Whats the encryption method & cipher strength that I should choose?

Whats the encryption method & cipher strength that I should choose if I deploy the mbam to both Windows 7 and Windows 8 computers?
Jason

Well, the answer is- it depends.
What is the objective of your encryption? with 128  AES; the bits used to encrypt data is lesser than that of 256 AES so you are more secure with 256 AES than if you have selected 128 AES; the flip side is this- since data encryption and decryption
is done on the fly when the machine is booted up; performance penalty- how minuscule it is will be more in the drives that are encrypted with 256 AES. 
Mayank Sharma Support Engineer at Microsoft working in Enterprise Platform Support.

Similar Messages

  • What is the encryption rate/cipher strength for Firefox 3.6.13?

    need to find encryption rate

    Firefox supports TLS1.0/SSL 3.0 using (at least):
    3DES (56*3bit)(Paypal)
    RC4 (128bit)(Google , and etc)
    AES128/256(most commonly used)
    Camellia (256bit)(Geotrust, and etc)
    All of them are literally safe, with the Electronic certificate system ,RSA/DH cipher key exchange methods, and SHA1 + MD5 cheksum hash algorithm.
    Since SHA1 and MD5 are not strong enough, the higher version of TLS(1.1/1.2) use SHA512 instead.
    See "Transport Layer Security" on wikipedia for detailed information
    http://en.wikipedia.org/wiki/Transport_Layer_Security

  • What is the encryption method for the user's password?

    hi all,
    who knows what is the encryption method for the user's password?
    the password is 803004, and i get the encrypted string "D7EDED84BC624A917F5B462A4DCA05CDCE256EEEEEDC97D59A57930E06CF9781E022CC8E430FF04E"
    thanks,
    dan

    There is no default password for a guest user unless you've created one:
    (screenshot from the System Pref Guest User Pane)

  • I can't send email from my iPad. I am from Australia but on holidays in Greece. Does anyone know what is the smtp outserver for Greece that I should use?

    I can't send email from my iPad. I am from Australia but on holidays in Greece. Does anyone know what is the smtp outserver for Greece that I should use?

    As you haven't told us who your email provider is, no.
    There isn't an SMTP server for Greece - it is either provided by your email provider, or the Internet provider you are connected through.

  • HT1444 I have desktop dual 2.3 ghz PowerPC G5,2GB DDR2 SDRAM, running Mac OS X 10.4.11.  What the highest or latest OS that this model can run? Thank you very much

    I have desktop dual 2.3 ghz PowerPC G5,2GB DDR2 SDRAM, running Mac OS X 10.4.11.  What the highest or latest OS that this model can run? Thank you very much

    Leopard requirements/10.5.x...
        *  Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
    minimum system requirements
        * 512MB of memory (I say 1.5GB for PPC at least, 2-3GB minimum for IntelMacs)
        * DVD drive for installation
        * 9GB of available disk space (I say 30GB at least)
    Classic/OS9 Apps no longer supported.
    Trouble is Apple no longer sells it, check eBay & such for the Retail version, not the Gray Discs...
    http://www.ebay.com/sch/i.html?_nkw=mac+os+x+leopard+retail+10.5

  • Whats the best method to cut out hair?

    Im using photoshop Cs4 - whats the best method to cut out hair from a background?

    I just had to do a quick search, because I was not sure when the Refine Edge was introduced, but it appears you do have it in CS4.  Check out this tutorial, but ignore all the stuff about paths.  Make a rough selection with Quick select - it shares a location on the tool bar with the Magic Wand, so don't confuse the two.
    Having made the rough selection, open Refine Edge.  I remember it took me a while to get the hang of it, but tutorials will help
    http://www.youtube.com/watch?v=bxKPUW1vYEg
    The above tutorial deals specifically with CS4.  This next one is probably the best real world use of Refine Edge I've seen, because it uses a difficult subject (as opposed to the easy selections so many tutorials fob you off with)
    http://www.youtube.com/watch?v=ssJRkbkHAa4

  • Log onto incoming mail server (POP3): Your server does not support the connection encryption type you have specified. Try changing the encryption method. Contact your mail server administrator or Internet service provider (ISP) for additional assistance.

