Whats the best way to Change, Increase partition on Win side.

I want to up grade to Windows 8 on my bootcamp partition which is 34GB now, I have 500GB free space on my Mac side. IF I understand what others have written,
I will go into Disck utility and erase the bootcamp and then reinstall bootcamp and increase the partition of boot camp to 200GB. I already back up my mac data and the windows data separately, so I have that if I need it. So Is this the best way to repartition?  Or do I also need to erase and start over on my mac side also?  I have a iMac 2010, 16GB RAM, 1 TB HD, and been running boot camp since I bought it. I also use Parallels (recently upgraded to 10) to go back and forth between them.
   Thanks for any help.

I just successfully installed Windows 8.1 Update 1 on BootCamp on Mac OS X Yosemite. Here is a step by step I just wrote, hope it helps y'all:
How to successfully install Windows 8, or above, on Mac OS X Mavericks or above:
Requirements:
1- Windows OS ISO Image file
2- An 8GBs USB Flash Drive
3- A good Internet connection as you will need to download the Windows compatible drivers for your Mac
Steps:
1- Open up Disk Utility and create an additional partition for Windows formatted as ExFat. 100GBs, or above, is recommended as update to the operating system, as well as Apps requiere space on your HD or SSD [This step can be done during Mac OS X's installation process]
2- Open up BootCamp Assistant
3- Make sure only the 'Create a Windows 7 or later version install disk' is checked and your USB Flash Drive plugged in and click 'Continue'
4- Click 'Choose' and select your Windows ISO Image file
5- Select the USB Flash Drive you will be using during the installation process and click continue to confirm
6- Once done, restart your Mac and hold down the 'alt/option' key on your keyboard to bring up the Boot Menu
7- Select the USB Flash Drive named Windows, not the UEFI Boot
8- Install Windows as you normally would
* Remember to press and hold the 'alt/option' key, and select the Windows Partition, whenever the installation process requires your Mac to restart
* http://msdn.microsoft.com/en-us/library/windows/apps/jj945423.aspx
* http://windows.microsoft.com/en-us/windows-8/install-windows-on-mac

Similar Messages

  • What would be the best way to change the color of part of this image? (image attached)

    I am on XP using PS CS4.
    Please see the photograph below. I would like to change the color of the shirt/apron of this lady & I was wondering what the best way is to do that. I know if I try replace color, the white bowls change color as well. In the past I have isolated parts of images using paths, but I wanted to know if that was the most efficient way. Maybe masking is the answer. I just wanted to hear from the pros
    Thank you.

    You're welcome!
    Refine Edge button is in the options bar when the QST is active.
    Refine Mask should be available whenever a mask is targeted.

  • I have a 1 TB Time Capsule on a wireless network with my iMac and my wife's MacBook Pro.  The TC is almost full. What is the best way/device to increase storage capacity?

    I have a 1 TB Time Capsule on a wireless network with my iMac and my wife's MacBook Pro.  The TC is almost full. What is the best way/device to increase storage capacity?

    Replace the Time Capsule with one that has a larger hard drive. Or erase the one you have and start a new set of backups or backup one of the computers to a different backup drive.

  • Whats the best way to stream videos?

    whats the best way to stream video thru plumtree portal?What all it requires? (technology/application/server/plumtree development?)

