What you want'

where is the search bar? I've looked everywhere and can't find it. It looks like you hve to scroll through every song to findwgat you want

If there is another device on your account, you can 'upgrade' their number to the phone you want, then when it arrives you can activate it, then just 'switch devices' which will not force you to change your plan if you do it online.
I too, after almost 20 yrs with them (long before there WAS a 'Verizon' am also seriously considering switching, as I am paying more and it used to worth it to me for the reliability customer service, but those have been rapidly declining over the past couple years. It is sad, I have brought them a LOT of clients, been very loyal, but as our contracts run out (I have 8 devices on my account) I will be moving them somewhere that makes more logical client retention decisions.
Good luck & have a Blessed day!

Similar Messages

When I go to restore my phone; is there any way to pick what you want back on your phone or do you have to get everything backed up?

When I go to restore my phone; is there any way to pick what you want back on your phone or do you have to get everything backed up?

Thank you. I was afraid of that. I backed up from iCloud. I looked at the iTunes one - it had four different ones on there; was hoping I could see because my grandson's phone was redone last year (his mom messed it up then) and didn't know anything was backed up to iTunes. He lost a lot of stuff that time. I'm just trying to get his phone back to par after someone changed his passcode on him as a joke and forgot what they changed it to a few days ago. They should change it so one could go in and pick what they want or don't want. Thank you again for your time. I do appreciate it.

Is there a way to turn the pattern matching example in Labview to instead of loading a rectangle around what you want the template to be you can use an image display , I've be trying and can get no where with it

What I want to do is , have two images on image displays and the pass them through the same setup as the pattern matching example to get the number of matches , I have attached what I have done and also given the pattern matching example program as well.
Hope to get answers back soon,
Thanks Alan
Attachments:
screenshot.docx ‏48 KB
Pattern Matching Example.vi ‏100 KB

Hi there!
The example used can be adapted for comparing two images, however the algorithm and coding for finding the differences is more specific to your actual problem. In terms of the loading and displaying of the images, this can be done in the same way.
Once you have some sort of algorithm, then you can automate the learning and matching by simply wiring them in order. (in the example, these are put in case structures as they are waiting on response from the front panel)
I hope that this helps,
Liam A.
National Instruments
Applications Engineer

Are there any payments ontop of what you want to buy?

ok, to register for the itunes store you need to register credit card details or use BT click&buy...
i want to use Click&Buy, can anyone tell me if its costs anything extra to use this service, or do you only pay for what you purchase?

There is no extra money. You only pay for what you buy.

Some iPod songs are scratching/skipping/call it what you want...

Hey,
After returning a faulty iPod in for this "new" 60GB iPod I had some trouble. When I uploaded the songs, some of them would make a scratching noise like a bad cd in an old cd player. I've tried to restore my ipod twice, and even tried uploading the songs on an older software version of itunes - yet still I have some songs doing this. It's a random selection of songs that appears to be happening to. I hope someone can assist me!

Marion,
You can do that in your LOV code. Add a filter based on the PK you want , and yes you can use bind variables in the LOV source code.
something like :
Select x display , y return
from table_z
where col_a = :P1_someitem;Hope this helps,
Sam
Please reward good answers by marking them correct or helpful!

ADF EMG - ADF Feature Wishlist - tell Oracle what you want

Interested in letting Oracle know what features you'd like in future JDeveloper releases? Over on the ADF EMG we're discussing this right now:
http://groups.google.com/group/adf-methodology/browse_thread/thread/cc13519585872e66?hl=en
If you're not a member take the opportunity to sign up, and let Oracle know what you think the next killer JDeveloper feature is.
CM.

Interested in letting Oracle know what features you'd like in future JDeveloper releases? Over on the ADF EMG we're discussing this right now:
http://groups.google.com/group/adf-methodology/browse_thread/thread/cc13519585872e66?hl=en
If you're not a member take the opportunity to sign up, and let Oracle know what you think the next killer JDeveloper feature is.
CM.

No idear what you want me to do

I have not got a clue what you mean mark this discussion as a question i am very very bad useind a computer so you will have your cut out today

Just tell us what you need help with.

