Whats happened to my firewire???????

I haven't used my DV camcorder for a while but when I came to download some baby footage, my camera couldn't be seen by the computer. When I went to ' about this computer - more info - firewire, it used to have info on speed etc. but now it has nothing apart from Firewire Bus. What has happened? Can anyone help or point me in the right direction? Thanks guys.

Thought you could use this info about getting FireWire to work!
First, you should always Repair Permissions in Disk Utility before and after any update; I would do that now. If you installed your update with FireWire plugged in, your Mac may not recognize it anymore.
Try resetting your FireWire ports by disconnecting all FW devices, shut down your Mac and unplug it from AC power (wall socket) for 30 minutes. plug it back in and try FW.
If that didn't work, download the combo update from this site (yours may be corrupt), not Software Update, disconnect all firewire + USB devices except keyboard + mouse, Repair Permissions, re-install update, Repair Permissions again + try. Yours is the 10.4.10 Combo update ( PPC, not for Intel systems). Others reading, download the Combo that applies to your system.
If that still didn't get it Zap the PRAM. While restarting Mac hold down the following key combo Command-Option-P-R. Keep holding those keys down till you hear the second start-up chime, then release.
For those of you with Macs that are not PowerBooks or iBooks, a bad internal battery can cause FireWire to not be recognized, so make sure it's good!
Good Luck!
Cheers!
DALE

Similar Messages

Vanishing Firewire drive - anyone know what happened?

The power went out for a moment earlier today, and when it went back on (and I rebooted) my external firewire drive did not mount.
I turned everything off, waited a couple of hours - same thing. I repaired permissions - nothing. Finally, I moved the input into the other firewire port, and the drive mounted and everything works again.
Anyone have any idea what happened here? I'd like to think the machine just got confused somehow and wouldn't mount rather than something nasty happening to the firewire port. Thanks

So have you tested the Firewire port to which the drive was originally connected? Is it OK now? Or is it dead?
You posted a similar story about a "disappearing" firewire drive back on 4 MAY 2006. Is this the same drive? Did you resolve the previous problem? Have you spoken with Tech Support?

My old Intel-Based iMac is no longer recognizing USB wired input devices; it only recognizes Bluetooth. What happened?

My friend's old Intel-Based iMac is no longer recognizing USB-wired input devices (Kensington TrackBall, Logitech Mouse) plugged into any USB slot at the back of the computer.
They were working before and for many years.
All of a sudden, A pop up window came up. IT said no Bluetooth mice could be found. We don't know what set off that window to pop up and look for a WL mouse. It never has before in the 5 or more years my friend has been using this computer.
I supplied a wireless Apple mouse and his is back running again.
But want to know why his USB-input devices (Except his keyboard) are not being recognized. He would prefer to use his Trackpad (Wired), but can't find anything in SYstem PReferences to allow that. The computer only seems to want a Bluetooth input device.
Anyone have an idea what happened and if this can be reversed?
I think he is still running Mac OS X 10.5.8.

Hi Carol, lets try this...
reset FW bus, same goes for USB reset...
Reset the Firewire bus
If your Firewire or USB isn't recognizing any device. A solution which has worked for some whose hard drive became invisible in 10.4 was simply to follow these four steps to reset the Firewire/USB bus:
1. Shut the machine down.
2. UNPLUG the power lead to the computer and any firewire/USB drive/devices.
3. leave it for 10 minutes.
4. Connect back up and reboot.
http://www.macmaps.com/firewirebug2.html

After running Software update, I can no longer run, open, sync or use iTunes in any way. PLEASE what happened??

