Whats the highest for the FSB kt3 6380E

Hi, I am wondering if anyone has managed to get the FSB higher than 152x10.5?
If so how?
My system
Msi KT3 Ultra 6380E
Xp1600+
512 Corsair cas 2 PC 2700
Running Win XP Pro
Can some please post there settings ect if they have managed to get it above 151.
I have tried but it crashes and locks me out, I have to clear the cmos to get it to boot up.
Thanks
grandad

Im having the exact same problems...bios wont post past 150fsb..i have the xp1600+ as well locked.
BUT.......after i get into windows, i can set the FSB up to 160....figure that one out :]
Quote
Originally posted by grandad
Hi, Well i tried setting it to 166x10 no go locked me out again, I then tried it at 155x10 same thing. tried setting the bios to default settings then changing it, same thing.
This is very frustrating, why is it others can but i for some reason cant and yet i can get it to 150x10.5 Although its a bit unstable
Also can someone please let me know the optimal seeings for the bios and doi need to enable IDE bus master as its disabled.
Any help would be greatly appreciated
Thanks
grandad

Similar Messages

Whats the highest can i oc my processor at stock cooling

you can see my specs below
i want to oc it cause i just bought some pc3200 samsung ram
i have the stock Cool Master fan on it with the aluminum block thing
and i have a fan pullin in air from the front and one pushin air out the back so theres a constant flow of air thru the case
so whats the highest i can oc it at stock cooling?

lol, ok well i think the thoroughbred 2600 is pre week 39, the cpus made after week 39 are locked for good, try putting a conductive wire in these 2 sockets:
http://3dgameman.com/forums/attachment.php?s=&postid=92848
then try lowering the multi in your bios settings to 11, then slowly(5mhz) raise the fsb and then benchmark or stress test it, also refer to the stickies at the top

HT1444 I have desktop dual 2.3 ghz PowerPC G5,2GB DDR2 SDRAM, running Mac OS X 10.4.11. What the highest or latest OS that this model can run? Thank you very much

I have desktop dual 2.3 ghz PowerPC G5,2GB DDR2 SDRAM, running Mac OS X 10.4.11. What the highest or latest OS that this model can run? Thank you very much

Leopard requirements/10.5.x...
    * Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
minimum system requirements
    * 512MB of memory (I say 1.5GB for PPC at least, 2-3GB minimum for IntelMacs)
    * DVD drive for installation
    * 9GB of available disk space (I say 30GB at least)
Classic/OS9 Apps no longer supported.
Trouble is Apple no longer sells it, check eBay & such for the Retail version, not the Gray Discs...
http://www.ebay.com/sch/i.html?_nkw=mac+os+x+leopard+retail+10.5

What the Initial value for sy-tabix & sy-index

Hi Folks
I have a small doubt.
What the Initial value for sy-tabix & sy-index?
Can anyone please clarify me?
Regards,
Sree

hi sree,
both values are initialized to 0 before processing and after processing values are changed according to used scenarios.
if helpful reward some points.
with regards,
suresh babu aluri.

HT5625 Upgraded iphone 4 to 5s. Want to use 4 as ipod. DO NOT KNOW APPLE ID FOR 4. When I try to find Apple ID, it finds the id on my ipad and my 5s. I have no idea what the old id is? What are my options?

Help

TheresaDances wrote:
It isn't the same. I can use all the options on the apple site and it finds my new id.
New ID?
Is there some reason you created a new AppleID?
Why don't you simply continue to use the same AppleID you had?
The 4 ID IS something I made up in the store the day I bought the phone. I have no idea what the id is.
You had an iPhone for 2 years and you never got anything from iTunes or never enabled any features of the iPhone?

When i try to update my apps from the app store some of the apps wont update and ask for an Apple ID that isn't mine. Whats the problem and how do i fix it?

When i try to update my apps from the app store some of the apps wont update and ask for an Apple ID that isn't mine. Whats the problem and how do i fix it? All im trying to do is update my apps and its asking for these random apple ID's.

The apps were purchased by another user with a different Apple ID. You will have to erase them and repurchase them using your Apple ID.

I am trying to figure out what the wifi password is for the printer

When i open up my settings on my galaxy s5 and scan for the wifi connections the printer shows up but its asking for a password. How do i find out what the password is. Can you please help me out i would appreciate it. Thanks also it's an android phone as i mentioned earlier (Samsung galaxy s5)

If you are printing to your home network, this is likely the wireless password to your network - the password you use to access your router, for example. How to find your wireless network password Additional Help:Add Device to Printer See Section titled > Mobile Device / iPad gets an App >>News for Android, Samsung Galaxy Note, HP Slate SeriesWhen you see a Post that helps you,Inspires you, provides fresh insight,Or teaches you something new,Click the "Thumbs Up" on that Post. Click my Answer Accept as Solution to help others find Answers.

I am trying to set up a co-worker's email on her iPhone and I don't know what her password for Thunderbird is and neither does she. Can I get the password?

I am trying to set up a co-worker's email on her iPhone and I don't know what her password for Thunderbird is and neither does she. Can I get the password somehow, or what do you recommend?

There is no password to Thunderbird. The password you need is to the email account. Contact the email provider for password reset.

Firefox crashing when i wanna open or close a tab or a window, also while wanna open any page, now what to do for solving the problem?

