What you need to know before buying an antenna

Isn’t it time you upgraded to an antenna? Wait… what? Upgrade to an antenna? Whether or not you’re a cord cutter (meaning you’ve cancelled your monthly television service) you might find that adding an antenna to your entertainment viewing space can be a great upgrade for a variety of reasons. Whatever those reasons are, here’s what you need to know before buying an antenna.
 

I don't set out to sell anything, I'm an independent writer tasked with writing stuff about things to inform people. We link stuff to help people find things if they want to buy them, but the above isn't a sales pitch, it's info to help people figure out if they want or need something. 
I didn't know that there was a cabal of antenna dealers who have been promulgating a myth (as a writer: nicely done there) about the nature of NTSC and ATSC; I hadn't ever considered that the antenna market was that large. When I received the request to write an article about antennas I was actually surprised; antennas don't have the support of major telecommunications companies and I sincerely doubt that there's going to be a run on them because of this article. I saw this as a bit of a public service opportunity to talk about a technology that a small segment would be interested in. 
Anyway, I'm not sure we're going to get much farther on this; yes Best Buy sells antennas, but no, they didn't ask for an ad. They asked for an article that focused on how these antennas work and what to look for. Thank you for adding your insight about ATSC - I think that was actually covered in paragraphy three, but it's nice to see it spelled out more directly.
Have a nice day - and if you'd like to discuss this directly, please send me a DM on twitter @thetechnogram

Similar Messages

  • NSS and LUN expanding - what you need to know before you migrate

    Thought I'd share, since this isn't in any documentation or TID that I
    can find.
    Before you move to OES2 Linux with NSS or multipathing code or EVMS, you
    may want to consider this limitation (IMO, a major limitation if you're
    running an Enterprise).
    If you SAN allows you to grow/expand a LUN (ie, LUN1 was 50 GB and now
    you grow it to 100 GB), you cannot use the new space until you reboot
    the server itself. If you're running NCS, then you need to reboot every
    node that can host the clustered resource before you can expand the NSS
    pool.
    The issue is a bug in the devmapper portion of SLES. ANYTHING that uses
    devmapper will prevent the further layers (ie, multipathing or EVMS)
    from seeing the additional space until you reboot the server.
    Obviously rebooting servers in the middle of the day to add more space
    affects Enterprise services to your users. As does making them wait
    until off-hours before they can write/save any data to the servers. Not
    to mention rebooting multiple nodes in your NCS cluster.
    Novell won't fix this until SLES 11. Even then (ie, if you implement
    OES2 now and can live with the limitation it won't be truly fixed in
    SLES 11 if you're using NSS/EVMS), as the limitation will still be in
    EVMS in SLES 11. Therefore, you'd have to migrate your data to LVM2 (I
    believe that's what Novell is switching to). Yet another major
    disruption for your users.
    So, if you're thinking about OES2 with NSS/EVMS or multipathing, you may
    want to consider the effect this will have to your userbase (ie, how
    many times do you want to migrate your data?)
    In our case, looks like it's goint to be one migration --- to MS
    Windows.

    Hi,
    General rule, if you think rebooting is NOT an option AND you are not using clustering - you're looking for trouble.
    I know I can increase space to my cluster with out kicking my users offline.
    Worked for NSS.
    Worked for OCFS.
    Limitation noted and ignored.
    -M
    Originally Posted by KittyNoLegs
    Thought I'd share, since this isn't in any documentation or TID that I
    can find.
    Before you move to OES2 Linux with NSS or multipathing code or EVMS, you
    may want to consider this limitation (IMO, a major limitation if you're
    running an Enterprise).
    If you SAN allows you to grow/expand a LUN (ie, LUN1 was 50 GB and now
    you grow it to 100 GB), you cannot use the new space until you reboot
    the server itself. If you're running NCS, then you need to reboot every
    node that can host the clustered resource before you can expand the NSS
    pool.
    The issue is a bug in the devmapper portion of SLES. ANYTHING that uses
    devmapper will prevent the further layers (ie, multipathing or EVMS)
    from seeing the additional space until you reboot the server.
    Obviously rebooting servers in the middle of the day to add more space
    affects Enterprise services to your users. As does making them wait
    until off-hours before they can write/save any data to the servers. Not
    to mention rebooting multiple nodes in your NCS cluster.
    Novell won't fix this until SLES 11. Even then (ie, if you implement
    OES2 now and can live with the limitation it won't be truly fixed in
    SLES 11 if you're using NSS/EVMS), as the limitation will still be in
    EVMS in SLES 11. Therefore, you'd have to migrate your data to LVM2 (I
    believe that's what Novell is switching to). Yet another major
    disruption for your users.
    So, if you're thinking about OES2 with NSS/EVMS or multipathing, you may
    want to consider the effect this will have to your userbase (ie, how
    many times do you want to migrate your data?)
    In our case, looks like it's goint to be one migration --- to MS
    Windows.

