What You Hear and the X

I cannot stop what I hear from going through my Micon Ventrilo. We use Ventrilo to game with and everything I hear in the game is played through my Mic when I hit my push to talk key.
Please help

KeithMac,
Open up the (Surround) Mixer, and set your recording source, the red slider, to <EM>Microphone</EM>. It sounds like it's currently set to <EM>What U Hear.</EM>
<EM></EM>
Cat

Similar Messages

  • Creative X-Fi recorder from "what you hear" and splitting tra

    Hi,
    I used to be able to record minutes of music or sound and be able to split this saved file with the splitting option of Smart Recorder. I now have installed a new sound card X-Fi and want to do the same but cannot find where I need to look. Does this new software for X-Fi offer that or not anymore?
    thanks,
    Luke

    I have the software from the CD installed, as I stated earlier, the "What You Hear" option is only missing if you do a CLEAN install of the drivers from the Windows Update. That is?to say if you install the drivers from Microsoft's website with no other X-Fi driver installed on your system.
    If you installed the update over a previous version of the drivers, then the "What You Hear" option remains available.
    I checked this three times by doing a clean install from the Windows Update and then installing the other driver from Creative?s website.
    All three times I deleted the X-Fi driver from my system, then installed the one directly from the Windows Update. I would check my record settings and could not find the "What You Hear" option. I would then install the driver from Creative?s website and checked the settings again and the ?What You Hear? option was available.
    If you just installed the Windows Update driver over the one previously on your system without first deleting it, then yes, you should have the "What You Hear" option.
    I also could not get the "What You Hear" recording option in any software application that previously had it (ie, Adobe Audition, Sony Sound Forge) until I installed the driver form the Creative website.
    Message Edited by SGV on 04-07-200708:56 PM

  • Recording what you hear on the comp

    Well I got cubase but everytime i export the song the sounds are all different and ultimately the song sounds completely different then it was on the program, and even if i figured out how to fix this, i still have the problem of converting it a different format. So, instead of doing the two i was hoping to see if there is any way i can record what i hear on the computer. I tried and i didnt find a way and hoping someone here could guide me... i got an Audigy 2 Value and Windows XP if that is of any help. It be very appreciated if someone could help me. Thanks

