Whats the average temperature of my drive bay for my G5? Its at 1832F

Whats the average temperature of my drive bay on my G5?
The drive bay is running at 1832 degrees F.
I just installed two new hitachi 2Tb drives in both the drive bay A and B.
They are independently at 94 degrees F and 104 degrees F.
The computer sounds lauder then before I installed the new drives.
However my fans are running at a normal 1800rpms.
I dont remember if my average drive bay was around 1800degrees F
If it is high is it because the drives are faulty?
I carbon copied my original 1TB drive with my OS on it to my new 2TB drive... was a faulty copy? (resulting in OS X running my fans slow)
All help needed.
Message was edited by: clazz

any reason why the computer sounds louder?
think the two new drives are putting out louder noise?
same brand of drives Hitachi deskstars - 7200rpms just i upgraded from 1TB to 2TB.
Its like considerably louder.
I first thought it was my fans cause i thought the drivebay was runnign hot but when i noticed the rom on my fans are average i figured it had to be the drives

Similar Messages

  • Hello , please tell me whats the price of a screen and casing for a macbook pro 13inch.ty

    hello , please tell me whats the price of a screen and casing for a macbook pro 13inch.ty

    ds store's opinion will be right in some, but not all cases.
    That largely depends on eactly which year and MacBook Pro (e.g., 5,1 ) model you are talking about, as well as whether you are rather "handy" and can do the swap yourself.
    On older Macs, used complete screens are available on the secondary from machines that have died. Step-by-step photo-illustrated guides are also available for sources like ifixit.com. [Their motivation for providing these guides for free is that some readers will buy their parts to make the repairs themselves.]
    Newer Macs may be valuable enough that having Apple fix them may be cost-effective. A free appointment at the genius Bar (with no obligation to proceed with ANY repairs) can get you a quote to consider.

  • Explain in detail what the "Bookmark to Desktop add-on" is for? also...

    Please somebody explain in more detail, what the "Bookmark to Desktop add-on" is for? Why would someone want it , what's it about, how to make it work?
    Also, I can't find anywhere an answer to:
    how to move bookmarks around to other folders!
    using android phone.
    I'd also like to know: how can i create a new bookmark folder uing android.
    Thanks!

    From reading the extension page for "bookmarks to desktop" I'm not sure what it does. However whatever it did seems to be broken according to the comments on the extension.
    Arranging bookmarks is not possible in Android. You can set up Firefox Sync to manage bookmarks on the desktop side. The changes will sync back to Firefox for Android.
    https://support.mozilla.org/en-US/kb/firefox-sync-take-your-bookmarks-and-tabs-with-you

  • Whats the best but cheapest blue ray burner for G5 june 2004?

    whats the best but cheapest blue ray burner for G5 june 2004?
    any links to uk website or the suggest a name and i'll look it up

    This one for sure...
    Backwards compatible to SATA 1.5Gb/s or 3Gb/s systems.
    http://eshop.macsales.com/item/Western%20Digital/WD5002AALX/
    UK...
    http://www.amazon.co.uk/WD-Caviar-Black-WD5002AALX-internal/dp/B004DMFAJ2
    Jumper settings...
    http://wdc.cu

  • Who know what the jar package in html directory is for?

    I used ims 5.2 hotfix 1.25 before�B
    Now i update the hotfix from 1.25 to 2.14.
    I see there are five jar packages as so:
    html/SMIMEApplet.jar
    html/activation.jar
    html/bcprov-jdk14-122.jar
    html/card-win32.jar
    html/ldapjdk.jar
    html/mail.jar
    I want to know what the jar package in html directory is for because i have been used customized web interface!
    Now I need to use the original customized html directory to cover the html dir. But i donot konw whether it have any risks!
    Thanks!

    Hi,jay,
    Thank you for your replay!
    Now we have a problem the process httpd may be hang by chance.
    The users can not logon webmail, it show invalid user or password!
    In the http proxy logs, there are many error " proxy login failed".
    So we hope solve this problem by patch the new hotfix 2.14.
    In fact,we donot need the fix on web face,but we need a stable server backgroud!
    So, i don't know what the jar package in html directory is for?
    And any risk to server httpd process?

