What would the ideal LR data BU workflow with Mac??

Assuming one was running Leopard and was running Time Machine and had an external eSATA or FW 800 drive with 2 large partitions on 2 drives set to mirror the data (RAID 1) what would be the ideal LR2 data storage and BU setup?
Opinions please

Far too many reports of problems between the Minis & Samsung Monitors for me to recommend or consider them. Might not even be Samsung's fault, just the combination.
Here's one of the 19,600,000 hits for mac mini samsung problems...
https://discussions.apple.com/thread/4497508?start=0&tstart=0
Some have fixed it, others not...
http://forums.macrumors.com/showthread.php?t=1219294
https://discussions.apple.com/message/20254867#20254867#20254867
http://macs.about.com/b/2012/12/10/apple-releases-firmware-update-for-2012-mac-m ini-to-fix-hdmi-issues.htm

Similar Messages

What are the ideal settings for my TC with Shaw's Cisco DPC3825 router/modem

My old 2nd Gen Time Capsule crapped out and now I am about to set up my new 2TB TC. My provider is Shaw Communications and they have upgraded me to their Broadband 100 Mbps service. This came with a new modem/router combo made by Cisco and is model DPC3825. Before I start plugging things in I'd like to know what are the ideal settings such that I gain the most of the BB100 service. Should I be setting the Cisco modem/router to Bridge mode or the TC? Should I have Shaw disable anything? Any insight is greatly appreciated.

Unless you specifically need to have the TC perform as the main router for your network, life will be a lot easier if you configure the TC to operate in Bridge Mode.
Whether the Cisco modem/router or gateway can possibly be configured to act as a simple bridge mode modem is one thing to consider.
Whether Shaw would support you in the event of any connection difficulties with the modem/router configured this way is another.
Since Shaw is your provider, it might make sense to talk with them about best practice as far as configuring the DPC3825.
Once you have that information in hand, you will then have the answer on how best to configure the TC.....which will very likely be in Bridge Mode.

What is the use of Data packet dim with Virtual cube with services

Hi Friends,
Could anybody tell me what is the use of Packet dimension in Virtual cube with services , It cannot contain data persistently ,Just fetch at runtime,Then there is no Physical load happening,Then why it should be automatically created for this??
Message was edited by: Pradeep choudhari

Hi Maik,
Unit dimension will not be created automatically until and unless you have keyfigure referning units..
But my question is : Why should we have data pack dimension , which is useless in this case of Virtual cube with services.It should not be created automatically!! What do you say??

What is the factory admin password that comes with mac air laptop

i am trying to update to Yosemite on but it is asking to put in my administrator password. I have not changed it ever. I am trying to find out the password that comes from factory. Does anyone know?

There is no default admin password, as no accounts exist on the computer out of the box.
Its asking for your password.

What are the ideal specs for professional graphic designer using CS5 illustrator, photoshop and indesign?g

What are the ideal Mac Pro specs for a professional graphic designer using CS5 Premium- using mostly InDesign, Illustrator and PhotoShop?

24GB RAM
SSD for boot drive
GHz, but not necessarily dual. Apple doesn't sell dual 3.33s.
A single 3.33 6-core should do fine and "sweet spot" (when looking, there is "4-core" build to order..,. and like everything else on the Store, why in heavens they didn't be more accurate and clear and say "single socket" and then have "dual processor configurations" 0 I guess the writers don't understand or know workstations or jargon? I say that 'cause some have trouble even finding the 6-core 3.33 choice ($1200 over stock 2.8 4-core).
W3680 though can be found on Buy.com for $620 (was $589 at earlier date) and people are known to then sell the stock cpu $300 making it even more attractive and save $600-900 that way rather easily. Or not.
But yes, I would send you to MPG.com site as well and read through what is on there.

What are the ideal specs for a DigiBeta master tape when authoring a "widescreen anamorphic" 16:9 SD DVD (original aspect ratio is 14:9)?

