Whats the best program that will autofonfig a wireless connnection?

i just want a tool that will automatically configure my wireless on boot so i dont have to type iwconfig wlan0 essid "blahblahblah" iwconfig wlan0 ap iwconfig wlan0 key all the time and dhcpcd wlan0 after

phunkedelik wrote:cool, thats a real time saver...... the only thing left now is... can you put the netcgf <profilename> command into a boot script?
Check step 4 in the Wiki linked above

Similar Messages

  • Any one know ... whats the cheapest laptop that will run AE cc in the uk

    any one know ... whats the cheapest laptop that will run AE cc in the uk

    unfortunately system requirements, (in general), are usually the MINIMUM required to run the program. the more complex your intended use of the software is, the more you need to consider beefing up the 'system requiremets'.
    let's face it:
    After Effects CC (2014) system requirements and language versions
    Windows
    Intel Core2 Duo or AMD Phenom II processor with 64-bit support
    is a joke to start with....

  • Lightroom is the only program that will run

    So, i recently downloaded after effects, premiere pro, photoshop, speed grade and lightroom from the adobe cloud. All the new adobe software is install onto a different drive than i used in the past. Whenever i start up an adobe product it will start up then about 2 seconds after its close it will close out. No message and no error, it just closes. The only program that does work is lightroom. Any explanation for this or is anything that i can do?

    By "different drive than you used" do you mean you did not install to the default C drive locations?
    I have read other messages that trying to install to anything other than the boot-C drive causes problems

  • DKA790GX Platinum - What's the best card that will work with hybrid crossfire?

    Hi everyone. I know this board is a bit old now but I've set it up for my kids to play oldish games and it occurred to me that video cards from that era might be inexpensive these days. What's the best possible card to use with the on-board card for its hybrid crossfire? Would it be better to just get a separate standalone card? If so what's the best that will work with this board? I'm completely out of the loop these days on tech and have no idea what will even be compatible anymore.

    Quote from: KrisWood on 12-June-12, 00:27:34
    Good news! I resolved my graphics issues without buying a new card. It all came down to a little logic. It used to work just fine. The game it's installed off the same disc as before, and there us no noticeable change in the install media. The hardware has not changed unless there has been some sort of electrical damage I cannot see. I had however updated my drivers many times over the last few years, and always from the AMD website.
    I installed the latest MSI drivers for my onboard graphics and voila, it works!
    All graphical glitches are now gone, though it runs a but slower.
    I may still buy a new card. I'm favouring the HD4870x2 as the top of my motherboard's era or the slightly newer HD5770 which some reviews say is equivalent in performance. The latter uses the same GPU and shaders as the 6770 and is considerably cheaper.
    If I go with NVidia it seems the best card in my price range is the 440GT.
    Thanks, everyone, for all the advice!
    i'd say the 790GX chipset would run a saphire radeon HD5770 card fine i have 1 of them on a different maufactures board that uses the AMD 690GX chipset and i have put both my HD5770's in that with crossfire on and had no issues at all just to try it out!
    and the AMD 690GX is a lower more old chipset then the one your board has so i wouldnt see any issues with the board not accepting the HD 5770 cards at all!
    i like the saphire branded ones better as they run much cooler and quieter then a stock card!

  • Whats the max RAM that will work in a Wallsteet 250Mhz?

    I know Apple says 192mb and I read on Mactracker 512Mb. Are there any restrictions, i.e. the bottom slot? Will it take 1 gig?

    Sorry for hijacking this thread, but on the "new" RSS layout of the forums, I cannot find any way to post a new topic ! There is no button or link to do so.
    My question is related though. I set up my wife on my old Wallstreet 300Mhz using wireless connection to do email, and I am so used to working on a G5, I forgot how slow a G3 is by comparison. The unit only has 128 OEM Ram on it and I see on ebay 512 upgrades for about $50. My wife was complaining about the loading time of the emails.
    I'm wondering if she would see an appreciable speed boost if I upped the memory to the max?
    Anyone have any ideas? The wireless connections seems good and solid.
    Thanks
    Jeff

  • I want to burn all my genuine-store-bought-nothing-illegal-here DVDs to a hard drive and want to know what the best program is to do this is. Thank you!

    Could someone please suggest a program or software which is easy to use and won't confuse the life out of me. I'm not very tech savvy!! Haha *sigh*

    The easiest option would to purchase a backup hard drive and store your data there. Hard drives are getting cheaper all the time, and all you have to do is drag and drop. Lots of good choices here, but I've had good luck with the super-reliable G Drive and the Seagate Freeagent Go.
    When it comes to transferring the DVD, there are some legal ambiguities to address. Strictly speaking, by strict application of copyright law, it's even illegal to copy content you own. In short, if you purchased a DVD, it can't be copied. However, "fair use" is often used to justify copying content - movies or software - that you've paid for already. That means you'll have to "rip" the DVD. Since powers at Apple are likely to object to fair use arguments, you'd best to investigate the details on your own.
    Post here if you have any more questions, or comments, or anything!

