Whatis the FileCatcher functionality in SAP WebDispatcher???
Hi all,
the subject pretty much says it. What exactly is this FileCatcher and how does it work. I seem to be unable to find any information about it.
Can someone point me in the right direction?
Thanks in advance,
Christian
Hi Christian,
could you please provide me more details where you have found informations regarding the FileCatcher ?
The only thing I know is the File Access Handler as described in the SAP Help Portal :
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/c4/87153a1a5b4c2de10000000a114084/frameset.htm">Documentation for icm/HTTP/file_access_XX</a>
Kind Regards
Thomas Alt
Similar Messages
-
HT5534 Is it too much to ask for some summary of what the new functionality is
These update summaries ought to include at least a link to some real explanation of what functionality the update fixes or improves. Simply stating
provdes access to iOS products is worthless.It's a compatibility update to read files created by iWork for iOS 1.7, but it doesn't include features or anything else
-
Does anyone know what the Trigger function do?
Hi all,
I recently have to build a device driver for positioning controller. Can
someone tell me under what circumstances the function Trigger under GPIB
488.2 becomes useful? What to expect after this function is executed? Help
doesn't explain much about this function.
Thanks alot.
Nam.Hi,
Trigger line allows programmer to start a process on one or several instruments at a given time. For example, an ADC may often be programmed for triggered single-shot acquisition. Trigger may be critical for synchronizing purposes.
LQ a ecrit :
> Hi all,
>
> I recently have to build a device driver for positioning controller. Can
> someone tell me under what circumstances the function Trigger under GPIB
> 488.2 becomes useful? What to expect after this function is executed? Help
> doesn't explain much about this function.
>
> Thanks alot.
>
> Nam. -
Unable to use the infographic function for SAP Lumira Personal Edition
Hi All,
Just to check, has the function "Infographic" been removed for the "free" account users?
Thanks.We plan to remove this limitation in the free Personal Edition of Lumira before the end of this year. In the meantime, as mentioned by Chris, you can initiate the 30 day trial option which you can activate from within the "Home" page of the Personal Edition of Lumira.
Here's more info on accessing the 30 day trial of the Standard Edition:
SAP Lumira, Standard Edition Free for 30 Days. Here's How! -
Whats the best functional combination for PI
Hi All,
i am a PI developer, and its been more than 3 yrs i am working with XI.
I am somewhat comfortable with abap and java coding also for interfaces.
I just wanted to know ... which functional area i can pick up... if we consider down the line 2-3 yrs...
any idea guyz....hi,
>>>I just wanted to know ... which functional area i can pick up
any if you can go for one project with a senior you can learn a lot
and the rest from books, courses, etc.
XI does not narrow anything
Regards,
Michal Krawczyk -
What the way to be SAP partner .
hi all
I'm interested to be sap partner for resell and implement BO .
any one have idea about which certification can i take to be a partner and the way to be .
osama kaabar
Junior SAP Business Objects AdministratorHi osama you can contact SAP in your region
I would like to direct you the following link Become a Partner | SAP
poorna -
What is the diff b/w Sap Scripts and Smart Forms
Hi,
Whats the diff b/w SAP Scripts and Smart Forms..
I need the internal explanation for both Smart Forms and SAP Scripts mean when we execute what happens whether Print Program r Forms starts execution 1st and SIMILARLY FOR SMARTFORMS WHETHER FM'S R FORMS.
Thanks & Regards,
Gopi.Hi
Difference with SMARTFORMS vs. SapScript(SE71)
The Following are the differences :-
a) Multiple page formats are possible in smartforms which is not the case in SAPScripts
b) It is possible to have a smartform without a main window .
c) Labels cannot be created in smartforms.
d) Routines can be written in smartforms tool.
e) Smartforms generates a function module when activated.
f) Unlike sapscripts (RSTXSCRP), you cannot upload/download Smartform to your local harddisk.
It was said that it was provided in CRM 3.0 version, but not available in R/3. You can download smartforms into Local PC in a XML format. In the same way you can upload this XML format into Smartform. From the smartform editor itself you can call download option, if you are working in CRM 3.0 environment.
In R3 also, you can download into XML format. However, it's not sure about uploading. Refer to the program 'SF_XSF_DEMO'.