  • What are some things i need to know before buying Aperture 3? because i know a little about digital photography

    Help please

    Your Mac seems to be compatible with Aperture (http://support.apple.com/kb/DL1657), but is your camera? Here is a list of cameras, that are supported by Aperture, see: Apple - Aperture - Technical Specifications - RAW Support
    If your camera is not on the list, you can work in Aperture with jpegs, tiffs, psd images, but not with raw images.
    because i know a little about digital photography
    That is a bit ambigious - do you want to say that you have some experience with digital photography, or nearly none at all?  Have you tried iPhoto and do you like it? iPhoto comes on every newer mac included for free, so you could give it a try. Aperture and iPhoto are related, they are both supporting a lossless workflow - you can always undo all edits and your original images are preserved, and both are compatible. Each application can open the photl library of the other app.
    Only Aperture has advanced editing tools and more possibilites to organize and search your images.
    To elaborate on Kirby's question: To help you decide, it would help to know, if you have used any software for organizing a photo library previously, and and what you are looking for. If not, give iPhoto a trial run - it should be on your Mac. If you see, that you need more advanced features than the basic set in iPhoto, check, if Aperture will give you those and then buy Aperture. You can continue right where you left off in iPhoto.
    -- Léonie

  • Things you need to know before updating

    I have seen that more and more users come with a lot of problems after they try to update their devices. These problems are due to unaware of how to properly and carefully prepare the phone before and during the update.Always make sure that:
    Battery level: Should be at least at 60~70% charged ( SUS or PCC advice you to have it at least at 50%, but to ensure better performance, keep it well above 50%).
    Backup your contacts, data, apps, etc you can use PCC, MyphoneExplorer or Alternatives on How to backup Xperias; it is recommended to use a computer to backup your media (music, videos, photos).
    USB: The USB cable should not be disconnected at any time, if the computer stopped recognizing there is NO possibility that the USB cable to disconnect during the process (as this will result in an incomplete install, which will only make more trouble for you).
    Power outages: If you know you live in an area that is prone to blackouts (electric failures) and/or slow internet service/connection, try to look for other places to update; as some updates need a reliable and fast internet connection, the update file could be up to 1 GB.
    Follow the steps: Carefully follow the steps provided by the update tool whether it’s SUS or PCC.
    Notes:
    Some users encountered issues with PCC on Windows 8 and Windows 8.1.To overcome these issues, download SUS.
    There are instances when SUS does not show all phone models. In these cases, you need to run it in COMPATIBILITY MODE with Windows 7.
    For all kind of questions, issues contact any of the support members on the forum.
    Have fun with your devices!
    SUS: Sony Update Service                                                                                 
    System requirements:                                                               
    Internet connection (preferably broadband)
    USB cable
    Intel® Pentium® 4, 2.0 GHz or higher, AMD Athlon
    500 MB free hard disk space
    512 MB RAM
    1 available USB 2.0 port
    Windows XP™ (Home or Professional) with SP2 or later
    Microsoft® Windows Vista™
    Microsoft® Windows 7
    Microsoft® Windows 8
    PCC: PC Companion
    System requirements:
    Internet broadband connection
    Intel® Pentium® 4, 3.6 GHz or equivalent AMD processor
    5 GB free hard disk space
    2 GB RAM
    1 available USB 2.0 or USB 3.0 port and USB cable
    Microsoft® Windows XP™ SP3 (32 bit), Vista (32/64 bit) or Windows 7 (32/64 bit) or Windows 8 (32/64 bit)*
    All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

    Starting the 21st of July, Sony Update Service is no longer supported. From now on,only PC companion can be used.
    For the official announcement,check here.
    All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

