Whats the difference bewteen the latest 30gb and the older 1?

whats the difference bewteen the latest 30gb and the older 1?

I think you will find the battery life only changed
for the 60/new 80 and not the 30 either for the 1st
5th gen or 2nd.
Actually this is not accurate. Playback time for music wasn't changed, but video playback went from 2 hours to 3.5 hours. Much of this was due to some hardware changes between the newer and older 5g iPod's. Also battery life leaving the display on a low setting has very little impact on the newer iPod compared to the older one. So, they are different, no doubt about it.

Similar Messages

Other than the retina display how may I tell the difference bewteen an iPad 2 and a iPad 3?

Other than the retina display how may I tell the difference bewteen an iPad 2 and a iPad 3?

Here's the various iPad model numbers and order numbers. The model numbers are on the back of the iPad
Apple iPad Wi-Fi (Original) 16, 32, 64 GB
The wi-fi only iPad configurations are assigned model number A1219.
MB292LL/A is the order number for the 16 GB configuration. The 32 GB configuration is assigned MB293LL/A and the 64 GB configuration is assigned MB294LL/A.
Apple iPad Wi-Fi/3G/GPS (Original) 16, 32, 64 GB
The Wi-Fi/3G/A-GPS iPad configurations are assigned model number A1337.
MC349LL/A is the order number for the 16 GB configuration. The 32 GB configuration is assigned MC496LL/A and the 64 GB configuration is assigned MC497LL/A.
Apple iPad 2 (Wi-Fi Only) 16, 32, 64 GB
The wi-fi only iPad 2 configurations are assigned model number A1395.
MC769LL/A is the original order number for the 16 GB configuration in black. The 32 GB configuration in black is assigned MC770LL/A and the 64 GB configuration in black is assigned MC916LL/A. The original 16 GB, 32 GB and 64 GB configurations in white are assigned MC979LL/A, MC980LL/A, and MC981LL/A, respectively. On March 7, 2012, Apple discontinued the 32 GB and 64 GB configurations and assigned new order numbers of MC954LL/A and MC989LL/A for the black and white 16 GB configurations, respectively.
Apple iPad 2 (Wi-Fi/GSM/GPS AT&T) 16, 32, 64 GB
The Wi-Fi/GSM/GPS iPad 2 configurations are assigned model number A1396.
MC773LL/A is the original order number for the 16 GB configuration in black. The 32 GB configuration in black is assigned MC774LL/A and the 64 GB configuration in black is assigned MC775LL/A. The original 16 GB, 32 GB and 64 GB configurations in white are assigned MC982LL/A, MC983LL/A, and MC984LL/A, respectively. On March 7, 2012, Apple discontinued the 32 GB and 64 GB configurations and assigned new order numbers of MC957LL/A and MC992LL/A for the black and white 16 GB configurations, respectively.
Apple iPad 2 (Wi-Fi/CDMA/GPS Verizon) 16, 32, 64 GB
The Wi-Fi/CDMA/GPS iPad 2 configurations are assigned model number A1397.
MC755LL/A is the original order number for the 16 GB configuration in black. The 32 GB configuration in black is assigned MC763LL/A and the 64 GB configuration in black is assigned MC764LL/A. The original 16 GB, 32 GB and 64 GB configurations in white are assigned MC985LL/A, MC986LL/A, and MC987LL/A, respectively. On March 7, 2012, Apple discontinued the 32 GB and 64 GB configurations and assigned new order numbers of MC755LL/A and MC985LL/A for the black and white 16 GB configurations, respectively.
Apple iPad 3rd Gen (Wi-Fi Only) 16, 32, 64 GB
The Wi-Fi Only iPad 3 configurations are assigned model number A1416
MC705LL/A refers to the 16 GB configuration in black. The 32 GB and 64 GB configurations in black are MC706LL/A and MC707LL/A, respectively. The 16 GB, 32 GB and 64 GB configurations in white are MD328LL/A, MD329LL/A, and MD330LL/A, respectively.
Apple iPad 3rd Gen (Wi-Fi/4G LTE AT&T/GPS) 16, 32, 64 GB
The Wi-Fi/4G LTE AT&T/GPS iPad 3 configurations are assigned model number A1430
MD366LL/A refers to the 16 GB configuration in black. The 32 GB and 64 GB configurations in black are MD367LL/A and MD368LL/A, respectively. The 16 GB, 32 GB and 64 GB configurations in white are MD369LL/A, MD370LL/A and MD371LL/A, respectively
Apple iPad 3rd Gen (Wi-Fi/4G LTE Verizon/GPS) 16, 32, 64 GB
The Wi-Fi/4G LTE Verizon/GPS iPad 3 configurations are assigned model number A1403
MC733LL/A refers to the 16 GB configuration in black. The 32 GB and 64 GB configurations in black are MC744LL/A and MC756LL/A, respectively. The 16 GB, 32 GB and 64 GB configurations in white are MD363LL/A, MD364LL/A, and MD365LL/A, respectively.
 Cheers, Tom