Shortcuts on what you want

As a webdesigner/projectmanager I spend long days in PH and I could be a lot more effective if I could add shortcuts to functions as I go.
Example: It would be helpful with shortcuts for autoselect layer and autoselect group as well as select style normal, select style fixed ratio and select style fixed size.
Solution: Right-click on any function, get menu, select "add shortcut" and choose combo.
BTW: Isn't it a bit strange that the forum-system on Adobe.com doesn't let you attach files of any graphics format, not even jpg?
(But you can add exe-files and other formats possibly containing malware?)
Einar Ryvarden, Aller Internett, Norway

Example: It would be helpful with shortcuts for
autoselect layer and autoselect group as well as select style normal,
select style fixed ratio and select style fixed size.
There is another way to do what you are asking. For the move Tool set up a TOOL PRESET (this is obtainable from here) …
You can then assign an Action that will choose your tool presets. Actions can be assigned Function keys combnations (F keys). This will automatically toggle 'group' and 'layer' options exaclty as you are trying to do.
This also applies to the Select Tool.

How do you get the pop up box that ask what you want to open a document with, to not pop up at all when you want to open something from your email?

When I open a attachment from an email a box always pops up that says what program do i want to open this document with. How do i get rid of this pop up box?

Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://support.mozilla.org/kb/Troubleshooting+plugins
Do a malware check with some malware scanning programs on the Windows computer. 
Please scan with all programs because each program detects different malware.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: Home Page: http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*http://support.kaspersky.com/viruses/solutions?qid=208280684
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