  • Upgrading From XP - What you need to know

    Hi,
    As many of you are aware, support for Windows XP ends on April 8th 2014.
    What does it mean?
    End of support means that Microsoft will no longer issue Windows Updates for XP to maintain the security and integrity of the Operating System.
    Do I Need to Upgrade?
    If you are currently using Windows XP for every day activity then it is recommended to upgrade to a supported version of Windows to ensure you are receiving important security updates for your operating system.
    In addition to updates, you may also experience compatibility issues with new hardware such as a new printer, document scanner, webcam etc. Most vendors will also move away from writing XP compatible drivers.
    I subscribe to security and antivirus software, Do I need to upgrade Windows?
    In short, Yes. While these antivirus and security packages do a good job in most cases, they do not unfortunately provide the relevant necessary security updates to maintain the integrity of the operating system. In fact most antivirus packages are reliant
    on the operating system updates to maintain security.
    Must I Upgrade To Windows 8?
    This is a personal choice. Windows 8 is the latest Microsoft operating system, you can also upgrade to any supported operating system such as Windows Vista, Windows 7 or indeed Windows 8. The only obstacle is to find a vendor that still sells licensing for
    the older products.
    How can I check If My Computer Is Ready For Windows 8
    Windows Upgrade Assistant will assist you to check your computers compatibility with Windows 8
    Here is a summary of the system requirements:
    Processor: 1 gigahertz (GHz) or faster
    RAM: 1 gigabyte (GB) (32-bit) or 2 GB (64-bit)
    Free hard drive space: 16 GB (32-bit) or 20 GB (64-bit)
    Graphics card: Microsoft DirectX 9 graphics device with WDDM drive
    I don't know if my computer is 32bit or 64bit
    You will be glad to know that Windows 8 comes with both 32 bit and 64 bit versions.
    To see whether a PC running Windows XP is capable of running a 64-bit version of Windows, do the following:
    Click Start.
    Right-click My Computer, and then click Properties.
    If "x64 Edition" is listed under System, your processor is capable of running a 64-bit version of Windows.
    If "x86 Edition" is listed then its a 32bit installation
    Where can I get Windows 8?
    Your local computer store should be able to assist you with a copy. Windows 8.1 is the current version.
    You can also use the
    Microsoft compare and decide website to determine which version you require and select the buy now option for online purchase.
    How Do I Install Windows 8?
    It is important to note that upgrading from XP to Windows 8 will not retain your files. You should back up your files prior to upgrading either by using an external hard drive, or using
    Sky Drive which is Free
    Microsoft's Put Together An Upgrade Procedure From XP/Visa to Windows 8
    It is also important to note that installing from DVD will require your system to have a DVD drive or if purchasing online you will need a DVD writer drive to write the installation DVD prior to installation.
    Feel free to ask any questions which are not covered above.
    Regards,
    M
    If you find my information useful, please rate it. :-)

    I don't set out to sell anything, I'm an independent writer tasked with writing stuff about things to inform people. We link stuff to help people find things if they want to buy them, but the above isn't a sales pitch, it's info to help people figure out if they want or need something. 
    I didn't know that there was a cabal of antenna dealers who have been promulgating a myth (as a writer: nicely done there) about the nature of NTSC and ATSC; I hadn't ever considered that the antenna market was that large. When I received the request to write an article about antennas I was actually surprised; antennas don't have the support of major telecommunications companies and I sincerely doubt that there's going to be a run on them because of this article. I saw this as a bit of a public service opportunity to talk about a technology that a small segment would be interested in. 
    Anyway, I'm not sure we're going to get much farther on this; yes Best Buy sells antennas, but no, they didn't ask for an ad. They asked for an article that focused on how these antennas work and what to look for. Thank you for adding your insight about ATSC - I think that was actually covered in paragraphy three, but it's nice to see it spelled out more directly.
    Have a nice day - and if you'd like to discuss this directly, please send me a DM on twitter @thetechnogram

  • Need to know before buying subscription

    I want to buy one of the min packages you have in here
    I will use it from south America to call Israel
    and I want to know if the
    http://www.skype.com/intl/en/prices/pay-monthly/#I​L
    120 min means that I pay only €1.69/month to call Israel and I can extend this on every month or this package is available only if i buy it to 12 months?

