Whats the difference between extending the xls mapper functions and xpath
What is the whole deal about extending the xlst mapper functions or the xpath functions?
any insight about the diferences would be greatly appreciated. I mena shouldnt the functions for xlst be the sames that are available for xpath?
regards,
gabs
Unfortunately, XPath and XSL are two different standards, and the implementation of functions at the Java level uses a different interface. So a custom XPath function is not automatically reusable in XSL and vice versa.
The core java code might be the same, but you need to code different "wrappers" for XPath and XSL.
Marc
Similar Messages
-
What's the difference between "Extend" or "Join" a wireless network?
I have a Time Capsule as my main base station and an Airport Express I'd like to use on another floor of my home for an internet connection for my Blu-ray player and to stream music via Airtunes. If I connect the Express to the Blu-ray using Ethernet and to my speakers with an audio cable, should I set up the Express to Extend or Join my network? What's the difference between "Extend" or "Join" a wireless network?
If I connect the Express to the Blu-ray using Ethernet and to my speakers with an audio cable, should I set up the Express to Extend or Join my network?
Extend.
What's the difference between "Extend" or "Join" a wireless network?
When you configure the AirPort Express Base Station (AX) to "join an existing wireless network" it will perform like any other wireless client (laptop, printer, etc.) that connects to that wireless network. It will NOT perform as a router nor extend the wireless range of (in this case) the Time Capsule (TC).
However, if you configure the AX to "extend a wireless network" it will perform as an additional wireless access point to your TC's wireless network, effectively extending the TC's wireless range. In addition, the AX's Ethernet port will also be enabled and you can connect a single Ethernet client or multiple ones if you connect an Ethernet switch instead. -
The Difference between Extending a Wireless network and WDS?
I have an Extreme (n) and an Express (n).
I want to make sure the signal is strong upstairs and share a printer (connected to the express) and use AirTunes. I also may add an external drive to the Extreme.
What's the difference between Extending a Wireless Network and using WDS? Will there be a speed difference?
Message was edited by: J. Christopher EdwardsI think you don't get it
If I have another draft N router that operates at 2.4G and I have only n devices I can still use WDS and it will connect using draft n in the 2.4G band.
If one g device connects to the network will go in mixed mode.
The AEBS will still report 130 Mbps for your n clients and 54 for your g clients.
If the other router is g only obviously you can't connect between the two router at n mode but still the AEBS will be in mixed mode and not in g. The Extreme will still report 130 Mbps for the connected n clients.
I can tell you that because I have actually implemented it am not taking off the documentation.
The same device if I try to use the "extend n network" does not even see the AEBS but will happily keep the n in the WDS mode and though the bandwidth is halved it is still more than g.
In any case enough for this! -
What the difference between u0093Valuate GL Account Open Itemsu0094 and u0093Valuate G/
hi gurus
What the difference between Valuate GL Account Open Items and Valuate G/L Account Balances?
We found out that when we perform valuate GL account Open items there will be reversal done at the same time whereas when we perform Valuate G/L Account Balances there is NO reversal posting even though we hv entered the reversal posting date and Period.
Pls advise which one we should perform?Valuate GL Account Open Items are for open item managed accounts including vendor/customer accounts. The valuation is performed for each (open) line items on key date specified.
"Valuate GL Balance" is for account NOT managed on Open Item basis but managed in foreign currency. The period balance of key date in foreign currency is valuated. Reversal document can be created by selecting 'Reverse postings' in "Postings" tab.
Kyoko -
What is the difference between credit memo in invoice year and in next year
Hi!
I'm new here.I'm study SAP ERP.I don't know what is the difference between credit memo in invoice year and credit memo in next year (asset accounting).Can you show and give me an example, please!
Thanks and best regards!
Edited by: dinhtuan on Jun 28, 2010 3:10 PMHi,
Maybe have a look at the SAP Help for further information (http://help.sap.com) : e.g. 'Posting Credit Memos Integrated with Vendor' or 'Posting a Credit Memo Offset Against a Clearing Account'
Transaction type 105 for credit memo on current acquisition made in the current year, posting key 75. Or transaction type 160 for credit memo on acquisitions from prior years. posting key 75.
Note: determine if the asset was acquired in the current fiscal year or in a closed fiscal year (Display asset values).
If the asset was acquired in a fiscal year that is now closed, correct the past depreciation using a write-up (in that case check out and refer to Posting Write-Ups).
I hope this helps.
Kind regards,
Brigitte -
What is the difference between these two reports MC.1 and MB5L
Hi
what is the difference between these two reports MC.1 and MB5L?
what is the Purpose of each report?