    which version of cubase are you using? as i dont use the home pakages im not 100% on if evertythings the same but im sure this will be! what export function are you using? and what is the input channel selected recording in the computers audio devices! if you select the input as waves that might help the "what you hear" recording outside of cubase.
    use said you are using only midi files i agree with jutapa about using the vsti's if you read the cubase manual you will find that it mentions something about not being about to mixdown outside midi functions with out syncing the device cubase or something along those lines!
    i didn't pay all that much attention as it's never been a problem for me!
    here the part of the manual on mix down
    The Export Audio Mixdown function in Cubase SX/SL allows you to mix
    down audio from the program to a file on your hard disk, in a number of
    formats. You can choose to mix down one of the following:
    An output bus.
    For example, if you have set up a stereo mix with tracks routed to a stereo output bus,
    mixing down that output bus would give you a mixdown file containing the whole mix.
    Similarly, you can mix down a complete surround bus, either to a single multi-channel
    file (interleaved) or to one file per surround channel (split).
    The channel for an audio track (Cubase SX only).
    This will mix down the channel for the track, complete with insert effects, EQ, etc. This
    can be useful for turning a number of events into a single file, or if you are using CPUintensive
    insert effects – by exporting the track and re-importing it into the project you
    can turn off the insert effect, saving processor power.
    Any kind of audio channel in the mixer (Cubase SX only).
    This includes VST Instrument channels, effect return channels (FX Channel tracks),
    Group channels and ReWire channels. There are many uses for this – for example, you
    can mix down an effect return track or turn individual ReWire channels into audio files.
    Notes
    The Export Audio Mixdown function mixes down the area between the
    left and right locator.
    When you mix down, you get what you hear – mutes, mixer settings
    and insert effects are taken into account.
    Note though that you will only include the sound of the bus or channel you select for
    mixdown.
    here's the bit okay seems you can't record midi in the mix down at all you have to record it like a normal audio file first. that's just with the record button on to a normal audio track you'll have to figure out how to get your midi to feed through into cubase
    the way i do it is only leave the information out to the midi device plugged in and then plug the analog out put of the device into the input that cubase will record this will make sure cubase records the file as an audio file with out getting a cross over of the midi information being sent(i hope that makes sence some times i can make a muddle of explaining things). there are other ways to do this but this ways nice and simple and lazy! and works just aswell as any other.
    MIDI tracks are not included in the mixdown!
    To make a complete mixdown containing both MIDI and audio, you first need to record
    all your MIDI music to audio tracks (by connecting the outputs of your MIDI instruments
    to your audio inputs and recording, as with any other sound source).
    With Cubase SX, you can also export selected tracks – this is a different
    function that doesn’t create an audio mixdown.
    Rather, this is a way to transfer complete tracks (including clips and events) from one
    project to another
    i left everything else in just in case you wanted to check through it!
    1. Set up the left and right locator to encompass the area that you want
    to mix down.
    2. Set up your tracks, so that they play back the way you want.
    This includes muting unwanted tracks or parts, making manual mixer settings and/or
    activating the R (Read) automation buttons for some or all mixer channels.
    3. Pull down the File menu and select “Audio Mixdown…” from the
    Export submenu.
    The Export Audio Mixdown dialog appears.
    The upper half of this dialog is a standard file dialog, while the lower
    half contains file format options and settings for the mixdown function.
    Note that the available settings and options differ depending on the
    selected file format
    Select the bus or channel you want to mix down with the Outputs popup
    menu (with Cubase SL you can only export busses, not channels).
    This lists all output busses and channels in the active project.
    5. Select the channel configuration for the mixdown file with the
    Channels pop-up menu.
    Typically you would select the same channel configuration as the bus or channel you’re
    mixing down, but it’s also possible to e.g. mix down a stereo bus to a mono file. In this
    case a warning will appear, asking if that’s what you want to do.
    Here you will also find the “N. Chan. Split” and “N. Chan. Interleaved” options – these
    allow you to create a surround mixdown file, either as one mono file per surround channel
    – split – or as a single multi-channel file – interleaved (Cubase SX only).
    The Channels pop-up and the “N. Chan” options are only available when
    an uncompressed file format is selected (AIFF, uncompressed Wave,
    Wave64 or Broadcast Wave).
    For the other formats you can select stereo or mono using controls that are specific to
    each format. When mixing down to 5.1 Surround, you also have the option to mix down
    to Windows Media Audio Pro (Windows and Cubase SX only) – see page 670.
    6. Select a file format with the File type pop-up menu.
    7. Make additional settings for the file to be created.
    This includes selecting sample rate, resolution, quality, etc. The available options depend
    on the selected file format – see page 660.
    8. If you want to automatically import the resulting audio file back into
    Cubase SX/SL, activate the “Import to” checkboxes.
    If you activate the “Pool” checkbox, a clip referring to the file will appear in the Pool.
    Activating the “Audio Track” checkbox as well will create an audio event that plays the
    clip, and place it on a new audio track, starting at the left locator.
    The Import options are only available if you have selected an uncompressed
    file format (AIFF, uncompressed Wave, Wave64 or Broadcast
    Wave files).
    9. If you activate Real-Time Export, the export will happen in real time, i.e.
    the process will take the same time as regular playback.
    Some VST plug-ins require this to have time to update correctly during the mixdown –
    consult the plug-in manufacturers if uncertain.
    CUBASE SX/SL
    Export Audio Mixdown 27 – 659
    When Real-Time Export is activated, the exported audio will be played
    back on the Audition bus.
    The fader below the Real-Time Export checkbox allows you to adjust the volume of the
    Audition bus.
    10.If you activate Update Display, the meters will be updated during the
    export process.
    This allows you to check for clipping, for example.
    11.Select a folder and a name for the audio file to be created.
    With some file formats you can create split stereo files (see page 661).
    This will create two files (one for each side) with the same name, but
    with the letter “L” appended for the left channel file and “R” for the right
    channel file.
    In the same way, split multi-channel (surround) files (Cubase SX only) will have the
    same name followed by a number indicating the surround channel.
    12.Click Save.Depending on the file format, an additional dialog may appear.For example, when exporting to MP3 format a dialog appears where you can add infoabout the song title, artist, etc. Make the desired
    settings and click OK to proceed.A dialog with a progress bar is displayed while the audio file is created.If you change your mind during the file creation, you can click theAbort button to abort the operation.if you
    have activated any of the “Import to” options, the file will be importedback into the project.When playing back the re-imported file in Cubase SX/SL, remember to mute the originaltracks so that you really hear the true result.
    hope thast helps

