Whats the best settings for exporting a three camera youtube video on a mac book pro

I need help figureing out Whats the best settings for exporting a three camera youtube video on a mac book pro. I use 15 or 30 fps and aI cant figurwe it out [please help

chucknoris501
What version of Premiere Elements are you using on Mac?
Export your Timeline content to a .mp4 file, using export settings which have been customized under the Advanced Button/Video Tab of the export's preset.
See Publish+Share/Computer/AVCHD and .mp4 category. The exported file is then uploaded to YouTube at the YouTube web site.
If you post the properties of your source video and project settings, I will suggest the settings for the Timeline content export to file saved to the computer
hard drive for upload to YouTube at the YouTube web site.
ATR

Similar Messages

What are the best settings for exporting video in Premiere Pro Cs5.5 in HD MP4 format?

What are the best settings for exporting video in Premiere Pro Cs5.5 in HD MP4 format?
Any help would be greatly appreciated! Thanks

function(){return A.apply(null,[this].concat($A(arguments)))}
bmiller0525 wrote:
What are the best settings for exporting video in Premiere Pro Cs5.5 in HD MP4 format?
Any help would be greatly appreciated! Thanks
thats way too vague of a question... best what? quality? size? playback?
best quality then use high bitrate, small size use low bitrate.

Which are the best settings for exporting comps before edditing in Premiere Pro

Hello everyone!
As the title says, which are the best settings for exporting comps from AE to Pr.Pro and then edit them?
Let me explain: I have two comps in AE (intro and outro) and want to export them in Pr.Pro for edditing along with a fottage i shot.
When i render them the size of the files are huge (30 sec= 7GB).
Which is the best method (and settings) i can export the intro and outro to a 'normal' file size and then put them in Pr.Pro without loosing any quality??
[Comp settings: HDTV 1080 29.97 (1920x1080)]
AE and Premiere Pro both CS4

If you're rendering and exporting an intermediate video file to go from After Effects to any other piece of post-production software (such as Premiere Pro), you want to make sure that you're not losing any quality.
Most compression methods, which make movies smaller, also lose some of the image data---i.e., quality. There are a few compression methods that don't lose any image data; these are "lossless" codecs. These lossless codecs do decrease the size of a video file, but they're nowhere near as effective at decreasing size as the lossy codecs are. But file size isn't important when you're doing post-production work. Big files are a fact of life in post-production.
Examples of lossless codecs include the PNG codec and the Animation codec at the highest quality settings, both of which can be used in a QuickTime (.mov) container. I prefer the PNG codec; it's more efficient for photorealistic images, whereas Animation is more efficient for things like cartoons. There are lots of other lossless and nearly lossless codecs. A lot of people that do video editing like the Lagarith codec, but that is something that you'd have to go and get; it's not part of a standard CS5 or QuickTime installation.
See these FAQ entries for information about compression and why file sizes are big for losslessly encoded files:
"FAQ: Why is my output file huge...?"
"FAQ: What is the best format for rendering and exporting from After Effects?"
By the way, keep in mind that you don't always need to render and export an intermediate movie to go from After Effects to Premiere Pro. There are other ways to move data back and forth between these applications, including Dynamic Link. Which is best depends on the specific circumstance. See "Working with Premiere Pro and After Effects".

4K footage to DVD: what are the best settings for exporting in Premiere Pro CC v7.2.2?

Hello everyone!
I am editing a big bunch of short 4K clips (XAVC in MP4) which will then go onto DVDs. The idea is to get as many of those clips on a DVD as possible. Using Premiere Pro 7.2.2 on Windows 8.
What I would like to know is whether I'm actually using the best possible settings for this case, because the video exported to MPEG2-DVD doesn't look that good. Or maybe it needs to be exported to a different format and rather converted to DVD format after?
The sequence setting are the following:
RED Cinema
Frame rate: 29,97 fps
3840x2160 (16:9)
Square pixels
The export settings I've been using:
MPEG2-DVD
Aspect ratio: 16:9
TV Format: PAL
Field order: progressive
Frame rate: 25
Video quality: 100
Bitrate: VBR
1, I've tried different bitrates, also setting minimum at 9, but this blows up the file size too much (as i mentioned, the idea is to get at many clips as possible on a DVD)
GOP: M - 3, N - 15 (haven't touched those)
Multiplexer: none (should i put DVD?)
I'm using maximum render quality
Have I given all the information?
Any help will be appreciated!@

As Ann has advised do not expect too much, you are going down a lot in quality.
Why are you also going from NTSC to a PAL output?
Premiere will drop frames to get from 29.97 to 25.
PAL DVD players read NTSC discs fine as long as they are region 0
Why are you trying to produce a DVD anyway?
A Bluray would be far better quality.
Also a minimum 9 is way wrong, c9.6 is the max in the spec and hence avoided as your system is trying to push the spec limits to close.
I used to use 6 - 7.5 - 8.8 in my VBR and they looked fine, now I am all HD.

