Whats with the Nightly 8, worked Sunday, now just Force Closes on my Droid X GB rooted??
I was loving and updating everyday on the Nightly 8.0 build than Monday morning, downloaded the update, and app just keeps Force closing, took it off and reloaded first dowload before any updates and it works fine! but as soon as I install mondays update it force closes! My phone is a Droid X with Gingerbread upgrade and is rooted! but I have made NO changes or added any new software to phone....Any ideas?
Could be a Bug in the 8.0 nightly. That's one of the risks that come with using pre-release versions which are still being developed. Have you tried any of the more recent versions? Like yesterday's or Wednesday's version?
Similar Messages
-
updated ipad mini last night with the ios 7.6 and now am unable to restart the pad, we have tried charging it completely and have had no luck in restarting it
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without be charged again. Also, if you have IOS-7, read this. -
I tried to update my iPhone 5 this morning with the new software update. Now my phone won't turn on. When I plug into iTunes, it says that my phone is in recovery mode and that it needs to be restored to factory settings. Is there a way to fix this without losing my settings? Why would this happen on a software update?
Zach Doody wrote:
itunes says i cannot update the phone as it is in recovery mode.
That is not what it says. Read the message again. It's telling you it has detected an iPhone in recovery mode and it must be restored.
Restore it. You don't have a choice at this point. -
I downloaded CS6 Red Plug-In and added to Package Contents, replaced the current files with the new without backing up, now my RED footage thumbnails and color-correction don't WORK! How do I get my old importerRed file back!!?? HELP!
Try asking in the Premiere Pro forum seems to be an Adobe Lab for Premiere Pro
-
mistakenly opened all the folders in my library of music and the Finder stopped working.
Now every time I restart the mac, all folders are reopened and can not work with the finder and tried killall-KILL Finder and nothing will reappearmistakenly opened all the folders in my library of music and the Finder stopped working.
Now every time I restart the mac, all folders are reopened and can not work with the finder and tried killall-KILL Finder and nothing will reappear -
Will E&M work with the "Night Ring" interface on a Bogen?
The Bogen documentation states "The NIGHT RINGER feature can be activated from 90V ring signal or contact closure." Does an E&M interface support contact closure? And, has anyone implemented this solution successfully specifically with the Night Ringer feature? Many thanks in advanced!
-johnWere you ever able to get this to work. I am trying to get an ATA to use the night ring with Bogen and it works internally but not when you call in from the outside. I tried a viking device that supposedly increases the voltage but with no luck??
-
yesterdsay i downloaded ios6 on my iphone 3Gs & the iphone stoped working it's just appears the apple & disappers the apple it was all the night like this what can i do?is it installing the ios 6 or what's the problem???
Thank You, thank You ...so much......that feature made me crazy!
Ocean20 wrote:
This can be turned off in settings/accessibility/zoom. Then on the next screen turn off -
I tried to update my iPad 2 with the iOS 6.0. Now I am stuck in restore mode. I get "unknown" errors 3014 and sometimes -1. Any ideas?
Try a hard reset: hold the power and home buttons simultaneously until the Apple logo appears.
-
I have an iPhone 4 on IOS5. I signed up for itunes match. After everything uploaded to the cloud, my songs are messed up. I'll select a song and the title will show with the right art work but a different song will start playing. Some songs won't play at all even though they do appear in the itunes store. The artwork almost always shows u blank until you turn it to landscape then it will appear. Anyone know what's going on?
I have found that scrolling through the album list (past albums without art) triggers the progress wheel next to the wifi symbol. You can scroll quickly through the whole collection and then wait! Artwork will appear gradually...
However, repeat visits to the Music App might initially show no artwork again, but it might spontaneously appear more quickly this time. The bad news is that the whole Music App is now sluggish as ****... -
Hello, I use MAC AIR OSX 10.6.8 and have Adobe CS2, that I was using 2 years ago on my older computer. I stopped using it because it would close down in the middle of work. Now I would like to reinstall it on the MacAir but I can not get it working. It tells Adobe doesnT support my System. But I can not update my old version or activate it. What can I do?