What you wanted to know about Time values

Hello
I tried to gather in a single document the useful infos about the use of time values in Numbers.
I must thanks pw1840 which checked the English syntax.
Here is the text only document.
Files with the sample tables are available on my iDisk:
<http://idisk.me.com/koenigyvan-Public?view=web>
Download:
ForiWork:ForNumbers:Time in Numbers.zip
*STORED DATE-TIME VALUES - BASICS*
Numbers clearly states that it stores date-time values, no less no more. This means these values consist of two parts: a date and a time. It is important to note that both parts are present even if only one of them is displayed.
When we type the time portion only, it includes the current date even though it may not be displayed.
But when we apply the formula: =TIME(0,0,ROUND(TIMEVALUE(B)24*6060,0)), we get a date-time value whose numerical value of the date portion is 0. This means, in AppleLand, 1 janvier 1904. Such a date-time allows us to make correct calculations, but there are two true drawbacks:
1) Since TIMEVALUE() returns a decimal number, when we calculate the corresponding number of seconds we MUST use the ROUND() function. While calculations with decimal numbers give the wanted value, they may not be exact and be off by + or - epsilon. And
2) The structure of Numbers date-time values is such that the time part is always in the range 0:00:00 thru 23:59:59.
There is also a detail which seems annoying to some users. The minimal time unit is the second because time values are in fact a pseudo string representing the number of seconds between the date-time and the base date-time, 1 janvier 1904 00:00:00.
-+-+-+-+-
*TIMEVALUE() FUNCTION*
When Numbers Help states that the TIMEVALUE() function "converts a date, a time, or a text string to a decimal fraction of a 24-hour day.", it means that the operand for the function TIMEVALUE() may be something like:
31/12/1943, 31 décembre 1943, or 31 déc. 1943 described as a date;
1:12:36 or 1:12 described as time; or
31/12/1943 23:59:59 described as a text string.
The date may also be 31/12/43 but here the program must guess the century. According to the rule, this one will be 31/12/2043 (yes, I am very young).
All of this is not exactly what we are accustomed to but it is perfectly logical as described. My guess is that those who don't understand are simply clinging to old habits and are reluctant to adopt an unfamiliar approach .
-+-+-+-+-
*ELAPSED TIME (DURATION)*
Given a table whose 1st row is a header, I will assume that column B stores starting-time values and column C stores ending-time values. Both do not display the date component of the date-time values. We may get the difference in column D with the formula:
=IF(OR(ISBLANK(B),ISBLANK(C)),"",TIMEVALUE(C)-TIMEVALUE(B))
which returns the elapsed time as the decimal part of the day.
We immediately encounter a problem. If ending-time is the day after the starting-day, the result will be negative. So it would be useful to revise the formula this way:
=IF(OR(ISBLANK(B),ISBLANK(C)),"",IF(TIMEVALUE(C)>TIMEVALUE(B),0,1)+TIMEVALUE(C) -TIMEVALUE(B))
But some of us may wish to see results in the traditional format which may be achieved using:
=IF(OR(ISBLANK(B),ISBLANK(C)),"",TIME(0,0,ROUND((IF(TIMEVALUE(C)>TIMEVALUE(B),0 ,1)+TIMEVALUE(C)-TIMEVALUE(B))24*6060,0)))
-+-+-+-+-
*DURATION SUMS > or = 24 HOURS*
In the examples above, we always assumed that the durations where smaller than 24 hours because Numbers states clearly in the Help and the PDF Users Guide that time values are restricted to the range 00:00:0 to 23:59:59. For longer durations we must fool Numbers.
First problem: we are adding several time durations. Each duration is in the authorized range and the result is greater than 24 hours.
As before, starting-time values are in column B, ending-time ones are in column C, and the elapsed time value is in column D. The formula is:
=IF(OR(ISBLANK(B),ISBLANK(C)),"",IF(TIMEVALUE(C)>TIMEVALUE(B),0,1)+TIMEVALUE(C) -TIMEVALUE(B))
in column E, the formula for the cumulative elapsed time value is:
=SUM($D$2:D2)
in column F, converting to time format, the formula is:
=TIME(0,0,ROUND(MOD(E,1)24*6060,0))
in column G, the formula for showing more than 24 hours in the day/hour/minute format is:
=IF(E<1,"",INT(E)&IF(E<2," day "," days "))&F
in column H, expressing total elapsed time in total hours using the traditional time format, the formula is:
=IF(E<1,F,INT(E)*24+LEFT(F,LEN(F)-6)&RIGHT(F,6))
in column I, expressing total elapsed time in total hours using the traditional time format, an alternate formula is:
=IF(E<1,F,INT(E)*24+HOUR(F)&":"&RIGHT("00"&MINUTE(F),2)&":"&RIGHT("00"&SECOND(F ),2))
Of course the user would choose the format used in column G or the one in column I for his table. There is no need to keep all of them. It would be fine to hide column F whose contents are auxiliary.
Second problem: individual durations may be greater than 23:59:59 hours.
Again, column B is used to store starting date-time, column C stores ending date-time, and durations are calculated in column D. Since B and C are storing full date-time values, we may use this simple formula to find the duration:
=C-B
in column E, the time portion of the duration given in time format is:
=TIME(0,0,ROUND(MOD(D,1)24*6060,0))
in column F the formula to show the duration as days/hours/minutes is:
=IF(D<1,"",INT(D)&IF(D<2," day "," day(s "))&E
in column G we give the elapsed time in total hours using a time format. The formula is:
=IF(D<1,E,INT(D)*24+LEFT(E,LEN(E)-6)&RIGHT(E,6))
in column H we give the elapsed time in total hours using a time format. An alternate formula is:
=IF(D<1,E,INT(D)*24+HOUR(E)&":"&RIGHT("00"&MINUTE(E),2)&":"&RIGHT("00"&SECOND(E ),2))
If the duration is greater than 24 hours, the results in columns E and F are not a time value but a string. So the value in column D (which is time duration only) is useful.
-+-+-+-+-
*PROBLEM WITH ENTERING TIME*
When you wish to enter 12:34 but 12 is the number of minutes, remember that Numbers will decipher this as 12 hours and 34 minutes. Simple tip:
Assuming that your original entry is in column B, then in column C use this formula to align the minutes and seconds for proper Numbers interpretation:
=IF(ISERROR(TIME(0,LEFT(B,SEARCH(":",B)-1),RIGHT(B,LEN(B)-SEARCH(":",B)))),"",T IME(0,LEFT(B,SEARCH(":",B)-1),RIGHT(B,LEN(B)-SEARCH(":",B))))
-+-+-+-
*MISCELLANEOUS NOTES*
• Of course, the addition of two dates and multiplication or a division applied to one date means nothing and would generate the red triangle announcing a syntax error.
• We may add a time value to a date-time: If B contains a date-time and C contains a time, the following formula will return the sum of the two values:
=B+TIMEVALUE(C)
• We may strip the time value of a full date-time one with the formula: =DATE(YEAR(B),MONTH(B),DAY(B))
• Just as a reminder,
=EDATE(B, 3) adds 3 months to the pure date stored in B
so, of course,
=EDATE(B, 12) adds one year to the pure date stored in B
• If B and C store date-time values,
=C-B returns the difference in decimal days.
=DATEDIF(B,C,"D") returns the number of days between the two pure dates. It's identical to =DATE(YEAR(C),MONTH(C),DAY(C))-DATE(YEAR(B),MONTH(B),DAY(B))
=DATEDIF(B,C,"M") returns the number of months between the two pure dates.
=DATEDIF(B,C,"Y") returns the number of years between the two pure dates.
Three other variants are available which use the parameters "MD","YM" and "YD".
Yvan KOENIG (from FRANCE lundi 25 août 2008 15:23:34)

