Whats the min seats do you have to buy for a educational insitution?

I am trying to get my school to buy final cut pro for our A Level and BTEC students but I am unable to find any information on how many seat you have to buy as a min. OR even anything to do with buying final cut for schools. If anyone can point me in the right direction I would be very grateful. We are looking for about max 6 - 10 seats all together.
Thank you

Information here:
http://www.apple.com/education/it/vpp/
MtD

Similar Messages

  • Hi I am a lecturer at a university in the UK. Do you have experience of Ipads in education? Or grants and funding?

    Hi I am a lecturer at a university in the UK.
    I am preparing a proposal to the Vice Chancellor about incorporating Ipads into the learning process.
    I am thinking it would be a tangible gift as part of their fees.
    Does anyone have experience of Ipads in education, what are your view? I have seen Apples articles but want an un corportae viewpoint.
    Does anyone know of any funding routes?
    Do Apple have grants available or specific support for institutions?
    Thanks in anticipation of your constructive help.
    Karl

    Apple has no grants or funding I've ever heard of other than the standard discounts for purchasing multiple units. I'm sure you're probably far more aware of other funding resources available to UK institutions that I would be.
    As to non-corporate opinions and resources, if you seach the web for "ipads in education" and "ipads in the classroom", you'll find a plethora of sites with information that should be of help. The "iPads in Education" ning is probably a good place to start:
    http://ipadeducators.ning.com/
    Regards.

  • I have been experiencing excessively slow upload speeds.  like, what the malfunction.  does someone have an explanation for such?

    when uploading a movie either to theater or to share, i have been experiencing excessively slow upload speeds, as well as varying upload time. 
    -excessively slow speeds, such as a 1-minute video requiring more than 1-hour 44-minutes to upload.
    -varying upload speeds, as in the status circle will report an upload time of 1-hour, and moments later report an upload time of 4-hours.
    also, when selecting "iMovie" as an application, it requires an excessive amount of time simply to load and appear on the monitor.

    Hi Julio,
    We have removed the class-map for IPS and have done a clear local-host.
    We have also changed the duplex (from Auto to full) and speed (from Auto to 100Mbps) on the outside interface.
    it seemed the duplex we 've got was half when it was configured as Auto. We've asked our ISP to change in their side to full, but we've got half instead.
    We did an upload test after those actions, the speed we got is 300KBps, it should be 8Mbps (download and upload).
    when we send many upload at a same time, we can see from our monitoring tool that the bandwidth used is 8Mb.
    We wonder we cannot get high speed when uploading a single file, the max speed is 300KBps.
    Please, find below the output of
    sh int | inc error
            0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
            0 output errors, 0 collisions, 1 interface resets
            0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
            0 output errors, 0 collisions, 1 interface resets
            0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
            0 output errors, 0 collisions, 1 interface resets
            0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
            0 output errors, 2710 collisions, 3 interface resets
            0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
            0 output errors, 0 collisions, 0 interface resets
    the 2710 collisions is on the outside interface (i think it was before changing duplex)
    sh cpu
    CPU utilization for 5 seconds = 2%; 1 minute: 1%; 5 minutes: 1%
    when we plug a computer directly to the ISP device (IDU), the speed is high (about 650KBps).
    what would you suggest us to do? (sure, we will rate all the helpful posts )

  • You have no authorization for the requested data. Message no. UPC217

    Hi All,
    When i execute a BPS planning function i am getting the following error.
    'You have no authorization for the requested data. Message no. UPC217'
    Plz let me know how to rectify the problem asap.
    Thank you all in advance
    Kiran

    Hello,
    Your Function/level makes use of an authorization relevant InfoObject without restriction (or at least no restrictions enough).
    Check that the Level is restricted correctly regarding the authorizations.
    regards,

  • You have no authorization for this transaction in plant: M7120

    Hi guys.
    I am getting the error message(M7120) "You have no authorization for this transaction in plant XXXX" when performing 101 movement for production order using MIGO.
    /nsu53 doesn't return any object. Why?

    Hello Arun,
    It is a standard message. SU53 should show the exact authorization object which has been blocked. Or you can also try to check this with T code ST01.
    Refer the below threads & seek help from your basis consultant to get this resolved.
    Authorisation missing
    authorization error in mbbs transaction | SCN
    Regards
    Mangesh S

  • Do you have to buy bootcamp?