    I don't set out to sell anything, I'm an independent writer tasked with writing stuff about things to inform people. We link stuff to help people find things if they want to buy them, but the above isn't a sales pitch, it's info to help people figure out if they want or need something. 
    I didn't know that there was a cabal of antenna dealers who have been promulgating a myth (as a writer: nicely done there) about the nature of NTSC and ATSC; I hadn't ever considered that the antenna market was that large. When I received the request to write an article about antennas I was actually surprised; antennas don't have the support of major telecommunications companies and I sincerely doubt that there's going to be a run on them because of this article. I saw this as a bit of a public service opportunity to talk about a technology that a small segment would be interested in. 
    Anyway, I'm not sure we're going to get much farther on this; yes Best Buy sells antennas, but no, they didn't ask for an ad. They asked for an article that focused on how these antennas work and what to look for. Thank you for adding your insight about ATSC - I think that was actually covered in paragraphy three, but it's nice to see it spelled out more directly.
    Have a nice day - and if you'd like to discuss this directly, please send me a DM on twitter @thetechnogram

  • Version 20. & 3 What You Need to know (Wifi ONLY A...

    Once you have installed the new firmware you will not be able to define axcess point only WiFi you acnnot select 3 and in settings you always get axcess denied. there fore you need to do the following to fix this issue. (Hard & soft reset does NOT work
    You need to ring 3 on 0800 3586795 or 0800 3586796 after you have installed Version 20.0.019 you will then be sent a text with the correct settings. Open the text and click save.
      Hope this helps you all

    Didn't have this problem myself.
    As an alternative to calling the monkeys, can you not just request the settings from their Website ->
    http://www.three.co.uk/Help_Support/About_my_mobile/Software_settings - then click 'Over the air' from the right handside?.
    Regards
    Iain

  • MacBook Pro....things you need to know before you buy!!!

    Helpful hints before you buy your MacBook Pro 15 or 17 inch:
    1. New MacBook Pro...does not have a firewire 400 port!!. If you have to transfer data from an old (2 years old) MacBook Pro to new one...need a 800 firewire cable or a 400 to 800 cable!!
    2. New MacBook Pro with HD Cinema 30 inch. The two items are not compatible unless you purchase the $99 Dual (not single), I repeat Dual..."Mini Display Port to Dual-Link adapter:
    http://store.apple.com/us/product/MB571Z/A?fnode=MTY1NDA3Ng&mco=MTA4NDU1NDM
    The reason I am posting this is that I bought a MacBook Pro 15 inch on Monday and I specifically told the Apple people at the store what I had: 2 year old MacBook Pro and Cinema HD and what I would need and they sold me the mini single adapter. Nothing worked. Went to the store 3 times and no one could help me. Finally a guy from Australia, on this forum, was able to answer my call for help!!! I actually had to take his email into the store and show it to the Apple folk and they finally got me the correct adapter. Today is Friday, 4 days later and I am finally able to work on a project that has been on hold while I figured out something fairly simple...so much for these "Apple genius people." Just think the problems I would have had if I had an older Mac laptop or a PC laptop?!?@!

    Hi kleeks,
    Glad you got it sorted in the end!
    To be fair, most of the Genius bar people are very good and your experience was probably not typical, but it is also worth remembering that some of us here have been using Macs since before some of the Geniuses were even born, so we often know a thing or two that they may not have cottoned on to yet! When in doubt, a second opinion here can often be well worth obtaining.
    Really glad you have it running as it should now.
    Cheers
    Rod (the "guy from Australia")

  • What you need to know about British Telecom Total ...

