Whats the best tv to get for apple tv?

What's the best TV to get for the apple TV's ?

Most should work, the pre-requisites would be an HDMI socket supporting HDCP and 720p or 1080p capability.
There are too many variables such as screen size, styling, plasma vs LCD etc, cost and other fancy features on modern TVs - you may want a basic no frills display with good picture quality or a bells and whistles SmartTV.
AC

Similar Messages

  • What is the best mac to get for downloading over 30,000 photos?

    what is the best mac to get for downloading over 30,000 photos?

    Download from where into what? What are you going to do with the photos?
    I agree with Larry that a Mac with an SSD boot drive and addtional standard drive is blazingly fast.  I have an iMac setup that way and it boots in 14 seconds.  With the system and applicaitons and iPhoto library on the SSD drive and most other documents, backup photos, etc. on the std. drive. it works beautifully.  However, I do not let the free space on the SSD drive get less than 50 GB.
    I also have an external HD that I sue with Time Maching to backup both my SSD and standard drive in the iMac.
    OT

  • Im having trouble with my ipad mini in regards with the icloud back up notification; if i press "ok" it doesnt dis appear, i couldn open my ipad/turn off because of this notification; whats the best way to get rid of this? please help

    im having trouble with my ipad mini in regards with the icloud back up notification; if i press "ok" it doesnt dis appear, i couldn open my ipad/turn off because of this notification; whats the best way to get rid of this? please help

    Have you tried a soft-reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • When I'm done with my fcp sequence, whats the best way to get it to dvd?

    When I'm done with my fcp sequence, whats the best way to get it to dvd?

    The advice to go to Compressor left out the part that you may want to convert your audio to AC3 becaus ethe MPEG2 bitrate is probably too high for DVD specs.
    This method is in the DVDSP manual and it's in the Compressor manual, both difficult to locate, but easily searchable.
    Here's what I'd do: Export the timeline form FCP in the native sequence settings, self-contained. Bring that self-contained movie into DVDSP and let DVDSP handle the transcode.
    The advice to go to iDVD is even easier.
    bogiesan

  • Whats the best alternative to idvd for burning a disk with pics to play in a dvd player?

    Whats the best alternative to idvd for burning a disk with pics to play in a dvd player? I don't want to deal with older versions of ilife.

    Whats the best alternative to idvd for burning a disk
    In my opinion, there are none.
    Yes, there are other programs that will put a movie on a DVD.   I have tried most of the other substitutes including Toast, Burn, DVD Creator, Wondershare, and others.  None of them come anywhere near the ease-of-use and power of iDVD.
    IDVD is a wonderful piece of software and well worth the low cost of $40.
    http://www.amazon.com/Apple-MC623Z-A-iLife-VERSION/dp/B003XKRZES/ref=sr_1_1?ie=U
    http://dealmac.com/lw/artclick.html?1,527850,1872219

  • Whats the best way to get dvd onto 5800

    Peoples,
    I'm strugglin to get DVD onto my noka 5800. It's not obvious in the user manual and looking around the web i need to 'convert' it to the fim on.
    Please does anybody have an easy, fool proof way of doing this??????
    Message Edited by blueleaches on 21-Aug-2009 06:02 PM

    If its possible there should be some walkthrough's on google. 
    http://www.lmgtfy.com/?q=whats+the+best+way+to+get+dvd+onto+5800 

  • Whats the best way to get a big text file in a CLOB variable?

    Hi,
    I have a very premitive type of question.
    I have a big text file, say 30 MB, in a Unix directory (Solaris). I want to get the whole text of that file in a CLOB variable.
    I saw the procedure dbms_lob.loadfromfile/loadclobfromfile. In both these cases, according to the documentation, the target where is collect the data will be a BLOB and not a CLOB. So, I have to convert that blob into a clob.
    If I want to avoid all this conversion process, whats the best way to get a text from a file into a CLOB variable?
    Please suggest.
    Regards

