What would you do to extend WiFi network?

I have a new Motorola dsl modem/wireless router...replaced after a lightning strike. I have a Time Capsule and Airport Express. They can join the network, but not extend the network which is something that must happen in my home. Would you (anyone) disable the wireless setup in the Motorola and use the Time Capsule as the main base station, then using one or more airport expresses as the extenders OR install a Linksys range expander and use the time capsule and airport express for print servers, Xbox gaming etc?
My goal is to extend the range of my wireless in the most sensible way and apparently I can't use what I have.

Hello GoIndianapolisColts. Welcome to the Apple Discussions!
Would you (anyone) disable the wireless setup in the Motorola and use the Time Capsule as the main base station, then using one or more airport expresses as the extenders OR install a Linksys range expander and use the time capsule and airport express for print servers, Xbox gaming etc?
If you don't already have the Linksys Range Extender, I would suggest going with the first option that you bring up.
In this scenario, you would do the following:
o Disable the wireless radio on the Motorola Gateway (combination modem/router) but leave its primary router functions (NAT & DHCP) enabled.
o Connect the Time Capsule (TC) directly to the Motorola Gateway by Ethernet.
o Reconfigure the TC as a bridge. This will allow the Motorola to provide the NAT & DHCP services for the entire network so that wired or wireless clients connected to any of the routers will get Internet access.
o Reconfigure the TC and AirPort Express Base Station (AX) into a "dynamic" WDS. (Note: I am assuming that your AX is the newer 802.11n version.
In this overall configuration, both the TC & AX retain their functionality for providing an extended wireless network, as well as, provide for the sharing of hard drives and/or printers to the network clients.

Similar Messages

Have timecapsule & 2 express and want an extended wifi network

Have these 3 devices but couldnt make them work, tried to set extended wifi network, first assigning timecapsule wired from fiber modem and then setting both express as extended thru wifi...but these two not working...
I ve read that express should be located to base (timecapsule in this case) and cannot link all as chain, is that correct?
How can I set a set of express devices working as wifi amplifiers ???
Thank you in advance

Apple's "extend a wireless network" feature works like the hub and spokes of a wheel.
The Time Capsule would be your 'hub". One AirPort Express would be at the end of a "spoke", since it must communicate directly to the "hub".
You could have a second (or third, or fourth) Airport Express at the end of other "spokes", but each Express must communicate directly to the "hub".
AirPort Express devices at the ends of the "spokes" cannot communicate to other AirPort Express devices at the ends of other "spokes".
Another way of saying the same thing is that although you can have multiple extenders, you can only extend the wireless signal one time, not two times. The devices can not be linked as a chain.
We assume that both of your AirPort Express devices are 802.11n models. Is that correct?
We also need to know what version of AirPort Utility that you are using in order to provide more tips. If you are not sure, open AirPort Utility, click on the AirPort Utility menu in the upper left corner of the screen, and then click About AirPort Utility. Please post back with the version number that you see there.

If you traded in your mac mini for a windows pc, what would you get?

I have a late 2009 Mac Mini and am just chafing to upgrade. It's slow as molasses. But at the same time, I'm not willing to pay full price for 2012 model, and Apple is way behind in releasing an update. In fact I'm hearing speculation that Apple may be just discontinuing the Mac Mini.
I don't know... But I'm getting tired of waiting. And getting a different model of Mac doens't work for me, because I want to use my own screens. (I'm running two large screens in "portrait" mode.)
Also, I have a Windows 7 PC at work, and I've come to realize that I don't mind Windows 7 and don't see it as intrinsically better than the Apple OS. In fact Windows & has generally been mariginally more stable, and a lot faster then the OS on my Mac. In fact I got both systems around the same time and the Windows 7 system did better with less RAM and is "aging" better.
HOWEVER, what I really love about the Mac Mini is how QUIET it is. I have it in my bedroom, next to my bed, and it's noise is barely noticeable. So I guess I should look into seeing if there area any desktop PC's that are as quiet.
Have you considered switching back to a PC, and if you did what would you get?

I moved away from Apple in 2007 and have never looked back !
I use the ASRock Vision X 420D http://www.asrock.com/nettop/Intel/VisionX%20Series%20(Haswell)/
Its the same size as the current Mini but a bit taller - BUT it is FULLY user upgradeable and about the same price once you make a mini upto the same spec.
I run Windows 8.1 on it and love it - yes there are lots of people bleating on about the 'metro' style of Win 8 but if you configure it (which has been a feature from launch, not a 3rd party hack) you never have to see the metro interface and you have a standard desktop.
As to woodmeister50 comment of : Also, with Win8, many third party add on companies have dropped support etc. is that not the same for Mavericks ?!
Custom mini
ASRock Vision X 420D, 16Gb Ram, 3x 512Gb SSD, AMD Radeon R270X, WiFi (n, ac)

What would you do if you are a programmer and have an ipad 2 ?

