Whats the best preset?

I am trying to understand the best presets to use at different times in Compressor (2) when trying to output not only to DVD (SD), but to the web as well. Can someone give some clearification as to what some of the presets are good for...or even a website/book to look more into this information.
I know that if I were to try and cram a couple hours of video onto a DVD, I would use the presets that are very clear in compressor (Best for 90 min / 120 min / etc...). What if I had a 3 min long video and wanted to compress for the best results. I would assume that if I used one of those presets (90 min / 120 min) it would compress it at a much lower bit rate and in turn would end up with more grainy video. I do understand a little biot about bit rates, but not a ton.
Please help me someone!

to get good video you are going to have to do some research on the filters available for you in compressor.
i totally freaked out with the preset thinking compressor was crap, but i settled down and did read the help given to me about the filters, and did some web research.
now i can take an hour video that is 4.5 to 7 gb in size and create a h.264 video from that video down to 200-270 mb in size, and the video is totally awesome. i really cannot tell the difference, and cannot see any mouse teeth in high movement scenes.
if you have large video file that is long i would set the markers to a 1 minute or 30 sec clip with a lot of movement, and then experiment with the filters, and other settings. exporting that 30 seconds of my full length video until i got the results that i wanted. then save that setting as your own preset.
it just takes some trial and error. there isn't a wonder setting. i know from experience. it took me about 4 days to get 3 personal presets worked out for myself

Similar Messages

  • What is the best preset for Panasonic Ag-AC8P?

    I teach digital video and use Panasonic AG-AC8P. What is the best preset to use for this camera? Thanks

    Thank you for the response.
    In reading these I realized my original question was unclear as I was in a hurry. Getting the sequence to match the clips isn't an issue, but when we import clips from that camera and play them in the source monitor, it lags very badly. Can this be solved by using the proper preset in project setup? Or does the sequence preset even matter when playing from the source monitor. One we get it into the timeline and rendered there isn't an issue, only when trying to play from the source monitor (for example when setting in and out points).

  • Whats the best settings for exporting a three camera youtube video on a mac book pro

    I need help figureing out Whats the best settings for exporting a three camera youtube video on a mac book pro. I use 15 or 30 fps and aI cant figurwe it out [please help

    chucknoris501
    What version of Premiere Elements are you using on Mac?
    Export your Timeline content to a .mp4 file, using export settings which have been customized under the Advanced Button/Video Tab of the export's preset.
    See Publish+Share/Computer/AVCHD and .mp4 category. The exported file is then uploaded to YouTube at the YouTube web site.
    If you post the properties of your source video and project settings, I will suggest the settings for the Timeline content export to file saved to the computer
    hard drive for upload to YouTube at the YouTube web site.
    ATR

  • HT3819 I have 2 Ipod touch's, one a 64gb and one an 8gb.  Whats the best way to use them both on the same itunes account?

    I have 2 Ipod touch's, one a 64gb and one an 8gb.  Whats the best way to use them both on the same itunes account?

    Click here for options.
    (64410)

  • Whats the best way to backup my iphone?

    Hello. I am brand new to iphones....actually to apple anything. Never owned an apple product.  I dont quite understand the whole itunes/icloud thing at all and I was hoping someone could explain it to me.  All that I wish to accomplish is make sure all of my stuff on my iphone(apps, pics, music, etc) is backed up regularly and in the event that my iphone is lost/stolen, breaks, needs to be replaced for any reason, or if I upgrade to a new iphone I would like to be able to recover everything. 
        OK, so far I have itunes installed on my laptop and I "sync" with that regularly (pretty much whenever I install a new app). But is my understanding correct that by syncing with itunes all of my stuff is stored locally on my laptop? If that is true, then what happens if my laptop crashes? So thats where I thought icloud came in. So I started backing up to icloud (via wifi in Settings>icLoud>storage&backup).  But I notice that when I backup this way it is actually only backing up a small amount of data (in-app data??) rather than the entire app. 
        I thought you would be able to sign into icloud.com and be able to view everything that you have ownership of or what you have backed up but that is not the case. I did download the icloud control panel to my laptop and it shows a little more information.
        So bottom line is I just need someone to explain how this stuff works and what the best course of action is for me to take regularly to make sure everything is safe, Thanks everyone!  I sincerely appreciate any help you can give me!!