The mac you want to install photoshop cs2 on is running mac os x 10.6.8 Snow Leopard?
(photoshop cs2 won't run on intel macs with mac os x newer than snow leopard)
Did you ever have cs2 installed on this particular computer before?
If the problem is that you already installed cs2, but it won't activate, that's because adobe took the activation servers offline for some older adobe products such as cs2.
You'll need to use the non activation version of cs2 from here and the supplied serial number:
Activation server shut down for Creative Suite 2, Acrobat 7, and Macromedia products -
i was try to upgrade my iphone 3gs via iTunes but it is not activate.what are the process to upgrade ? now it is showing black screen to select country then finally write unable to activate.
Is there a sim in the iPhone?
Has the iPhone been jailbroken or modified to work with other
than the original wireless provider?
If you can get that far, what does it say when you look at
Settings=>General=>About=>Carrier? -
I refurbished my macbook air 7 months ago because there was a problem with the steady state drive. Now my battery seems to be dead again. How long does the warranty last? Do I need to pay for a new battery?
As I wrote Apple will diagnose an Apple product even if it is out of warranty for free. That should be your first step to find out if the problem is the battery or something else.
Once you have Apple telling you a 7 month old battery is defective (if that turns out to be the case) then it becomes a game of horse trading. You'll need to speak to the tech and when he tells you there is nothing he can do you will need to speak to the tech manager and when she says most likely there is nothing they can do you go to the store manager, etc. It is unlikely (though possible) that they will give in easily you need to be firm, polite and let on that you're willing to accept a partial reimbursement.
So again the first step is to find out what is wrong.
good luck -
I have 2 iphone with the same apple id. Now I want to use a different apple id for the iphones. How to do it? Help . Thank you!
Create a new Apple ID using a new valid e-mail address
https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
In iPhone's Settings > Store > Apple ID > Sign Out and sign in the new. -
I am having trouble with the Jpeg icons and also now thumbnails not being visable in bith teh Apple finder and now also Adobe Bridge. Can anyone shed any light on this ?
Argh - once again, I find my solution right after posting this. Left out one modification to the SWIG script, now it runs in 29 seconds vs C 16 seconds, I can live with that.
-
Hai, i tried to open itunes on my windows 8 laptop but it comes out with 'iTunes has stop working' notification and need to close the program everytime i try to load it. Please help! thanks.
Hi ajay-9,
Thanks for visiting Apple Support Communities.
The steps in this article can help if iTunes is quitting unexpectedly on your PC:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Cheers,
Jeremy
Maybe you are looking for
-
Unable to disconnect - files used by another program?
Looking for some help. Last few times I've connected my iPod to my computer, it won't let me eject it after the update is complete. When I click either eject button, I get a message claiming that some of the files are being used by another program an
-
Not sure if this is by design (if so, would love to know why!) or if this is a bug. Let's say I have auditing turned on for Accounts. I change the phone number in the Main Phone field from 555-1111 to 555-5555, and an audit record is created showin
-
Preloader not working in IE.
I created a preloader for an external swf. It works just fine in Firefox but when i tried to view it in IE the progress bar doesnt move at all. I need help to know why this isnt working, or at least an alternative way of doing a preloader that works
-
Java Web Start starting applet
Dear all, I like to run heavy application as an applet and the best way is keep the jar containing the application in the client. I am wondering whether I can use java web start or not to deploy in the client the jar with the applet and so the client
-
Signing with Smart Card (PKCS#11)
I'm trying to sign my .jar with ActivCard smart card and jarsigner.exe, but I got NullPointerException. I have succeeded to get list of certificates present on smart card. Is there better PKCS#11 provider then sun.security.pkcs11.SunPKCS11?