    Hello Kuljit,
    For the windows platform you could set up Windows Media services. It can be configured to play all sorts of media files. I created a "radio station" portlet that multiple channels and from the portal I could select a drop down and the station would play that stream. I would make sure that media services are not being gatewayed and that anyone that can see your portal can see the videos. Here is my html that I made a portlet out of: This will not show the video window. You can increase the size of the object to show the video window with controls. Check out MSDN online for configuration of the <object>
    <FORM NAME="streamForm"> <INPUT NAME="btnPlay" TYPE="Button" VALUE="Play" onclick="MediaPlayer1.controls.Play();"> <INPUT NAME="btnStop" TYPE="Button" VALUE="Stop" onclick="MediaPlayer1.controls.stop();"> <select name="musicGroup" onChange="changeStream()"> <option value="">-- Select --</option> <option value="barenakedladies">Barenaked Ladies</option> <option value="pinkfloyd">Pink Floyd</option> </select> </FORM>
    <OBJECT CLASSID="clsid:6BF52A52-394A-11D3-B153-00C04F79FAA6" ID="MediaPlayer1" height="0" width="00"> <PARAM NAME="Name" VALUE="MediaPlayer1"> <param name="uiMode" value="invisible"> <PARAM NAME="TransparentAtStart" Value="true"> <PARAM NAME="AutoStart" Value="true"> <PARAM NAME="AnimationatStart" Value="false"> <PARAM NAME="ShowControls" VALUE="0"> <PARAM NAME="autoSize" Value="false"> <PARAM NAME="displaySize" Value="0"></OBJECT><script language="javascript">function changeStream(){ df = document.streamForm; if(df.musicGroup.selectedIndex != 0) {  MediaPlayer1.url = "mms://MBRUCELT-W3k/"+df.musicGroup[df.musicGroup.selectedIndex].value; } }</script>
    This works for the latest version of Window Media Player. The mms:// in my script is a call to Windows Media Services. That is the part that should be accessible from outside the portal.
    HTH,
    Michael [email protected]

  • HT3819 I have 2 Ipod touch's, one a 64gb and one an 8gb.  Whats the best way to use them both on the same itunes account?

    I have 2 Ipod touch's, one a 64gb and one an 8gb.  Whats the best way to use them both on the same itunes account?

    Click here for options.
    (64410)

  • Whats the best way to transfer everything from my old macbook pro to a new mac mini, i have a external hard drive which i backup to regularly via time capsule

    whats the best way to transfer everything from my old macbook pro to a new mac mini, i have a external hard drive which i backup to regularly via time capsule

    Check out > OS X Lion: How to use Migration Assistant to transfer files from another Mac

  • Wipe my hard drive clean except for the OS whats the best way?

    I need to wipe my hard drive clean except for the OS whats the best way?

    From Kappy (note: with this method, you will need to update to the present OS version using the appropriate Combo Update from Apple Downloads.)
    Boot from the OS X Installer Disc One that came with the computer. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities (Installer menu if using Panther or Jaguar) menu. After DU loads select the startup volume from the left side list then click on the Erase tab. Set the format type to Mac OS Extended (Journaled) then click on the Options button. Select the one pass Zero Data option and click on the OK button. Then click on the Erase button.
    Note: You can skip the Zero Data option if you are not concerned about removing sensitive personal data from the hard drive. If you choose to skip this part of the process then it is possible for others to recover data from the hard drive. The Zero Data procedure will prevent others from getting access to your personal information.
    This process will take 30 minutes to several hours depending upon the size of the hard drive. After formatting has completed quit DU and return to the installer. Now complete the OS X installation. At the completion of the installation do not restart the computer. Instead just shut it off. The next user will be presented with the Setup Assistant when they turn on the computer just as it would if new out of the box.
    https://discussions.apple.com/message/12364050?messageID=12364050#12364050

  • I want to connect a Mac mini to a Samsung 40", Whats the best way to do this?

    I want to connect a Mac mini to a Samsung 40" LED tv to use as the monitor, whats the best way of doing this?

    Understand that there is one HDMI port on your TV that is specifically designated for PC connectivity. The order that the TV or Mini are powered on may determine your results. For your specific TV model, check buyer reviews on Amazon or elsewhere that can include optimum TV/Computer settings adjustment for improved viewing results.

  • When I'm done with my fcp sequence, whats the best way to get it to dvd?

    When I'm done with my fcp sequence, whats the best way to get it to dvd?

    The advice to go to Compressor left out the part that you may want to convert your audio to AC3 becaus ethe MPEG2 bitrate is probably too high for DVD specs.
    This method is in the DVDSP manual and it's in the Compressor manual, both difficult to locate, but easily searchable.
    Here's what I'd do: Export the timeline form FCP in the native sequence settings, self-contained. Bring that self-contained movie into DVDSP and let DVDSP handle the transcode.
    The advice to go to iDVD is even easier.
    bogiesan

  • Whats the best way to get dvd onto 5800

    Peoples,
    I'm strugglin to get DVD onto my noka 5800. It's not obvious in the user manual and looking around the web i need to 'convert' it to the fim on.
    Please does anybody have an easy, fool proof way of doing this??????
    Message Edited by blueleaches on 21-Aug-2009 06:02 PM

    If its possible there should be some walkthrough's on google. 
    http://www.lmgtfy.com/?q=whats+the+best+way+to+get+dvd+onto+5800 

  • Whats the best way to get a big text file in a CLOB variable?