    bjs19781978,
    There are 2 ways to back up as you have stated.  iTunes or iCloud.
    You are correct in saying iTunes backs up everything on your computer.  If you do lose your computer though, you will lose that information, but you would most likely still have your phone unless you lose your computer and phone at the same time which would royally suck.
    You can also back up to iCloud like you have said.  iCloud does not back up in the exact same way as iTunes, it only backs up application data, contacts, address books, and a few more things.  The advantage to this is it does it automatically if you are connected to wifi, the phone is locked, and the phone is plugged in.
    Look at this link to see exactly what iCloud does back up.  Hopefully this helps a little.
    Apple - iCloud - backup

  • Whats the best way to transfer everything from my old macbook pro to a new mac mini, i have a external hard drive which i backup to regularly via time capsule

    whats the best way to transfer everything from my old macbook pro to a new mac mini, i have a external hard drive which i backup to regularly via time capsule

    Check out > OS X Lion: How to use Migration Assistant to transfer files from another Mac

  • Wipe my hard drive clean except for the OS whats the best way?

    I need to wipe my hard drive clean except for the OS whats the best way?

    From Kappy (note: with this method, you will need to update to the present OS version using the appropriate Combo Update from Apple Downloads.)
    Boot from the OS X Installer Disc One that came with the computer. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities (Installer menu if using Panther or Jaguar) menu. After DU loads select the startup volume from the left side list then click on the Erase tab. Set the format type to Mac OS Extended (Journaled) then click on the Options button. Select the one pass Zero Data option and click on the OK button. Then click on the Erase button.
    Note: You can skip the Zero Data option if you are not concerned about removing sensitive personal data from the hard drive. If you choose to skip this part of the process then it is possible for others to recover data from the hard drive. The Zero Data procedure will prevent others from getting access to your personal information.
    This process will take 30 minutes to several hours depending upon the size of the hard drive. After formatting has completed quit DU and return to the installer. Now complete the OS X installation. At the completion of the installation do not restart the computer. Instead just shut it off. The next user will be presented with the Setup Assistant when they turn on the computer just as it would if new out of the box.
    https://discussions.apple.com/message/12364050?messageID=12364050#12364050

  • I want to connect a Mac mini to a Samsung 40", Whats the best way to do this?

    I want to connect a Mac mini to a Samsung 40" LED tv to use as the monitor, whats the best way of doing this?

    Understand that there is one HDMI port on your TV that is specifically designated for PC connectivity. The order that the TV or Mini are powered on may determine your results. For your specific TV model, check buyer reviews on Amazon or elsewhere that can include optimum TV/Computer settings adjustment for improved viewing results.

  • Whats the best blu-ray writer to use with final cut pro x

    Whats the best blu-ray writer to use with final cut pro x

    The Sea Tech Blu Ray Writer works great with my Mac.

  • External drives... whats the best for video.... ?

    Hi everyone,
    I'm trying to figure out what the best bang for the buck is in regards to external drives, and what works best for video.
    I have considered the LaCie enclosures, I have also considered buying a 500 GB SATA to replace the 200 GB second drive I have inside the G5. The issue than is what enclosure works the best with a MAC and is 1394 and will the firm ware support huge video files, for render or exporting?
    Can anyone give some advice based on what they have learned through past experience.
    Thanks

    I've been using LaCie FW (800 & 400) drives for about three years now with only one problem - One of the first drives I bought (I think it was a 120 GB) fried itself a few months ago. I currently have 80GB, 120 GB, 400GB and 500 GB drives, all working fine, never have dropped frames. The LaCie drives are pretty tough too, as I've sent most of them back and forth across the country at least a few times with no problems.
    However, be careful if you update the firmware for them - make sure the drive is clean as the firmware update can cause corruption of data on the drive (I found that out the hard way!). Also keep in mind that they do put off a fair amount of heat (especially the big ones) so I wouldn't consider stacking them on top of each other horizontally.

  • When I'm done with my fcp sequence, whats the best way to get it to dvd?

    When I'm done with my fcp sequence, whats the best way to get it to dvd?