    I thought there was a utility that came with Mac OSX Leopard so you could install Windows XP. But is it something you have to buy additionally?

    bootcamp assistant (it's in /Applications/Utilities) allows you to partition your startup drive so that you can install windows on the new partition. but you have to buy a copy of windows to have something to install. that's a microsoft product and apple doesn't sell it. the leopard install disk also provide necessary drivers that need to be installed after windows has been installed.
    Message was edited by: V.K.

  • HT1338 When I try to download the iMovie Update :  "You have updates available for other accounts.  To update this application, sign in to the account you used to purchase it." shows -don't know what other accounts it is talking about? I Only have 1 Apple

    When I try to download the iMovie Update :
    "You have updates available for other accounts.
    To update this application, sign in to the account you used to purchase it." shows -but I don't know what other accounts it is talking about? I Only have 1 Apple Id !

    Maybe this will help. If you monitor the "More Like This" box, other solved threads appear. Opening them usually displays other threads.
    http://support.apple.com/kb/TS4236

  • How do you know what version of OS X you have on your Mac Mini?

    How do you know what version of OS X you have on your Mac Mini?

    Apple Menu (upper left on meu bar) > About This Mac
    "Verion: " 10.8.x is Mountain Lion, 10.7.x is Lion, 10.9.x is Mavericks, 10.6 x is Snow Leopard.

  • Hi, I'm need connect the thunderbolt display to my MacPro , but the connection is mini display, you have any adapter for that?

    hi, I'm need connect the thunderbolt display to my MacPro , but the connection is mini display, you have any adapter for that?

    unfortunately, will not work ever
    your mac needs tb on it to use a tb display; the older mac pro's use the apple led cinema display

  • The battery for my Macbook Pro 13 "has only 121 cycles and is not charging anymore, my Mac is telling me that it is necessary to exchange it. You have any tips for me to find out what might be happening with my battery?

    The battery for my Macbook Pro 13 "has only 121 cycles and is not charging anymore, my Mac is telling me that it is necessary to exchange it. You have any tips for me to find out what might be happening with my battery?

    Guys, i am actually trying using a solution provided by the article shared by dominic23,
    It says "Another option is to get an ionizer to help the atmosphere in the workplace be more conductive and pull charges away from contact surfaces, including yourself."
    So in my home, we have such device that could clean the air using ion, and i am using it in my room...
    Result: BANG!!! The electric shock on my macbook has gone!! I don't really care about physics but somehow it works! You guys should give it a try.
    Thanks again dominic23

  • What happens to the cube performance when you have too many UDAs?

    Hi,
    what's the impact on the cube performance if you have too many UDAs associated with the same level of members? Let's say 15 UDAs for each member
    If attribute is not an option, what's another way to help alleviate the data load?

    Hi,
    Adding UDAs to the outline doesn't impact the size of Essbase database.
    I've seen cubes with over 70 UDAs. And I think UDAs is the best choice to set load rules.
    But for considering of the implication of Dynamic calculations as reporting on UDAs can be slow. Define UDAs on sparse dimensions only.

  • What are the top 5 apps you have to download once you get the ipad

    what are the top 5 apps you have to download once you get the ipad

    Air video
    Splashtop
    Netflix
    Hulu+
    AvplayerHD
    If you want more....
    Skyfire
    Kindle
    iBooks
    Dropbox
    Dragon Dictation
    TextNow
    Friendly+
    Remote
    These are the ones I use the most.  Barely touch my laptop now.  Use it mostly as a media server on my network.  If I need something on it I just use Splashtop and remote into it. 

  • I am trying to reload I-tunes and i get the message "Verify that you have sufficient privelages to start system services. What is the problem?

    I am trying to re-load i-tunes and i get the message "verify that you have sufficient privelages to start system services" I am trying to find the problem so i can fix it. Thanks

    You have to right click and "Run as administrator". Also refer to this page for more info on a successful reinstall of the new version: Troubleshooting issues with iTunes for Windows updates

  • Unable to open document. Please check to see if you have read permission for the above file.

