Whats happening internally within the unflatten from string function?

I am getting unflatten from string error intermitently in my program. I can't post the program to get help but essentially I am storing a GOOP object reference as a string. The reference is flattened to a string and stored upon creation, at a latter time the string is then unflatterned to retrieve the reference and then the data. This works most of the time but occansionaly the unflatterned from string function fails. Prior to passing the string to the function I am checking that the string isn't null. I am assuming something else is corrupting the string prior to passing to this fucntion and would like to know what would trigger the error in the function as it may help me realise what is happening
prior.
Cheers,
Wayne

Hi,
It really seems strange this problem, but one thing that might be the cause is how you store the flatten string. You do not mention that. I have once had problems when storing GOOP references as a sting and passing them between test VIs in TestStand using a string parameters in TestStand. A flatten string might have special chars that not all applications (such as TestStand parameters) can handle that and just trunkate the string when such a char is present, mistakenly inteprets that as end of string. Have you tried to check that string length is the same?
However to make sure you get rid of all problems with string termination, you really should cast your GOOP reference into something else. I would instead cast the reference to an U32, or
if you want, to solve the string problem for other types than GOOP reference, then flatten the type into string and then convert the string to an array of U8 before storing it. This would by sure solve your problem.
Regards,
Mattias Ericsson
Endevo
Sweden
Main developer of the new GOOP2 and GOOP Wizard 3.
PS! Have you seen that there is a new GOOP release that also may handle inheritance? Please check out: http://www.endevo.se/default.asp?lang=eng and click on "Products". There are examples, demos and white papers describing the new GOOP Inheritance Toolkit.
Attachments:
CastRefExample.vi ‏18 KB

Similar Messages

  • Is there a way to scan a string containing % (percent symbols) using the "Scan from String" function?

    I am communicating serially with a chilled mirror device and the input string syntax contains this text: "%RH=<input value>"
    I have not been able to figure out how to tell the function that the percent here is not a format specifier. Is this possible, or should I just try to use a different function?
    Thanks.
    Mitch
    Solved!
    Go to Solution.

    Use %% in your format string so that it knows to use the percent literally.  So %%RH=%f
    EDIT:  Darin got one in there ahead of me.  It looks like either \% and %% both work.
    Attachments:
    Example_VI.png ‏10 KB

  • How does "Unflatten From String" take a type and return a value of that type?

    http://zone.ni.com/reference/en-XX/help/371361E-01/glang/unflatten_from_string/
    How exactly does the "type" argument for "Unflatten From String" work? I need to create a VI that takes a type, passes it as an argument to several calls of the "Unflatten From String" function, and returns an array containing elements of the type originally passed. The "Unflatten From String" function seems to do some magic though, because the type of the "value" that it outputs changes depending on the type it is passed as input. How do I do the same magic in my VI?
    Ultimately, what I need to accomplish is an unflatten-list operation. Given a type T and a byte string of length L (which contains a concatenation of T elements that are flattened to their bytes), create a VI that unflattens all the types in the string and return an array of length (L / sizeof(T)) that contains each type.
    Note: performing the unflatten-list operation is trivial, but I cannot for the life of me figure out how to do it in a VI that takes a type and returns an array of the appropriate type. By the way, my data is being given to me from another source, so please don't bother suggesting that I should be flattening an array using LabVIEW's "Flatten To String" function in the first place. My data is not given in LabVIEW's array format: http://zone.ni.com/reference/en-XX/help/371361B-01/lvconcepts/flattened_data/
    Thanks a ton!
    -Wakka

    Take a look at this example:  You can see that the flattened string contains several bytes.  The first four bytes contain the length of array (number of elements).  Since the data type is U32, the next 32 bits (4 bytes) contains the value of the first element, and so on.  Could you possibly use this scheme to do what you want to do?  Other data types present different outputs.  You would have to experiment with them.
    - tbob
    Inventor of the WORM Global

  • What is the Scan from string pattern for "match everything" ?

    Hello,
    Using Scan from string for a while, I know that %s only matches string up to a whitespace. And I also thought %[^] would match everything including whitespaces. But it turned out that it would stop at the closing square brace.
    So, what is the real scan pattern for match everything including whitespaces ?

    What do you want the Scan From String to end on?  Or are you just grabbing the rest of the string?  If that is your scenario, then just use the "remaining string" output.  It might help if you give a full example of a normal input string and EVERYTHING you want as an output.