  • Whats the best program to clean temp files on a mac?

    My macpro is running slow, I assume its all the temp files, since I've never done a sweep.  Anyone recommend a specific app or program?

    Corrupt directory or disk drive, bad sectors, too many background apps, not enough memory, too old for what you want to run, lack of SSD boot drive....
    And 10GB of free space is old, not a reason - a disk drive that is even 20% free can be highly fragmented free space and other issues.
    Clone your drive.
    Repair it.
    Move all the user and media files off the boot drive to another "data' drive.
    You posted in Mac Pro - not laptop - what model? what OS? what hardware.

  • Whats the best program for watching .avi movies on a palm tungsten e2

    smkranz
    I am a volunteer, and not an HP employee.
    Palm OS ∙ webOS ∙ Android

    What's "best" is in the eye of the beholder...and user. Options include:
    the built-in Media application
    TCPMP (freeware)
    CorePlayer ($$)
    Kimona Player ($$)
    Please read through this "stickied" thread right above yours...about watching DVDs and other video content on your Palm handheld.
    I have also moved your thread to this Audio, Video and Photos board where it more properly belongs.
    Message Edited by smkranz on 04-12-2009 09:10 PM
    Message Edited by smkranz on 04-13-2009 07:59 AM
    smkranz
    I am a volunteer, and not an HP employee.
    Palm OS ∙ webOS ∙ Android

  • Can anybody tell me what the best programe to download a movie

    cananyone  tel me how to download a movie im sick of trying some help would be apreciated

    Heres how to obtain it.
    http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=47377

  • What is the best program to create a HD 1080p slideshow?

    A little advice on what the best program is for creating high quality HD (1080p) slide shows from hires jpegs.  I'm not at all interested in burning the slideshows to DVD.
    Until now I've used iMovie HD 6, iMovie '09, and  iPhoto on our mac mini that runs SnowLeopard. 
    With iMovie  HD 6 the transitions (cross dissolve and overlap) come out quite un-smooth look bad.  Also HD 6 will not do 1080p, only 1080i.
    With iMovie '09  photos that are portrait oriented (as opposed to landscape) often get poorly cropped. 
    iPhoto simply does not have the editing flexibility I need.
    I've tried the demo version of Fotomagico and although the resulting slideshow is stunning, on my machine the program is almost impossible to work with because of its sluggishness.  It is painfully slow in responding to all mouse moves. Dragging an image on the Stage is very difficult because the image lags behind the mouse so by the time the little green alignment guides come on to show center or edge alignment -- the image is already past that point.  There is also a huge lag changing images on the stage.   Also the spinning color wheel appears way too frequently.
    Photo to Movie, based on their website, Photo to Movie can produce HD quality video.  Does anyone have any experience in comparing Photo to Movie with any of the iMovies?
    Other than FCP, what do you folks think is best slideshow program for producing 1080p shows?

    Ditto what Matthew said about Photo to Movie.
    There are many ways to produce slide shows using iPhoto, iMovie or iDVD and some limit the number of photos you can use (iDVD has a 99 chapter (slide) limitation).
    If what you want is what I want, namely to be able to use high resolution photos (even 300 dpi tiff files), to pan and zoom individual photos, use a variety of transitions, to add and edit music or commentary, place text exactly where you want it, and to end up with a DVD that looks good on both your Mac and a TV - in other words end up with and end result that does not look like an old fashioned slide show from a projector - you may be interested in how I do it. You don't have to do it my way, but the following may be food for thought!
    Firstly you need proper software to assemble the photos, decide on the duration of each, the transitions you want to use, and how to pan and zoom individual photos where required, and add proper titles. For this I use Photo to Movie. You can read about what it can do on their website:
    http://www.lqgraphics.com/software/phototomovie.php
    (Other users here use the alternative FotoMagico:  http://www.boinx.com/fotomagico/homevspro/ which you may prefer - I have no experience with it.)
    Neither of these are freeware, but are worth the investment if you are going to do a lot of slide shows. Read about them in detail, then decide which one you feel is best suited to your needs.
    Once you have timed and arranged and manipulated the photos to your liking in Photo to Movie, it exports the file to iMovie  as a DV stream. You can add music in Photo to Movie, but I prefer doing this in iMovie where it is easier to edit. You can now further edit the slide show in iMovie just as you would a movie, including adding other video clips, then send it to iDVD 7, or Toast,  for burning.
    You will be pleasantly surprised at how professional the results can be!
    To simply create a slide show in iDVD 7 onwards from images in iPhoto or stored in other places on your hard disk or a connected server, look here:
    http://support.apple.com/kb/HT1089

  • What is the best program to run on my MacBook Pro to clean it up?

    can anyone tell me what the best program to run on a MacBook Pro to clean it up, make it run faster?