The question is clear I think;
What would you do if you are a programmer and have ipad 2
You can read programming books( pdf-s etc. )
Search a topic/code/something without sitting infront of any computer( 3G-wifi )
You can try/test your apps that you developed with ObjectiveC, html5 etc.
Just tell me your things, I think this article will be a "guide" for - programmers which have ipad
-Regards,
Orkan

Hello Dave,
Thank you very much for your reply. I tried to edit my question, but I think( or I can't find ) there is no post editing feature on this forum. Anyway; I'm a software developer and I don't know very well apple's platforms.
I used an ipod and now I'm using an ipad 2 - But I'm a .net( C# ) developer. [ and I hate object-c ]
I bought this ipad 2 because I want to view my pdf files all the time.
Besides that, What can I do with this ipad 2 as a sofware developer?
-Viewing computer/programming magazines with itunesU etc.
-Surfing webpages which are related on programming,
and then what ?
I want to explore the possibilities what can I do more with an ipad 2! ( based on programming )
An example: I discovered today;
There is a nice app ide which is working on ipad 2 > http://twolivesleft.com/Codea/
We (ms users) didn't see any ide like that before... This is different and nice to learn.
I'm asking these kind of possibilities...

OT? What would you do?

I redid a site from asp to php. Part of that site includes a page that parses weather data and uploads it to the unix server to display current weather conditions. Since moving it to a unix server, the degree symbol now is a ?. The other data are fine.
The parsing is done by a third party software that works with the hardware mfg of the weather station. It takes something like say:
and turns it into:
I have talked with the software IT person and he claims the hosting company is using a different ascii set than normal for the degree symbol, providing a link to http://www.asciitable.com/ ,
I have talked with the hosting company (Network Solutions) and they say "I apologize that we’re unable to directly support or troubleshoot custom scripting on your website.   I recommend consulting with the software developer or site that provided the code to you to correct the display issue."
So I'm pretty much stuck in the middle here. The site's page gets a lot of attention as the weather station is on a bluff overlooking Lake Michigan and gets some unusual readings compared to in the city. It's used by both the National Weather Service and two large television stations in the state so I'd like it to be fixed if possible. The data readings are fine, but the ? is distracting.
So I'm curious, what would you do in this situation?

haha - most likey #2, to be sure.
Here's the code at the top. Tell me where to try inserting it:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<link rel="shortcut icon" type="image/x-icon" href="images/favicon.ico">
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />

<title>Spyglass Weather Station at Holland State Park</title>
<meta name="description" content="Webcam and weather station of Holland Channel on Lake Michigan. View from Spyglass Condos of pier. See lake activity, weather, boating and swimming conditions at Holland State Park. Get the latest weather including wind direction, wind speed and air temperature.">
    <meta name="keywords" content="webcam, Holland Channel, Spyglass Condos, Lake Michigan, swim, boat, beach, Holland State Park">
    <meta name="copyright" content="2011">
    <meta name="Distribution" content="Global">
    <meta name="Rating" content="General">
    <meta name="Robots" content="INDEX,FOLLOW">
    <meta name="Revisit-after" content="1 Day">

<link href="CSS/SGC_NEW.css" rel="stylesheet" type="text/css" />

<script src="../js/jquery-1.2.6.pack.js" type="text/javascript"></script>
    <script src="../js/jquery.innerfade.js" type="text/javascript"></script>
    <script src="../js/scripts.js" type="text/javascript"></script>

<script type="text/javascript" src="CSSMenuWriter/cssmw/menu.js"></script>
<style type="text/css" media="all">

</style>



</head>

What would you do with Intel iMacs with WM97/Thus-T in Word ?