    Hi All,
    This is my first post to ms exchange forum am getting  Log onto incoming mail server (POP3): Your server does not support the connection encryption type you have specified. Try changing the encryption method. Contact your mail server administrator
    or Internet service provider (ISP) for additional assistance. in my outlook clients, till last Sunday (12.04.15) my exchange was well & good, Monday morning suddenly the problem started like none of our outlook pop3 clients are able to communicate
    with exchange (rest  IMAP, SMTP & Exchange accounts are working fine). i have tried with all port no but no luck. please help me to get raid of this one.
    Exchange 2013 CU6 with server 2012 Std 64Bit
    Thanks,
    Murali 

    Dear All,
    I have found the solution for above problem, the problem has occur due to PopProxy inactivity
    please find relevant exchange management shell commends below.
    1. Get-ServerComponentstate -Identity <yourmailserver.com> 
    Server Component State
    yourmailserver.com ServerWideOffline Active
    yourmailserver.com HubTransport Active
    yourmailserver.com FrontendTransport Active
    yourmailserver.com Monitoring Active
    yourmailserver.com RecoveryActionsEnabled Active
    yourmailserver.com AutoDiscoverProxy Active
    yourmailserver.com ActiveSyncProxy Active
    yourmailserver.com EcpProxy Active
    yourmailserver.com EwsProxy Active
    yourmailserver.com ImapProxy Active
    yourmailserver.com OabProxy Active
    yourmailserver.com OwaProxy Active
    yourmailserver.com PopProxy Inactive
    yourmailserver.com PushNotificationsProxy Active
    yourmailserver.com RpsProxy Active
    yourmailserver.com RwsProxy Active
    yourmailserver.com RpcProxy Active
    yourmailserver.com UMCallRouter Active
    yourmailserver.com XropProxy Active
    yourmailserver.com HttpProxyAvailabilityGroup Active
    yourmailserver.com ForwardSyncDaemon Active
    yourmailserver.com ProvisioningRps Active
    yourmailserver.com MapiProxy Active
    yourmailserver.com EdgeTransport Active
    yourmailserver.com HighAvailability Active
    yourmailserver.com SharedCache Active
    2. Set-ServerComponentState -Identity <yourmailserver.com> -Component PopProxy -Requester HealthAPI
    -State Active
    3. Get-ServerComponentstate -Identity <yourmailserver.com> 
    Server Component State
    yourmailserver.com ServerWideOffline Active
    yourmailserver.com HubTransport Active
    yourmailserver.com FrontendTransport Active
    yourmailserver.com Monitoring Active
    yourmailserver.com RecoveryActionsEnabled Active
    yourmailserver.com AutoDiscoverProxy Active
    yourmailserver.com ActiveSyncProxy Active
    yourmailserver.com EcpProxy Active
    yourmailserver.com EwsProxy Active
    yourmailserver.com ImapProxy Active
    yourmailserver.com OabProxy Active
    yourmailserver.com OwaProxy Active
    yourmailserver.com PopProxy Active
    yourmailserver.com PushNotificationsProxy Active
    yourmailserver.com RpsProxy Active
    yourmailserver.com RwsProxy Active
    yourmailserver.com RpcProxy Active
    yourmailserver.com UMCallRouter Active
    yourmailserver.com XropProxy Active
    yourmailserver.com HttpProxyAvailabilityGroup Active
    yourmailserver.com ForwardSyncDaemon Active
    yourmailserver.com ProvisioningRps Active
    yourmailserver.com MapiProxy Active
    yourmailserver.com EdgeTransport Active
    yourmailserver.com HighAvailability Active
    yourmailserver.com SharedCache Activ
    Replace yourmailserver.com with your server host name.
    Thanks

  • HT1390 I have tried to move a rental from my MacPro to my iPad. I have done exactly what the prescribed method is and it won't move. Once I hit apply it doesn't transfer, Instead it appears back in iTunes

    I have tried to move a rental from my MacPro to my iPad. I have done exactly what the prescribed method is and it won't move. Once I hit apply it doesn't transfer, Instead it appears back in iTunes

    I have never rented a movie in iTunes and tried to move it to my iPad, but according to the instructions on this website, you click on - Sync.
    http://www.dvd-to-ipad-mac.com/ipad-tutorials/transfer-rented-movie-from-itunes- to-ipad.html

  • I recently upgraded to Lion on an iMac and I am trying to run Garageband but get message telling me that the instrument library is invalid and I should choose a valid Instrument Folder or re-install Garageband. Where do I find such a folder?

