Whats the best way to print stems?

I need to make stems to import into pro tools. Say I have 10 stereo tracks with inserts and aux sends and basically a whole mix. I want to print stems so I can import the mix into pro tools and work on it at another studio. In pro tools I could route things to stereo busses and then make stereo tracks with the inputs set to those busses. I can figure out how to make the output of a channel a stereo bus. Is that possible?

It's easy. I have been doing this for a while now. Just solo the track(s) you need to Bounce. What I do to make it fool proof at the Pro tools end is: Set the Locators to the full length of your song. say bar 1 to whatever 70. Easily done by just dragging the cycle in the Bar line the full length of the song. Then hit the Bounce button. Then check your settings. Check the locator settings as well in the Bounce window. I set my audio settings to 24 bit 48 Khz wave file. Then hit bounce and you're away. Repeat the same procedure for all the individual tracks or leave all tracks on soloed to do the full mix. I do my bouncing offline and make sure Normalize is not ticked. Good luck.

Similar Messages

  • What is the best way to print from an iPad?

    I have the Printer Pro app, and it seems to do a good job locating my wireless printer, but it gets complicated to print webpages or pages documents. What is the best way to print from an iPad 2?

    If you have a compatible printer, use AirPrint http://www.apple.com/ipad/features/airprint.html and http://support.apple.com/kb/HT4356
    If not, you would need to purchase software, such as:
    http://itunes.apple.com/us/app/printcentral-for-ipad/id366020849?mt=8
    http://www.ecamm.com/mac/printopia/
    http://www.collobos.com/

  • What's the best way to print content of javax Object (JTable for example)?

    Hi there,
    1) I would like to know the best way to print content of jtable (for example)
    2) I would like to know how can I Print content of SQL statment (for example "SELECT ID, NAME FROM COMPANY")?
    Best Regard,
    Eyal
    [email protected]

    Depends on what you want printed. You can do something like System.out.println(myTable);but you may not like what you see. If you want to print anything else, extend JTable and create a new toString() method that prints out what you want.
    As for printing a SQL statement - assuming it is in a String, you can just do System.out.println(mySQLStatement);

  • What is the best way to print from pages on my iPad 2?

    What is the best way to print a pages document directly from ipad 2?

    Purchase and use an AirPrint capable printer.  Everything is described here:
    http://support.apple.com/kb/HT4356

  • HT3819 I have 2 Ipod touch's, one a 64gb and one an 8gb.  Whats the best way to use them both on the same itunes account?

    I have 2 Ipod touch's, one a 64gb and one an 8gb.  Whats the best way to use them both on the same itunes account?

    Click here for options.
    (64410)

  • Whats the best way to transfer everything from my old macbook pro to a new mac mini, i have a external hard drive which i backup to regularly via time capsule

    whats the best way to transfer everything from my old macbook pro to a new mac mini, i have a external hard drive which i backup to regularly via time capsule

    Check out > OS X Lion: How to use Migration Assistant to transfer files from another Mac

  • Wipe my hard drive clean except for the OS whats the best way?

    I need to wipe my hard drive clean except for the OS whats the best way?

    From Kappy (note: with this method, you will need to update to the present OS version using the appropriate Combo Update from Apple Downloads.)
    Boot from the OS X Installer Disc One that came with the computer. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities (Installer menu if using Panther or Jaguar) menu. After DU loads select the startup volume from the left side list then click on the Erase tab. Set the format type to Mac OS Extended (Journaled) then click on the Options button. Select the one pass Zero Data option and click on the OK button. Then click on the Erase button.
    Note: You can skip the Zero Data option if you are not concerned about removing sensitive personal data from the hard drive. If you choose to skip this part of the process then it is possible for others to recover data from the hard drive. The Zero Data procedure will prevent others from getting access to your personal information.
    This process will take 30 minutes to several hours depending upon the size of the hard drive. After formatting has completed quit DU and return to the installer. Now complete the OS X installation. At the completion of the installation do not restart the computer. Instead just shut it off. The next user will be presented with the Setup Assistant when they turn on the computer just as it would if new out of the box.
    https://discussions.apple.com/message/12364050?messageID=12364050#12364050

  • I want to connect a Mac mini to a Samsung 40", Whats the best way to do this?

    I want to connect a Mac mini to a Samsung 40" LED tv to use as the monitor, whats the best way of doing this?

    Understand that there is one HDMI port on your TV that is specifically designated for PC connectivity. The order that the TV or Mini are powered on may determine your results. For your specific TV model, check buyer reviews on Amazon or elsewhere that can include optimum TV/Computer settings adjustment for improved viewing results.

  • When I'm done with my fcp sequence, whats the best way to get it to dvd?

    When I'm done with my fcp sequence, whats the best way to get it to dvd?