  • I needed a 2tb hard drive for my new iMac whats the best to work with time machine for around £100

    Any suggestions about the best 2 tb hard drive to work with my imac,compatible with time machine for around £100

    There is no such thing as "best" and "inexpensive", you either want one or the other but you cannot get both. IMHO I'd recommend OWC's Mercury Elite Pro (www.macsales.com) however because  you are on the other side of the pond you may want to consider a Lacie product. High quality, not cheap but good stuff for the most part.

  • Will the Sound Blaster Audigy 2 drive bay work with Audigy 2 ZS car

    As above,
    can the Audigy 2 dri've bay be used with the Audugy 2 ZS and if so, can everything on it be used?.
    Are all the connections and functions the same on both dri've bays(Audigy 2, Audigy 2 ZS)?

    Yes, they should work with eachother, but it is not officially supported.
    Cat

  • Better to use optical bay or drive bay for SSD?

    Just bought a mid-2012 MacPro.  Also purchased a Crucial 512GB SSD drive, which I intend to use for a boot drive.  I know that I can install the drive in one of the four slide out drive bays.  From what I can gather, it doesn't matter which bay I use, Mac will boot equally well from any of them.  My question is:  What about the second optical bay?  Is there any advantage to putting the SSD there?  (other than keeping another slot open for HDD?)  Have tried to research this a bit, but the model is brand-new, not a lot of info out there..  Mucho thanks!

    The model is not "new" it is just a tiny change in processor options, everything else is unchanged.
    To use in standard bays you need to use an adapter to fit. If you put it in the optical bay if you are like me, it will get moved, put on its side, so again, might want to 'tie it down."
    But it doesn't matter which location.
    With 512GB you probably are going to use it for much more than just the boot drive. Maybe Aperture or other libraries.
    As for research, there are products and reviews and Mac centric sites such as
    http://www.macperformanceguide.com - click on Articles & Topics

  • Number of drive bays for HP ENVY Notebook - 17t-k200 CTO

    I am receiving conflicting reports on the new HP Envy model.  Does it have one or two drive bays?
    This question was solved.
    View Solution.

    It has a single 2.5 inch bay and then an M.2 mSATA port. 
    Manual
    Pages 63 and 70.
    It is also one of the ones where access to the hard drive(s) or memory is major surgery. 
    If this is "the Answer" please click "Accept as Solution" to help others find it. 

  • Whats the difference between these two queries ? - for tuning purpose

    Whats the difference between these two queries ?
    I have huge amount of data for each table. its takeing such a long time (>5-6hrs).
    here whice one is fast / do we have any other option there apart from listed here....
    QUERY 1: 
      SELECT  --<< USING INDEX >>
          field1, field2, field3, sum( case when field4 in (1,2) then 1 when field4 in (3,4) then -1 else 0 end)
        FROM
          tab1 inner join tab2 on condition1 inner join tab3 on condition2 inner join tab4 on conditon3
        WHERE
         condition4..10 and
        GROUP BY
          field1, field2,field3
        HAVING
          sum( case when field4 in (1,2) then 1 when field4 in (3,4) then -1 else 0 end) <> 0;
    QUERY 2:
       SELECT  --<< USING INDEX >>
          field1, field2, field3, sum( decode(field4, 1, 1, 2, 1, 3, -1, 4, -1 ,0))
        FROM
          tab1, tab2, tab3, tab4
        WHERE
         condition1 and
         condition2 and
         condition3 and
         condition4..10
        GROUP BY
          field1, field2,field3
        HAVING
          sum( decode(field4, 1, 1, 2, 1, 3, -1, 4, -1 ,0)) <> 0;
    [pre]                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

    My feeling here is that simply changing join syntax and case vs decode issues is not going to give any significant improvement in performance, and as Tubby points out, there is not a lot to go on. I think you are going to have to investigate things along the line of parallel query and index vs full table scans as well any number of performance tuning methods before you will see any significant gains. I would start with the Performance Manual as a start and then follow that up with the hard yards of query plans and stats.
    Alternatively, you could just set the gofast parameter to TRUE and everything will be all right.
    Andre

  • How do I find out what the charges on my credit card are for? Where is the iTunes account to log into and check?

    How do I find out what the charges are on my credit card are for. Where is the iTunes account to sign in and check?