In 4.7 Enterprise, other have seen this utlity which is completey missing in 4.6c. There is functionality to downlaod a complete form or only a particular node. (Utilities -> Download form). It will create a XML file and save it in the hard disk.
For others, if you want to download/upload the Smartforms source, you will need the help from the Basis people. What you can do is to create a Transport and then FTP down to your local harddisk. When you need the Smartform source in another system, you have FTP up the Smartforms file back to the SAP server. Finally, the Basis team, will tp it into your system.
g) The protect and endprotect command in sapscript doesn't work with smartforms. For example on a invoice: First data of position no 80. is printed on page one, other data of position no 80 is printed on page 2. And there's nothing you can do about it. Actually, there is something you can do about it. By using a folder node and checking the 'protect' checkbox, everything in that folder will be page protected.
check out this link:
http://www.sap-img.com/smartforms/sap-smart-forms.htm
Reward points if helpful.
Regards,
Swathi. -
SAP XI - Using the substring function.
Hi Experts,
I am having trouble using the substring function in SAP+XI. I have to consider the value from characters 6 to 19 for a target field of 25 characters. Every time I ma using the standard substring function it is giving an error Array Out of Bounds Exception.
Please tell me how to proceed.
Thanks
AniruddhaHi,
Above error wil come if the input string length is less than the substring length what you are trying to get..
i.e length of the input string is less than 25 characters... do some validations or pass substring as 6 and 0 ..
HTH
Rajesh -
What are the math functions in SAP?
Hi,
This is what u want may be
Mathematical Functions
ABAP contains a range of built-in functions that you can use as mathematical expressions, or as part of a mathematical expression:
[COMPUTE] <n> = <func>( <m> ).
The blanks between the parentheses and the argument <m> are obligatory. The result of calling the function <func> with the argument <m> is assigned to <n>.
Functions for all Numeric Data Types
The following built-in functions work with all three numeric data types (F, I, and P) as arguments.
Functions for all numeric data types
Function
Result
ABS
Absolute value of argument.
SIGN
Sign of argument: 1 X > 0
SIGN( X) = 0 if X = 0
-1 X < 0
CEIL
Smallest integer value not smaller than the argument.
FLOOR
Largest integer value not larger than the argument.
TRUNC
Integer part of argument.
FRAC
Fraction part of argument.
The argument of these functions does not have to be a numeric data type. If you choose another type, it is converted to a numeric type. For performance reasons, however, you should use the correct type whenever possible. The functions itself do not have a data type of their own. They do not change the numerical precision of a numerical operation.
DATA N TYPE P DECIMALS 2.
DATA M TYPE P DECIMALS 2 VALUE '-5.55'.
N = ABS( M ). WRITE: 'ABS: ', N.
N = SIGN( M ). WRITE: / 'SIGN: ', N.
N = CEIL( M ). WRITE: / 'CEIL: ', N.
N = FLOOR( M ). WRITE: / 'FLOOR:', N.
N = TRUNC( M ). WRITE: / 'TRUNC:', N.
N = FRAC( M ). WRITE: / 'FRAC: ', N.
The output appears as follows:
ABS: 5.55
SIGN: 1.00-
CEIL: 5.00-
FLOOR: 6.00-
TRUNC: 5.00-
FRAC: 0.55-
DATA: T1(10),
T2(10) VALUE '-100'.
T1 = ABS( T2 ).
WRITE T1.
This produces the following output:
100
Two conversions are performed. First, the contents of field T2 (type C) are converted to type P. Then the system processes the ABS function using the results of the conversion. Then, during the assignment to the type C field T1, the result of the function is converted back to type C.
Floating-Point Functions
The following built-in functions work with floating point numbers (data type F) as an argument.
Functions for floating point data types
Function
Meaning
ACOS, ASIN, ATAN; COS, SIN, TAN
Trigonometric functions.
COSH, SINH, TANH
Hyperbolic functions.
EXP
Exponential function with base e (e=2.7182818285).
LOG
Natural logarithm with base e.
LOG10
Logarithm with base 10.
SQRT
Square root.
