My files are saved onto it. I am editing in DV format and everything is rendered.
I have a drive allocated as the scratch disk.
I don't believe the drive is going to sleep. I would think it would effect my audio as well, since they are both located on the same drive.
For what it's worth, I ended up ejecting the drive I was using as I needed to do some other work and my system seemed to speed back up. I reopened Final Cut with and it's like my system isn't bogged down anymore. I may try capturing to tape using a different drive and see if maybe it was the drive itself that was bogging down my system.

Similar Messages

What would stop the phone from displaying sideways?

What would stop the phone from displaying sideways?

Not all applications display in landscape.
or the lock button on the side is set to lock rotation.

Changing from "Pass Through" as Default in Blend Mode in a Group Folder Layer Set

Hello Forum gurus!
Using a MacBook Pro, 10.5.4. Painting with CS2. My question is two-fold.
When the Group layer folder in a layer set is selected, it is displaying the "Pass Through" blend mode by default. Is there a special convenience to this? (Best use for pass through blend mode)
Also, How may I change the default in this mode to be "Normal" as the setting when creating a Group folder layer set?
Thanks!!
Colene

Matthias, now I understand. We're both right from different perspectives. If you want the adjustment layer (should there be one within the group) to affect all layers below the group (perhaps because that's the way the image looked before you made the group in the first place), then Pass Through is your blend mode. If you want that adjustment layer to affect only those layers within the group (which I often do), then Normal (or some other) is your blend mode.

AGP 4X what would be some top performers from this era?

Hello. I have a PC that has a 2.4Ghz CPU & 1.5Gb RAM on a WinXp 32-bit system powered by a 400W PSU.
The AGP (no PCI-E) is a 2X/4X slot and from what I can gather is a first generation 2.0 compliant. I have read that most if not all 8X cards are backwards compliant but a very real possibility of the voltage signaling level can cause instability or a card not working at all or even damage to ones card/system.    I also am not sure of the voltage signaling level of my slot. I have only been able to find one person that informed me that because the slit in between the two connecting blocks of my old AGP card is further back from the back of the card (that is to say the larger block is closer to where the metal bracket is at the back of the desktop) that I have a 3.3V keyed slot. Although if I am using a 4X card I assume it can handle 1.5V's with no problem.
With that info. mentioned I am wondering what some of the best performers are that would be at 4X. I have tried a few games with this card (Sapphire Radeon 9600XT DDR 128MB, which I know many run hot and this one although still working has burned out it's own fan!) as I have tried a few games such as MS Flight Sim X, Bio (something) and some sniper 3 game and they were very choppy during play (very ) so something with more memory, processing power would be a nice addition to this aged system. Unless of course there is an 8X card that would not damage this system.
Thank you very much,
Mumford68

I stand corrected, found an 8X/4X card -
PNY - GeForce 6200 256MB AGP Graphics Card
here at best buy. Below are some specs.
Lifestyle:     Mainstream
      Chipset:     NVIDIA GeForce
      GPU Series:     NVIDIA GeForce 6
      GPU/VPU:     NVIDIA GeForce 6200
      RAMDAC:     Dual 400 MHz
      Fill Rate per Second:     1.4 Billion Texels
      Vertices per Second:     263 Million
      Maximum Resolution:     2048 x 1536 @ 85Hz (Analog)
      Video Memory:     256MB
      Memory Type:     DDR
      Memory Interface:     64-bit
      Interface Type:     AGP
      Interface Speed:     4x
       8X

What is stopping my iphone 4 from downloading latest security patch

when downloading latest security patch the downloading bar will onl move about 3/8 inch and stop, show Apple icon and go to home screen. What could be causing this

Hey Kmac00505,
Thanks for the question, I understand how frustrating this may be. If you are having issues updating your iPhone, it may be best to follow the steps in this article:
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Thanks,
Matt M.

HT201317 what would cause problems uploading photos from pc to ipad?

Photo stream not working from PC to ipad. Photo stream is enabled and wifi on.

I have this question too!

What would prevent createobject ("application.illustrator") from working in a VB Script

I have an automated process that monitors for Illustrator Docs and saves them as PDF.
The script is invoked from a service and was working fine, in the middle of processing, we starting getting the error "ActiveX component can't create object"
The error number is 429.
If I run the program interactively it works fine.
I am running the service under a named account that has local admin privlege to the box.
Windows2003 Standard, SP2
Illustrator 15 CS5 Design Premium.
From everything I can tell nothing on the machine has changed.
No updates, etc.
I have tried reinstalling Illustrator
All adobe patches are up to date.
I have tried creating a different account and get the same result, works fine running interactively, can't create object id script is invoked from a service.
Interestingly, you do see Illustrator.exe process in memory for a few seconds, the memory stalls ~30K and doesn't move.
When you run interactively the process is very active and memory grows was past 30K
Very baffled by this, any thoughts or insight is appreciated.
Greg

Good morninig,
Did you check the VBA menus tools\references to be sure that you use the lastest Library (Adobe Illustrator CS5 Type Library). If you have oldest dll try to remove them.
On PC opening Illustrator before using VBA macros is also a good approach.
Good luck
Patrice

I am using iphone 5s, glass got broked, where can i get the original panel and what would be price

i am using iphone 5s, glass got broked, where can i get the original panel and what would be price

If you are from India ,here is how you get Out of Warranty service in India
Out-of-Warranty Service
Please contact an iPhone Authorized Service Provider for out-of-warranty service options.