    System:
    Adobe Acrobat X Pro, 10.1.2
    Windows 7 Enterprise, 32-bit
    Quad Core badass CPU
    4GB RAM
    MS Word 2010 (Office 2010)
    I installed the latest version as Administrator and am running as Administrator. I have all rights to all files on the PC.
    When I attempt to create a PDF from any Word document, whether .DOC or .DOCX, I get an error window every time:
    "Unable to open document:"
    "[document location]"
    "Please check to see if you have read permission for the above file."
    This happens after the little notice pops up "Starting the application which created the document...."
    If I open Word and create PDF from the ribbon, it works. It still won't allow me to create from Acrobat.
    It creates PDFs from Excel files but not DOC files. I've searched for solutions but found none. I did find this from July of 2011:
    "I have found out from Adobe technical support that this is a known issue with Office 2010 SP1 installed. This is an FYI for anyone else experiencing this issue, remove SP1 and it will work ok. They said an update to correct this issue will be coming within the next quarter."
    I have updated to the latest version 10.1.2 and still have this problem.
    This is a major issue, because it also fails on batch conversions, which is what I really need for the 100 or so documents that need to be PDFed. I'm not going to open each individual file and save each one from within Word.
    This is a KNOWN ISSUE at Adobe, and if you look through the forums you'll find many people having this problem, and so far, I have not seen any solution.
    If anyone has found the solution, please post it here.
    Thanks!
    B

    I think I found a solution. It seems to be relatet to normal.dotm.
    In our environment we have upgraded from XP & Office 2003 to Win7 and Office 2010. Normal.dot is stored on the users home share. When Office 2010 is started for the first time (for a user) it takes some of the old stuff from normal.dot and puts it in the new normal.dotm. When this happens, we get this error in Acrobat X.
    The solution is to rename both normal.dot and notmal.dot to e.g. normal.dot.old and normal.dotm.old. Office/Word 2010 will then create a new, "clean" normal.dotm.
    (By the way, if you are in a corporate environment, you might have changed the default path to normal.dot in Office group policies. You can see it here: HKEY_CURRENT_USER\Software\Policies\Microsoft\office\14.0\common\general\usertemplates)
    I would be interested in knowing exactly why/what in normal.dotm caused this error. I can provide you (Adobe) with a faulty normal.dot(m), if you're interested.

  • You have insufficient privileges for the current operation-Getting error running OAF page in R12

    I have a custom OAF page in R11 which is working fine.
    Same page is giving below errors in R12.
    Any suggestions how to resolve this issue..please advice.
    [167]:STATEMENT:[fnd.framework.webui.OAPageSecurity]:MAC validation status = false   
    [167]:STATEMENT:[fnd.framework.webui.OAPageSecurity]:Request parameters validation status = false   
    [167]:ERROR:[fnd.framework.webui.OAPageSecurity]:You cannot run a page which is not SelfSecured when the MAC fails.   
    [169]:ERROR:[fnd.common.Message.auto_log]:FNDFND_INSUFF_PRIVILEGES   
    [169]:ERROR:[fnd.framework.OAException]:You have insufficient privileges for the current operation. Please contact your System Administrator.   
    [170]:EVENT:[fnd.framework.webui.OAPageContextImpl]:OAF LOG: Event : Redirect Page, in: oracle.apps.fnd.framework.webui.OAPageContextImpl: OA.jsp?akRegionCode=FNDDIALOGPAGE&akRegionApplicationId=0&transactionid=817211813&oapc=10&oas=YyMjRI6buFwrYehD8b25iQ..&retainAM=Y&addBreadCrumb=S&OAMC=G   
    [170]:PROCEDURE:[fnd.profiles.Profiles]:getProfileOptionValue:  name=JTF_PF_MASTER_ENABLED; levelID=10001; levelValue=0; levelValueApplID=0   
    [170]:EVENT:[jtf.activity.CorePageObject]: PATBE START currentPageObject : PAT STATUS:false   
    [170]:EVENT:[jtf.activity.CorePageObject]: PATBE END currentPageObject : return factory.dummyProxyUser():   
    [322]:EXCEPTION:[fnd.framework.webui.OAPageBean]:java.lang.NullPointerException   
    Thanks in Advance
    Sridevi K

    Hi Sridevi,
    The custom page is a selfsecured page?
    ie, it will be accessed without login?
    What is the profile option fnd_debuging_level 's value set to.
    I Could see one your other thread
    Re: You have insufficient privileges for the current Operation error
    you mentioned that you did tried setting the profile options
    Framework Validation Level
    FND Function Validation LEvel
    FND Validation Level
    to none, still you are facing the issue,
    At what level you tried the profile options.
    Thanks,
    With regards,
    Kali.
    OSSi.    

Maybe you are looking for