  • What u hear and microphone at the same ti

    Hey,
    I am planning on broadcasting some video and audio with my commentary online, but can't seem to find a solution to my problem.
    In order to do it'sI need to talk and send out the audio from my computer. But it is impossible since I can't choose "What U hear" and microphone under sound options in vista at the same time.
    Anyone knows how to fix it's
    I have a X-fi Xtrememusic.
    Thanks

    The new X-Fi cards have both What U Hear and the microphone enabled at the same time. It makes for a good card to stream with if you have a decent mic.
    If Mike knew anything he would also know that for streaming you need both What U Hear..and the mic enabled at the same time so you can stream though What U hear and use the mic without switching back and forth.
    The older cards do NOT have this feature making it very difficult to stream music while having the microphone function correctly.
    Message Edited by chevell on 04-06-2008 11:15 PM

  • "What you hear" recording volume is too

    I have Soundblaster Audigy 2 on Vista 64-bit. I recently downloaded new drivers (6.0..242). This is after converting from XP and old drivers.
    My "What you hear" settings work and will record using MediaSource Player, but the volume on the recorded file is about 25% the volume of the original file. This is verified upon replaying both the original and newly-recorded files side-by-side or right after one another.
    When opening the Sound Panel>Recording Devices>"What You Hear">Levels, the levels are to the max and the balance is to the max for both right and left channels.
    Although probably irrelevent, under Sound Panel>Playback Devices>Speakers>Levels, play control levels are max, and all other sublevels are?maxed, balanced maxed, and unmuted. (Sorry for my lack of technical description.)
    I play the file on Windows Media Player and volume is maxed on the player as well. The interesting thing is when you look in the Sound Panel, the speakers show maxed volume and the "What you hear" only shows, again 25% of the volume.
    Previously, I had no problems with XP and old drivers. I also was once able to revert to old drivers (which I can no longer do) and the problem went away. The difference was that the old drivers had a "Wav" level setting (under Sound Panel>Playback Devices>Speakers>Levels) where you could increase the level. These drivers don't appear to provide this setting.
    Is there some setting I'm missing? Any help would be great. Thanks!

    Jamrock wrote:
    Where abouts is this located? I can only see "Microphone, Line in, CD Player, Video, AUX, Stereo Mix, Mono Mix"
    Which card/software you got there?
    If you use "Creative Surround Mixer" --> you can set the .REC source by pressing the icon located above recording level slider.
    If you can't see the "W-U-H" option listed there, then check if it's already selected (ear icon).
    jutapa

  • Stereomix/What you hear?