What is difference between ADF Task Flow and Faces-Config - when delpoy ?

What is difference between ADF Task Flow and Faces-Config? When I create navigation between pages with ADF task flow then the navigation don't work when I deploy my application to Weblogic 10.3. When I use default server then navigation works fine. With Faces_config in both situations all works ok - on Stanalone server and default.
Where is the problem?
Best regards!

Shay, I don't use both faces-config and adf task flow! When I failed with task flow I tried faces-config.
I have active on my weblogic - adf.oracle.domain(1.0,11.1.1.0.0). This is the right ADF? If yes then where is the problem?
Best regards!

What is difference between data base structure and stucure in program

what is difference between data base structure and stucure declared in program level . can explain cleary if knows

Hi,
Data base structure is global decalaration you can reffer this structure in any of your developments, when ever you cahange this structure the changes automatically will get updated in all the programs.
coming to structures in program it is local to your program only, if you want to change the structure again you have to open the program and do the necessary changes.
Reward if useful.
Thanks,
Sreeram.

What is difference between 4.7c BW and R/3 s/w

what is difference between 4.7c BW and R/3 s/w

Please refer
You can find the difference in release notes of each SAP version.
Here are the links.
http://help.sap.com/saphelp_47x200/helpdata/en/fc/e3003deddfae4de10000000a114084/frameset.htm
http://help.sap.com/saphelp_scm50/helpdata/en/28/b34c40cc538437e10000000a155106/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
https://www.sdn.sap.com/irj/scn/wiki?path=/display/erp6/sapERP6.0+Upgrade
https://www.sdn.sap.com/irj/scn/wiki?path=/display/erp6/transactionsChangedinECC6.0
Please check the below link for the differences between the two releases..
http://solutionbrowser.erp.sap.fmpmedia.com/Default.aspx
Select the source and target versions of release and the solution area and the module...you will get the list of all the differences.
I hope it will reach your req.
Regards
Chandra

What is difference 4.7 business area and ECC6 business areas

hi
plz tell me what is difference 4.7 business area and ECC6 business areas
thank u
shusma

Different is there for 4.7 & ECC
Ex: you select Business area Zero Chebox in ECC .
1 - Debit Balance and Credit Balance should be the same with Business Area
Expences Dr MUM 500
Cash CR MUM 500
Business Area MUM it should be the Zero
2 - In 4.7 System not control Business Area wise Zero Values
Expences Dr MUM 500
Cash CR HYD 500
System not control BA wise Balances
Regards,
Viswa

What is difference between Audigy 2 LS and Audigy 2

As topic say what is difference between Audigy 2 LS and Audigy 2 ZS?
I sow Audigy 2 LS in my local store but cant find info on creative.com about it.