In a school in Marin County there are 20 Intel iMacs running 10.4.11 (512 MB RAM) all networked and running fine. Several students reported a Macro warning notice when launching a Word (Mac 2004 Student edition) document (.doc).    Have looked over the current available anti-viral programs running under 10.4.11 and submitted several files to three different websites which analyze the file against 20 or more virus detectors. Most sites and local apps found the WM97/Thus-T virus in all the offending files.   The only free application which cured the files, rather than quarantining them or deleting them, and ran with 10.4.11 was Sophos.   Sampled only one of the iMacs with a full Sophos scan of the User folder, and it found 47 "WM97/Thus-T" infected files, and cured all of them. Repeat scan of Home folder ----> no threats found.   Some of these infected Word files go back three years, and the machines are running fine.
The students are not supposed to bring files from home, nor are they supposed to take files home. There are a few PC towers and PC laptops on site, all with anti-viral software. The students do not currently e-mail this files nor receive e-mailed files. For fun, I tried e-mailing one of the infected files to myself, and aol and gmail both blocked the transmission.
QUESTION:   What would you now do ? It doesn't seem this WM97/Thus-T is a threat to Macs. Would you feel compelled or it's mandatory to run Sophos on all the Macs on site ?
What about liability ?   If one of these infected Word files found its way on a Windows PC would the school be liable ?   What is the worst case scenario of this virus on the Mac platform ?    On the Windows platform ?
MICROSOFT: http://www.microsoft.com/security/portal/Threat/Encyclopedia/Entry.aspx?Name=Vir us%3aW97M%2fThus.FP
WEB SCANS: http://r.virscan.org     http://www.virustotal.com
Thank you for your time and help.

No viruses that can attack OS X have so far been detected 'in the wild', i.e. in anything other than laboratory conditions.
It is possible, however, to pass on a Windows virus to another Windows user, for example through an email attachment. To prevent this all you need is the free anti-virus utility ClamXav, which you can download from:
For Tiger: http://www.clamxav.com/download.php#tiger
and for Leopard, Snow Leopard and Lion from here: http://www.clamxav.com/

One Accesspoint and two server...what would you suggest?

Hello!
I'm developing an application which handles two wireless barcodereaders. There are two computers, and one of them is connected with the accesspoint.
The communication to and from the accesspoint is managed with an COM Component, which is used from Java.
The barcodescanners should interact with my application , for excample if the salesman scanns a customer-ticket, the customers data should be displayed on the screen. The barcodereaders can be identified with an uniqu id, so it's no problem to know where the data came from.
But my problem is...I'm getting all of the events to the computer which is connected with the accesspoint....
How do I tell the other computer to display the customers data which have been scanned with the other barcodereader?
How can I get the event handled on the other computer???
Sockets would be a possible way, but I think that might get very complex - than i thought i could call with RMI a fireEvent Method on the 2nd computer...!?!
What would you do to solve this problem?
I'd be happy for your help!
Greetings Martin G.

Nobody out there who knows how to solve this problem?
My main problem is how to get events which occure on on computer handled on the other computer!?!
I'd be very happy for your help
Greetings Martin G.

I have read up on all about crashes and i cant even open it in safe mode :( i have tried deleting it and reinstalling it but the problem still persists. What would you suggest i do and is there any way i canget hold of firefox 6 for mac?

i have read up on all about crashes and i cant even open it in safe mode :( i have tried deleting it and reinstalling it but the problem still persists. What would you suggest i do and is there any way i canget hold of firefox 6 for mac?

Does the regular Firefox 8 release version work or does the version crash as well?
*Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html
Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

I have a great number of Hi8 video tapes and I would like to burn them onto CDs through MacBook Pro (ME665LL/A), but I do not know how to transfer those footage into Mac. What would you recommend?

Hello everybody! My question is; my parents and I have a great number of video tapes (Hi8 and mini DV) and since I purchased a MacBook Pro (ME665LL/A) I would like to burn them onto CDs, but I do not know how to transfer those footage into Mac. What would you recommend(it can be a software, a hardware or combination of both)? By the way, I also purchased an external DVD-RW(Asus SDRW-08D2S) separately.

Just Google "convert hi8 to dvd" and you'll find a number of software/hardware combinations that will allow you to do what you want. One important piece of the puzzle is whether or not you still have access to the video recorder(s) that the movies were shot on.
Good luck,
Clinton

I have a 2009 13"MacBook pro running on OS X 10.6.8. How do I know whether this is leopard or mountain? What would you advise that I use as I need to be running OS X 10.7? All help appreciated. Thank you.

I have a 2009 13"MacBook pro running on OS X 10.6.8.
How do I know whether this is leopard or mountain?
What would you advise that I use as I need to be running OS X 10.7?
Also can you advise how I upgrade please?
All help appreciated. Thank you.

Thank you for your response Niel.
I do run Microsoft Office 2011 - will Snow Leopard support this?
Finally why snow leopard and not mountain lion?

What would you replace an ATI Radeon 9800 Pro (256MB) with?