    ? <div class="lia-component-body lia-message-body">hi everybody.
    Lately I've been introduced to streaming games to friends online.
    Well,I'd like to stream game audio and microphone input.
    Since my X-Fi XtremeGamer doesn't have Stereomix I tried the "What you hear" option,but I'm not content with that solution.
    It's kind of distracting for me to hear myself saying what I just said a second ago, so I'd like to know if there is a way to turn that off or low, without losing the ability to stream either microphone or game audio.
    So what I'm looking for is a combination of "What you hear" for the game audio and regular microphone output, all in audio channel.
    Is there a way to do it's Did I miss an option for it somewhere?
    Or is there an additional program I need to mix those channels?
    I'm on Windows Vista by the way.

    bump~

  • Record what you hear

    I have a Pavillion DV8-1250EA 4 GB RAM 2x320 GB Discs which has an IDT HD Audio device and uses the Windows 7 64-bit operating system.
    I want to knwo how to record audio internally (e.g. audio played from the Internet).
    I am able to do this on my desktop which has a Soundblaster Audigy 2 ZS Platinum Pro card and runs Windows XP Professional 32-bit by recording "What You Hear".
    It seems just a little bit of an oversight to have omitted this functionality on such a powerful and feature-packed system designed for multi-media. 

    I do run Audacity and I have tried to use this to record "What You Hear" on the HP Laptop. The only recording device shown in Audacity is Master. If I try to use this to record, it only picks up inputs from the inbuilt microphone and the externl microphone, if attached. Any sound coming out of the speakers is picked up by the inbuilt microphone and can be recorded in this way but that is, obviously, not satisfactory.
    Another method would be to cable the earphone output to the external microphone input and disable or mute the built-in microphone. Again, this is hardly satisfactory.
    I would have expected the audio detected internally to be available for recording, which it is not because I do not believe the IDT HD drivers present it.
    In desperation, I have contacted IDT directly.
    This is the sort of thing I have taken for granted, having had an excellent sound system on my desktop for years. It seems that Soundblaster takes some beating, both in terms of quality and technology. Perhaps HP would do well to consider this.

  • How does "what you hear" work with my surround 5.1 externa

    Hi,
    I am using a usb soundblaster surround 5. external soundcard and recording lp's through the line-in socket of it. I am confused about the setting "what you hear" as opposed the "line-in" setting;
    I thought that the purpose of "what you hear" is that you are recording what you hear, i.e. with the altered sound of the graphic eq, eax, cmss 3d etc, but this seems not to be the case as the sound is the same on line-in as it is on what you hear. I want to be able to alter the sound quality/tone and in particular, the width of the stereo, i.e. make it wider, and can't seem to with this system. Shouldn't I be able to change the tonal quality and it be reflected in the recording if I am using "what you hear" as the input ?
    Any help on this would be appreciated.
    Thanks.
    P.S. Does anyone know of a software that can slightly alter the stereo i.e. make it wider, given the fact that I would be recording in 24 bit 96k of the soundblaster ? I have audio cleaning lab, and although it works, I think I need a better software for my needs, as the sound quality is very important to me.
    Thanks very much in advance.
    audio-fi

    audio-fi wrote:
    Hi,
    I am using a usb soundblaster surround 5. external soundcard and recording lp's through the line-in socket of it. I am confused about the setting "what you hear" as opposed the "line-in" setting;
    I thought that the purpose of "what you hear" is that you are recording what you hear, i.e. with the altered sound of the graphic eq, eax, cmss 3d etc, but this seems not to be the case as the sound is the same on line-in as it is on what you hear. I want to be able to alter the sound quality/tone and in particular, the width of the stereo, i.e. make it wider, and can't seem to with this system. Shouldn't I be able to change the tonal quality and it be reflected in the recording if I am using "what you hear" as the input ?
    Any help on this would be appreciated.
    Thanks.
    P.S. Does anyone know of a software that can slightly alter the stereo i.e. make it wider, given the fact that I would be recording in 24 bit 96k of the soundblaster ? I have audio cleaning lab, and although it works, I think I need a better software for my needs, as the sound quality is very important to me.
    Thanks very much in advance.
    audio-fi
    I just don't understand the bolted part after reading your post .
    By keeping the recording untouched gives you the best possible quality. If you then want to "play" with effects as like spreading the stereo image, then do it on-the-fly rather than 'hard-code' into recorded audio data.
    How to-do this while playing ... just use some audio/media software which supports addons (effects).
    I could recommend you some players like
    Winamp + VSTHost plug-in, MediaMonkey + VSTHost plug-in, Foobar + VSThost plug-in, Steinberg MYMP3PRO, WMP + some plug-ins (though, I don't know if there are this type as you would like of), etc. (there are couple more).
    VST/DX EFFECTS plug-ins can be found from KVR - http://www.kvraudio.com/get.php
    24-bit/96kHz would give you the best quality but, as you have an external Soundblaster there ... IMO, just use nati've samplerate then (AFAIK, it's 6-bit/48kHz) and if you don't want to use 48kHz wav/mp3 format then just convert Wave files 48->44. using Voxengo r8brain Free and then transfer to mp3 or wma if needed.
    For quality sake I would recommend you to get least E-MU 0202 USB.
    jutapa
    Message Edited by jutapa on 03-2-2008 07:40 PM