I was running the newest version of Snow Leopard, and after running Software update, I can no longer run, open, sync or use iTunes in any way. PLEASE what happened?
I really regret that I said "OK" to Software Update message... after Software Update of these updates on 7-26-11:
Migration Assistant Update for Mac
Mac OSX 10.6.8 Supplemental Update
Safari
iTunes
Remote Desktop Client Update
Now I get a message:
iTunes cannot be opened because of a problem
Check with developer to make sure iTunes works with this version of Mac OSX. You may need to reinstall the application. Be sure to install any available updates for the application and Mac OSX.
Process:         iTunes [5092]
Path:            /Applications/iTunes.app/Contents/MacOS/iTunes
Identifier:      com.apple.iTunes
Version:         ??? (???)
Build Info:      iTunes-10315501~1
Code Type:       X86 (Native)
Parent Process: launchd [111]
Date/Time:       2011-07-26 12:08:18.568 -0500
OS Version:      Mac OS X 10.6.8 (10K540)
Report Version: 6
Interval Since Last Report:          504736 sec
Crashes Since Last Report:           20
Per-App Crashes Since Last Report:   13
Anonymous UUID:                      B8B5EE28-970A-4E79-949B-EA2DD6E6DAA2
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: @loader_path/libgnsdk_musicid.1.8.2.dylib
Referenced from: /Applications/iTunes.app/Contents/MacOS/iTunes
Reason: image not found
Binary Images:
0x8fe00000 - 0x8fe4162b dyld 132.1 (???) <A4F6ADCC-6448-37B4-ED6C-ABB2CD06F448> /usr/lib/dyld
Model: Macmini3,1, BootROM MM31.00AD.B00, 2 processors, Intel Core 2 Duo, 2.26 GHz, 2 GB, SMC 1.35f1
Graphics: NVIDIA GeForce 9400, NVIDIA GeForce 9400, PCI, 256 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x90), Broadcom BCM43xx 1.0 (5.10.131.42.4)
Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: Hitachi HTS543216L9SA02, 149.05 GB
Serial ATA Device: OPTIARC DVD RW AD-5680H
USB Device: External HDD, 0x1058 (Western Digital Technologies, Inc.), 0x0704, 0x24100000 / 2
USB Device: Hub, 0x0424 (SMSC), 0x2507, 0x26400000 / 2
USB Device: iMic USB audio system, 0x077d, 0x07af, 0x26440000 / 4
USB Device: Hub, 0x0424 (SMSC), 0x2502, 0x26470000 / 3
USB Device: Deskjet D4300 series, 0x03f0 (Hewlett Packard), 0x1f04, 0x26471000 / 5
USB Device: GD-0608-U, 0x056a (WACOM Co., Ltd.), 0x0021, 0x04700000 / 4
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x04500000 / 3
USB Device: Hub in Apple Pro Keyboard, 0x05ac (Apple Inc.), 0x1003, 0x04300000 / 2
USB Device: Apple Optical USB Mouse, 0x05ac (Apple Inc.), 0x0307, 0x04310000 / 6
USB Device: Apple Pro Keyboard, 0x05ac (Apple Inc.), 0x020b, 0x04330000 / 5
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000 / 2
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8216, 0x06110000 / 5
FireWire Device: unknown_device, Unknown
FireWire Device: d2 DVDRW FW, LaCie, Up to 400 Mb/sec

Same thing happened to me and I get the same error message. These are the programs that don't work
mail
keynote
pages
all Office 2011 programs
safari

With my taking any action, my folders and files no longer appear under documents (under Places). Now a folder titled Documents has appeared on my desktop with all my files and folders. What happened?What happened?

With my taking any action, my folders and files no longer appear under documents (under Places). Now a folder titled Documents has appeared on my desktop with all my files and folders. What happened?What happened?

The way I moved from 10.3.9 to 10.5.8 was to use "ditto -rsrc" and copy the user homes and the data share to an external firewire drive. Then did the same in reverse.
I found the key to data and share permissions to make sure that the users had the same UID in Leopard that they had in Panther.
You can then use "sudo rm -rf" to remove any folder from the relocated homes that you want. Remember if you do choose to remove "~/Library" from each users relocated home, you will be removing any iCal calendars, login.keychains, browser bookmarks, custom screensavers and wallpapers, etc.
Users don't really care if they can login and do any work. But there will be much wailing, gnashing of the teeth, and anxiety, if they lose their bookmarks and wallpaper.

What happens if you try Target Disk Mode?

Has anyone tried booting up the new MB's (those without a FW port) while holding down "T" to see what happens? Does the FW logo appear?