Hi,
I started a thread before asking whether I could replace a 256MB card with a 128MB card, even though the interface was a different shape.
But, as I know so little about Macs and graphics card, it seems wiser to ask
What would you replace an ATI Radeon 9800 Pro (256MB) with?
The computer is user for photo editing and normal internet/email use. The photo editing is done on Adobe Photoshop for professional treatment of photographs.
The computer is a Power Mac G5 (1.6GHz) and budge is £80 / $120.
Thanks in advance, Franc.

Hi-
Please check my recommendations in your other thread.
Better options for the 9800 Pro are the Radeon 9800 XT, Geforce 6800 GT, Geforce 6800 Ultra, or if one has the money or finds a good deal, a Radeon X800 XT.
For your budget and uses, the Geforce cards are a performance value buy.
BTW, I have owned all of the cards, used all of the cards, and tested all of the cards.
Graphics Cards- ATI and Nvidia
See my testing pages starting here:
Page 1: Open GL

"Do you want to allow the following program from an unknown publisher to make changes to this computer?" I mean....what would you do? Is it safe to click yes....(Don Don Don...*sound effect*)..please help...

Okay everybody...so I'm on the struggle bus so I'm going from Photoshop cs6 off my old broken laptop to trying to dwn Photoshop Cs2...either way I love PS. Now when I tried downloading it for free from Adobe...succeeded...but when I went to the download folder to install it, it said "Do you want to allow the following program from an unknown publisher to make changes to this computer?" I mean....what would you do? Is it safe to click yes....(Don Don Don...*sound effect*)..please help...

If you already have a license for photoshop cs6, why do you want photoshop cs2?
You can just install photoshop cs6 on your new computer provided both operating systems are the same kind (both mac or both windows)
If you don't have an install dvd for cs6, you can download photoshop cs6 from here and use your serial:
http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

CS4 and consistent crashing...what would you advise?

Hi,
I have recently installed Windows 7 32 bit and have been suffering significant crashing and instability with Premiere Pro CS4.
These issues occur consistently with 1 to 20 minutes of using the software...usually every 2-7 minutes.
Sometimes I receive the message: "The system is running very low on system memory"...followed by a crash some minutes later.
Sometimes I don't receive a message at all...Premiere Pro just instantly stops....sometimes a message.."Premiere Pro has encountered an error."
I previously used Premiere Pro CS2 on this same computer but with a Windows XP install...this worked very well and was stable (SD editing not HD)
I have tried a range of "fixes" but the problem still continues...
it seems to crash no matter what footage I use..or what I am doing.
Fixes tried:
Defrag of all HD's
Placing Scratch disks etc. on different drives.
Turning off virus protection.
Tweaking of memory settings
Updating to latest graphics driver available.
Freeing up hard drive space
Running CS4 in Comptibility mode for Win XP Pro sp3
In summary Premiere Pro CS4 is very unstable on my system and I don't know what to do.
My current system is:
Premiere Pro CS 4 version 4.2.1
Microsoft Windows 7 Home Premium
Version    6.1.7600 Build 7600
System Model    P5K-E
Processor    Intel(R) Core(TM)2 Quad CPU    Q6600 @ 2.40GHz, 2394 Mhz, 4 Core(s), 4 Logical Processor(s)
Installed Physical Memory (RAM)    4.00 GB
Total Physical Memory    3.25 GB
Available Physical Memory    1.79 GB
Total Virtual Memory    6.50 GB
Graphics: NVIDIA 8800GT
Hard Drives: (all 7200 RPM)
Local Disk C: 1.81 TB (650GB Free)
Disk E: 698 GB (34.4 GB Free)
Disk F: 931 GB (41.5 GB free)
Options I can think of:
1.) Format drive C and install Windows 7 64 Bit..reinstall just Premiere Pro and key drivers.
2.) Upgrade to CS5 and give up on Cs4.
3.) Build another computer and give up on my old system.
4.) Format drive and return to Windows XP Professional
5.) Install Premiere Pro CS2 again and give up on CS4.
Any other clues?
What would you do?
Which of these options should I try?
Any advice greatly appreciated.

When one is having resource issues, I would look at these articles in about this order, to work through the potential issues.
First, I would make sure to have updated both the audio and video drivers from the mfgr's. Web site.
This ARTICLE gives tips on setting up one's computer for an editing session. For Win7, please see Black Viper's link, down-thread for tune-up tips.
Next, this ARTICLE gives some tips on Windows Virtual Memory.
This ARTICLE talks about one utility, that can really get in the way.
This ARTICLE, from the PrPro-Wiki, has some trouble-shooting tips.
This ARTICLE will give you tips on finding clues as to what is happening, when the program hangs, or crashes.
If one is still not getting to the bottom of the crashes, then see The Case of the Unexplained. Note: this is a new link, as MS moved some things about.
Last, if hardware problems are suspected, say with a BSOD, then this ARTICLE offers some tools to track hardware issues. There are other great tools in Harm's list.
Good luck,
Hunt

What would you most like to see in a future version?