  • Need 'What You Hear' recording option for Notebook(Vista)-Does Xi-Fi for Notebooks provide th

    Hi,
    I have an Audigy sound card on a Dell desktop and it has the "What You Hear" recording option within Vista. I need the same option for my Dell Notebook, unfortuntately, this notebook uses a Sigmatel card within the motherboard. What device or application to i need to buy in order to get the "What you Hear" recording option to be available?
    What am i attempting to do?I often record li've webcasts in which the video portion comes through a Li've Meeting or Lotus Same time application using a Screen Recording Application?BUT the Audio comes from a conference which i use a VoIP software to dial into. I need to be able to record the sound that's been generated through my computer as an internal source. I need to be able to select 'What You Hear' as the default recording device so that the screen recording application i use can also record the audio been played through the PC?Appreciate any help here. Thanks?Kevin

    If it'sis not a Creative card, "what u hear" will be called something different. Maybe "stereo mix" or something else. The device just records anything coming from the soundcard. Play around and see if you don't have something similar to "what u hear" with a different name.

  • Missing "What You hear" on X-Fi Titanium

    Hi,
    at first, sorry for my bad english, but without practice, its not easy
    Last week I bought an brand new Creative Soundblaster X-Fi Titanium Fatalty Professional. I?m using Vista Ultimate x64 an the drivers from the original CD (Driver version 2.7.).
    On my old X-Fi Extreme Music, I had a recording Device which was called "What you hear" (or "What U hear" , the original german description is "Was Sie h?ren"). It has the same function like "Stereomix" on other soundcards.
    I miss this recording device on my new X-Fi Titanium, there is only the microphone, the line in and the digital in. Is this feature not longer Part of the Productline? I think it was verry useful.
    Is there any chance to enable "What you hear" on the new X-Fi Soundcards? I reinstalled the driver finally, but this was not the solution^^
    Again, sry for my bad english, but may, somebody can help me.
    Best regards
    DarkRhinon
    Message Edited by DarkRhinon on 08-2-2008 08:46 PM

    weksi wrote:
    Also, do you think the recording of "What You Hear"?would still be possible?through on-board sound chipset?
    Hm, my onboard Sound (its called ASUS SupremeFX X-Fi, but its only a Analog Devices Chip with some X-Fi software feature)? already have the "Stereomix". Hm... I will miss the "What U hear" on the X-Fi, imho its a not a good decision to remove this feature. Its also a bit mindless, because it looks like that other manufacturer still use this feature and intigrate it in their soundcards...:smileyindifferent:

  • Xifi pro + WinXP -- Wont record What You Hear

    XiFi Pro, WinXP Pro, SoundMax HD audio (onboard).
    No matter what I try, I can not get my XiFi Pro to record any audio when set to "What You hear." The level indicators on the Creative recorder never light up. I can record from the XiFi's mic input.
    XiFi driver: 1.1.96.0
    SoundMax driver: 5.10.1.5670
    Creative MediaSource version 5.26.02

    Originally Posted by DanB2644
    XiFi Pro, WinXP Pro, SoundMax HD audio (onboard).
    No matter what I try, I can not get my XiFi Pro to record any audio when set to "What You hear." The level indicators on the Creative recorder never light up. I can record from the XiFi's mic input.
    XiFi driver: 1.1.96.0
    SoundMax driver: 5.10.1.5670
    Creative MediaSource version 5.26.02
    Not knowing your complete operating enviroment...one suggestion is to make sure you disable audio in bios if you have an embedded audio chip on your motherboard.