Best Settings for Exporting DVD Footage in a Movie File

Hello,
I've been trying to find the best settings for exporting DVD footage into a movie file from Adobe Premiere CS6.
I recently have been using my Magnavox DVD recorder for recording VHS tapes that I made long ago for shows and various other things, and no matter what, my footage doesn't come out as it needs to be.
Here's an example of what I did recently with my own settings:
http://www.youtube.com/watch?v=qFV4sT7rHGs
I'm not expecting HD footage, I know these are tapes, but I'm playing the raw footage on my Xbox 360, and it looks better than this. I had to directly use the VOB files on the DVD for this, as trying to rip the files into an AVI or any other format with a DVD ripper didn't do anything, in fact it degraded the quality and made the audio not play in Premiere.
So what would be some good settings for exporting a sequence with DVD footage that is from a VHS into a movie file, preferably one that wouldn't degrade the quality?
Thanks!

First, read Why not edit mpeg http://tangentsoft.net/video/mpeg/edit.html to get a general idea of why a VOB makes a very poor source file (which is a renamed MPG, with some other stuff like menu screens)
Also, Read Bill Hunt on editing a VOB/MPG file http://forums.adobe.com/thread/464549
Once you have a DVD compliant VOB on your timeline, and understanding that a standalone DVD recorder sometimes plays fast-n-loose with "compliance" per the DVD specification, about all you can do is export to standard or widescreen DV AVI and accept the fact that re-encoding an already compressed file is just not going to give great results

Best settings for exporting from AE

Hi,
I am wondering what the best settings to export to from AE for editing in Premiere CS5.5. Previously I would digitize from tape and would export lossless .avi from AE but now I am using XDCAM EX 1080 50i sequence presets on Premiere and I wonder if I should amend the settings from AE or just keep them as lossless?
As always thanks in advance!

Keep it lossless.

Whats the best way to export Quality flash video .flv?

Hi Everyone,
Whats the best way to export a very good quality video flash.
I tried several settings in the flash export in FCP, but it comes sort of dithered or slightly pixilated.
I see these great clear videos on the net and I wish I can export as good qiality.
I would really appreciate if some one gives me the right settings..
eg> size, bit rate and all..
Many thnx

http://www.macromedia.com/software/flash/flashpro/video/

Whats the best settings to rip DVD to Mpeg Streamclip for use in FCE??

Hi there.
Ok, I using MPEG Streamclip to rip a DVD for editing on FCE.
Whats the best settings to get it to my hard drive?
MPEG4?? Compression rate??
Chris

Assuming your DVD plays widescreen, the better settings in MPEG Streamclip would be:
Export to QuickTime
Compression = Apple Intermediate Codec
Frame size = 1920x1080
Pretty much everything else should remain at default settings.
Keep in mind that if you have an NTSC DVD, the resulting QT/AIC video will be 60i.
In FCE, select the AVCHD 1920x1080i60 easy setup, create a new sequence, import the converted file and edit away. The quality should be very nice.

What are the best settings for ripping cd's in the AAC format?

I have researched and found out that the AAC format rules over the MP3 format as fas as sound quality goes with lossy formats. Example: AAC at 128 is better than MP3 at 160 as so forth. My questions are: What are the best settings for ripping cd's in the AAC format? Will I be able to burn cd mixes with the tracks I import into itunes after importing using the AAC format? Does the AAC format have VBR like the MP3 format? Is there other ripping software such as dbPoweramp and Exact Audio Copy that does a better job ripping cd's in the AAC format? Please help!

mysteryroach wrote:
My questions are: What are the best settings for ripping cd's in the AAC format?
It is a matter of opinion, but I suggest 256 kb/s, CBR, and leave all other settings on automatic.
Will I be able to burn cd mixes with the tracks I import into itunes after importing using the AAC format?
Yes. Just put them in a playlist and burn.
Does the AAC format have VBR like the MP3 format?
Yes. You will see it as an option in the Import Settings.
Is there other ripping software such as dbPoweramp and Exact Audio Copy that does a better job ripping cd's in the AAC format?
EAC does a better job of correcting errors in damaged CDs, but for normal CDs iTunes does a fine job of ripping to AAC.