Material ledger is activated for this plant, we found some amount difference between these two reports, my client accounting department used to compare these two reports while year end/month end closing
Thanks
RajuMC.1 will give you the report for plant analysis as per plant .
MB5L report will give you list of stock value as per G/L account wise. -
Whats the difference between a loop at where cndition and a read statmnt
Hi.
Whats the difference between a loop at where cndition and a read statmnt??
The read statement fails but the loop at where cond works fine...
READ TABLE t_stpo INTO wa_stpo
WITH KEY idnrk = wa_keko-matnr
BINARY SEARCH.
LOOP at t_stpo into wa_stpo where idnrk = wa_keko-matnr.
endloop.
Why is it so??Hi..
Check out the Differences below.
<b>SORT T_STPO BY MATNR.</b>
<b>READ TABLE t_stpo INTO wa_stpo
WITH KEY idnrk = wa_keko-matnr
BINARY SEARCH.</b>
The READ TABLE statement reads a single record from internal table.
Binary search can be used to optimize the Search time based on key.
But Sorting is must before using BINARY SEARCH.
Always use READ TABLE When u need a single row from internal table.
Bcoz it will not process all the records of internal table.
<b>LOOP at t_stpo into wa_stpo where idnrk = wa_keko-matnr.
endloop.</b>
The above LOOP .. ENDLOOP statement using WHERE Condition is used when there can be multiple rows satisfying the Condition.
It will actually Processes all the Records in internal table and returns only the records matching the condition.
So it will always take more time.
<b>Reward if Helpful</b> -
What Is The Difference Between Save As Self-Contained Movie and Exporting
What Is The Difference Between Save As Self-Contained Movie and Exporting a Video as a Quicktime File
Save As places the file inside a .mov container. No re-encoding.
Your still have the option to save this file as "self-contained" (all the parts travel with the file) or "reference" (small file sized movie that merely "points" to the movie parts).
A reference movie can't play if the source files can't be found. If they are moved or deleted the reference movie will fail and it can't be re-created.
Exporting is done to convert one QuickTime format to another. Typically you do this with a high quality source file. Exporting previously compressed files is a bad idea that leads to unpredictable results.
QuickTime doesn't open WMP formats without third party software help (Flip4Mac is one). You can't convert (export) WMP formats without paying extra fees to upgrade their software. -
Whats the difference between RFC destination of type "HTTP" and "TCP/IP"
Hi Folks,
I want to know the difference between RFC destination of type "H" and "T".
In what instances/tasks we would use them?
Looking forward for your valuable answers...
Cheers,
Ram.Type of RFC connection.
By entering the type of RFC connection, you specify the communication method (TCP or SNA) and the logon type in the target sys
Type T (TCP/IP) destinations are connections to external programs that use the RFC API to receive 'Remote Function Calls'. You must specify the host name and the pathname of the program to be started. The communication method depends on how you select the program location.
Type H is the HTTP connection to R/3 system
Type G is the HTTP Connection to external server -
What's the difference between HP Wireless G Print Server and HP Wireless Printing Upgrade Kit?
Hello!!
What’s the difference between HP Wireless G Print Server and HP Wireless Printing Upgrade Kit?
I found two things as follows.
1. MAC support
2. USB dongle
Is there anything else?Now I’m clear!!
But there are descriptions for each on your home page over view tab. Due to this forum restriction; I cannot put the URL here.
They say for each as follows.
HP Wireless Printing Upgrade Kit --- Retain full all-in-one wireless functionality: print, fax from your PC, scan, and access photo memory cards access and PC status
HP Wireless G Print Server --- Get the same functionality with your all-in-one: printing, scanning, photo memory card access, PC faxing, and printer statusSo I got confusion, that’s why I did not get the difference for them.
And I found wrong description on your HP support document page. I recommend that you correct it, because it put consumer into confusion and break to buy this product.
The title is “HP Wireless Printing Upgrade Kit - Setting up the HP Printer with the HP Wireless Printing Upgrade Kit in Windows .”
The wrong description is “NOTE: You must turn on the computer with the computer adapter in order to print to the wireless product” at last line of “Step two: Configure other computers to use the printer. “
You can erase this line!! -
what is the difference between i pod touch 4th generation and 5th generation because i am choosing what to buy
5 has hd FaceTime, 4 does not, 5 has 5x better camera with flash, 5 is faster, has bigger and better screen and has siri, 4 does not. Also, 5 comes in more colours and has wriststrap (also 5 comes with better earphone and has smaller, reversible and faster charging connector)
-
What is the difference between acquiring lock on a CLASS and OBJECT (instance) of that class
What is the difference between acquiring lock on a CLASS and OBJECT (instance) of that class
The Java Tutotials has several trails that discuss both implicit and explicit locking, how they work and has code examples.
