Whats the range of apple airport express

whats the range of apple airport express.

The effective range is about 150 feet or approximately 50 meters when there are no obstructions in the signal path between the AirPort Express and the wireless device receiving the signal.
But, walls, ceilings and other obstructions absorb a great deal of the signal in a home, so it is not possible to predict how the AirPort Express might perform in your home until you try it out in your home.
In general, you would not want the signal to have to negotiate moving through more than a few walls. A ceiling, because it is much thicker than a wall, will absorb a good deal more of the signal.

Similar Messages

  • What is the range of an Airport Express 2nd generation? The range is better than the 1st generation?

    What is the range of an Airport Express 2nd generation? The range is better than the 1st generation?

    150 feet in clear space with no obstructions in the signal path.  It is not possible to predict range with any obstructions in the signal path.

  • What is the range for an Airport Express?

    What is the range (physical distance) for an Airport Express?
    What is the range (physical distance) for an Airport Extreme?

    The range of the AirPort Express is about 150 feet or 50 meters. But, this measurement is taken in free air, with no obstructions like walls or ceilings in the signal path, and no other networks in operation that might interfere with the wireless signal.
    In the real world, in a real home, once the signal passes through 3-4 walls, it is about gone. A ceiling will absorb more of the signal than a wall, because it is thicker. So, as much as possible, you want wireless devices to have line-of-sight with the wireless router for best performance.
    Bottom line....it is not possible to predict wireless performance in advance of any installation since there are so many variables involved.

  • Is it possible to extend the range of one airport express with a second airport express?

    Hi,
    We have a Time Warner router and have it hardwired to an Airport Express. Is it possible to extend the range of that one airport express with a second airport express?

    ... The new AirPort Express that I have is an 802.11n version, but the second one is an older model and I don't know which version it might be. Also, the system recently updated so I'm using the AirPort Utility 6.1.
    If you are using Mountain Lion, AirPort Utility 6.1 is the version installed by default. It will not be able to administer "older" AirPort base stations.
    For them, use AirPort Utility 5.6 which contains the features you need. It can administer your older Express as well as current production base stations.
    AU 5.6 is compatible with Lion as well as Mountain Lion, however, the installer app will refuse to install it on Mountain Lion.
    This dilemma is easily solved though. You simply need to extract the app from the installer package using a package extractor like Pacifist.
    Download Pacifist here: http://www.charlessoft.com/
    Download AirPort Utility 5.6 here: http://support.apple.com/kb/DL1482
    If you happen to have an archived copy of the AU 5.6 app somewhere, such as a Time Machine backup or equivalent, you can simply restore it or drag the app to your Mountain Lion system's Utilities folder. It will run without complaint. It is only the package installer that is the problem.
    Mountain Lion will not allow you to delete its existing version of AirPort Utility. Just ignore it. It and the older version (which will bear the unique name "AirPort Utility 5.6") can peacefully coexist.
    Note: For those with Leopard or Snow Leopard systems you need AirPort Utility 5.6.1 (this is confusing - a later AirPort Utility version for an earlier OS X version - but it is correct).
    Download AirPort Utility 5.6.1 here: http://support.apple.com/kb/DL1536

  • I have FIOS. I linked my FIOS router via ethernet cable to an Airport Extreme.  I want to extend the range using an Airport Express wirelessly; however when I plug in the Express, the network does not find it.

    Any help is appreciated.

    Make sure the ethernet cord is plugged into the WAN port on the Aiport (the port with a circle of dots above it) and do a hard reset (hold the reset button until the light blinks rapidly.)  It will not automatically appear in the Airport Utiltiy. You are looking for the airport under the wifi menu after a few minutes or in Settings>Wifi on an iOS device that you can click to join and continue to setup.

  • I'm trying to extend the range of an Airport Extreme 802.11g by adding an Airport Express 802.11n. I set the Express up to join the existing network, but it does not make any difference in the range of the network. What's wrong?