    In addition, LoadFromFile is overloaded to handle both BLOB and CLOB:
    PROCEDURE LOADFROMFILE
    Argument Name                  Type                    In/Out Default?
    DEST_LOB                       BLOB                    IN/OUT
    SRC_LOB                        BINARY FILE LOB         IN
    AMOUNT                         NUMBER(38)              IN
    DEST_OFFSET                    NUMBER(38)              IN     DEFAULT
    SRC_OFFSET                     NUMBER(38)              IN     DEFAULT
    <BR>
    PROCEDURE LOADFROMFILE
    Argument Name                  Type                    In/Out Default?
    DEST_LOB                       CLOB                    IN/OUT
    SRC_LOB                        BINARY FILE LOB         IN
    AMOUNT                         NUMBER(38)              IN
    DEST_OFFSET                    NUMBER(38)              IN     DEFAULT
    SRC_OFFSET                     NUMBER(38)              IN     DEFAULT

  • Whats the best quiz maker software for macbrook pro????

    whats the best quiz maker software for macbrook pro????

    Why not google, "quiz maker software for mac os" and see what out there? Then test the ones that seem to you to be what interests you and have the features you want.

  • Whats the best heart rate transmitter for ipod nano 7th gen?

    Whats the best heart rate transmitter for ipod nano 7th gen:
    Polar WearLink+ Transmitter Nike+
    Polar H7 heart rate sensor
    Wahoo Fitness Blue HR
    Adidas miCoach heart rate monitor

    Calibrate your ipod by charging fully, then using it until it drains then charging it again. And resetting might help too.

  • Whats the best way to get the server name in a servlet deployed to a cluster?

              Hi,
              I have a servlet in a web application that is deployed to a cluster, just
              wondering what is the best way to get the name of the node that the server is
              running on at run time??
              Thanks
              

              Please try to modify the following code and test for your purpose: (check Weblogic
              class document for detail)
              import javax.naming.*;
              import weblogic.jndi.*;
              import weblogic.management.*;
              import weblogic.management.configuration.*;
              import weblogic.management.runtime.*;
              MBeanHome home = null;
                   try{
                        //The Environment class represents the properties used to create
                             //an initial Context. DEfault constructor constructs an Environment
                             //with default properties, that is, with a WebLogic initial context.
                             //If unset, the properties for principal and credentials default to
                             //guest/guest, and the provider URL defaults to "t3://localhost:7001".
                             Environment env = new Environment();
                             //Sets the Context.PROVIDER_URL property value to the value of
                             //the argument url.
                             if(admin_url!=null){
                                  env.setProviderUrl(admin_url);
                                  //Sets the Context.SECURITY_PRINCIPAL property to the value of
                                  //the argument principal.
                                  env.setSecurityPrincipal(username);
                                  //Sets the value of the Context.SECURITY_CREDENTIAL property to
                                  //the value of the argument cedentials
                                  env.setSecurityCredentials(password);
                                  //Returns an initial context based on the properties in an Environment.
                                  ctx = env.getInitialContext();
                             }else ctx = new InitialContext();
                             home = (MBeanHome) ctx.lookup(MBeanHome.ADMIN_JNDI_NAME);
                             ctx.close(); //free resource
                             // or if looking up a specific MBeanHome
                             //home = (MBeanHome) ctx.lookup(MBeanHome.JNDI_NAME + "." + serverName);
                             DomainMBean dmb = home.getActiveDomain(); //Get Active Domain
                             ServerMBean[] sbeans = dmb.getServers(); //Get all servers
                             if(sbeans!=null){
                                  for(int s1=0; s1<sbeans.length; s1++){
                                       String privip = sbeans[s1].getListenAddress();
                                  sbeans[s1].getName();
                             sbeans[s1].getListenPort();
                                                 WebServerMBean wmb = sbeans[s1].getWebServer();
                   }catch(Exception ex){
              "Gao Jun" <[email protected]> wrote:
              >Is there any sample code? Thanks
              >
              >Best Regards,
              >Jun Gao
              >
              >"Xiang Rao" <[email protected]> wrote in message
              >news:[email protected]...
              >>
              >> Sure. You can use the Weblogic management APIs to query ServerBean.
              >>
              >>
              >> "Me" <[email protected]> wrote:
              >> >
              >> >Thanks for your reply, i was hoping to find a better way for example
              >> >a class in
              >> >weblogic API.
              >> >
              >> >Thanks
              >> >
              >> >"Xiang Rao" <[email protected]> wrote:
              >> >>
              >> >>Physical: InetAddress.getLocalHost().getHostName()
              >> >>Weblogic: System.getProperty("weblogic.Name");
              >> >>
              >> >>
              >> >>"Me" <[email protected]> wrote:
              >> >>>
              >> >>>Hi,
              >> >>> I have a servlet in a web application that is deployed to a
              >cluster,
              >> >>>just
              >> >>>wondering what is the best way to get the name of the node that
              >the
              >> >>server
              >> >>>is
              >> >>>running on at run time??
              >> >>>
              >> >>>Thanks
              >> >>
              >> >
              >>
              >
              >
              

  • Using final cut studio what the best way of getting a mini disc in to FCP?