I just received the masters for a new SD DVD. I would like to author a "widescreen anamorphic" SD DVD horizontally squeezed widescreen image stored in a standard 4:3 aspect ratio DVD image frame. (On 4:3 displays, mattes should preserve the original aspect ratio. On 16:9 displays the image will fill the screen at the highest possible resolution.)
Below I've listed the specs of the Digi Beta master tapes the producers have sent to me for digitizing. I'd like to know this: What are the ideal specs for a DigiBeta master tape when authoring a widescreen anamorphic SD DVD, using material with an original aspect ratio of 14:9?
I've also listed my guesses below. Please let me know if my guesses are right. If not, please suggest alternatives (and if possible explain why.)
TECHNICAL SPECIFICATIONS OF EXISTING MASTER:
Tape: DigiBeta
Original Aspect Ratio: 1.55 (14:9)
Vid Rate: 29.97 fps
Pixel Aspect: NTSC - CCIR 601
Frame Size: 720 x 480
Anamorphic: Full-Height Anamorphic (16:9 image displayed in letterboxed, non-distored 4:3)
Display Format: 4:3 Letterbox
MY GUESS AT IDEAL TECHNICAL SPECIFICATIONS (for a DigiBeta, that is):
Tape: DigiBeta
Original Aspect Ratio: 1.55 (14:9)
Vid Rate: 29.97 fps
Pixel Aspect: Square
Frame Size: 720 x 540
Anamorphic: YES
Display Format: 16:9 Anamorphic (horizontally squeezed widescreen image)
Please feel free to ask for clarification or further information you need to answer my question.
Thank you so much in advance for your help!
Best, Noetical.
BTW, I can't wait for the day when everything has gone digital and we get digital intermediates instead of tapes to digitize!

Hi Nick...thanks for taking the time to reply to my question.
Nick Holmes wrote:
What you have there is a mess.
NTSC pixels are never square.
NTSC is 720x486, even when it is Anamorphic.
You shouldn't be using an already letterboxed master to make an Anamorphic version. Get the master that was made before the letterboxing stage.
When you make an Anamorphic DVD it should display as 16:9 full screen automatically on widescreen TVs.
The same DVD will automatically letterbox on 4:3 TVs.
Um yeah...duh. That's exactly what I was trying to explain in the preface of my question. I'm sorry if I didn't make it clear...all these things you mention are the reasons I'm putting together a list of the technical specs of the DigiBeta I need so I can have them send that instead of the stupid letterboxed version.
Look, I'm sending this request to some intern at their offices in England, asking for a master with which I can make an Anamorphic DVD. They already sent me this master, which as you and I both agree is an idiotic asset to use for these purposes. As such, I was hoping for advice on a more precise way of requesting the master that I need than asking for "the master that was made before the letterboxing stage." Upon reflection, perhaps I'll just do that. If you or anyone else has a suggestion about something I should add to my request that would improve the odds of them sending the tape I need, please repond. Thank you!
BTW, It's been a long time since anyone has responded to something I've written or said as though I'm an idiot. I remember now that I don't really like it. (Moving along...)

What would the Smart Collection criteria be to isolate files in a folder but NOT in a collection?

What would the Smart Collection criteria be to isolate files in a folder but NOT in a collection?

or else FAR more simply,
though in practice, the difficulty may lie with how fuzzily or precisely the search text used, applies.
QUESTION
I'd be very curious to know, does anyone know how to search on a section of a full folder path rather than on the individual parts of that?
My folders are structured by LR at import, as (e.g.) 2014 / 01 / 27 for 27th Jan 2014.
So if I wanted to use a Smart Collection to search for (among other things) images in July 2013, I can search multiply on includes all of "2013" and "07" but that also throws up in my case, images which were taken on the 7th day of other months during 2013. I could search on a date range, though that's a little more laborious, or else do what I otherwise prefer, which is by keywords and other attributes plus (possibly) just year.
If I could search on folder path includes the string "2013/07" this would work fine. But I haven't found a syntax that does that (yet, assuming it is possible at all).
RP

When I call nifGetObjectDictionary on a Domain Index, what is the format of data returned

hello,
When I call nifGetObjectDictionary on an Active Schedule Domain Index (450) of NI Card, retrieved from S-OD -> DLL Link Schedule OD Index, what is the format of data returned? I received 0801C202FFFF000000 as data and it is not matching with FF-Spec (Field Device Access Agent, page 95).
Could you please let me know the format/structure of the data i received, so that i can parse them and understand?
Also let me know is there any API available in NI API to upload/read Schedule Domain?
Thanks
Shankar.

Sorry for replying late!
We don't have the nifGetObjectDictionary function, so may I make a guess that you mean nifGetObjectDescription? If I'm right, there will be some trouble.
To be honest, basically we don't support the APIs which are not included in the "NI-FBUS CM Function Reference Manual". In further, would you please let me know how you find this kind of internal functions? We cannot support it until we verify the customer has bought the complete version of APIs package and this package is still in the support period. If it matches your case, would you please help me in the verification? And then we can support the details for your question later.
On the other hand, we don't have the APIS to upload/read Schedule Domain now.