    When you next have the problem, note the exact time: hour, minute, second.
    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above. Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first. Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. In most cases, a few dozen lines are more than enough. It is never necessary or helpful to post more than about 100 lines. "The more, the better" is not the rule here.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • What is the best program for editing pdf documents and filling in forms

    Whats the best program to use for editing pdf documents and filling in pdf forms?

    Acrobat Pro XI  creative suite 6
    or the newer Acrobat Pro creative cloud
    Been using it now for endless years.

  • MSI NEO 2 and 2gb ram, whats the best?

    I am thinking of selling my current 2X512 twinmos w/winbond ( work flawless @ 1T 2-3-6-2-2) so I can get some dual channel 1gb sticks. Now I heard that the NEO 2 will not be able to run 400mhz if I went 3X512mb? Also I know the NF2 can run dual channel even with 3 sticks is this the case for NE02 A64? Also what is the best make that will lose me the least peformance, as I know latency is a big factor with 1gb sticks? I was hoping to run the same timings? Or is this not gonna be possible? I am NOT OVERCLOCKING, this is all at stock
    I have read the sticky but it does not cater for my exact needs in knowing for running 3 stocks etc

    It might be hard to find 2x1gb dual channel ram that will match your current timings. So you might loose a bit of performance on applications than can run under 1gb of ram.
    Personally I have 2x512mb, and my swap file is disabled. I have never runned out of ram so far. All my games stay under the 1024mb mark. This means I get no HDD trashing at all, cause everything stays in ram.
    This is ok, as long as you don't run out of ram. As soon as you do, Windows or the program will probably crash. But I can always set a small swap file if I ever need it again.
    The windows Task Manager keeps a history of the max ram you have ever used (Physical + Virtual). Just open the task manager and click the performance tab.
    TOTAL = Current use.
    LIMIT = Max availiable
    PEAK = Max used on current windows session.
    All parameters refer to REAL + SWAP combined (if swap exists). The Windows Kernel will take some ram away from the PEAK. So when swap is disabled, you will notice that PEAK will not equal your real total ram.

  • What IS the best program to use to create an animation, that needs to be viewed in Powerpoint?

    What IS the best program to use to create an animation, that needs to be viewed in powerpoint?  Essentially i want to output a Movie File, so i'm guessing that Edge Animate is out of the question and it's not photoshop, more likely Flash?

    So it sounds like you want to create a form. There are really two approaches, either Acrobat (AcroForm) or LiveCycle Designer (XFA form). LiveCycle Designer comes with Acrobat Pro, but it's an entirely separate application.
    For an AcroForm, you'd create the underlying document in a page layout program (e.g., InDesign), word processor, or some other software and convert to PDF. Then in Acrobat you;d add the interactive form fields and any scripting you want. You can also add other types of interactive elements such as links, bookmarks, multimedia, etc. You can add a button which when clicked initiates an email with the filled-in form attached of submits to a web server.
    For an XFA form, you'd normally create the entire document in LiveCycle Designer, particularly for a dynamic forms. There's a lot that PDF has to offer that's not available with XFA forms, but XFA forms can do things AcroForms can't. For a good discussion of the important differences between the two types of forms, see the following article: http://acrobatusers.com/blogs/thomp/so-what-difference-between-acroforms-and-xfa
    For a form that needs to be saved with Adobe Reader, the document needs to be Reader-enabled. When such a document is opened in Reader, it will unlock certain functionality that Reader does not have otherwise, such as commenting, signing digital signature fields, and most important saving. But when a document has been extended this way with Acrobat, there are licesning restrictions. In short, if you distribute an enabled document to more than 500 recipients, you are allowed to use data from no more than 500 forms that have been returned to you, including hard copied. If fewer than 500 recipients, there is no such limit.

  • What is the best program to use on Mac for editing, cropping photos from my computer. Looking for a free program that is good.

    What is the best program to use on Mac for editing, cropping photos from my computer. Looking for a free program that is good.

    If your needs are limited to those tasks then both Preview and iPhoto will fit the bill They are already on your Mac. There is a free download from Google called Picasa available here:
    http://picasa.google.com/
      It works much the in same manner as iPhoto. For some really heavy duty work there is GIMP available from SourceForge:
    http://www.gimp.org/macintosh/  Also a free download.
    Message was edited by: kennethfromtoronto

Maybe you are looking for