Z_unit,
The Audigy 2 ZS is our current top of the line audio card. It supports DTS decoding and is capable of 7. output. I am not aware of an Audigy 2 LS, however we have an Audigy LS which is a 5. capable sound card that is based on our original Audigy's features. Was the card that you were looking at in a retail box or was it in a brown box?
Jeremy

What is difference between 4.6c version and 4.7ee version

Hello to all,
Pls, help me.
what is difference between 4.6c version and 4.7ee version?
It is urgent tommorow I have an interview.
thanks & regards,
raju.

Hi
Check these links
You can find the difference in release notes of each SAP version.
Here are the links.
http://help.sap.com/saphelp_47x200/helpdata/en/fc/e3003deddfae4de10000000a114084/frameset.htm
http://help.sap.com/saphelp_scm50/helpdata/en/28/b34c40cc538437e10000000a155106/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
One major difference is that 4.6 runs on what they call the basis layer, in 4.7 the basis layer was majorly modified to include new web technologies, hence the renaming of Basis to Web Application Server. 4.7 runs on the Web Application Server 6.20. With this, was the introduction to BSPs or Business Server Pages.
Also have a look at the link:
http://www.thespot4sap.com/Articles/SAP_Enterprise_4point7.pdf
Here is a quick short list though:- Statements for character processing have additions IN BYTE MODE and IN CHARACTER MODE, this affects statements like DESCRIBE LENGTH, OPEN DATASET
Header lines should not longer be used for tables (in OO context this is not even possible)
TABLES statement in reports should no longer be used
PNPCE for concurrent employement (new logical DB for HR)
For OO abap there a plenty of short forms for method calls that were not previously available.
One very cool feature is that data reference's can have actual data types and van be referenced directly without field symbols.
Additions to many abap statements, for example there is now a ALL OCCURENCES addition to the replace statement.
Class based exceptions are now available (although it is debatable how usefull these are seeing as there is no FINALLY part to the try catch statement, very disappointing but maybe that is just me).
Friends have been introduced for OO abap.
Dynamic program has plenty of improvements, for example there is now a TYPE TABLE OF variant for create data which lets you dynamically create an internal table with a structure type, your can also now call a class constructor with different importing parameters dynamically.
Regards
Kiran

What is difference between oracle 8i ,9i and 10g

i want to know what is difference between oracle 8i ,9i and 10g with explain.

Differences between 9i and 10g
http://download-west.oracle.com/docs/cd/B14117_01/server.101/b10750/toc.htm
http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14214/toc.htm
... between 8i and 9i
http://download-west.oracle.com/docs/cd/A91202_01/901_doc/server.901/a90120/toc.htm
http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96531/toc.htm

What is difference between G50-70 442243 and G50-80 80L0006CIN?

What is difference between G50-70 442243 and G50-80 80L0006CIN? Both listed same specification. and same price tag. I am planning to purchange one but which one is better?

There are 2 RAM slot in this laptop model. You can extend RAM upto 16 GB.

Hello,i have been finding problem to even open itunes.i know what have installed now is latest version and i could not open itunes in my laptop which resulted in big frustration.can anybody step in to help me for which i will be thankful to you.

Hello,i have been finding problem to even open itunes.i know what have installed now is latest version and i could not open itunes in my laptop which resulted in big frustration.can anybody step in to help me for which i will be thankful to you.when i double click itunes software,it never responds even with or without iphone 4s connection with my windows 7 laptop.

miraculous...i downloaded quicktime player from apple website and then i run it.upon double click on this quick time player and then i double clicked on itunes...there comes an enry of itunes software...now i am completely enjoying my musics.photos in smart phone.
Thanks a Lot

What is differences extraction queue, delta queue and uddate queue ?

hi guru's
What is differences between extraction queue, delta queue and uddate queue ? can u describe briefly?
Thanks & Regards
nandi