    I'm trying to extend the range of an Airport Extreme 802.11g by adding an Airport Express 802.11n. I set the Express up to join the existing network, but it does not make any difference in the range of the network. What's wrong?

    Let me see if I can help you with the basic WDS configuration steps:
    Note: To help facilitate the setup, temporarily connect the AXn directly to the AEBS LAN port using an Ethernet cable. Once the setup is complete, you can move the AXn to the desired location. For all configuration steps you will be using the AirPort Utility. Before starting, be sure to jot down the AppleIDs for both base stations.
    802.11g AirPort Extreme Base Station (AEBS) Configuration
    AirPort Utility > Select the AEBS > Manual Setup > Wireless tab
    Wireless Mode: Participate in a WDS network
    Manual Setup > WDS tab
    WDS Mode: WDS main
    Allow wireless clients (checked)
    WDS Remotes: <enter the AppleID for the AXn here>
    Click on Update and allow the base station to restart.
    802.11n AirPort Express Base Station (AXn) Configuration
    AirPort Utility > Select the AXn > Manual Setup > Wireless tab
    Wireless Mode: Participate in a WDS network (Note: You may have to hold down the Option (Mac) or Control (PC) key to see this option in the list.)
    Manual Setup > WDS tab
    WDS Mode: WDS remote
    Allow wireless clients (checked)
    WDS Main: <enter the AppleID for the AEBS here>
    Click on Update and allow the base station to restart.

  • Will the use of an Airport Express widen the range of my existing wifi?

    Will the use of an Airport Express widen the range of my existing wifi?

    Yes, but only if your existing WiFi is being produced by another Apple wireless router.
    The AirPort Express is almost certainly not compatible if you are planning to connect using wireless only with another brand of wireless router.

  • My Iphone will not accept the Apple airport express as the Wi fi network so I can facetime, how do I fix?

    My Iphone (I have a 4s and 3G) will not accept the apple airport express as the wi fi network so that I can face time. How do I resolve this?

    What are the exact specifications of the wireless network you've created? (If you're not sure, open Airport Utility on your computer and check the Radio Mode in the Wireless tab). Bear in mind:
    - iPhones earlier than the iPhone 4 cannot connect to an "n-only" network - they need b/g compatibility.
    - No iPhone can connect to a 5GHz network (Compatibility mode will also fix this).
    Matt

  • HT4262 where is the apple airport express ID located?

    just bought an apple airport express.  can anyone tell me where the airport ID can be found?

    Unfortunately, Apple no longer prints the Ethernet ID and AirPort IDs on the AirPort Express.
    You can locate the IDs by configuring the Express to connect to your network, and then use AirPort Utility to display the information that you need.
    You did not provide information on the type of operating system that you are using on your computer, so we cannot provide any more specific information about locating the IDs if you need more help.
    If yu are using a Mac, and do not know what version of the operating system you are using, you can find that information by clicking on the Apple icon in the upper left corner of the screen, then clicking About This Mac. The OS X Version Number will be displayed. Post back with that info.

  • So does the Apple Airport Express take the place of the "Charter" modem and router we already have in our house?

    We purchased the Apple Airport Express and in our home have 2 iPads, 2 iPhones, 1 iPod, 1 MacBook, and two *D* computers and a Brother printer along with Apple TV and a projector.
    1. How do we get them all to mirror the content of the various devices onto the TV or the projector?
    2. Can we now unplug the *Ch* equipment from our cable source and plug in the airport express?
    Putting all the pieces together is just a little beyond us at this moment. Maybe it will click with a little help. Thanks!
    "Stuck" in Montgomery

    I'm pretty sure you will find that the Airport Express will not work with your router unless it's an Airport Extreme Base Station.
    You can do two things with the Airport Express. You can connect it by USB or Ethernet cable to a device like a printer that does not have wireless capability and provide a wireless connection to your router provided the two devices will "talk" to each other.
    You can connect it to a Mac to provide audio streaming wirelessly.
    You may be able to use it with your projector provided it has its own wireless capability, but I don't know if an Airport Express will stream video. Same for your TV.
    In fact for your home I'm not sure the AEX would be of much use except to connect to your Mac in order to stream audio to another wireless device in your home. But only if you can get the AEX to work with your router or replace the router with an AEBS (which you could only do if your current router is a discrete device connected to your Charter cable modem.)