  • Re: Creative and VISTA - Works on Record WHAT You HEAR AT LAST - Follow These Steps!!!!

    I have "Sorted" Out My Creative to work (NOT RECORDING WHAT YOU / I HEAR) with VISTA?I use Musicmatch to Play and or Real Audio to Listen / Stream?from the Net (You may use ANY Player for the same) and then Press the Record on My COOL EDIT Pro and WHALA There I Have Music that has been Recorded - What a Relief!!!!!!!:smileyvery-happy:?Get / Download COOL EDIT PRO and do ONLY the Following Settings:?Set the Settings in the Options - Settings - Multitrack - Click / Tag in "Open Order" on "Rec Play" and Click/Tag in "Start Order" on "Play/Rec." and Click/Tag in Default Rec on "Stereo" and Away You Go?Enjoy Your Creative Sound Card and Recording / Streaming Yet AGAIN?Best Wishes?Andre (from South Africa - East Coast - Port Elizabeth - The Friendly City)

    I do not have 'what you hear' as an option any longer with the new Titanium; I had it with my older X-Fi Fatalty, but not this new card.
    I would imagine it has something to do with Microsoft trying to limit recording of DRM-protected content, and Creative bowing to their wishes.

  • [WIN7] Enable Microphone and "What U Hear" at the same time?

    Hey folks!
    I am trying to enable both at the same time on my Windows 7 in order to record Battlefield 2 and my own voice at the same time.
    Please do NOT start with "do this and that", I have tried everything for at least 1 year by now and the only way to make it work is to have microphone and "What U Hear" enabled. Apparently it is not possible. In order to activate one of both you have to make it "Default" record device but then the other device gets disabled. Trying to record the disabled device obviously ends up in silence.
    What is the reason for that and how to enable BOTH devices at the same time?
    I am using PAX Drivers which the maker always updates to the latest Creative Drivers. So I am up to date.
    Thank you a lot in advance.

    Thank you for your reply.
    Well, yes, the microphone is activated. And if I put the microphone playback volume to 100 I can hear myself talk even with "What U Hear" as my default recotding device. But once battlefield 2 starts it uses the default recording device for the in-game voice over IP. If I select "what U hear" as the default device it will basically put the game sound into the VOIP...
    What I tried was - set microphone as default device, launch BF2 so it registers the microphone as VOIP input, then alt tab out, select What U Hear as default device but it does not get activated! I only see a bar at the microphone.
    What I want is to be able to have TWO volume bars, in What U Hear AND Microphone so I can use the microphone for BF2 and What U Hear as gameplay-sound for my recording device.
    In Windows XP this was possible. In Windows 7 this is missing.
    The problem here is that once a recording device (the Default one usually) is being used by a program it BLOCKS the other recording devices.

  • "what you hear" playing all the t

    I have a onboard soundblaster 24-bit li've. I am not sure exactly what the problem is, but whenever I use a mic I can always hear the background system sounds of my computer on top of my voice (ex. system ding, and music I am playing). I found it hard to believe that my mic was picking it up. So I turned down my speakers and played a sound file on my computer while recording it with "sound recorder" (the basic one that comes with windows). and sure enough even though I turned my speakers off it still played through.
    Looking for a solution as I use voice communication software almost daily to coordinate with project leaders. It is very annoying not being able to hear anything without it being echoed back to them.
    I hope this post makes sence to you as I am not all that versed in english =(.
    Thanks in advance for your help
    Edit: just realized I should probably add the fact that I do have "mic" checked under recording devices and not "what you hear"Message Edited by Spyder226 on 08-30-2006 07:24 PM