I'm pretty sure the DSC development team looks at these posts so what would you most like to see in the future? For me, I'd like to be able to dynamically add tags without shutting down the engine.
Regards,
Robert

In "context help". No more "no description available". At least give me the data type.
PaulG.
"I enjoy talking to you. Your mind appeals to me. It resembles my own mind except that you happen to be insane." -- George Orwell

What would you advise....

Upgrade time is here and I have been lurking on this forum watching for issues etc with the N97
Firstly, would you advise against me getting the phone? If so, what would you advise I replace my N95 8gb with?
Secondly, assuming the geek in me wins the argument and I get the N97, I was thinking the first thing to do would be a hard reset to get rid of the unwanted software and then an upgrade to the V11 firmware. Is this correct?
Cheers in advance
PP

There is a lot of confusion about this unwanted software issue on the N97. There is essentially 3 types of storage on the device:
The most obvious is the 32Gig of flash.. this is treated a bit like a USB disk.. Nokia don't put much on there and in some cases installing certain applications to this drive is not possbile. Further to this, when you use the phone in USB storage mode, the "drive" is disconnected from the phone and attached to the PC.. this means the phone has to close any applications that are running on the "e:" and looses its ability to read/write from there. This is a serious problem if you store your message repository on the e: as the phone will revert back to C: and you *may* loose all your messages
Then there is the z:. This is the ROM. and it is just that.. read-only.. If an application is installed there, you won't be able to remove it.. this goes for Quick Office and that boingo thing.. both are terrible apps.. You won't gain anything by removing them BUT there's the problem.. The boingo app is running all the time using RAM in the phone.. Since you can't disable it, it uses RAM rather than storage..
Lastly there's the c:.. this is flash that is always available to the phone. It is where your contacts, message, config, internet/browser cache and most things are stored by default. A bit like c:\windows on a PC.. So, Nokia in their infinite wisdom made it 70meg or so.. Brilliant.. I cannot stress how mind-blowing stupid that decision is and how it continues to ruin everyone's lives.
Many applications are installed on the c: by default. Why? because the 32Gig e: is not always available (see above about USB storage mode). When I transfered all my messages from my previous handset (using the sync thing) I was left with less than 5meg free..
This problem is NEVER going to be fixed.. there simply isn't enough storage on the phone to do this..
This is not the same as the low RAM problem.. the fact that, for example, you receive a text message or email with a hyper-link. you click open.. the web browser opens.. the phone runs out of memory and closes the messages app.. so now when you close the browser, the message app is also closed.. **bleep**?!?!?!?!?!?!
Nokia never fix their products.. ever.. anyone who claims they do is lying! Ok, that's harsh.. but..
In my experience (and I've owned many first gen Nokia products (7110, 7650, 770, 7710, 5800, N97) when Nokia sell a broken product, particularly if it is broken by design, they may release firmware fixes that update SOME stuff.. but they'll never fix most of them.. Instead they'll wait a few months and release a new product that doesn't suffer the same problems..
You'd think the N97 was fixing the problems with the 5800.. but the N97 is a very different beast.. It runs a different not entirely compatible version of S60.. They must know it was flawed from the start, though.. they introduced a Low memory set of features into S60 especially for N97.. Riiiight, Nokia.. you spent time and effort developing a way to handle low memory that actually isn't that good rather than just doubling the RAM in the phone.. how much is a 1Gig dimm these days?
This phone is terribly beta.. Even after v11 has been released it has a truely inconsistent look and feel.. You could get an N97, or you could wait for this fabled n97-mini there's recently been talk of.. or you could opt for a vendor that is trying to compete with Nokia in the smart phone market and so is actually making an effort to produce a phone that doesn't make their quality-assurance department look like kinder-garten nap time..
I've been disappointed with Nokia products before.. but NEVER so much as with the N97.. And in todays market are you going to pick a poor product in the hope that software may fix it later (bearing in mind it took over 3 weeks for Nokia to release the v11 firmware to all the phone versions.. that's right there are 100s of different versions of the N97) or are you going to opt for something the industry already accepts as a stable handset..
It's a shame.. I want to love it.. I've loved Symbian since its EPOC days.. but this phone is terrible in every aspect..
Quick office and Boingo.. that's a bit like bundling AOL and compuserv CD's with windows 95.. It feels that old!

What would you do to extend WiFi network?

Similar Messages

Maybe you are looking for