  • My Apple Airport Express is blinking Amber and I cannot find it with the utility

    My Apple Airport Express is blinking Amber and I cannot find it with the utility

    Hi, had the same problem -
    1) Connected AE to Time Capsule with Ethernet cable - Configured it  - All worked fine
    2) Removed Ethernet cable between AE og TC - All worked fine
    3) Unpluged my AE from the socket outlet (power off) and pluged it inn where its supposed to be (2m from my Time Capsule)
    4) Now Airport Utility do not find me AE (after all i reconfigured through the Etheret calbe) ????
    A) Seems that Airport Utility are not able to "see" any wireless AE, only configurable by Ethernet Cable.
    B) Seems that AE are not able to reconnect to configured network after a power loss.
    This is a little bit ****** - older airport utility had none of the problems (A and B)

  • HT1998 what is the latest update for Airport Express 802.11n with the Mac OSX10.6.8

    what is the latest update for Airport Express 802.11n with Mac OSX 10.6.8?

    You can find out as follows:
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click the AirPort Express
    Click Manual Setup
    Click directly on the word Version (3rd line)
    If there are any updates, you will be notified.
    If there are not any updates, you have already have the latest firmware.

  • How to extend the range of my Airport Extreme network by adding an Airport Express

    How to extend the range of my Airport Extreme network by adding an Airport Express?

    You have to make sure that the AirPort Express is in Factory Default Settings. If it is straight out of the box, it is ready to be configured.
    The instructions that I will provide are for using AirPort Utility 6.0, which you have.
    Locate the Express in the same room as the AirPort Extreme for the configuration. Power it up and allow a full minute for the Express to display a blinking amber light.
    Make sure that the wireless is turned on your Mac
    Open AirPort Utility 6.0 and look at the small rectangle in the upper left hand corner of the display. It should now read something like "Other AirPort Base Stations (1)"
    Click on the rectangle, and then click on the AirPort Express xxxxxx listing
    AirPort Utility will take a minute or two to analyze the settings on your network and then suggest that  the Express be configured to "Extend" your wireless network.
    Edit the Base Station name to your liking, then click Next in the lower right hand corner
    Allow a full minute or two let AirPort Utility do its work
    When you see Setup Complete, click Done at the lower right of the window.
    Now move the AirPort Express to a location that is approximately half way between the AirPort Extreme and the area that needs more wireless coverage.
    You should be in business.

  • Hi.   Does anyone know ifs it possible to play Spotify on the IPhone through both Airport Express and Apple TV?  Whenever I click either/or it just changes the speakers rather play through both?  Cheers

    Hi.
    Does anyone know ifs it possible to play Spotify on the IPhone through both Airport Express and Apple TV?
    Whenever I click either/or it just changes the speakers rather play through both?
    Cheers

    to transfer audio to an airport express the device needs to support airplay unless your samsung tv's manual clearly state it does support it then it don't
    appletv can't get audio input into it the optical connector is output only same with the hdmi port

  • How can I find my Mac Adress for the Ethernet Port from a Apple Airport Express Device ?

    How can I find my Mac Adress for the Ethernet Port from a Apple Airport Express Device ?

    You can only locate, lock or erase your device when it is logged into iCloud and 'Find My Phone' is enabled, additionally the device will need to be switched on and connected to a wifi or cellular network.
    Unfortunately, you cannot activate iCloud or 'Find My Phone' remotely.

Maybe you are looking for