Whats the speed of the 100GB Hdd Option upgrade

Hello
Im looking getting a second mini & passing my one onto a pest "family member". The apple site had the option of a 100G hdd. What would the speed of this drive be.

"If the system were being used for video (as an example) then rotational speed of the drive is barely relevent to system performance as long as the drive is capable of sustaining the necessary data stream (a 4200rpm drive can typically manage 30fps DV)."
Maybe in iMovie, but ask any FCP user, and they will say 7200 makes all the difference in the world. I have only a 700 MHz processor, and that has nothing to do with whether or not I can capture and output video. However, if my drive has a bump in it, all **** breaks loose. The only time I ever wish for a faster processor is when I start a render... and then I go to bed.
But try scrubbing video on a 4200 RPM drive. Then try a 5400, then a 7200, the a couple of 7200s in a RAID. Then three, then four, then five...
Rotation speed makes a HUGE difference in video. Most of my time is spent editing, scrubbing, audio scanning and doing things that really work the drives. Bay 3 at work feels a heck of a lot slower to me than Bay 1 or 2. Bay 3 has two 7200 RPM drives in a RAID, and Bays 1 and 2 each have a set of 5 drives in a RAID. Yet Bay 3 has the fastest processor in our building.

Similar Messages

Under "preferences" and the "security" tab, I don't know understand what the first 3 options mean. I checked all three and now my browsing is greatly hindered.

in preferences under the security tab, I do not understand what the first three options mean. I checked all three, and now my browsing is greatly hindered.
== I checked the first three options

Hello lea,
this is what those mean:
Warn me when sites try to install add-ons :
With [[Customizing Firefox with add-ons|Add-ons]] you can enhance Firefox's experience. However, some add-ons can be malicious so that's why Firefox warns you before installing them by default.
Block reported attack sites :
Attack sites are those sites that can install malware on your computer. Normally, Firefox blocks that. The same goes for
Block reported web forgeries , where Phishing sites are being blocked. See [[How the phishing and malware protection in Firefox works]].
Also, those information can be found in the [[Options window - Security panel]] KB article.

What the maximum hdd for iMac (2009-Early)

hi
What the maximum hdd can i put it for my iMac (2009-Early)
and can i put ssd??
my hdd now is
WD3200AAJS-40H3A0

The largest currently available for a notebook drive is 1.5 GBs. Yes, you can put in an SSD.

What the max HDD size my Motherboard can take?

I got these specs:
Motherboard: MSI MS-6342/K7M Pro (MS-6340M)/K7TM Pro (MS-6340)
Bios: http://img230.echo.cx/img230/2712/pixx9kl.jpg
I want to know if they can run on ATA 133, if they can get 16 mb Cache, and what is the max size max each HDD?
It it not mentioned on the mainsite :-/

Quote from: Fredrik Åsenius on 26-June-05, 06:47:00
Hello Erwin!
As it normally is the same BIOS for them, I think this might help:
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=131
"On-Board IDE
• An IDE controller on the VIA® VT82C686B Chipset provides IDE HDD / CD-ROM with PIO,
Bus Master and Ultra DMA 33/66/100 operation modes. "
http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=131&kind=1
BIOS, update version 4.4
"-Support HDD Size larger than 137GB"
Hmm, how can you see if you have succesfully updated to version 4.4? because I am not sure if I did it right
Also it supports HDD larger than 137gb, does it support up to a 300 gb?

Whats the best way to upgrade from 4.5.0131 to new sprint +s version 4.5.0175

Should I upgrade directly frm the BlackBerry curve 8330 browser or do it via desktop manager on PC ? Pls let me know asap. Thanks!!
---- Mary Ellen

Hi There!
"Best" is so subjective, don't you think? Rather, it's a set of trade-offs that result in your own personal preference. For instance, via DTM, you can (and should, IMO) take a full manual backup before you do any updates. Also via DTM, you can install your carriers device OS package which will keep DTM working well with your device and your carrier...but you might have to remove and install a new package when your carrier releases another update. OTA updates don't have the ability for the robust backup of DTM, but are more convenient for those who cannot tether easily. So, best becomes what works best in your unique world. For me, DTM only -- backup/restore is critical to me, so that trumps all. But that's just me.
Cheers!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Can someone tell me what the benefits are to upgrading from Adobe Creative Suite 6 to Creative Cloud.