KOENIG Yvan wrote in his "*STORED DATE-TIME VALUES - BASICS*" section:
The minimal time unit is the second because time values are in fact a pseudo string representing the number of seconds between the date-time and the base date-time, 1 janvier 1904 00:00:00.
This is not exactly true. Numbers files store date-time values in a string format consistent with ISO 8601:2004. This format explicitly includes year, month, day, hour, minute, & second values.
This may be verified by examining the uncompressed index.xml file in a Numbers package. For example, the first day of 1904 is stored as cell-date="1904-01-01T00:00:00+0000" & of the year 0001 as cell-date="0001-01-01T00:00:00+0000." This format is not a numeric value of seconds from a base date-time, often referred to as a "serial time" format, that is used in applications like AppleWorks (or Excel?).
Note that the time value (all that follows the "T" in the string) actually has four components, the last one (following the plus) representing the time zone offset from UTC time in minutes. AFAIK, Numbers does not set this to anything besides "+0000" but interestingly, it will attempt to interpret it if set by manually editing the file. For example, change cell-date="1904-01-01T00:00:00+0000" to cell-date="1904-01-01T00:00:00+0120" & the cell will display the last day of December of 1903 as the date, but will still show the time as 00:00:00. This suggests a future version of Numbers might be time zone aware, but currently it is unreliable & not fully implemented.
Anyway, Numbers does not use the first day of 1904 as a reference for stored date-time values, although it will add that date to "dateless" time values imported from AppleWorks spreadsheets. Although I have not verified this, I believe it will also seamlessly translate between ISO & serial time formats as needed for Excel imports & exports, using the first day of 1900 as needed.
Some other things to note about the ISO standard:
• It permits fractional time values in the smallest time unit present, so for example "T10:15:30" could be represented as "T10:15.5" but Numbers does not support this -- the cell will appear empty if the index file is manually edited this way.
• It does not stipulate whether date-time values represent intervals or durations (although it includes an explicit format for intervals between any two date-time values, known as a period). This means a future version of Numbers could support durations without the addition of a new data storage type, but legacy & import/export issues could make this too impractical to implement.
• It supports a variety of other formats, including date-only, time-only, day-of-year, week-of-year, & various truncations (just hours & minutes, for example). All are unambiguous so a future version of Numbers could support them, but files generated with those versions would not be backwards compatible with the current version.
For completeness, I will add that instead of using complex formulas to manipulate single-cell date-time values in Numbers, it is sometimes more straightforward to use multiple cells, one for each unit of time (for example, days, hours, minutes, & seconds), plus simple arithmetic formulas to combine them. Since each unit is a simple number, this results in highly portable, accurate, & "future-proof" tables, especially for durations. This is particularly useful for multimedia work in which the units might include video or film frames or audio samples.

Latest itunes version: how to select what you want transferred

how can you select what to transfer from your mac via itunes to my iphone 4?
I am lost in the new version of iTunes 10.11 and need to switch off the transfer of music to my iphone. how can i do that, so that it only transfers and syncs the email accounts etc.?

First, the latest iTunes is version 11.0.1. There is no iTunes version 10.11 as you indicate in your post above.
If you're running iTunes 11.0.1, then you can see all the iPhone tabs just as you did before by clicking on the iPhone icon in the upper right when the iPhone is connected to iTunes. Or if you would like the old appearance of iTunes with the sidebar, you can do View > Show Sidebar from iTunes' menu.
You can select what does and does not get synched on the iPhone's tabs in iTunes just as before. For example, if you don't want music synched, click the music tab in the upper right while in the iPhone area and uncheck "Sync music".

"Watch what you want, when you want". Do me a favo...