    The advice to go to Compressor left out the part that you may want to convert your audio to AC3 becaus ethe MPEG2 bitrate is probably too high for DVD specs.
    This method is in the DVDSP manual and it's in the Compressor manual, both difficult to locate, but easily searchable.
    Here's what I'd do: Export the timeline form FCP in the native sequence settings, self-contained. Bring that self-contained movie into DVDSP and let DVDSP handle the transcode.
    The advice to go to iDVD is even easier.
    bogiesan

  • Whats the best way to get dvd onto 5800

    Peoples,
    I'm strugglin to get DVD onto my noka 5800. It's not obvious in the user manual and looking around the web i need to 'convert' it to the fim on.
    Please does anybody have an easy, fool proof way of doing this??????
    Message Edited by blueleaches on 21-Aug-2009 06:02 PM

    If its possible there should be some walkthrough's on google. 
    http://www.lmgtfy.com/?q=whats+the+best+way+to+get+dvd+onto+5800 

  • Whats the best way to get a big text file in a CLOB variable?

    Hi,
    I have a very premitive type of question.
    I have a big text file, say 30 MB, in a Unix directory (Solaris). I want to get the whole text of that file in a CLOB variable.
    I saw the procedure dbms_lob.loadfromfile/loadclobfromfile. In both these cases, according to the documentation, the target where is collect the data will be a BLOB and not a CLOB. So, I have to convert that blob into a clob.
    If I want to avoid all this conversion process, whats the best way to get a text from a file into a CLOB variable?
    Please suggest.
    Regards

    In addition, LoadFromFile is overloaded to handle both BLOB and CLOB:
    PROCEDURE LOADFROMFILE
    Argument Name                  Type                    In/Out Default?
    DEST_LOB                       BLOB                    IN/OUT
    SRC_LOB                        BINARY FILE LOB         IN
    AMOUNT                         NUMBER(38)              IN
    DEST_OFFSET                    NUMBER(38)              IN     DEFAULT
    SRC_OFFSET                     NUMBER(38)              IN     DEFAULT
    <BR>
    PROCEDURE LOADFROMFILE
    Argument Name                  Type                    In/Out Default?
    DEST_LOB                       CLOB                    IN/OUT
    SRC_LOB                        BINARY FILE LOB         IN
    AMOUNT                         NUMBER(38)              IN
    DEST_OFFSET                    NUMBER(38)              IN     DEFAULT
    SRC_OFFSET                     NUMBER(38)              IN     DEFAULT

  • Im having trouble with my ipad mini in regards with the icloud back up notification; if i press "ok" it doesnt dis appear, i couldn open my ipad/turn off because of this notification; whats the best way to get rid of this? please help

    im having trouble with my ipad mini in regards with the icloud back up notification; if i press "ok" it doesnt dis appear, i couldn open my ipad/turn off because of this notification; whats the best way to get rid of this? please help

    Have you tried a soft-reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Whats the best way to move files from a hard drive that wont boot?

    I made a bootable USB disk and it appears to work fine. I can still read and open files on the old disk (admin account only) from the new USB drive the old one doesn't boot. I don't have a backup but would like to move files to the USB and then reformat the old drive. 
    Whats the best way to capture the data?
    There are four user accounts on the old drive. Only one on the new drive so far. Do I need to set up four accounts on the new drive in order to copy data from each?

    Time Machine is for making backups and restoring ones it previously created. It doesn't restore data backed up or copied in other ways. In your case, it's better to use a cloning utility or manually drag the files than it is to use Time Machine.
    (124317)

  • Whats the best way to create USER variable in BI Apps?

    I have just installled BI Apps and am trying to integrate EBS R12 with OBIEE 11g
    We have USER variable already defined in the BI Apps rpd.
    In EBS Security context init block i need to define USER variable, but when i define it... it says *'USER' has already been defined in the variable "Authentication"."USER"*
    Whats the best way to create USER variable for EBS Security Context init block?
    1) Delete the existing USER variable and then define a new one ( in this case all the places where USER variable is getting used in the rpd would become <missing>)
    And i was told that it should not be done.
    Let me know how can it be done.
    Thanks
    Ashish

    Disable existing Init block and then double click on USER variable and hit on NEW... button to create new Init block
    Thanks
    Edited by: Srini VEERAVALLI on May 1, 2013 4:18 PM

  • Using final cut studio what the best way of getting a mini disc in to FCP?

    I do some weddings and record some audio on to a mini disc recorder ( the small ones . On my avid liquid edit suite I just used to run it in live or ingest it on a 2 hour timer, and just record audio.
    What the best way to do it with final cut studio and final cut pro?

    Is there a reason you can't do the same on your mac system? What outputs does the audio recorder have?
    Jerry

Maybe you are looking for