I work alone, I am the only employee of 1500 employees who uses adobe software. Other than having a lot of people who use the same software and being able to bounce ideas off each other, what are the benefits?

CS6 is 3+ years old and is no longer being updated... Cloud is current, and IS being updated with new features
If you don't need new features, or the ability to edit new file types, keep using CS6

Does anybody know what the cost is to upgrade 5 weeks early for iphone 6

contract is up toward the end of October. Ordered iphone 6 for my daughters line which is eligible but now I dont want to wait for one for myself. Since delivery dates are now well into October would they let me order now.

Probably not. If you are not eligible till October, you can't pre-order it now anyway.Order it once you re eligible.

I think I chose the wrong Installation Option - Now what???

I installed Leopard right when it came out and love the new OS. But, at the time I did not know what the various installation options meant or implicated. So, I chose the first/default "Upgrade OSX" option.
Now, I have not been having any specific problems, but I think my computer should be faster when loading certain apps and toggling around between spaces, dashboard, and multitasking. The more I read about the installation options, I feel that my mac would run better if I reinstalled Leopard using another installation option, like Archive and Install.
Is this a true concern? Should I reinstall using another option to operate at full potential? How do I go about doing that... same as before? Any help or suggestions is appreciated.
Phil

Hi Phil Mutz;
So far I have used Upgrade to install Leopard on five Macs, two of my own and three for friends. So far all of them are all operating just as they were with Tiger. From my experiences with Leopard, I suspect that your problem is elsewhere on your system rather then how you installed Leopard.
Allan

The cpu interface option

Hi!
I have a MSI K7N2 Delta ILSR mainboard with a AMD Athlon XP 3200+ cpu installed. This cpu runs with 400Mhz fsb and the mainboard bios is the latest version (7.8). I also have 2x 256Mb TwinMos DDR running in dual channel mode with the timings 2.5-3-3-8. Nothing is overclocked and everything is working fine.
What I would like to know is what the "cpu interface" option in the bios really does. It can be set to "normal" or "high performance". When is set to high performance, testing with sisoft sandra 2005 shows an increase in the memory bandwidth and the results with 3dmark2003 are also higher. Is this some sort of overclock? If so, what does it change? Does it have long term consequences or can it damage anything?