RV042G cannot support more than 2-3 IPSec Pass through connections

Hi,
I'm trying to figure out what the max number of IPSec VPN pass through connections the RV042G can handle. We bought an RV042G router to replace our old RV042 box which was running into connection limitations. There are approximately 15 people in the office and anywhere from 5-8 of them need to vpn to a single client site. There seems to be an issue with UPNP where it creates the proper port forwarding but doesn't associate it with an internal IP address. Giving each workstation a static internal IP doesn't solve this issue. The remote site we are connecting to does have NAT-T turned on. What ends up happening is that after a while, users cannot vpn. Sometimes it happens with fewer than three users. Clearing the UPNP and rebooting the router helps but eventually if you connect and disconnect, a few times, you're hosed. The UPNP doesn't release the setting it makes in a timely fashion. Is there any way to fix this besides turning off UPNP which we need for other software to work?

Lenovo support (for me in Canada at least) is based in Atlanta, so I'm surprised you found a tech with bad English...
Your problems sound like windows problems, not hardware problems -- are you running XP or Windows7? If you google based on your OS, there are threads to be found on slowing down the start menu behaviors.

I am passing range table from the method of ODATA Service to FM but In FM range table is becoming initial.What would be the reason for the same?

I am passing range table from the method of ODATA Service to FM but In FM range table is becoming initial.What would be the reason for the same?

Vinod, Can you share detail on how are you sending and how are you reading.

What would cause Safari to stop running Adobe Flashplayer?

What would cause Safari to stop running Adobe Flashplayer? It's on my computer. It works with other browsers. Most websites don't complain. When I ask them to show me stuff, however, it comes out looking like a math problem written in Turkish or Romanian.
What about pdf files? Same thing.

From the Safari menu bar, select
Safari ▹ Preferences ▹ Security
and check the box marked Allow other plug-ins.

Dreamweaver sudenly stopped connecting to website, fine one day then cannot connect the next. I can connect using CUTEFTP any suggestions what has stopped dreamweaver from connecting?

Dreamweaver suddenly stopped connecting to website, fine one day then cannot connect the next. I can connect using CUTE FTP any suggestions what has stopped Dreamweaver from connecting?

Have you tried clearing DW's program cache yet? That's usually my first step if something "just started happening"...
Deleting a corrupted cache file
Server updates can cause DW to need a setting change. Have you already tried toggling Use Passive FTP in your site settings yet?
Has anything changed on your local network, like an update to a firewall?
If you are connected via wireless router, a low likelihood but possible thing to test would be a wireless router problem. Try connecting the computer directly to your modem, bypassing the wireless router (if you aren't using an all in one modem/router setup) to see if that makes any difference.

What would happen if I turn off my backup and delete backup data From my device? Will it delete my music and everything for ever or just stay in the cloud but not on my device?

What would happen if I turn off my backup and delete backup data From my device? Will it delete my music and everything for ever or just stay in the cloud but not on my device?

If you have multiple devices backing up to the Cloud, you will see all of them listed. You would click on each device to change what is backed up from that device. You can then delete your individual back-ups.
Once you have all your settings to your liking, you can then go back to Settings>iCloud>Storage & Backup, and click on Back Up Now (bottom of the screen) to create a fresh backup with your new settings.
Cheers,
GB

I want to delete my icloud-account from my iphone 5 and then register again, because I want to change my email-address/account name. What would be the steps to follow? How do I make sure I do not lose any information stored on/in my iphone 5?

I want to delete my icloud-account from my iphone 5 and then register again, because I want to change my email-address/account name. What would be the steps to follow? How do I make sure I do not lose any information stored on/in my iphone 5?

You would have to delete the existing iCloud account and create a wholly new one - you cannot change the @icloud.com email address of the one you already have. To make a new one, you will also need an new AppleID as any AppleID can only have one iCloud account associated with it.
Deleting the account will not delete anything off your device (if prompted for things like contacts, choose to keep them). You will have to sync everything anew with the new account as you cannot move your sync'd content, your old backups or anything else from one iCloud account to another. You will have to set up sync again and let it sync to the new account, and then make new backups to the new account as well.

Had a windows computer with my element 7. Now just bought a Mac OSX version 10.9.2 what would be the best photoshop elements for this machine. I did download elements 12 from Apple store but kept getting incompatible message when trying to open a phot

I thought elements were simple but maybe it is just me. Having problems moving photos from iphoto to elements

Duplicate post; see:
had a windows computer with my element 7. Now just bought a Mac OSX version 10.9.2 what would be the best photoshop elements for this machine. I did download elements 12 from Apple store but kept getting incompatible message when trying to open a phot

What would stop PPTP or L2TP from Passing through SRP527W

Similar Messages

Maybe you are looking for