Without Firewire I can't use any of my HD cameras to load footage into FCP or onto the MB's hard drive. USB is on the cameras but only supported under Windows. Everything I shoot is true HD (not HDV or AVCHD) and because Apple has decided to drop teh FW port on the MB I'll be forced to buy a MBP just because it has a FW port and I'll have to get a FW400 to FW800 adapter for an additional $8 to $30 which ends up essentially being a Firewire Tax of $708 to $730 just to get my tapeless workflow, flowing.
My FireStore drives are useless without a FW port as are many (most in fact) of my external HDs. I can't use the MB in TDM to load footage onto, copy off of or even dump footage directly from a P2 card reader or even one of my cameras. Without firewire I simply can't work.
Apple touted FW as the next big thing, FW3200 is on it's way, sony has iLink, many Pro cameras can only work with Macs via FW so without a FW port a MB is literally useless to me. I'm just upset that if I wanted to upgrade today, or had to, or had to bring more edit stations on the road or on location I'd be forced to pay an additional $700+ just to make each one as compatible as the previous model. As well as forced to carrying around a heavier and larger laptop with essentially the same graphics capabilities as the MB (since the MBP can't use both graphics systems at once which is an Apple limitation not Nvidias). You can't really edit HD over USB either due to the different technologies between FW and USB.
USB to FW adapters don't work in this workflow and while an express card with FW ports would, the MB is lacking that as well. Apple has chosen to alienate some customers while forcing others to pay this Firewire Port Tax.
Having owned Macs and Apple products since my Apple ][, and owning stock since it was $14 a share when Steve dropped the "i" from his iCEO status I'm, for the first time, truly disappointed and a little angry at Apple.
For my company it is that bad. The next portable upgrades we do we will have to factor in $700+ times the number of laptops we want or need. For every two MBPs we'd buy we could almost get an extra MB with the firewire tax. I'm not paying $700 for a port that's been standard for a while now, especially since Apple invented Firewire.

Interrupting Time Machine - what happens?

I hooked up my Drobo last night and designated it as my TM back-up drive. My Dual 2.5 G5 finished up fine. I also started TM on my MacBook through my Airport Extreme. This morning, my MB has 15GB of backup to do, and I need to go to work. What happens if I interrupt this backup? Will it pickup where I left off tonight, when I get home? What happens? Thanks!

I started TimeMachine today and backed up my iMac directly over firewire 800. Now we have been able to connect my husband's MacBookPro over the wireless and it is also backing up to a different partition on the same FW drive attached to the iMac. It is very slow, though.
My question is, I would like to interrupt the backup on the Book so I can connect it to an ethernet line so it will go faster. Will it start over from the beginning or pick up where it left off?

What happens on iCloud (ex. contacts) when multiple family members use the same Apple ID?

What happens on iCloud when multiple family members use the same Apple ID? For example if we all choose to use iCloud for contacts, are they all merged together? We use the same Apple ID so we can use find my iPhone to keep track of the whole family.

Of course if you are both connected to the same iCloud account you have the same contacts - what did you expect?. The contacts live on the server and are read from there by the devices; so as you've both managed to sync your contacts up to iCloud they are now inextricably mixed. You can only delete your contacts by deleting individual ones, and doing that will delete them from your phone as well.
You can only unravel this by
1. In the iCloud contacts page at http://icloud.com, select all the contacts, click on the cogwheel icon at bottom left and choose 'Export vCard'.
2. Sign out of System Preferences>iCloud
3. Create a new Apple ID and open a new iCloud account with it for your own use.
4. Import the vCard back into the iCloud contacts page.
5. Go to http://icloud.com and sign in with the original ID. This is now his ID. Work through the contacts individually deleting the ones you don't want him to have. When done sign out and advise him to change his password.
6. Go to the new iCloud account and delete his contacts individually.
Of course if you have also been syncing calendars and using the same email address there are problems with doing this.