    I recently upgraded to Lion on an iMac and I am trying to run Garageband but get message telling me that the instrument library is invalid and I should choose a valid Instrument Folder or re-install Garageband. Where do I find such a folder?

    Thanks very much. Yes, I am using the installer files and serial number from the URL you referenced above. I have spent many hours trying to get it to work. I would love some help!!
    The problem is that the instructions that come in the pdf with the downloaded files do not work, because the files that download from that page do not have the names referred to in the pdf, and most of the things that are referred to in the instructions do not happen. Here is what actually happened.
    When I downloaded the files from the website, these are the files that downloaded:
    I double-clicked each one and they extracted into two different folders.
    Then I read a message on the forum that said to move all the extractred files into the same folder, so I moved all files into one file at C:\Creative Suite CS2\Adobe Creative Suite 2.0 as was pictured in the forum message. Here are screen shots showing all of the files in that folder I have now:
    So then I double clicked the "Setup" file and I got this error message:
    So then I tried to install the programs separately from the installer inside the folders Photoshop and Illustrator. I got this far and entered the serial number from the website:
    But then I got this error message, even though I was using the files and serial number exactly from the website:
    I tried both photoshop and illustrator and the same thing happened.
    (I also looked at Solution 2 that you mentioned above but I don't have anything called VCOM on the computer. Also the error message that I got is not that one.)
    I think I really need a set of instructions that lists the steps in order to do, but based on the files that actually download from the website and what happens when you extract the files. I feel as if I have all of the proper files but it still doesn't work.
    Thank you very much!

  • Whats the best method to deploy sccm 2012 client

    Hello what is the best method to deploy SCCM 2012 client, is there a script that should be used as sometimes the client push fails. In particular pushing the client to server 03 /08/12 types.
    Thankyou
    SCCM Deployment Technician

    Ultimately, the best method is whatever works for you. Every environment is different and has unique constraints and requirements. You first need to learn out each of the methods and what they do to be able to properly evaluate which will work best for you.
    Kind of like mining for gold, who cares how you got it out of the ground, once you get it out, you're rich :-) But if you rely on someone else telling you what the best way was for their mine, you may not be doing it the best way for your mine thus you need
    to geological surveys, exploration, trial and error, etc. In other words, you need to do some real grunt work.
    Often, using multiple methods is best though because each has its pros and cons (yes, even my startup script -- thanks for the cheerleading Michael and Tim). But as mentioned, it all comes down to you learning about your environment and the different
    methods available to make the best choice. If there was only one "best" way to do it, there wouldn't be multiple available and none of us would really be needed.
    Jason | http://blog.configmgrftw.com

  • Whats the slowest MAC out there that can run Creative Cloud?

    I was wondering what the slowest MAC out there is that can run Creative Cloud?

    On the new install with a default Logic Project, kernal_task (activity monitor) shows 600% CPU usage when ideling (no audio or midi playing.
    Logic using 600% or total CPU at 600%?
    If it's total CPU usage and not Logic itself.. check for a runaway mdworker routine... caused by a spotlight bug thats been longstanding and never totally fixed... Resolve by stopping the MDworker routine and then exclude all drives from spotlight.. and add back in just the system drive. Wait a couple of hours for spotlight to properly reindex the system drive and then test with Logic to see if CPU usage drops down to normal levels...
    If it's Logic that is using 600% then something very weird is going on that is specific to your system or install as that simply isn't normal behaviour even with using just the internal hardware and CoreAudio.