    I don't want to waste time on this forum. I've changed to Virgin - and thank God !
    Here's the text of the last letter I wrote to Customer Service Director, BT plc, Correspondence Centre, Durham, DH98 1BT.  I got the briefest of replies, which dealt with none of the points I raised.
    During April I was engaged in searching for a new flat. There were a number of possible candidates. I phoned British Telecom to ask about the service to the flat I favoured
    Your representative told me that I could expect up to 4 Mbs in this are. That was a lie
    The maximum possible speed is 2 Mbs. My IP Profile has typically been 1,2Mbs and currently you have restricted me to .9 Mbs and then to .78 Mbs
    Given that I was at the start of an 18 month contract with you, I would not have moved to this address had I been told – truthfully – by BT that this area is the worst in Cardiff for Internet access.
    In the same call your representative told me that there would be no problem providing a telephone service to 93 B because the line had very recently been in use and just needed to be switched on at the exchange That was a lie.
    Before moving in, I plugged a handset into the BT socket. There was no 'soft dial tone' which confirms that an inactive line is still connected to the exchange. I notified BT three times, but was assured – in a patronising manner – that then line had been tested and would be connected Friday 30th May. It wasn't of course.
    I notified BT by email. No reply on Saturday, nor the following days. On Tuesday an engineer called me. He told me my phone was working. I said it wasn't. He said he would check and ring me back within a half hour. He did not do so.
    It was not until the following Friday, that an engineer called and the problem was resolved. By that time I had spoken to the landlord and discovered that the BT line had not been in use for some time. Previous tenants had taken the Virgin Media telephone service. The flat had been decorated and the condition of the BT cabling inside the house could not be guaranteed.
    You have therefore deprived me of my telephone/internet service during the first week of May. You have not offered any compensation.
    I now raise a matter which may seem marginal, but which speaks volumes for the way British Telecom manage their business. The BT website offers a 'BT Community Forum'. I registered to use it because I wanted to document my experience for the benefit of other customers. The procedure ends with a message saying that an email with a clickable link will be sent, serving to verify the identity of the person registering. No such email was received. I tried again. No result. I notified BT. No reply.
    After perhaps six emails, a young woman phoned me. She wasted half an hour of my time establishing what I had already said in my emails. She said she would pass the matter on to technicians. No response – of course.
    It is evident that BT does not allow customers to register to use the BT community Forum, for fear that you will receive bad publicity. Given the shoddy manner in which you treat your customers, I imagine that bad publicity is inevitable. The Forum is a sham.
    I now come to the main issue – the provision of an Internet service. I wish once more to make it clear that it is not the slowness of this service that is the principal issue – it is the dishonesty of British Telecom personnel.
    I add that I am being advised by an independent expert who is an ex-BT manager with knowledge of the provision of digital services in Cardiff. You will understand that the press are always interested in 'whistle-blowers'
    If I had been honestly advised by BT that the area I was proposing to move to was poorly served by BT for digital services – and if I was experiencing the best speed that the line could offer me – about 1.5 Mbs real download speed – then I would consider myself bound by my contract with you. I would have moved to this area, knowing what performance I could expect.
    However, as I have outlined above, my decision to move here was largely based on a lie told to me by your representative on the phone – that I could expect up to 4Mbs
    In addition, the line speed has now been restricted to .78 Mbs. In my last letter I said that on the first occasion this 24 hour restriction was imposed I had complained and the peak time restriction was lifted. I had 1.2 Mbs off-peak, and .9 Mbs peak speeds.
    This continued to the end of May. On the 2nd June ther 24 hour restriction was reimposed.
    I have received an email from your customer service manager stating that this is simply because of 'long line length'. Very little technical knowledge is required to know that that statement is nonsense.
    My independent advisor tells me that in fact technicians constantly 'tune' speeds in bad areas. Obviously you try to get as many customers under contract as possible by lying to them about the speeds they will receive, then progressively reduce their line performance in order to accommodate other customers
    It is quite simply an outrage that BT should behave in this fashion, and nothing will please me more than having an opportunity to describe all of this in court.
    I estimate that the damages in time and stress you have caused me amount to one thousand pounds. I look forward to receiving your cheque for that amount.

    Hi sonsenfrancais,
    Welcome to the forum.
    I am sorry to hear you've now moved to another provider following some problems with the installation of your line and broadband speeds, if there's anything you'd like us to look into feel free to drop me an email at [email protected] with your BT account details.
    All the best,
    Stephanie
    Stephanie
    BTCare Community Manager
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post. If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • What you need to know concerning Playbook, Bridge, Q20, Verizon, AT&T and T-Mobile

    I'm on Bold 9900 and Bridge works flawlessly with my Playbook at 4G speed.  Problem is, I am on T-Mobile and the service is very spotty where I live. They sent me the signal boosters but they don't help. I'm thinking on moving back to AT&T or Verizon and getting the Q20 when it comes out, BUT I don't want to lose ability to bridge to my Playbook. I love my playbook!  Any advice - most appreciated?  Thanks so much!   Michaux.
    Mod Edit: Edited post to comply with the Community Guidelines and Terms and Conditions of Use

    Sorry about the Web link, noobie here, I will read rules now

  • What are the main COPA principles in manufacturing you need to know?