First time on the forum and oh how I wish I'd done my research on here before ordering a BT package. I wouldn't have touched this service with a barge pole if I knew then what I know now.
From day 1 "you dont have to be at home to receive your equipment,we'll leave it in a safe place for you". Yep,very safe. It was in the local sorting office. So a 2 hour wait for that to open and a 6 mile round trip to collect.
So now we're up and running except no On Demand (the reason I opted for Bt).OK online help says it can take up to ten days to "stabilise",but meantime just pay for it and shut up. If I had switched electricty supplier would I be expected to pay for ten days before I could switch a light on? I think not.
Four days in I decide to call technical help who go through all the checks I have previously done, no joy there. Operator thinks I could benefit from a bb accelerator contradicting the online help as I have no extensions and my hub is straight in to the master socket. She thinks maybe its best I wait ten days.
Second operator thinks maybe I should wait ten days. He finally gets a grip of what I'm telling him and organises an engineer.
Four days later an engineer appears. He says only eight days have passed maybe its best I wait......you get my drift?
Now we're talking. He has a brand new hub and V+ box. This should do the trick he says. Hmmm, it did for all of 5 minutes. Oh maybe its not the magic ten days after all he thinks, its an external fault and he's not that type of engineer but he'll do his best and pass on the message, hopefully I should hear something within 48 hours.
Has anyone on the forum managed to cancel without penalty? How can it possibly be legal for BT to take money from me and provide nothing?

Two hours later. These are the results. Alas no change in the On demand.
<script type="text/javascript">// paintProgressAndMessageOnBar(100,"The test has successfully completed"); // </script> Test1 comprises of two tests
1. Best Effort Test: -provides background information.
Download Speed
2525 Kbps
0 Kbps
7150 Kbps
Max Achievable Speed
Download speedachieved during the test was - 2525 Kbps
For your connection, the acceptable range of speeds is 600-7150 Kbps.
Additional Information:
Your DSL Connection Rate :8128 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM)
IP Profile for your line is - 7150 Kbps
2. Assured Rate Test: -provides background information.
Download Speed
1016 Kbps
0 Kbps
600 Kbps
Max Achievable Speed
Download speedachieved during the test was - 1016 Kbps
For your connection, the acceptable range of speeds is 576-600 Kbps.
Additional Information:
Assured Rate IP profile on your line is - 600 Kbps
We were unable to identify any performance problem with your service at this time.
It is possible that any problem you are currently, or had previously experienced may have been caused by traffic congestion on the Internet or by the server you were accessing responding slowly.
If you continue to encounter a problem with a specific server, please contact the administrator of that server in the first instance.
Please visit FAQ section if you are unable To understand the test results.

SURVEY: Tell the After Effects team what you want and what you think.

Michael Coleman just posted a web survey about After Effects.
Please take a few minutes to tell us a few things about yourself, your projects, and your workflow. You'll also get a chance to indicate which potential features are most important to you. Surveys like this to are a great way for you to direct our efforts.
The survey will probably take about 15 minutes to complete. It is hosted at Surveymonkey.com.
Click this link to get started.
The information we gather is just for Adobe's use and we promise not to do anything annoying with your survey responses. All data will be kept confidential. No information about you will be sold or furnished to any other company whatsoever, nor will you receive any unsolicited email messages because of your participation in this survey.
On behalf of the entire After Effects team, thanks!

Always glad to do these. I printed the previous survey from 2007(?) and it's interesting to see what features are now included in CS4, which ones are still to be included, and which ones have been completely forgotten.

What happened to print preview and the ability to select what you want to print?

I've tried all of the suggestions and still no print preview.

Does this also happen if you use the Print items in the file menu?
*Tap the Alt key or press F10 to show the Menu bar.
Does anything open at all?
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Go ahead, say it. You reccommend another browser not repair FF. Does that mean new FF is unfixable? I can handle that if that's what you want.

I think the question is self explanatory. You recommend using a competitor's browser because you can't or won't fix the new FF. And if that is correct (as you said) I can do that.

So you have a few different issues causing you to crash, which usually points to some system stability issues or something else going wrong on your computer.
This is going to require a bit of a shotgun approach, we will try a few different things and hope something sticks :)
First, Do the following:
* Scan for malware: [[Troubleshoot Firefox issues caused by malware]]
* Install all windows Updates, especially make sure you have Windows 8.1 Update 1
* Update your graphics Driver [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
* Finally, try to Reset Firefox. [[Reset Firefox – easily fix most problems]]
Let me know if it still crashes after these steps :)

What you want'

Similar Messages

Maybe you are looking for