  • Show the company I work for that we should have one cluster

    The company I work for have several projects where we are going to use RAC. The issue I'm having is they want each database to be in its own cluster hardware. I'm trying to show then that we should cluster all the hardware together and make small RAC database in the one cluster.
    Does any know of anyone that has written a go doc how why you should have one cluster versus multiple clusters.
    Example of what they are thinking of doing note this is all separate hardware cluster1 will not be cluster with cluster2 I'm try to show them if we cluster it all together we get more power and may not need so much hardware:
    Project 1
    cluster1_dev
    2 nodes
    cluster2_qa
    4 nodes
    cluster3_prd
    4 nodes
    Project 2
    cluster2_dev
    2 nodes
    cluster2_qa
    4 nodes
    cluster2_prd
    4 nodes
    What I’m proposing is the following setup:
    Cluster_dev
    3 nodes
    Project1 instance cluster on all 3 nodes
    Project2 instance cluster on all 3 nodes
    Cluster_qa
    6 nodes
    Project1 instance cluster on all 6 nodes
    Project2 instance cluster on all 6 nodes
    Cluster_prd
    6 nodes
    Project1 instance cluster on all 6 nodes
    Project2 instance cluster on all 6 nodes

    I am always impressed by choosing rac without having expressed what types of failures to be covered.
    maybe you really don't need rac ...
    moreover, rac is imho really not 2 nodes oriented but well grid oriented.
    a lot of small server in the same cluster is for me the way to go or the the way to think.
    Services features were introduced to allow one rac db to be shared by multiple applications.

  • Has anyone tried to sync photos with the cable to itunes rather than how it should work via Wifi with iCloud?  The info on the Apple support page says that you should backup to both iTunes & iCloud, but 2x the Genius Bar told me not to.  Help please!

    Has anyone tried syncing their photos to iTunes with the cable in addition to how it should work via wi-fi on iCloud?  On the Apple support info page, it says you should do both types oof backup. The Genius Bar told me 2x not to do both.  What experiences has the community had?  I'm also having syncing issues with photos most recently as well as contact updates.  (I have an iPhone 4S with the iOS7.1)  Thanks much!

    It sounds like you are mixing up several different things (or not using the terminology that Apple uses).
    One thing is backup. You can backup via icloud or via iTunes and there is no reason you cannot do both -- I do and the second link below from Apple gives instructions. Doing a backup will include photos from the Camera Roll in the backup but you will not be able to see the results -- all of the backup data will be stored on iCloud or on your computer in files that are not designed to be accessed by you for any purpose other than restoring to your phone in the event of a problem. More information on backup:
    http://support.apple.com/kb/HT1766
    http://support.apple.com/kb/HT5262
    If you simply want to transfer photos from an iPhone to a computer, the terminology Apple uses for that is "import" and it is done without iTunes. New photos (taken after you change the setting) can be done via PhotoStream which is a cloud based option. The other option is via cable. Instructions for both: http://support.apple.com/kb/ht4083
    Syncing via iTunes (with regard to photos) is used to transfer photos the other direction -- from the computer to the phone. Instructions for that http://support.apple.com/kb/HT4236

  • FF crashes at start-up; the solution seems to suggest that I should access the help menu on the FF window--which I can't open because it crashes--what am I missing?

    it started on 9/3--worked fine for years before that.
    Sorry to be dumb, but I cannot follow your instructions--they make no sense to me. What is a location bar (to find "about:crashes"). where do I find a crash id? where do I find "help> troubleshooting" to copy and paste information? you could use much better help screens to explain to the averge person what you need.

    If Firefox is crashing as soon as you open it, getting information from inside Firefox is almost impossible. See if Firefox crashes so quickly when you open Firefox in the Firefox SafeMode. Hold the '''Shft''' when you go to start Firefox, don't select anything right now, just use '''''Continue in SafeMode'''''.

  • I'm using XP: What is the latest version of Shockwave that I should be using?

    I keep getting messages that shockwave has quit working. It asks if I want to continue and not. I never know what to do. And, lately I've getting messages that my version of shockwave is old and out of date. Thank you.

    You're More System Details is showing 4 Flash Plugins for Firefox to use.
    Shockwave Flash 11.5 r502
    Shockwave Flash 11.3 r300
    Shockwave Flash 11.2 r202
    Shockwave Flash 16.0 r0
    First, grab the Adobe uninstaller from here to get rid of them all:
    http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-windows.html
    Then download the latest Flash Plugin version ''[when using Firefox]'' from here:
    https://www.adobe.com/products/flashplayer/distribution3.html
    Scroll down that page about 3/4 of the way towards the bottom to the Extended Support Release - Flash Player 13.0.0.269 which probably the best for WinXP.
    Run the Flash uninstaller program, then reboot your PC.
    Then install the Plugin version of Flash. So you'll have a clean installation of Flash for Firefox.

Maybe you are looking for