Dear Prabha,
Basically when any document is posted in R/3, it is updated to the update table, from there it is taken to our delta queue for send it to BW side.
When extraction starts, data is sent to BW from delta queue. then again this cycle starts.
When you post any document in OLTP system (eg SAP R3),
say create sales order by VA01, then posting is made to application tables (VBAK/VBAP) through V1 and also to sm other tables through V2, Communication structure written to update queue/extraction queue/delta queue(directly) as per the update mode selected. V3 is always followed by V2 and we are supposed to schedule it.
From this delta queue, data is extracted by BW infopackages.
There are various update methods according to which extraction or delta queue are used, so when document posting takes place it also write data into extraction queue (through V1 update) and if we use queued delta method then this data is collected in collection run and written to delta queue and from this delta queue we request for data from BW.
There are lots of posts on SDN for this, please have a look on those.
one for your reference...
https://www.sdn.sap.com/irj/sdn/profile?userid=3507509
Hope it helps...
Message was edited by:
Ashish Tewari

What is difference btw schema.core.xml and schema.user.xml in OVD

Hi
New to OVD, I'm looking at Oracle's OVD configuration properties Docoument
I'm confused with list of schema files on OVD especially difference between schema.core.xml and schema.user.xml
In the oracle document it mentioned as below.
Typically, the last file identified is schema.user.xml. Any and all changes to schema are applied to the schema.user.xml file to ensure standard files, such as schema.core.xml, remain unchanged between releases, but can also be virtually modified by having the changes in schema.user.xml override default-shipped schema in schema.core.xml.
If you are installing a manufacturer supplied schema (in DSML form), identify this file in the second to last file in the list of schema files. This will protect the distributed manufacturer file from modification while allowing local customization, which is then stored in schema.user.xml.
Based on above two paragaraphs i came to one understanding but i just want to hear from you what exactly its trying to say about those two files.
Not sure what exactly above mean can someone explain lettle in detail

Hi,
The LDAP schema used by OVD is shipped as several XML files such as schema.core.xml, schema.cosine.xml, schema.inetorperson.xml, schema.nis.xml etc. depending on in which RFC the attribute and object classes are defined.
All changes to these schemas (if any) are always applied to schema.user.xml, so this file contains all the custom attribute types & objetclasses.
Hope this clarifies a bit
Sylvain
When closing a thread as answered remember to mark the correct and helpful posts to make it easier for others to find them

What is difference between Service map iview and Workset Map iview

Hi Experts,
Can anyone tell me the difference between service map iView and Workset Map iView.
When I am creating these iViews, its seams both are same. I canu2019t find difference still, can anyone help me out of this
Thanks in Advance
Janardhan

Hi,
Service Map Iview:The Service Map iView is an ERP-specific variant of the portal Workset Map iView. It serves as a central point of entry and guided access to the services of SAP service modules such as the Manager Self Service (MSS) module, or the Employee Self Service (ESS) module.
Workset Map iview:A Workset Map is the equivalent of a site map, providing users with explicit information on the functionality that is available in a given workset. It is based on an iView, and serves as a central point of entry and guided access to the contents of a workset.
if you want to more info pls go thr the below thread
Workset Map iView
i hope it will help you
Thanks,
Sreeni.

What is difference between tha master data and tranction data

Hi, Gurus
this is sudhakar
i want to no what is the difference between the transaction data and master data give with examples .
Thanks
sudhakar

Hi,
The most important data classes are master data, transaction data, organizational data and system
data.
Master data is data that is rarely modified. An example of master data is the data of an address file, for
example the name, address and telephone number.
Transaction data is data that is frequently modified. An example is the material stock of a warehouse,
which can change after each purchase order.
Organizational data is data that is defined during customizing when the system is installed and that is
rarely modified thereafter. The country keys are an example.
System data is data that the R/3 System itself needs. The program sources are an example
for more info go through..
[http://help.sap.com/saphelp_nw70/helpdata/]
regards,
NR

Whats the difference bewteen the latest 30gb and the older 1?

Similar Messages

Maybe you are looking for