What would the cost be to add an Ipad to my account

What would the cost be to add an Ipad to my account

$10 if you are on Share Everything. Plus, look to see if you need to increase the data you currently have to accomodate for the extra usage you will go through.

What would the benifits be to getting an iPad with cellular

what would the benifits be of getting an iPad with cellular?

rbrylawski wrote:
Of course, if you have an iPhone, you can tether the 3G data to a Wifi only iPad. And most carriers sell Mifi (portable hotspots). So, point number 2 may not be as important. And quite honestly, not having a true GPS chip hasn't, at least for me, been a negative issue.
Don't forget, however, that using external MiFi hotspots is very awkward because
- they need to be constantly powered on/off when you need to connect via them
- when you regain true Wi-Fi access, the iPad won't disconnect from your MiFi but go on using its connection. You need to switch networks manually.
It's mostly the latter that I hated the most when using my iPad 2 with an external MiFi. (And this is why I've switched back to a 3G model when purchasing the iPad 3. No need to manual Wi-Fi network switching any more - what a relief!)

What deterimes the amount of data in a waveform from a TDS 1012 scope

Hello,
   What determines the amount of data that is in a waveform that comes out of a TDS 1012 scope? I am assuming that I will have to look at the driver vi to determine the commands sent to the scope to figure it out. I am in a situation that I need to have the y axis to have a high resolution, that results in very little data being collected from the scope.
Regards,
Kaspar
Regards,
Kaspar

Hello,
    The amount of data that comes out of the TDS 1012 scope is determined by the data start (DATaTARt)  and data stop (DATaTOP)  commands that are defined on page 58 (2-38) in the 346 page programming manual for the scope. I found of that the data start was not set to 1, which is the beginning of the data.
    I also had a very low level signal on channel that was all most unreadable by the scope that caused me to think that I was not getting all of the data.
Regards,
Kaspar
Regards,
Kaspar

What are the Non SAP data sources supported for Analysis workbooks?

AO 1.4 SP6
BO 4.1 SP2
What are the Non SAP data sources supported for Analysis workbooks?
Thanks.

HANA is a data source (which could contain non-SAP data)
For other Excel front-ends that may connect to "non-SAP" data look at Live Office or Power BI by Microsoft - see Excel and Power BI connectivity to SAP BusinessObjects Universes | Power BI

What is the ideal resolution for photos when creating a photo book in iphoto?

Can you tell me what is the ideal resolution for photos I use to create a photo book from my iphoto library?

The DPI depends on the size of the image to be printed by the image file. A 639 x 960 image could print a 3.5 x 5 photo at 180 DPI. This website explains it further: The Myth of DPI.
So use the smaller photos only in the smaller frames on multiple photo layouts for best results.
OT

Can you get a battery replacement at an Apple store while you wait? What would the rough cost be, out of warranty?

Can you get a battery replacement at an Apple store while you wait? What would the rough cost be, out of warranty?

I am not sure what device you are trying to replace the battery on, but usually the battery is at least 30% of the cost of the device from what I have read. Apple likes to keep a monopoly on batteries I think. I have never seen them replace a battery at the store, usually they have to ship it out. You can find batteries for sale online, but you will have to crack the device open yourself.

What is the purpose of Date From and Date To In Oracle HRMS ?

hi
I have doubt on
What is the purpose of Date From and Date To In Oracle HRMS?
Thanks

Where do you see these fields? Please give full details (eg, the navigation path).
If you're referring to Effective Start Date and Effective End Date (effective_start_date, effective_end_date) these are two fields that appear on many HRMS entities. They're used to store dated history over time. For example:
14-Jan-2009 to 19-Apr-2009 - Pam Stephens
20-Apr-2009 to date - Pam Erickson
In this example Pam got married on the 20th April 2009 and changed her surname from Stephens to Erickson. Here the history of changes are kept so that if we date-track to any time prior to the 20th April 2009 we'll see Pam Stephens and if we date-track on or after the 20th April 2009 we'll see Pam Erickson.
Check out the following Oracle Support article for more information:
How Date Track Works [ID 177733.1]

What would the ideal LR data BU workflow with Mac??

Similar Messages

Maybe you are looking for