What happens to the open item in bsid table when it is cleared

hi experts,
i have a doubt about open and cleared items of accounting documents. as we know open items of customers are stored in bsid and cleared ones in bsad. For suupose, an open item is closed ina particular period then what happened to the entry in bsid and bsad table. an entry regarding is stored in bsad (cleared),and what happens to the entry in bsid, still it will be there or removed from it.

Hi,
When ever we clear the document(Complete payment) that document will be moved to BSAD table. Other wise it will remain in BSID.
If u are making partial payment then all the partial payment documents along with original document will be stored in BSID till u made the complete payment for that invoice.
Assumption is u have to give all partial payment documents made for particular invoice item while u are making complete payment in F-28 transaction. So that these partail payment documents will also be cleared while making complete payment and moved to BSAD table.
This trasaction can be used for both partial and complete payments.
Irrespective of complete or partial payments made all the documents will remain stored in BKPF and BSEG tables.
BSID and BSAD are index tables to address performance issues with BKPF and BSEG tables.
So all open and cleared documents will be there in BKPF and BSEG tables.
All cleared documents will be there in BSAD table.
Alll open documents will be there in BSID table.
Hope it is clear.
Thanks,
Vinod.

I found My iPhone contacts on my friends Iphone we both have 4s! But we use the same apple ID and ICloud ID! How can undo what happened? all my private stuff is now on his phone!!! help me plz!!?

I found My iPhone contacts on my friends Iphone we both have 4s! But we use the same apple ID and ICloud ID! How can undo what happened? all my private stuff is now on his phone!!! help me plz!!?

Of course if you are both connected to the same iCloud account you have the same contacts - what did you expect?. The contacts live on the server and are read from there by the devices; so as you've both managed to sync your contacts up to iCloud they are now inextricably mixed. You can only delete your contacts by deleting individual ones, and doing that will delete them from your phone as well.
You can only unravel this by
1. In the iCloud contacts page at http://icloud.com, select all the contacts, click on the cogwheel icon at bottom left and choose 'Export vCard'.
2. Sign out of System Preferences>iCloud
3. Create a new Apple ID and open a new iCloud account with it for your own use.
4. Import the vCard back into the iCloud contacts page.
5. Go to http://icloud.com and sign in with the original ID. This is now his ID. Work through the contacts individually deleting the ones you don't want him to have. When done sign out and advise him to change his password.
6. Go to the new iCloud account and delete his contacts individually.
Of course if you have also been syncing calendars and using the same email address there are problems with doing this.

UCCX 7.0.1SR5 to 8.0 upgrade while also adding LDAP integration for CUCM - what happens to agents and Historical Reporting data?

Current State:
•    I have a customer running CUCM 6.1 and UCCX 7.01SR5. Currently their CUCM is *NOT* LDAP integrated and using local accounts only. UCCX is AXL integrated to CUCM as usual and is pulling users from CUCM and using CUCM for login validation for CAD.
•    The local user accounts in CUCM currently match the naming format in active directory (John Smith in CUCM is jsmith and John Smith is jsmith in AD)
Goal:
•    Upgrade software versions and migrate to new hardware for UCCX
•    LDAP integrate the CUCM users
Desired Future State and Proposed Upgrade Method
Using the UCCX Pre Upgrade Tool (PUT), backup the current UCCX 7.01 server.
Then during a weekend maintenance window……
•    Upgrade the CUCM cluster from 6.1 to 8.0 in 2 step process
•    Integrate the CUCM cluster to corporate active directory (LDAP) - sync the same users that were present before, associate with physical phones, select the same ACD/UCCX line under the users settings as before
•    Then build UCCX 8.0 server on new hardware and stop at the initial setup stage
•    Restore the data from the UCCX PUT tool
•    Continue setup per documentation
At this point does UCCX see these agents as the same as they were before?
Is the historical reporting data the same with regards to agent John Smith (local CUCM user) from last week and agent John Smith (LDAP imported CUCM user) from this week ?
I have the feeling that UCCX will see the agents as different almost as if there is a unique identifier that's used in addition to the simple user name.
We can simplify this question along these lines
Starting at the beginning with CUCM 6.1 (local users) and UCCX 7.01. Let's say the customer decided to LDAP integrate the CUCM users and not upgrade any software.
If I follow the same steps with re-associating the users to devices and selecting the ACD/UCCX extension, what happens?
I would guess that UCCX would see all the users it knew about get deleted (making them inactive agents) and the see a whole group of new agents get created.
What would historical reporting show in this case? A set of old agents and a set of new agents treated differently?
Has anyone run into this before?
Is my goal possible while keeping the agent configuration and HR data as it was before?