For all functions, the normal mathematical constraints apply (for example, square root is only possible for positive numbers). If you fail to observe them, a runtime error occurs.
The argument of these functions does not have to be a floating point field. If you choose another type, it is converted to type F. The functions themselves have the data type F. This can change the numerical precision of a numerical operation.
Regards -
F-4 Key on Windows 8.0 what is this function for?
I accidentally pushed F-4 Key by itself, and my screen was wider and something pop up on the right side of my screen that had 4 choices of ??? My question is what is this function for?? And after I push it again it went back to normal. I would also like to know what the other functions are for on top row F-1 to F-12 and yes I am a new user to this laptop from HP. I know there is also windows + keys commands and I am interested in knowing more about what goes on with my pc. F-3 has a icon that looks like a light, and yes I have a lot to learn, Thanks in advance for anyone who wishes to give me help on these matters.
Hi,
On the top of F4 key, you should see a screen symbol and normally (w/o preesing F4) this will output to an external monitor. For Fn+F4, please read the following article:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c00294488
What is your machine ? Depeinding on the model/product of your machine, some keys my line up a bit difference but you can see symbol on each key and work this out. For example F2 and F3 are for brightness, F5 for backlit keyboard (not all machines). F6 to F11 for sound/video and F12 for wireless. On your machine, some keys may be swapping around but basically they all have one symbol each.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
What the result while a user thread holding pidlock to sleep?
I know pidlock is used to protect process create/exit/swap and so on. When a user kernel thread sleeps holding pidlock, the dispatcher doesn't work or system will hang? So what the real function of pidlock?
Thanks?Hi, can't be sure out here, but it sounds that perhaps there may have been a hidden folder behind those other ones? Did you drag select?
If it isn't that then perhaps som Disk/OS maintenance is in order. -
SAP Webdispatcher - Reverse Proxy Configuration
Hi All,
Need your help in configuration SAP Webdispatcher as reverse proxy. Currently we are using Apache as reverse proxy, but we are facing 400 Bad Request error and not able to solve the issue.
So We are planning to install Webdispatcher and configure reverse proxy and test.
Below is the Apache Reverse proxy configuration. Need help in configuring the same parameters in SAP Webdispatcher
ProxyPass /sap http://srmerver:8000/sap
ProxyPass /SRM-MDM http://mdmserver:50100/SRM-MDM
ProxyPass /mdmimages http://portalserver:8090/mdmimages
ProxyPass /irj http://portalserver:50100/irj
ProxyPass /saml2 http://portalserver:50100/saml2
ProxyPass / http://portalserver:50100/
ProxyPassReverse /sap http://srmserver:8000/sap
ProxyPassReverse /SRM-MDM http://mdmserver:50100/SRM-MDM
ProxyPassReverse /mdmimages http://portalserver:8090/mdmimages
ProxyPassReverse /irj http://portalserver:50100/irj
ProxyPassReverse /saml2 http://portalserver:50100/saml2
ProxyPassReverse / http://portalserver:50100/
Regards
PonnusamyHi
Kindly refer the SCN link
How to...Configure SAP Webdispatcher as a reverse proxy
http://basisondemand.com/Documents/Whitepaper_on_SAP_Web_Dispatcher.pdf
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a015cea3-9627-2e10-a792-8f39e3d0b59d?QuickLink=index&…
Regards
Sriram -
What are the different functions used in sap script?
Hi,
What are the different functions used in sap script? What are the parameters used in each Function?
Regards,
Maheshhe print program is used to print forms. The program retieves the necesary data from datbase tables, defines the order of in which text elements are printed, chooses a form for printing and selects an output device and print options.
Function modules in a printprogram:
When you print a form you must used the staments OPEN_FORM and CLOSE_FORM. To combine forms into a single spool request use START_FORM and END_FORM.
To print textelements in a form use WRITE_FORM. The order in which the textelements are printed, is determined by the order of the WRITE_FORM statements. Note: for printing lines in the body, you can also use the WRITE_FORM_LINES function module.
To transfer control command to a form use CONTROL_FORM.
Structure of a print program
Read data
Tables: xxx.
SELECT *
FROM xxx.
Open form printing - Must be called before working with any of the other form function modules.