These are the benchmark results:
Normal settings:
-system performance: auto
-cpu fsb clock: 200Mhz
-cpu interface: normal
-fsb/dram ratio: by spd
-current dram clock: 200Mhz
-memory timings: by spd
-t-ras: 8
-t-rcd: 3
-t-rp: 3
-cas latency: 2.5
results:
Sandra 2005:
Cache & memory benchmark:
Combined Index : 4273 MB/s
Speed Factor : 14.0
2kB Blocks : 18752 MB/s
4kB Blocks : 19737 MB/s
8kB Blocks : 20245 MB/s
16kB Blocks : 16395 MB/s
32kB Blocks : 13564 MB/s
64kB Blocks : 12682 MB/s
128kB Blocks : 8311 MB/s
256kB Blocks : 6853 MB/s
512kB Blocks : 6800 MB/s
1MB Blocks : 1459 MB/s
4MB Blocks : 1445 MB/s
16MB Blocks : 1450 MB/s
64MB Blocks : 1448 MB/s
256MB Blocks : 1442 MB/s
Memory bandwidth benchmark:
RAM Bandwidth Int Buff'd aEMMX/aSSE : 2801 MB/s
RAM Bandwidth Float Buff'd aEMMX/aSSE : 2624 MB/s
Int Buff'd aEMMX/aSSE (Integer STREAM) Results Breakdown
Assignment : 2803MB/s
Scaling : 2798MB/s
Addition : 2796MB/s
Triad : 2810MB/s
Data Item Size : 8 byte(s)
Buffering Used : Yes
Offset Displacement Used : Yes
Bandwidth Efficiency : 88% (estimated)
Float Buff'd aEMMX/aSSE (Float STREAM) Results Breakdown
Assignment : 2797MB/s
Scaling : 2630MB/s
Addition : 2555MB/s
Triad : 2516MB/s
Data Item Size : 8 byte(s)
Buffering Used : Yes
Offset Displacement Used : Yes
Bandwidth Efficiency : 82% (estimated)
Everest:
Reading: 2753
Write: 1099
3dmark03:
3DMark Score   7816 3DMarks
GT1 - Wings of Fury   191,9 FPS
GT2 - Battle of Proxycon   60,7 FPS
GT3 - Troll's Lair   50,1 FPS
GT4 - Mother Nature   46,8 FPS
CPU Score   701 CPUMarks
CPU Test 1   78,4 FPS
CPU Test 2   12,4 FPS
Fill Rate (Single-Texturing)   1637,9 MTexels/s
Fill Rate (Multi-Texturing)   3905,3 MTexels/s
Vertex Shader   22,2 FPS
Pixel Shader 2.0   125,2 FPS
Ragtroll   33,6 FPS
No sounds   42,0 FPS
24 sounds   37,6 FPS
60 sounds   35,4 FPS
High performance settings:
-system performance: high performance
-cpu fsb clock: 200Mhz
-cpu interface: high performance
-fsb/dram ratio: auto
-current dram clock: auto
-memory timings: high performance
-t-ras: 8
-t-rcd: 3
-t-rp: 3
-cas latency: 2.5
results:
Sandra 2005:
Cache & memory benchmark:
Combined Index : 4351 MB/s
Speed Factor : 13.5
2kB Blocks : 18641 MB/s
4kB Blocks : 19727 MB/s
8kB Blocks : 20255 MB/s
16kB Blocks : 16401 MB/s
32kB Blocks : 13568 MB/s
64kB Blocks : 12659 MB/s
128kB Blocks : 8326 MB/s
256kB Blocks : 6865 MB/s
512kB Blocks : 6819 MB/s
1MB Blocks : 1511 MB/s
4MB Blocks : 1500 MB/s
16MB Blocks : 1497 MB/s
64MB Blocks : 1497 MB/s
256MB Blocks : 1497 MB/s
Memory bandwidth benchmark:
RAM Bandwidth Int Buff'd aEMMX/aSSE : 3009 MB/s
RAM Bandwidth Float Buff'd aEMMX/aSSE : 2811 MB/s
Int Buff'd aEMMX/aSSE (Integer STREAM) Results Breakdown
Assignment : 3024MB/s
Scaling : 3023MB/s
Addition : 2989MB/s
Triad : 3002MB/s
Data Item Size : 8 byte(s)
Buffering Used : Yes
Offset Displacement Used : Yes
Bandwidth Efficiency : 94% (estimated)
Float Buff'd aEMMX/aSSE (Float STREAM) Results Breakdown
Assignment : 3023MB/s
Scaling : 2834MB/s
Addition : 2710MB/s
Triad : 2677MB/s
Data Item Size : 8 byte(s)
Buffering Used : Yes
Offset Displacement Used : Yes
Bandwidth Efficiency : 88% (estimated)
Everest:
Reading: 3033
Writing: 1150
3dmark03
3DMark Score   7877 3DMarks
GT1 - Wings of Fury   195,7 FPS
GT2 - Battle of Proxycon   60,8 FPS
GT3 - Troll's Lair   50,3 FPS
GT4 - Mother Nature   47,4 FPS
CPU Score   718 CPUMarks
CPU Test 1   80,5 FPS
CPU Test 2   12,7 FPS
Fill Rate (Single-Texturing)   1637,5 MTexels/s
Fill Rate (Multi-Texturing)   3905,3 MTexels/s
Vertex Shader   22,2 FPS
Pixel Shader 2.0   125,2 FPS
Ragtroll   33,8 FPS
No sounds   43,8 FPS
24 sounds   39,9 FPS
60 sounds   37,0 FPS
As you can see, the computer is faster with this option set to high performance... But I just can't figure out what it changes. All the timings seem to remain the same...

Whats the recognisable limit - RAM

Hi,
I have a 2010 Mac Mini, what the most i can upgrade the hard drive and RAM to?
Jake

The Mac Mini 3,1 or 4,1 can take up to 8GB ($72 from OWC)
http://eshop.macsales.com/shop/memory/Apple_Mac_mini/DDR3

Mac OS no longer available after trying to remove Windows on Bootcamp. How can I restore Mac OS without the Mac HDD in options?