    In order to hear people talking I will need my wave output unmuted...
    so I dont think this will work.
    As for that yes, It does not record anything (sndrec32) when I play music or something but then again I cannot hear anyone so it somewhat defeats the purpose. Let me take another crack at explaining this
    Example:
    ) I will connect to ventrilo while playing music on my headphones.
    2) I will then try and talk to my team leader by pressing PTT (push to talk hotkey). When I press this key, he will hear all of my music as well as my voice all at once. So it makes it very hard to understand me.
    3) Once I turn off the music he can hear me ok again, but every little system sound that occurs he can hear at double the volume.
    Also just to clarify, I only have the microphone input selected in recording and I have all the playback selections muted except for "wave" and "playback"Message Edited by Spyder226 on 08-30-200608:22 PM
    Message Edited by Spyder226 on 08-30-2006 08:22 PM

  • Windows7 64 bit and Audigy 2 choppy sound while recording what you hear

    Driver version I have currently installed 6.0..37 I tried to record off youtube in "What You hear" while using Wavelab5 mode and the sound is very choppy, I tried every setting I could think of but am unable to record, I managed to get one recording but tnext one with same settings is coming up rearry choppy. Another problem when browsing the support I click on "If your product is not listed above, please click here" I choose Audigy-->Audigy2 but I get nothing in the next window, I tried on FF and IE8 but nothing populates in the next field, found another way to get to the drivers but when I choose Windows 7 64 bit and choose drivers it takes me to the main support page here <a rel="nofollow" href="http://support.creative.com/welcome.aspx"]http://support.creative.com/welcome.aspx[/url]
    I am on:
    Intel Q2600
    Gigabyte GA-X48-DQ6
    2 x 2GB DDR2 - 800 CL4 Ballistix
    Windows7 Ultimate 64 bit
    Kaspersky Internet Security 200.
    All current Windows7 updates are installed.
    Oh yeah I can hear music (mp3, avi, youtube or any online source) no problem in either winamp, WMP2 or in Wavelab5 while monitoring. It's only the recording that is giving me trouble.
    Cheers
    Rob.

    <div class="DownloadDate">"Release date : 3 Jul 09<div class="DownloadShortDesc">This?download is a?driver providing Microsoft? Windows?7, Windows Vista? and Windows XP support for Creative Sound Blaster? Audigy? series of audio devices. For more details, read the rest of this web release note."?
    Right where do I start...... I got the latest drivers installed, "What You Hear" was working for about oh four recordings then stopped and back to choppy recorded sound, I went through alll options and nada. So I downloaded Audacity to see if this was a problem with Wavelab and re-tried. Well same thing choppy sound and even rebooting did not help. So I will be taking EVERYTHING!!!!!! CREATIVE off my machine, if these idiots cannot be bothered to release drivers that work then I'm going elsewhere. My music creating will have to be put on hold, my 22m will still have to sit in it's box.
    Creative you are all a bunch of ?$"?%$%" idiots period. You have ALWAYS (till now in my case anyway) had good drivers. Even though Windows 7 has been in RC for ages you (absolutely missed that boat, hell you didn't even get up to try to catch it) cannot be bothered to write drivers that work and your idiotic half cooked attempts at customer service to give your bread and butter (that's right your customers who keep you in business) solid drivers are an absolute joke. YOU CAN KISS MY SHINY METAL HINEY!!!!! (thanks Bender lol). I am going to my onboard drivers. Thanks Creative (the name "creative" is kind of contradiction in itself, you should look up the meaning of the word lol). Oh and I will be advising EVERYONe who thinks of upgrading to Windows7 to avoid Creative hardware.
    :angry::angry::angry::angry::angry::angry::angry:: angry::angry::angry::angry::angry::angry::angry::a ngry::angry:
    Question for forum users: what is the best way to get rid of every bit of drivers?

Maybe you are looking for