    Launch iTunes then select iTunes Store from the source list left side of the window.
    Click Sign In on the right side of the window just above Quick Links.
    Now click your account name.
    In the next window click See All to the right of Purchase History.

  • What the most stable quality 4gb (2x2gb) memory for the P6n SLi Platinum?

    Hi,
    I'm looking for the most stable and very good quality 4gb of ram for the P6N sli platinum MB - what make does everyone recommend for this board?
    I note that Kingston value ram is mentioned on the Approved list but I wanted something faster than the valueram?
    Does anyone have either G.Skill or super talent and if so how do they work?  Any other makes that you can recommend?
    I know that there have been issue swith 4gb of ram for Xp/Vista 32 bit systems but from what I am reading hopefully the next bios should resolve this ...?
    Thanks as this is the only item that's holding up my build now !

    I don´t know whats the most stable 4GB solution is, I only can tell you, that I use Micron/Crucial mamory for years and never had any problems.
    Actually in my new P6N-SLI Platinum are working 4 1GB dimms of crucial value ram ddr2-667 without problems.
    There is a new bois version 1.22 for the platinum which solved the 4GB problem of earlier bios versions.
    That was a bios problem and not a problem of the ram.
    Manufacturer as Gskill on their GBHZ6400 modules and OCZ on their 1066 SLI modules are using the same Micron chips called D9GMH which are on my values.
    They have great potential above the rated 667 speed. Cause i´m coming from germany and at the moment the prices of memory here are very cheap, a lot of people are thinking about upgrading their memory.
    All what I read about here in germany G.Skill, Mushkin(very expensive), OCZ, A-data, TeamGroup are the most reliable rams
    when it comes to high speeds and low latency modules.
    At least I recommend the Crucial Ballistix ddr800 if you are not able to handle special settings in the motherboard bios.
    And of course there are coming 2GB modules from most of the manufacturers, so you only need 2 modules for 4GB.
    It´s your choice...
    greetings from germany
    gonzos-revenge

  • What are the average temperatures a macbook pro should reach?

    Just wondering are the temperatures below normal for a four year old macbook pro? I am just a bit worried about it overheating!

    You needn't worry much because if you ever hit that temp the machine will shut down automatically. Certain activities such as watching movies, using Flash, playing some games can easily drive CPU and/or GPU temps into the 90s C. That would be considered high.

  • What is average battery life everyone is getting for the Zen Mic

    I just got my Zen Micro last Thursday. I'm concern about the battery life. I haven't fully tested the battery yet, but I'm estimating that I will only get about 6-7 hours for it. The advertised time was suppose to be as much as 2 hours. Now I know that depends on your usage (e.g. volume, bitrate of the file, play mode, etc.). What are other people getting? Thanks.

    My last test, I tried to be as natural as possible. That is: back light is on; shuffle mode is on; eq is on; volume is normal (at 4 to 6); I skip or go back to tracks; I fast foward; the contrast is at 50 percent; average bitrate (from 28 to 360); smart sound off; and other minor things that I can't remember. That test gave me only 7.5 hours.
    I think that is pretty modest usage. Any average mp3 user would do the same thing. Yet, I only got 7.5 out of the possible 2. I don't like the sounds of that.
    I'm running another test right now with the same conditions above, and I'll let you guys know what I get.

  • Does anybody know what the phrase can't find driver mean?

    I have a PowerMac 4,2 and it won't start up for me It goes to a black and white screen and has the words panic,and unable to find driver
    for this platform. Does anybody know what that means,and what do I have to do to fix it. Thank you and have a great day Dale

    It means you have likely installed something for Intel Macs that runs at startup that won't work with that Mac.  If you moved a hard drive with Mac OS X 10.6 or later on it to the Powermac, that would cause such a problem.  If you connected a hard drive with 10.6 or later on it on it that was running Target Disk Mode (booting the Intel machine holding the T key) to it, that would cause such a problem.  If you attempted to install 10.4.4 or later system specific disc on a hard drive that was designed for an Intel Mac, and moved it to that machine, that would cause such a problem.  If you attempted to install a GUID formatted partition hard drive as opposed to Apple partition map on the machine, that could cause such a problem.

Maybe you are looking for