  • Error 74 Unflatten from String in video streaming using TCP

    I am working on video streaming ( source: USB camera) using TCP. However, am constantly getting held up in "Unflatten from String" with Error 74 occuring stating "Memory corrupt". Kindly help me through in solving the issue.
    Attached is the VI having both the send/ recieve together and communicating using localhost. 
    Attachments:
    Image acquisition & transmit.vi ‏189 KB

    Shoaib Akhtar wrote:
    Thanks  for the reply!
    Restricting the TCP sent dta to two bytes was a mistake, that has been rectified.
    However, we are unable to resolve the "Unflatten from String". their just doesn't seem to be any sub-VI or function, that I can find which could convert the string to IMAQ image!
    Kindly help in the same!
    Best. 
    Actually at least in earlier versions of IMAQ the normal Unflatten from string should be able to createthe IMAQ image when you transmit the right data. You can try that by writing the string from IMAQ Flatten.. to a file and reading it back and unflattening. If that works, you know you are making some errors in the TCP communication.
    Message Edited by rolfk on 01-11-2010 08:37 AM
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

  • What happened to all the 3G iPhone posts?

    What happened to all the posts from people who said they had the new iPhone and liked it so much better than the original?
    I think it's funny that they were talking like they had the phone in-hand, blah blah, but now all of those posts are gone...?

    I knew that, just thought it was funny. They almost had me believing it was out until I saw the announcement for July 11.

  • Bug in "Unflatten from String" (LV7)

    I have binary files with different versions of a certain datatype. When loading a file, I try to unflatten the data using the newest dataversion. If I get an error, I try the 2nd newest dataversion and so on until I found the right datatype. This methode was ok up to LV6.01.
    Now I updated to LV7.0ger and I found following bug:
    When unflatting certain binary datas from string I get an error msg window "Nicht genügend Speicher zum Abschließen dieser Operation". The error-output of the vi is incorrect.
    Does anybody know a workaround of that bug?
    You can test the bug with the attached vi. Include also the two typedefs.
    Attachments:
    f_mancalib_UnflattenTypeCalibList.vi ‏184 KB
    f_mancalib_TypeCalibrationParams.ctl ‏24 KB
    f_mancalib_TypeCalibrationList.ctl ‏28 KB

    Hi,
    From the LV's help: "National Instruments recommends reworking any
    application that uses the Convert 4.x Data mode as a long term solution.".
    Data types may vary with differenct versions of LabVIEW. So, if types are
    not the same, this does not need to be a bug. Right click the Unflatten From
    String, and select Convert 4.x Data. This might not work, because the data
    is stored with Lv 5 or 6, but when you get it working, it will keep working
    for future versions of LV.
    The attached VI shows that a sting in a cluster does not convert to the same
    type string for lv4.x and lv7. Perhaps they are the same for lv4.x and lv6.
    If so, using convert 4.x data would be sufficient. If not, you need to read
    the data in 6, save the binary 4.x strings
    , and use 4.x from then on.
    You might also do the following: (also from the help) "If you use this
    function to flatten data from a custom control or indicator that you saved
    as a type definition, the function strips the type definition of its type
    definition wrapper. If you do not want to strip this wrapper, right-click
    the function and select Expose Typedefs from the shortcut menu."
    Regards,
    Wiebe.
    "albertz" wrote in message
    news:[email protected]..
    I allready told this to a NI tech support in Germany. They told me,
    the bug is known, but they do?nt have a workaround.
    So I hope for LV7.1 or maybe LV7.01.
    [Attachment Different Types.vi, see below]
    Attachments:
    Different_Types.vi ‏22 KB

  • I have a question. I don't know what happened, but my safari went from regular safari with google and now everything is yahoo. maybe it was firefox or something. I just want the regular safari back. Can someone help me?

    Frustrated!!!!!!,
    I have a question. I don't know what happened, but my safari went from regular safari with google and now everything is yahoo. maybe it was firefox or something. I just want the regular safari back. Can someone help me?