I was doing some more research looking at the DB schema for UCCX 8.
Looking at the Resource table in UCCX, it looks like there is primary key that represents each user.
My question, is this key replicated from CUCM or created locally when the user is imported into UCCX?
How does UCCX determine if user account jsmith in CUCM, when it’s a local account, is different than user account jsmith in CUCM that is LDAP imported?
Would it be possible (with TAC's help most likely) to edit this field back to the previous values so that AQM and historical reporting would think the user accounts are the same?
Database table name: Resource
The Unified CCX system creates a new record in the Resource table when the Unified CCX system retrieves agent information from the Unified CM.
A Resource record contains information about the resource (agent). One such record exists for each active and inactive resource. When a resource is deleted, the old record is flagged as inactive; when a resource is updated, a new record is created and the old one is flagged as inactive.

New Data in R/3 Enterprise - ABAP Proxies - XI what happen?

Hi,
i have a theoretical question:
if i use R/3 Enterprise on WAS and put new Data in the R/3 System and transport them to XI with ABAP Proxies. What happens in the systems?
How do the R/3 System put new data in the proxy runtime and send them to xi?
I want to unterstand how the transport from new data in a R/3 System with ABAP Proxies comes to the XI Integration Server.

Hi Marcel,
>>>>>How do the R/3 System put new data in the proxy runtime and send them to xi?
all you need to do in r3 is to fill tables of a generated structure
and execute one method of a generated class (send....)
then R3 will connect over HTTP to XI and send the data from your structures
structures and class in R3 is being generated automatically via TCODE SPROXY
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

What happen if i use controll break statement in between select & endselect

Hi all,
what happen if i use controll break statement in between select & endselect ?
Thanks in Advance
KR

Hi for reference u can go through this code example
data:
fs_tab like sflight.
data:
   t_tab like standard table of fs_tab.
   select * from sflight into table t_tab.
   loop at t_tab into fs_tab.
     write: / fs_tab-carrid.
   endloop.
   refresh t_tab.
   clear fs_tab.
   select * from sflight into fs_tab.
     at new fs_tab-carrid.
       append fs_tab to t_tab.
     endat.
   endselect.

HT5624 What happened to all my library? I don't have an Iphone only an Ipod. But only my recent purchases show up on my computer. How do I get them back?

What happened to my entire 3000+ songs in my library I used to see when I opened iTunes? I only see the most recently purchased. How do I get them back? I don't have an I phone to play they on, only a droid.
Pammie49

Hi Sarah,
It sounds like the songs have either not yet synced over to the iPhone, or something went wrong when attempting to sync to the iPhone. My recommendation is to uncheck the "Sync Music" checkbox.
Once you have done that, recheck the "Sync Music" checkbox, and apply the changes once more. This will instruct iTunes to completely remove all music from your iPhone, and then copy the files once more. If you have a large amount of music, this initial sync may take a while.
If the above does not resolve your issue, see the following articles:
iOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
iOS: How to transfer or sync content to your computer
http://support.apple.com/kb/HT1296
Thanks,
Matt M.

I erased an iphone on find my iphone , so i wanted to know what happened and I erased my without a sim card and now I says I cant go on it until i put in a sim card. Did i ruin the phone please help thanks.

I erased an iphone on find my iphone , so i wanted to know what happened and I erased my without a sim card and now I says I cant go on it until i put in a sim card. Did i ruin the phone please help thanks.

You did not ruin the phone, you will need a sim card to activate the phone and then connect the phone to itunes and do a restore from back up.
http://support.apple.com/kb/HT1414

Whats happened to my firewire???????

Similar Messages

Maybe you are looking for