Must be ended with function module CLOSE FORM
call function 'OPEN_FORM'.....
To begin several indentical forms containing different data within a single spool request, begin each form using START_FORM, and end it using END_FORM
call funtion 'START_FORM'.....
Write text elements to a window of the form
call function 'WRITE_FORM'.....
Ends spool request started with START_FORM
call funtion 'END_FORM'.....
Closes form printing
call function 'CLOSE_FORM'...
OPEN_FORM function
Syntax:
CALL FUNCTION 'OPEN_FORM'
EXPORTING
APPLICATION = 'TX'
ARCHIVE_INDEX =
ARCHIVE_PARAMS =
DEVICE = 'PRINTER'
DIALOG = 'X'
FORM = ' '
LANGUAGE = SY-LANGU
OPTIONS =
MAIL_SENDER =
MAIL_RECIPIENT =
MAIL_APPL_OBJECT =
RAW_DATA_INTERFACE = '*'
IMPORTING
LANGUAGE =
NEW_ARCHIVE_PARAMS =
RESULT =
EXCEPTIONS
CANCELED = 1
DEVICE = 2
FORM = 3
OPTIONS = 4
UNCLOSED = 5
MAIL_OPTIONS = 6
ARCHIVE_ERROR = 7
INVALID_FAX_NUMBER = 8
MORE_PARAMS_NEEDED_IN_BATCH = 9
SPOOL_ERROR = 10
OTHERS = 11
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Some important parameters:
FORM Name of the form
DEVICE
PRINTER : Print output using spool
TELEFAX: Fax output
SCREEN: Output to screen
OPTIONS Used to control attrubutes for printing or faxing (Number of copies, immediate output....
The input for the parameter is structure ITCPO.
CLOSE_FORM function
CALL FUNCTION 'CLOSE_FORM'
IMPORTING
RESULT =
RDI_RESULT =
TABLES
OTFDATA =
EXCEPTIONS
UNOPENED = 1
BAD_PAGEFORMAT_FOR_PRINT = 2
SEND_ERROR = 3
SPOOL_ERROR = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Paramerters:
RESULT Returns status information and print/fax parameters after the form has been printed. RESULT is of structure ITCPP.
WRITE_FORM function
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = ' '
FUNCTION = 'SET'
TYPE = 'BODY'
WINDOW = 'MAIN'
IMPORTING
PENDING_LINES =
EXCEPTIONS
ELEMENT = 1
FUNCTION = 2
TYPE = 3
UNOPENED = 4
UNSTARTED = 5
WINDOW = 6
BAD_PAGEFORMAT_FOR_PRINT = 7
SPOOL_ERROR = 8
OTHERS = 9
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Some important parameters:
ELEMENT Specifies which textelement is printed
WINDOW Specifies which window is printed
TYPE Specifies the output area of the main window. This can be:
TOP - Used for headers
BODY
BOTTOM - Used for footers
FUNCTION Specifies whether text is to be appended, replaced or added
Example of how to use the WRITE_FORM function module together with a script.
Form layout of the MAIN window
/E INTRODUCTION
Dear Customer
/E ITEM_HEADER
IH Carrier, Departure
/E ITEM_LINE
IL &SBOOK-CARRID&, &SPFLI-DEPTIME&
/E CLOSING_REMARK
The print program
Writing INTRODUCTION
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'INTRODUCTION'
FUNCTION = 'SET'
TYPE = 'BODY'
WINDOW = 'MAIN'
EXCEPTIONS
OTHERS = 8
Writing ITEM_HEADER
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'ITEM_HEADER'
FUNCTION = 'SET'
TYPE = 'BODY'
WINDOW = 'MAIN'
EXCEPTIONS
OTHERS = 8
Set ITEM_HEADER into TOP area of main window for subsequent pages
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'ITEM_HEADER'
FUNCTION = 'SET'
TYPE = 'TOP'
WINDOW = 'MAIN'
EXCEPTIONS
OTHERS = 8
Write ITEM_LINE
LOOP AT .....
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'ITEM_LINE'
FUNCTION = 'SET'
TYPE = 'BODY'
WINDOW = 'MAIN'
EXCEPTIONS
OTHERS = 8.