Mac OS no longer available after trying to remove Windows on Bootcamp. How can I restore Mac OS without the Mac HDD in options?
So what I did was, I had bought my iMac from a shop and asked them to do bootcamp for me. However, they installed 32 bit instead of 64. My fault, I did not make my self clear about it. So after it has been delivered to my house, I realized that I wanted the 64 bit. I tried to remove windows on bootcamp but honestly, I have not experienced this before. So I failed. I believe, I did something wrong.
So I opened the iMac and it keeps asking me to go to windows. Windows OS also corrupted.
I tried the Option Key but the only option is Windows 7 only. So using a different keyboard, I press option and it only shows Windows HDD and the Mac HDD has gone.
What am I going to do? How can I restore Mac OS without the HDD anymore?

iMac, Mac OS X (10.7.2) < your profile
Try using Lion Recovery

Can anyone explain what the other section section in the HDD usage description is for ? I recently used iphoto to send a mail and this "other "section inrease the usage by about 1GB....any ideas why ?

Can anyone explain what the "other" (yellow colour) section in the HDD usage description is for and what it does.It is under the about this mac section and storage option?
I recently used iphoto to send mail with photos attached and this "other" section increased by about 1GB. The mail size was around 900KB.....any ideas ?

Shurig wrote:
Thanks gor replying,,,this is my first time on this site.
Any idea why the "other" continues to increase. I have just got got my mac so no new apps installed yet only been using it for mail and web browsing. I tried the iphoto mail last night and noticed the the "other" section had increased by 1GB which I thought was rather larger. Do you know what this setion actually does ?
Also do you know if it is possible to delete the iphoto emails.
All of your 'stuff' that is not Music Movies Apps Backups or Photos is in Other, that means all your emails, all your files etc, why don't you just leave well enough alone, this is not windows and doesn't need tinkering with,

Sometimes my computer takes too long to connect to new website. I am running a pretty powerful work program at same time, what is the best solution? Upgrading speed from cable network, is it a hard drive issue? do I need to "clean out" the computer?

Many times my computer takes too long to connect to new website. I have wireless internet (time capsule) and I am running a pretty powerful real time financial work program at same time, what is the best solution? Upgrading speed from cable network? is it a hard drive issue? do I only need to "clean out" the computer? Or all of the above...not to computer saavy. It is a Macbook Pro osx 10.6.8 (late 2010).

Almost certainly none of the above! Try each of the following in this order:
Select 'Reset Safari' from the Safari menu.
Close down Safari; move <home>/Library/Caches/com.apple.Safari/Cache.db to the trash; restart Safari.
Change the DNS servers in your network settings to use the OpenDNS servers: 208.67.222.222 and 208.67.220.220
Turn off DNS pre-fetching by entering the following command in Terminal and restarting Safari:
defaults write com.apple.safari WebKitDNSPrefetchingEnabled -boolean false

HT5625 Upgraded iphone 4 to 5s. Want to use 4 as ipod. DO NOT KNOW APPLE ID FOR 4. When I try to find Apple ID, it finds the id on my ipad and my 5s. I have no idea what the old id is? What are my options?

Help

TheresaDances wrote:
It isn't the same. I can use all the options on the apple site and it finds my new id.
New ID?
Is there some reason you created a new AppleID?
Why don't you simply continue to use the same AppleID you had?
The 4 ID IS something I made up in the store the day I bought the phone. I have no idea what the id is.
You had an iPhone for 2 years and you never got anything from iTunes or never enabled any features of the iPhone?

JPEG/PSD issue--I open a jpeg and edit it (levels, crop) and then "save as" and the save as option shows there are now levels in the image and it wants to save it as a .psd file or a copy with layers. What am I doing that has these settings appear?

JPEG/PSD issue--I open a jpeg and edit it (levels, crop) and then "save as" and the save as option shows there are now levels in the image and it wants to save it as a .psd file or a copy with layers. What am I doing that has these settings appear?

16bit? Pixels extending beyond the canvas? (from a crop with delete unused pixels turn off). Have you previously been saving PSD files?
IME you sometimes have to tell Photoshop that the first save of a session is JPG, and it remembers from there on. The way to 'tell' Photoshop that JPG, or PDF, or PNG etc are now your preferred format is to Ctrl (Cmd) click on that format in the Save As drop down list. So long as the file does not have parameters that your chosen format does not support, then this should work for you.
[EDIT] Just noticed that you did include 'Crop' in the subject line. Do you have 'Delete cropped pixels' checked?

Whats the speed of the 100GB Hdd Option upgrade

Similar Messages

Maybe you are looking for