    Hello
    What are the main COPA principles in manufacturing you need to know?
    thanks

    Mr Comandante,
    Which exactly is the information that you are looking for ?
    It does not matter which strategy of manufacturing you are using. At the end of the period, the differences between the comparison of the planning costs with the actual costs can be taken to COPA, to be reflected as Inefficiency or differences in Production.
    If you are using discrete (Make to order) or Process Manufacturing, you need to configure in the profile of the settlement of the order a profile for COPA.
    If you are using repetitive manufacturing in the collector of cost.
    Please feel free to ask for any further information that you want, mi estimado amigo
    Gustavo

  • What do *you* need to know to be successful with Workflow and BPM?

    All,
    The Workflow and BPM Survey, sponsored by ASUG - but not limited to ASUG members - will close on October 24.
    This information will be shared (with identifying characteristics removed) with ASUG, DSAG, VNSG, and SDN-ers to help target areas in which the various user groups and SAP can target upcoming webcasts and presentations. 
    You do not need to be an ASUG member to fill out this survey! All responders are welcome, and as is usually the case with a survey, the written-in responses are very valuable.
    Although this survey asks for name and company affiliation, all identities will be kept confidential.
    Please help us (SAP, SDN, ASUG, other user groups) help you, by telling us about what you need to see for educational content.
    http://ws.asug.com/ss/wsb.dll/5/ASUGSAPworkflowBRMsurvey.htm
    Please feel free to share this link with other WF/BPM Professionals. The survey will close on October 24, 2008.
    Thanks for your input!
    Sue

    It's a XYZ stage. I have a COM dll to use it. I did an instrument from this dll and everything was working fine untill I uninstalled LabWindows. IVI shared components seems to be having problems as I coundn't uninstall it when I tried to do a clean reinstallation. Maybe the issue comes from there..
    I am using the error variables and the error pop up does pop up but no other "system" error as IVIdll is missing or something like this..

  • Want to play pre-intel game, got a PowerPC iMac and want to install OS 9, anything I need to know before hitting ebay?

    Found the pre-intel machine, but unfortunately (in this case) it is running OS 10.4.11. Want to make sure before I buy from ebay that I am getting the OS 9 I can use on this computer. Saw a reboot set for OS 9, will that work? Or do I need to already have 9 installed, which I don't. Does it matter which OS 9 version I get, or if advertised as for another model of computer will it translate to mine? Thanks ahead of time!

    yayamaui wrote:
    hmmm, ok, need some clarification, please bear with me, not very techie, but love learning.
    So I have a 2003 iMac PowerPC G4 (PowerMac6,1 768 MB 1 GHz) currently running OS 10.4.11. NO DISKS whatsoever- someone gave me the computer, it was about to go in the "recycling". (which is such a shame- WHAT A COOL LOOKING COMPUTER!!!) I also have this year's model of MacBookPro and have had many macs, so I am not trying to be an apple rip off- just trying to play a game they have made obsolete. Wish I had kept a few of my older ones... 
    When I try to play this really cool game it says it that the classic environment is no longer supported. So question time: can I purchase a copy of the tiger os and reload it? I understand that the disks are extremely model specific and apple info says my model originally shipped with 10.2.3 installed, but what about the black retail copies verses the grey lables? And would this theoretical re-install of tiger then automatically include the classic mode, or is that a seperate disk? And if one purchaces this retail install disk, are codes necessary?  I have the overall user password from the original owner, but alas she tossed the disks... 
    the cool game is Alice: an Interactive Museum and is worth all this trouble...  it will play on os 9. The sheepshaver, looks way too complicated for my level of computer knowledge, but thanks for the suggestions.
    "The transcendant world of Alice was created through the cooperation of artists in three fields - the painter Kuniyoshi Kaneko, the musician Kazuhiko Kato and the computer-graphics artist Haruhiko Shono. The theme of this unusual collaborative effort derives from Lewis Carroll's Alice's Adventures in Wonderland and Through the Looking-Glass. Kaneko provided numerous of those of his pictures that have been influenced by Alice's world and Kato contributed the music. With these as his material, Shono has created an elaborate interactive environment. The stage upon which this drama unfolds is a house of twelve rooms that include a gallery, an atelier, a wine cellar and a photo studio, each connected to others by corridors, doors, and even secret passageways. The persistent player will find as well a single exit that opens to the outside world. There is also hidden throughout the twelve rooms a deck of playing cards. On each card is a message that will enable you to unlock the mysteries of Alice's world. A wonderland of striking works of art, interactivity and compelling adventure game is waiting to be explored by YOU."
    Your iMac G4 is one of the following three:
                                  [click on image to enlarge]
    Accordingly, the earliest operating system that will boot your computer is either OS X 10.2.3 or 10.2.7 depending on which specific Mac.  Since you say your label says it shipped with OS X 10.2.3, it must be the first one listed.  Hence you cannot boot OS 9 on this computer, but you can install OS 9 into the Classic Environment on it.
    Reading these Apple Support documents will help clarify what you need to purchase:
    http://support.apple.com/kb/TA21153?viewlocale=en_US
    http://support.apple.com/kb/HT1585?viewlocale=en_US
    So while it would be helpful to have a set of OS X Jaguar install Disks in your library, it does not look like it is essential; you just need to have OS 9 to install into it.
    I think I made this offer once before...
    Let me know if the set you purchase works for you.  Contact me by email; screenname at AmericaOnLine
    Is that the "Luxo" iMac G4?  I still have the one my daughter purchased years ago.  The original disk set must be around here somewhere...
    If not, I have quite an extensive OS Library from those days.  I'll swap you!