    Check the links below for options to remove the Adware.
    The Easy, safe, effective method:
    http://www.adwaremedic.com/index.php
    If you are comfortable doing manual file removals use the somewhat more difficult method:
    http://support.apple.com/en-us/HT203987
    Also read the articles below to be more prepared for the next time there is an issue on your computer.
    https://discussions.apple.com/docs/DOC-7471
    https://discussions.apple.com/docs/DOC-8071

  • CRIO: Unflatten from string into lvclass not working in deployment

    Hello,
    I am working on a problem for some hours now and I need some help.
    I am using a cRIO-9022. I need to do some tasks, and I created a couple of classes which contain the parameters and the methods. They contain using dynamic dispatch VIs. I have an array of these classes (all derived from a parent class) which is my "configuration". I am using "flatten to string" and saving those file on disk. "Unflatten from string" is working fine. These file is created on a LV WIndows Application.
    I need to use this file on my cRIO: Unflatten from string, and then work with the array of my classes. When running the cRIO Main VI it's working fine. But when building the application and deploying it as startup, it's not working. I am getting:
    Error 1403 occurred at Unflatten From String in Gantry CommEngine.vi->RT Main.vi
    Possible reason(s):
    LabVIEW:  Attempted to read flattened data of a LabVIEW class. The data is corrupt. LabVIEW could not interpret the data as any valid flattened LabVIEW class.
    What I tried so far:
    - Added the whole lvlib containing the classes and also every single class to "Source files / always included".
    - Created constants of the array (containing the classes) to the VI (forcing LV to include the classes?)
    - Loaded the file from cRIOs flash and also by shared variable
    What else can I do?
    Thanks a lot for support!

    I tried to reproduce the matter, but couldn't. 
    I attached my example to the post. 
    What it does:
    It creates a class with only a string a bool and a number. This class oblect is saved to C:/somename.xml. The number is a random number.
    In the second case the same file is read and the number broadcasted to a variable.
    It worked quite fine building it as a startupexe.
    Nothing else was necessary. Does it work for you?
    Attachments:
    class exe.zip ‏45 KB

  • Unflatten from string takes long time to execute in x64

    Hi All,
    I am running into an issue where "Unflatten from String" is taking enormous amout of memory n time in LV 2012 SP1 x64 to execute. I pass in a NOT flattened string to this function and it consumes ~5 Gigs of memory and takes more than 10 minutes to execute it. On x86, it executes almost instantly.
    It only happens if the input is not a flattened string. 
    Is this a known bug?
    I have attached the vi here for you to see the problem. If you run it on x64, it might take more than 10 mins to execute and your system will be in a hung state. 
    Ritesh
    Attachments:
    Flat String to Data bug.vi ‏9 KB

    LVCoder wrote:
    With "x64" I meant LV x64. It executes instantly on LV x86 running on Win 64 bit but on LV x64 it takes like eternity. 
    I know it cannot unflatten it and I want it to return an error. My actual code can receive a flattened or NOT flattened string and I have a case structure which handles different strings differently. 
    Be careful with that terminology, it only applies to the Windows Operating System with respect to 32-bit and 64-bit processors.  There is no such thing as LabVIEW x64, or LabVIEW x86.  The property terminology is LabVIEW 32-bit (the most common one, most people use, even on 64-bit OS's since it is the most fully supported), and LabVIEW 64-bit (not commonly used, doesn't have full support of all add-on modules and toolkits, and is mainly only used by people who need LabVIEW to analyze very large datasets.)

  • Error 116 at Unflatten from string.....

    Hi I want to save and load the control values of
    the tab pages I am getting the following error
    "Error 116 occurred at Unflatten From String     
          Unflatten or byte stream read operation
    failed due to corrupt, unexpected, or truncated data."
      the attached is the VI can
    anyone tell me what is wrong ….thank you
    Attachments:
    save n load example.vi ‏70 KB

    All that you need to do is right-click on the Read from Text File and Write to Text File functions and uncheck "Convert EOL".
    Other comments:
    You should not hard-code the path inside the VI. Either place a front panel control to specify the path (perhaps with a default value set), or generate the path so that it is relative to the VI (such as being in the same directory as the VI).
    You are not wiring all your errors through so some errors can be lost.
    You do not need to have the VI open a reference to itself. If you delete the Open VI Reference function the code will still work.

  • What happens internally while loading master data and transaction?

    hello,
    What happens internally and which tables are used while loading master data and transaction?
    I have loaded the data in DSO, but i am not getting value of particular InfoObject after loading the data.
    I have executed Attribute change run also.
    Kindly explain ...
    Thanks,
    Sonu

    Hi,
    Master data,
    Material Indipendent data can be sent without any dependency.
    Material Dependent data sequence is as follow.
    Plant,
    MRP areas,
    Supply area,
    Material,
    MRP area material,
    planning material,
    ATP check,
    Purchase info recards,
    schedule agg,
    PPM or PDS (But before PPM or PDS  work center should send to apo) If PDS is sending then BOM should send before PDS.
    Transaction data.
    As per the business requirement what is planning in apo.
    Regards,
    Kishore Reddy.