Firefox crashing when i wanna open or close a tab or a window, also while wanna open any page, now what to do for solving the problem?

Disable McAfee siteadvisor and check the problem still persist or not?

Whats the maximum resolution resolution supported @ 60 Hz on an external display for mid 2014 macbook pro retina 13 inch ?

whats the maximum resolution supported @ 60 Hz on an external display for mid 2014 macbook pro retina 13 inch ?

I don't know where you found 1920x1080, but that isn't the max. The INTERNAL display can even support more than that.
The maximum resolution is really hardware based, and since Thunderbolt 2 has a Mini displayport connector (Mini Displayport 1.2), the max resolution for Mini Displayport is 4k (3840x2160).
PLEASE NOTE: Not all adapters can support that resolution, most monitors that can run 4k @60Hz have Displayport 1.2 (The most recent revision), Mini Displayport 1.2, and HDMI 2.0. DVI dual link can run 4k, but only 24-30Hz, depending on the monitor.
Hope this helps!!

I have a issue with my mac book pro. For some reason it won't stay powered on. I can't get past the apple loading logo. The battery is fully charged so it is not the problem. Can anyone tell me what the problem may be and how can i get it resolved?

I have a issue with my mac book pro. For some reason it won't stay powered on. I can't get past the apple loading logo. The battery is fully charged so it is not the problem. Can anyone tell me what the problem may be and how can i get it resolved?

The battery is fully charged so it is not the problem.
What happens when you use the MagSafe?

Whats the difference between these two queries ? - for tuning purpose

Whats the difference between these two queries ?
I have huge amount of data for each table. its takeing such a long time (>5-6hrs).
here whice one is fast / do we have any other option there apart from listed here....
QUERY 1:
SELECT --<< USING INDEX >>
      field1, field2, field3, sum( case when field4 in (1,2) then 1 when field4 in (3,4) then -1 else 0 end)
    FROM
      tab1 inner join tab2 on condition1 inner join tab3 on condition2 inner join tab4 on conditon3
    WHERE
     condition4..10 and
    GROUP BY
      field1, field2,field3
    HAVING
      sum( case when field4 in (1,2) then 1 when field4 in (3,4) then -1 else 0 end) <> 0;
QUERY 2:
   SELECT --<< USING INDEX >>
      field1, field2, field3, sum( decode(field4, 1, 1, 2, 1, 3, -1, 4, -1 ,0))
    FROM
      tab1, tab2, tab3, tab4
    WHERE
     condition1 and
     condition2 and
     condition3 and
     condition4..10
    GROUP BY
      field1, field2,field3
    HAVING
      sum( decode(field4, 1, 1, 2, 1, 3, -1, 4, -1 ,0)) <> 0;
[pre]

My feeling here is that simply changing join syntax and case vs decode issues is not going to give any significant improvement in performance, and as Tubby points out, there is not a lot to go on. I think you are going to have to investigate things along the line of parallel query and index vs full table scans as well any number of performance tuning methods before you will see any significant gains. I would start with the Performance Manual as a start and then follow that up with the hard yards of query plans and stats.
Alternatively, you could just set the gofast parameter to TRUE and everything will be all right.
Andre

I run a mac air on a single user account but multiple people using it, which is ok for the situation. All have their accounts in the apple mail app. what is missing for me is a separate password to access the mail account. otherwise anyone can see anyones

I run a mac air on a single user account but multiple people using it, which is ok for the situation. All have their accounts in the apple mail app. what is missing for me is a separate password to access the mail account. otherwise anyone can see anyones
Any clue, how i can add a mail account to apple mail app, but with separate password / pin to open it.
Years ago there was a program called mail switcher which added this functionality, but thats gone.
cheers
Tom

They would have to be logged in as separate users in order not to see your account in Mail. Whatever accounts put in Mail under your account will show up. All mail accounts usually have there own user and password. The only thing you can do is to remove the password from Keychain and take the account offline so you don't keep getting prompts for passwords each time it checks for mail.
Not a great solution.
Best way is to give the other user their own user account with their own mail and enable fast user swithcing to log between the different users if all access the computer frequently.

HT2731 How do I remove an email address that is no longer vaild for the iTunes Store? A really old email address keeps popping up on my iPhone, the email address is not valid and I have no idea what the password was. It's been over two years.

How do I remove an email address that is no longer vaild for the iTunes Store or my iPhone? A really old email address keeps popping up on my iPhone, the email address is not valid and I have no idea what the password was. It's been over two years.

Hello tcnolen1,
It sounds like you are trying to change the Apple ID logged into the iTunes & App Stores on your iPhone. Use these steps:
Changing your Apple ID account
Tap Settings > iTunes & App Stores, then tap the Apple ID signed in.
Sign out of the current Apple ID account and then sign in with another account or create a new Apple ID.
You can find the full article here:
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/ht1311
Thank you for using Apple Support Communities.
Best,
Sheila M.

What is new for the Lumia 620 in the black update

What is new for the Lumia 620 in the black update ?

It seems Lumia 620 doesn't benefit the "double tap to wake", other than that all announced apps and features will be available. I advise to check also some great beta apps from Nokia Beta Labs, kudos to the guys developing these.

Whats the highest for the FSB kt3 6380E

Similar Messages

Maybe you are looking for