ENDLOOP.
Delete ITEM_HEADER from TOP area of main window
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'ITEM_HEADER'
FUNCTION = 'DELETE'
TYPE = 'TOP'
WINDOW = 'MAIN'
EXCEPTIONS
OTHERS = 8
Print CLOSING_REMARK
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'CLOSING_REMARK'
FUNCTION = 'SET'
TYPE = 'BODY'
WINDOW = 'MAIN'
EXCEPTIONS
OTHERS = 8
START_FORM function
CALL FUNCTION 'START_FORM'
EXPORTING
ARCHIVE_INDEX =
FORM = ' '
LANGUAGE = ' '
STARTPAGE = ' '
PROGRAM = ' '
MAIL_APPL_OBJECT =
IMPORTING
LANGUAGE =
EXCEPTIONS
FORM = 1
FORMAT = 2
UNENDED = 3
UNOPENED = 4
UNUSED = 5
SPOOL_ERROR = 6
OTHERS = 7
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
END_FORM function
CALL FUNCTION 'END_FORM'
IMPORTING
RESULT =
EXCEPTIONS
UNOPENED = 1
BAD_PAGEFORMAT_FOR_PRINT = 2
SPOOL_ERROR = 3
OTHERS = 4
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CONTROL_FORM function
The CONTROL_FORM function module alows you to create SapScript control statements from within an APAB program.
Syntax:
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
command =
EXCEPTIONS
UNOPENED = 1
UNSTARTED = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Example:
Protecting the text element ITEM_LINE
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
COMMAND = 'PROTECT'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
TEXELEMENT = 'ITEM_LINE'.
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
COMMAND = 'ENDPROTECT'. -
What are the roles & responsibilities of SAP MDG Functional Consultant?
Dear experts,
Please explain What are the roles & responsibilities of SAP MDG Functional Consultant?
Regards
Adhi,Hello Adhi
There is no limit to explore in MDG. As a functional consultant you are responsible for -
1. Defining scope of MDG
2. Set up governance process - Workflow
3. Configuration - MDG (Activate services - functions / role set up / Data modelling / process modelling / replication set up ) - You have to involve in each of these activities with technical. You can also do it on your own.
4. Testing - end to end testing and training
5. Cut over activities - data load etc
In these areas, you have to contribute 100% and work with entire team (tech) for set up.
As mention, you can explore a lot in MDG.
Kiran -
Whats the functional difference between user IDs SAP* and DDIC?
Whats the functional difference between SAP* and DDIC? Can any one tell me please. I am new here. Thanks in advance.
Hi Farooq,
There are three user IDs in various SAP clients.
1. SAP* (Client 000 and 001)
SAP* denotes the default super user and has all administrative powers.
2. DDIC (Client 000 and 001)
DDIC user is responsible for the maintenance of the ABAP/4 Dictionary and the software logistics.
3. EarlyWatch (Client 066)
The EarlyWatch user has access only to monitoring and performance data.
Please check this link for more information on data dictionary objects.
http://help.sap.com/saphelp_webas620/helpdata/en/cf/21ea31446011d189700000e8322d00/content.htm
Hope this will help.
Regards,
Ferry Lianto
Maybe you are looking for
-
Weather bug in iOS 7.1.1
When I click on weather in otification, a white bar comes on left side for just 2 sec. Also when I close the app, it does the same.
-
G6, 3.5 mm jack not working
i have connect an external speaker in my notebook but no response from notebook , please help ????
-
Hello, I am using a outbound IDOC and at the end of IDOC generation want to know number of IDOC generated. I have used message S644(ZSD) for that, but how to write logic to get number of IDOC generated. I am using MASTER_IDOC_DISTRIBUTE FM. Thanks
-
BOR object cannot use function module as method
Hi All, I have a function module with an import parameter referring to data element DE_ABC. BOR indicates that it doesn't support this data type. However, if I define a DB table with a field whose type is DE_ABC and use that field as reference in FM
-
I can not file my E-mails, what is wrong?
Dear sir/madam, When I want to file an E-mail I get the following message: Warning! It is not succeded to file this message. Check your filename and try later. This is strange. I use thunderbird for many years. My imporant E-mails I always file in th