  • Things I should know before buying a MacBook Pro?

    Currently looking into buying my first MacBook, and I am looking at waht I believe to be last years MacBook Pro, but I am wondering what essential things should I know before buying one? And what things should I buy to go with it? Or anything I should be aware of?

    Doelago wrote:
    For the budget it was more like, dont jump from 1200€ to 2400€.
    And I am done with Windows Laptops. They said that the one I am currently running would be good and last me for years, but that was BS. As a rather technologically challenged person I want a machine that will work and not attract viruses in droves.
    Mac's are not exactly cheap, and to do 3D gaming your going to need the 15" MacBook Pro or better, prefeably the top end model with powerful graphics to last the longest with paid OS X upgrades one has to perform annually.
    You wanted to be aware of buying a Mac, I can tell you this. Even though a Windows PC tends to get malware, it all depends upon the user and their actions online, sharing files and email services choices. I have Windows using friends and it's all about what sites they visit online, if they share files or get email on the machine or via a reliable web email service like Gmail, Hushmail etc that watches for malware/spam.
    The best thing about Windows 7 is if you make the System Restore boot disks/images regularly, date them and make your file backups, you can recover your own system if it gets malware. Security Essentials anti-malware is free. Microsoft supports Windows with security and stability updates for apx 10 years on average, all you need to do is find a reputable PC hardware vendor with good products.
    Laptops don't last nearly as long as desktops, this goes for expensive Mac's as well as PC's.
    Apple's 13" Macbook Pro and under series are nothing more than your standard Windows 7 Office store PC in a fancy case, their performance and OS upgrade options tend to slow down faster than the 15" MacBook Pro series and up.
    Also Apple releases a new OS X version every year, if you don't upgrade and thus have to upgrade all your third party software, your DENIED security and stability updates rather fast. The new OS X versions tend to slow down older machines to force you to consider a hardware upgrade before the machine has lived it's full hardware lifespand.
    So with Apple your paying more for your annual computing costs than with Windows PC, and with a expensive MacBook Pro laptop, one drop or theft/lost away and your out a very expensive investment.
    Over the last 10 years, I have spent nearly $10,000 on Apple hardware for $1000 a year, my Windows XP using friend has spent $1000 total over that same last 10 years for a Windows XP desktop that is still going actually (installed a new video card for him last week)
    If you want a machine that will really last, get a Windows 7 tower with upgradable options, like 4GB of RAM expandable to 16GB, a decent power supply and video card upgrade options. With Mac's you can't upgrade the video card and the MacPro you can't find newer faster cards. So your 3D gaming on a Mac is going to get cut off a lot sooner as newer, more hardware demanding 3D games are released.
    Sure Windows is a pain, however as a lifelong Mac user I can honestly say Windows 7 is pretty decent operating system compared to Vista and XP, it's not quite as nice as OS X, nor as reliable, however if one takes the proper precautions while on the Internet, makes System Restore Disks/Images (included in Windows 7 now) then one can restore their own system themselves quite easily, a Mac requires a rare/occassional reinstall too depending upon the user abuse, it's not immune to that, also there ARE Mac based malware, just not as much.
    All one has to do is find a quality PC vendor for their hardware,  I hear Dell is making cheap crap now, however they do have a nice system in place for hardware upgrade options.
    Another issue with Mac's, is that 99% of the buisness world uses Windows PC's, Mac's comprise of only 6% now of the total computing market compared to over 90% Windows PC's, your going to need to keep your skills up there and on a Mac, you will have to BUY Windows and install it on your Mac, a extra cost plus the Windows software you need to keep your skills up on. I made that mistake only using Mac operating systems all these years, I am suffering for that  now.
    So if your rich college student, then get a powerful Mac laptop that can run Windows in Bootcamp and a virtual machine program.
    If your a poor college student, then forget the Mac and get a cheap $400 Windows PC laptop and a Playstation 3, both disposable and cheaply replaceable.
    There is nothing special about a Mac anymore other than a "status symbol", if you buy a decent PC latop with a good screen, good graphics it will do the job you need and not tend to get stolen like Mac's do, or in some cases a unknown jealous PC user will spill a drink on your Mac or try to walk off with it like has occured with my 17" MacBook Pro.
    Times are tough and if you want a flashy quality PC laptop, get a Sony or something, least it runs Windows for the next 10 years or until the hardware drops.
    Apple is all about providing the most expensive computer for the rich consumer market, not the most practical anymore.
    Laptops always last longer than open desktop towers and Apple doesn't really care about the lower cost market, rather see you have something than be always paying a lot more with Apple products you can't afford.