What is the best setting for export movie in widescreen format?

Please tell me what is the best setting for exporting movie in Widescreen format?

Like in After effect we use "NTSC D1 Widescreen Square Pixel".,
Carefully examine the codec and pixel dimensions of that output file. That's certainly easy for an experienced VFX person like yourself.
Then carefully look over the presets in FCP to find the same attibutes. You can also use the online help system for FCP and search for "D1"
However, your question remains unanswerable because we don't know how you're getting to the monitor. What are you playing back you AE sequences on that displays them on your LCD? You're assuming we know what you're doing and, I assure you, we do not.
bogiesan

What are the best settings for video compression if my end result is for use as progressive .flv

What are the best settings for video compression if my end result is for use as progressive .flv.?
Thanks,
KIM

Use the Final Cut Studio forum
http://discussions.apple.com/forum.jspa?forumID=939

Whats the best option for passing parameters between tf?

Dear All,
I have three Task Flows:
1. TF1
     - Main Taskflow that calls a web service to gather its data
2. TF2
     - Secondary taskflow which receives a parameter and depending on the value of the parameter received will display its data accordingly. Generally any data
     is feed from TF1
3. TF3
     - Same as TF2Use Case:
All three TF will be dropped to the page as Regions in a Webcenter Portal Application. Changes in TF1 should propagate into TaskFlow 2.
Question:
1. How do I configure that changes in TF1 would be propagated back into task flow 2 and 3 and whats the best option for this?
2. At runtime, user can choose to edit the page and TF2 and TF3 can be deleted but TF 1 should remain as the source of information.
Given the scenario above:
- shall I wire the taskflows via page parameters?
- contextual events?
What are the considerations that needs to be thought of. I havent done such requirements before.
Please help.
Webcenter 11.1.1.6

Contextual events seem to be the best case.
This way you can trigger whenever you want. Web services can be slow so you can trigger the event when the gathering of the data has been finished and then pass some value on the event.
An event also has a payload so it's an ideal scenario to add the data from the service on it so you can use it in the other TF's.
In order to manage the deletion of the TF1, you can use the UI events on the composer: http://docs.oracle.com/cd/E23943_01/webcenter.1111/e10148/jpsdg_page_editor_adv.htm#CHDHHFDJ

Whats the best ram for G5 june 2004?

whats the best ram for G5 june 2004?
any links to uk websites or suggest the name and i'll look it up.

This one for sure...
Backwards compatible to SATA 1.5Gb/s or 3Gb/s systems.
http://eshop.macsales.com/item/Western%20Digital/WD5002AALX/
UK...
http://www.amazon.co.uk/WD-Caviar-Black-WD5002AALX-internal/dp/B004DMFAJ2
Jumper settings...
http://wdc.cu

Whats the best software for photo editing and creating product catalogues that can be saved as PDF's

Whats the best software for photo editing and creating product catalogues that can be saved as PDF's

You are asking two different questiions:
1. What's a good photo editor? Answer to that here is probably obvious.
2. What's a good desktop publishing/page layout program for creating PDF files for production? Answer, not PSE. It's a photo editor, not a page layout program.

Whats the best router for multiple Wireless-G

I just want to know whats the best router for running multiple wireless-G with some things wired and some wireless also sharing on the network and gaming with a good internet connection whats the best router ?
Good Speeds
Good Range
Multiple online sharing
Online Gaming
I think everything is wireless-g
Things i have on the router
Linksys Nas200 - wired
Laptop - wireless
Desktop - wired
2 Xbox 360's - 1 wired and 1 wireless
2 Sony PSP's - both wireless
Soon a wireless printer or a linksys printer server
Message Edited by Sas101 on 11-12-2007 07:30 PM

As you posted it sems that you need good router for wireless connectivity .....
You can go for any N router lile WRT300N.... WRT350N ..... WRT150N ....
They will give you excellent performance for the connection you require.....

Whats the best settings for exporting a three camera youtube video on a mac book pro

Similar Messages

Maybe you are looking for