    Hi,
    I have a very premitive type of question.
    I have a big text file, say 30 MB, in a Unix directory (Solaris). I want to get the whole text of that file in a CLOB variable.
    I saw the procedure dbms_lob.loadfromfile/loadclobfromfile. In both these cases, according to the documentation, the target where is collect the data will be a BLOB and not a CLOB. So, I have to convert that blob into a clob.
    If I want to avoid all this conversion process, whats the best way to get a text from a file into a CLOB variable?
    Please suggest.
    Regards

    In addition, LoadFromFile is overloaded to handle both BLOB and CLOB:
    PROCEDURE LOADFROMFILE
    Argument Name                  Type                    In/Out Default?
    DEST_LOB                       BLOB                    IN/OUT
    SRC_LOB                        BINARY FILE LOB         IN
    AMOUNT                         NUMBER(38)              IN
    DEST_OFFSET                    NUMBER(38)              IN     DEFAULT
    SRC_OFFSET                     NUMBER(38)              IN     DEFAULT
    <BR>
    PROCEDURE LOADFROMFILE
    Argument Name                  Type                    In/Out Default?
    DEST_LOB                       CLOB                    IN/OUT
    SRC_LOB                        BINARY FILE LOB         IN
    AMOUNT                         NUMBER(38)              IN
    DEST_OFFSET                    NUMBER(38)              IN     DEFAULT
    SRC_OFFSET                     NUMBER(38)              IN     DEFAULT

  • Im having trouble with my ipad mini in regards with the icloud back up notification; if i press "ok" it doesnt dis appear, i couldn open my ipad/turn off because of this notification; whats the best way to get rid of this? please help

    im having trouble with my ipad mini in regards with the icloud back up notification; if i press "ok" it doesnt dis appear, i couldn open my ipad/turn off because of this notification; whats the best way to get rid of this? please help

    Have you tried a soft-reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Whats the best way to move files from a hard drive that wont boot?

    I made a bootable USB disk and it appears to work fine. I can still read and open files on the old disk (admin account only) from the new USB drive the old one doesn't boot. I don't have a backup but would like to move files to the USB and then reformat the old drive. 
    Whats the best way to capture the data?
    There are four user accounts on the old drive. Only one on the new drive so far. Do I need to set up four accounts on the new drive in order to copy data from each?

    Time Machine is for making backups and restoring ones it previously created. It doesn't restore data backed up or copied in other ways. In your case, it's better to use a cloning utility or manually drag the files than it is to use Time Machine.
    (124317)

  • Whats the best way to create USER variable in BI Apps?

    I have just installled BI Apps and am trying to integrate EBS R12 with OBIEE 11g
    We have USER variable already defined in the BI Apps rpd.
    In EBS Security context init block i need to define USER variable, but when i define it... it says *'USER' has already been defined in the variable "Authentication"."USER"*
    Whats the best way to create USER variable for EBS Security Context init block?
    1) Delete the existing USER variable and then define a new one ( in this case all the places where USER variable is getting used in the rpd would become <missing>)
    And i was told that it should not be done.
    Let me know how can it be done.
    Thanks
    Ashish

    Disable existing Init block and then double click on USER variable and hit on NEW... button to create new Init block
    Thanks
    Edited by: Srini VEERAVALLI on May 1, 2013 4:18 PM

  • Using final cut studio what the best way of getting a mini disc in to FCP?

    I do some weddings and record some audio on to a mini disc recorder ( the small ones . On my avid liquid edit suite I just used to run it in live or ingest it on a 2 hour timer, and just record audio.
    What the best way to do it with final cut studio and final cut pro?

    Is there a reason you can't do the same on your mac system? What outputs does the audio recorder have?
    Jerry

Maybe you are looking for