  • BluRay - what you need

    Thought I'd put a list of things you need for one's MacPro in order to get BD authoring with output to SL and DL BD media. With the drop in BD Media prices ($4.99/disk), everyone can author HD content to BluRay now using FCS (or iMovie or whatever video post production tool you have).
    So here is what you need:
    1. Toast 10 Titanium Pro - http://www.roxio.com/enu/products/toast/pro/overview.html
    2. LG GGW-H20L Blu-ray burner - http://www.newegg.com/Product/Product.aspx?Item=N82E16827136137
    3. AMS eSATA 5.25" external enclosure - http://www.newegg.com/Product/Product.aspx?Item=N82E16817332019
    4. eSATA cable Extender for MacPro - http://eshop.macsales.com/item/Newer%20Technology/MPQXES2/
    Total cost is $455 for a complete solution. This is an external eSATA setup (I did this for maximum BD drive burning performance) but if you prefer USB 2.0 setup just remove item 4 ($25) from the list above (the external enclosure supports USB 2.0 also).
    BD-R prices are dropping daily ($4.99) but I use these: http://www.newegg.com/Product/Product.aspx?Item=N82E16817132051
    Some things you need to know if you go with eSATA, the drive MUST be turned ON BEFORE you boot into your Mac or it will not be seen. The drive will show up just like any other DVD drive with all the same Eject/Close features, etc.
    For those of you going eSATA route, installing the eSATA extender cable is not difficult, but if you're the type of person that doesn't want to touch anything inside your MacPro, then the USB 2.0 route is probably better (aka don't purchase item #4 above).
    If you are running CS4, you don't need item #1 (Toast 10). So you could really start doing BD now for as little as $300.
    Happy BD folks - 25-50GB of entertainment bliss
    Rob.

    I've been using the cheap BD-R and not had any coasters yet, but I don't burn at max speed -- the drive will burn at 6X, but the cheap media says 2X so that's what I burn at. I haven't tried Dual layer nor the Re-writeable BD media yet, but great success with single layer.
    I don't consider adding the eSATA extender cable that difficult but I've built PCs from scratch before so I have some knowledge. But like I said, if eSATA is a little too much work, the external enclosure I listed also supports USB 2.0. I prefer eSATA because it's a more reliable electrical signal and is not sharing a bus like USB.
    I have an older Sony BDP-S300 player that I recently updated the firmware (had to in order to play The Matrix collection BD). No problems with playback, crisp, clean clear -- well, as clear as the source that is

Maybe you are looking for