    I do some weddings and record some audio on to a mini disc recorder ( the small ones . On my avid liquid edit suite I just used to run it in live or ingest it on a 2 hour timer, and just record audio.
    What the best way to do it with final cut studio and final cut pro?

    Is there a reason you can't do the same on your mac system? What outputs does the audio recorder have?
    Jerry

  • What is the best iPad to get for elders/old people?

    Hello.
    What is the best iPad model to get for old people/elders who are over 60 years old? I assume iPads' iOS can do DPI to adjust sizes for bigger
    visuals. Also, it needs to work well with both English and Chinese
    Thank you in advance.

    antdude wrote:
    , it needs to work well with both English and Chinese
    All iPads can read and write Chinese and can also have Chinese user interface.  They can even accept Chinese handwriting input.  Plus Chinese SIRI, Dictation, and Dictionaries.  See
    https://www.apple.com/ipad-air/specs

  • What is the best case to get for my new Macbook Pro

    I just bought a new 15" Pro over the phone last week and according to the tracking it should be here by Wednesday.  I am extremely excited and cannot wait to get my new machine (my first mac).  But my question is, I want to protect it, what is the the best option, best case, or best sleeve, in order to protect my new investment?
    Thank you in advance for any comments.

    I saw this today when researching the same thing
    Mouse over the pictures for a side view.
    http://www.radtech.us/Products/MacTruck.aspx
    (no comp)

  • Whats the best way to get a description for a code

    Hi,
    What is the best way to find description for a code, when both of them resides in different table.I have to do this like 3 times for different codes.The code and description lies in differnt table.
    Can i use select statement.. if yes, what operator should i use?
    Thanks

    Hi,
    to do a lookup you may either use the Key Lookup Operator (it makes it easier to define default return values if the lookup fails) or a Joiner (to probably outer join your lookup table).
    If you have many lookups you can do them in one joiner instead of having a key lookup operator for every one of them to reduce the total number of operators in your mapping.
    Regards,
    Carsten.

  • Whats the best way to get an averaged measuremen​ts while scanning?

    I currently have a PXI 4071 DMM and a PXI 2575 Mux. I've played around with the examples of how to do scanning of channels which all works out fine. However the scanning only takes one measurement every time it steps down the scan list. What I need is for every scan step to take X number of measurements and average them before moving on to the next scan step. I've played around with the Sample Count and Trigger count but cannot seem to get this done correctly. I've gotten it to the point where it runs through the scan list multiple times and I can average from that but I don't want to tax the relays that much. Can anyone point me in the correct direction for this?

    Hey Duke,
    I can say with great confidence that the 407x DMM is much more accurate
    than any DAQ product NI sells; if you're seeing unexpected accuracy errors after acquiring one data point with the 407x DMM, I think the best method is to figure out the discrepancy, not average it out.  I recommend you verify the DUT signal with a scope (you can use the DMM in digitizer
    mode) to see if the signal is still settling as you take your first measurement.  If this is the case, each successive measurement becomes much closer to the value you expect,  so averaging 5 samples allows the system to settle at the later points, and we get close to the actual value.  If this is the case, then I recommend you increase the settling time property (configuration»Advanced»Settle Time) enough that your DUT signal has settled and then take a single measurement (with increased aperture time, if desired, as mentioned previously).  Note that the value you obtain will differ from the old system if the above conditions exist... the 407x measurements are more accurate.
    Obviously, if you scope the signal and it's steady during your first measurement, then my previous post would solve the problem while still taking only one measurement.  For my own curiosity, what type of measurement are you performing?
    Keep us up to date on your progress and don't hesitate to post of with any additional questions.
    -John Sullivan
    Analog Engineer

Maybe you are looking for