The Concurrency trail has the links to the other sections you need to review
http://docs.oracle.com/javase/tutorial/essential/concurrency/index.html
The Synchronized Methods and Intrinsic Locks and Synchronization trails discusse Synchronized Methods and Statements
http://docs.oracle.com/javase/tutorial/essential/concurrency/syncmeth.html
And the Lock Objects trail begins the coverage of explicit locking techniques.
http://docs.oracle.com/javase/tutorial/essential/concurrency/newlocks.html -
What's the difference between task list release for order and release for c
What's the difference between task list release for order and release for cost?
Pallavi,
The status of the task list determines in which other application areas the respective task list may be used.
Release for costing: means that the task list can be used to calculate costs in Transaction IA16 i.e. the costs for the task list operations would be calculated if released for costing status is set.
Release for use in the order: Released for Order means that you can use the task list in an order i.e. you could include operations from a task list in an order.
Regards,
Usman -
What is the difference between BO Designer connect BW QUERY and BW CUBEuFF1F
HI friend,
What is the difference between BO Designer connect BW QUERY and BW CUBE?
which one is better?
Best regards.
HowardHi Howard,
You can use autorization variables in SAP BW and maitain the security there, using that you can apply diferent security not only at Infoobject levet you can apply security per BEX Query.
Here is some informaion about BEX and SAP BusinessObjects
BI metadata feature _______SAP OLAP BAPI support level
Characteristics (incl. Time and Unit)_______ InfoCube/BEx Query
Hierarchies_______ InfoCube/BEx Query
Basic Key Figures_______ InfoCube/BEx Query
Navigational Attributes_______ BEx Query only
Display Attributes_______ InfoCube/BEx Query
Calculated Key Figures / Formulas_______ BEx Query only
Restricted Key Figures_______ BEx Query only
Custom Structures_______ BEx Query only
Variables_______ BEx Query only
I hope this help you.
BEst regards,
Fede -
What is the difference between Fiscal year variant, Fiscal year and Calyear
hi,,
What is the difference between
1. Fiscal Year Variant (0FISCVARNT)
2. Fiscal Year (0FISCYEAR)
3. Calendar Year (0CALYEAR)
In what scenarios they should be used. If we are getting 0FISCVARNT data from ODS. Can we change into other in cube at update rules level or some other level?
How can we get factory calendar????
Message was edited by:
Avneet MHi Gurus
I was going through this thread and came up some more questions in my mind.
1. Do we need to set Fiscal Year, Fiscal Varient settings once for all in BW ? ( The path is given in one of the thread above ) need to know if this is one time setting / rebuilding the tables. what will happen when we select and execute factory calender and Fiscal Varient and Rebuild tables in transfer global setting ? Is this one time we have to do for whole BW system?
2. when we go to SCAL t-code what we need to do and what it do in the system ? I know its for Factory calender but just want to know what it does. It it also for one time during BW build phase ?
3. How can we link Factory calender and Fiscal year? IS it thro Fiscal varient ?
Pl help me to clear this doubt,thanks in advance.
Maybe you are looking for
-
Apex listener images deployement
Hi I installed the APEX listener recently. I have a question. Can I deploy the images in a different way other than jar them and then deploy to WLS. I have a lot of custom images/javascripts reside under the /i/ virtual path (e.g. /i/extjs). The imag
-
I purchased extra icloud storage to back up my phone and phots. Purchased a new phone and went to pull my photos from icloud and only a portion trasferred to my new phone. How do I get all of the photos moved to my new phone?
-
[SOLVED] How do I disable enp0s3?
I am trying to remove unwanted services from boot, specifically enp0s3 which I don't use as I don't have a ethernet card. This is my start up time analysis: $ systemd-analyze blame 24.503s [email protected] 1.625s systemd-logind.service 1.580s al
-
Getting ORA-20001: Creation of new object is not allowed: !!
Hi Am getting ORA-20001: Creation of new object is not allowed while enabling constraints after importing the dumps from source to target datbase,can anyone assist me to fix this issue.
-
Adobe create suite 64-bit related queries
Hi, I have following couple of questions related to 64-bit support in Adobe Products. 1. Would like to know Adobe Illustrator CS3,CS4 and CS5 support 64-bit? 2. Would like to know Adobe Photoshop CS3,CS4 and CS5 support 64-bit? 3. Heard that CS5 woul