    The advice to go to Compressor left out the part that you may want to convert your audio to AC3 becaus ethe MPEG2 bitrate is probably too high for DVD specs.
    This method is in the DVDSP manual and it's in the Compressor manual, both difficult to locate, but easily searchable.
    Here's what I'd do: Export the timeline form FCP in the native sequence settings, self-contained. Bring that self-contained movie into DVDSP and let DVDSP handle the transcode.
    The advice to go to iDVD is even easier.
    bogiesan

  • Whats the best way to get dvd onto 5800

    Peoples,
    I'm strugglin to get DVD onto my noka 5800. It's not obvious in the user manual and looking around the web i need to 'convert' it to the fim on.
    Please does anybody have an easy, fool proof way of doing this??????
    Message Edited by blueleaches on 21-Aug-2009 06:02 PM

    If its possible there should be some walkthrough's on google. 
    http://www.lmgtfy.com/?q=whats+the+best+way+to+get+dvd+onto+5800 

  • Whats the best way to get a big text file in a CLOB variable?

    Hi,
    I have a very premitive type of question.
    I have a big text file, say 30 MB, in a Unix directory (Solaris). I want to get the whole text of that file in a CLOB variable.
    I saw the procedure dbms_lob.loadfromfile/loadclobfromfile. In both these cases, according to the documentation, the target where is collect the data will be a BLOB and not a CLOB. So, I have to convert that blob into a clob.
    If I want to avoid all this conversion process, whats the best way to get a text from a file into a CLOB variable?
    Please suggest.
    Regards

    In addition, LoadFromFile is overloaded to handle both BLOB and CLOB:
    PROCEDURE LOADFROMFILE
    Argument Name                  Type                    In/Out Default?
    DEST_LOB                       BLOB                    IN/OUT
    SRC_LOB                        BINARY FILE LOB         IN
    AMOUNT                         NUMBER(38)              IN
    DEST_OFFSET                    NUMBER(38)              IN     DEFAULT
    SRC_OFFSET                     NUMBER(38)              IN     DEFAULT
    <BR>
    PROCEDURE LOADFROMFILE
    Argument Name                  Type                    In/Out Default?
    DEST_LOB                       CLOB                    IN/OUT
    SRC_LOB                        BINARY FILE LOB         IN
    AMOUNT                         NUMBER(38)              IN
    DEST_OFFSET                    NUMBER(38)              IN     DEFAULT
    SRC_OFFSET                     NUMBER(38)              IN     DEFAULT

  • Im having trouble with my ipad mini in regards with the icloud back up notification; if i press "ok" it doesnt dis appear, i couldn open my ipad/turn off because of this notification; whats the best way to get rid of this? please help

    im having trouble with my ipad mini in regards with the icloud back up notification; if i press "ok" it doesnt dis appear, i couldn open my ipad/turn off because of this notification; whats the best way to get rid of this? please help

    Have you tried a soft-reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Whats the best way to move files from a hard drive that wont boot?

    I made a bootable USB disk and it appears to work fine. I can still read and open files on the old disk (admin account only) from the new USB drive the old one doesn't boot. I don't have a backup but would like to move files to the USB and then reformat the old drive. 
    Whats the best way to capture the data?
    There are four user accounts on the old drive. Only one on the new drive so far. Do I need to set up four accounts on the new drive in order to copy data from each?

    Time Machine is for making backups and restoring ones it previously created. It doesn't restore data backed up or copied in other ways. In your case, it's better to use a cloning utility or manually drag the files than it is to use Time Machine.
    (124317)

Maybe you are looking for

  • Upgrade FIOS TV from Prime HD to Extreme HD and Internet from 50/25 to 150/65

    I upgraded my service and was informed my service would take place on 4/11/2013. I have 3 boxes in my home and none of them are receiving the new channels.  As of today, it still has not been upgraded yet i am being billed.  I used th eonline chat an

  • Gray screen troubleshooting snow leopard disk eject

    My Mac Pro starts up to a gray screen.  I've gone through the steps to troubleshoot it and am currently at the level of trying to start the computer from the Snow Leopard installation disk.  The computer ejects the disk during the boot process and no

  • How to implement hashCode() function

    Hello everybody I need to overrided hashCode method in my Object. This contains 4 attributes of type Long. I need to implement compatible hash code for my equals function. public class MyObject { Long attr1; Long attr2; Long attr3; Long attr4; public

  • VB Error  - Runtime error '49' Bad DLL  calling convention

    Hi Experts, When User is running report he is getting error VB Error  - Runtime error '49' Bad DLL  calling convention . Can you please suggest how to resolve this issue? User has already tried uninstalling SAP GUI and installing again. Thanks & Rega

  • Laptop unable to connect to internet

    I have attempted to set up a wireless-G router.  I can still access the internet from my desktop and I can connect to the router from my laptop.  But what I can't do is connect to the internet from my laptop.  I have set the inernet type as "DHCP" bu