  • My computer broke and i lost all files including ITunes. what happens to all the stuff purchased already. will this appear in itues when i download it agian? how can i save the music on my ipod and transfere it over to the new itunes?

    my computer broke and i lost all files including ITunes. what happens to all the stuff purchased already. will this appear in itues when i download it agian? how can i save the music on my ipod and transfere it over to the new itunes?

    Unfortunely, all movies and songs purchased in iTunes will be lost...you'll have to purchase them again! Any applications you've purchased, you can download again for free.
    Music Rescue is a program you can use to transfer any and all data (music, movies, pictures..) from your iPod to your computer, and iTunes.
    http://www.kennettnet.co.uk/products/musicrescue/

  • How do I unflatten from string to an array of strings in labwindows

    New to Labwindows so please forgive.  I am trying to use STM to read messages from an existing LabView program.  I am using ClientTCPCB from the example that came with the STM library, but it reads in doubles, I want to read in strings.  I can see that I have the correct number of elements in my receive buffer, but I can't figure out how to convert the receive buffer into an array of char arrays (or strings as it were) something like labview's "unflatten from string" with 1-d array of strings as the type.

    So I figured it out... from the lack of info on the web and forums I doubt it will be useful to anyone else, but will post a brief solution.
    So I dumped the raw bytes to a file to look at how they are packed.  The first 4 bytes (int) is the number of strings in the message.  The next 4 bytes (int) are the number of chars that follow, then the corresponding chars, sans any null term character, then the very next int would be the number of chars in the next string and so on and so forth.  So I ended up writing my own charArrUnflatten function.  Anyway, after all this I might try to recode everything to use network vars.  Cheers.

  • What happens internally when Delta is Initialized?

    Hi..All
    Can any one plz explain What happens internally when Delta is Initialized?
    And Can we Intialize delta, if delta load error flagged to INTIALIZE DELTA?
    With Regards
    Jonn

    Hi John,
    Delta Initialization sends all the historical data requested on the "selection screen" of the infopackage.
    After the initialization, you can do the Delta loads for the same selection. After the first historical load,
    delta loads bring in only the changes.
    This is what happens internally.
    With delta initialization, the system is preparing for an initial full load and later only the changes.
    If your delta initialization failed. You can delete the initialization. In your infopackage, on the top left hand
    corner, you will find Scheduler. Drop down the menu for Scheduler, Double click on "Initialization Options for
    source system". Select your previous delta initialization and delete it. The delete button is the trash can at the bottom left hand corner.
    This will delete your previous delta initialization. You can now initialize your delta again.
    You can also refereto the below link for further information.
    http://help.sap.com/saphelp_nw04/helpdata/en/80/1a65dce07211d2acb80000e829fbfe/content.htm
    Hope the answer was helpful.
    Regards,
    S.P
    *Assign points for Useful Answers*
    Message was edited by: S.P
    Message was edited by: S.P
    Message was edited by: S.P

Maybe you are looking for

  • Error while saving the request

    Dear all, When i am saving the request through transaction FKKORD1 transaction .I am getting the following dump.Please let me know how to resolve this issue. Runtime Errors         GETWA_NOT_ASSIGNED Date and Time          07.01.2010 13:40:12 Short t

  • Safari will not open. Every time I click it, an error window pops up.

    Safari is completely broken. Every time I click it an error window pops up and sends a report to apple. Not sure what to do. I've updated everything but nothing works.

  • How to update the data in sqlserver table using procedure in biztalkserver

    Hi, Please can any one answer this below question how to update the data in sqlserver table using procedure in biztalkserver while am using executescalar,typedprocedure getting some warning Warning:The adapter failed to transmit message going to send

  • Animation Preset not visible

    I've downloaded the Amortype preset from Mattrunks. I've copied it to the presets folder in the After Effects CC folder. When I search for the preset in the "effects & presets" window in AE, it's not visible. When I browse for the preset in Bridge, i

  • AppServ Control keeps mangling dateTime fields in WS tests

    I've deployed a web service that takes 2 dateTime fields as parameters. The format of the dateTime fields is xsd:dateTime (YYYY-MM-DDTHH:mm:ss.SSS). However, every time I type in a value in the datTime form field, and press the Invoke button, the AS