Whats with the price difference between america and australia with the new macbook with retina display why are aussies paying so much more

what is apple charging so much more for the same product when u convert 1999 us dollars to au dollar apple is over charging like $400

Silly child ...
I am not discussing individual policies, and only in the context of "cannot ciriticize Apple" ("over charging" in the original post.
Now go away away, boy ... you bother me!

Similar Messages

What are the major differences between BODS and Talend ?

Hi Friends,
We had a client meeting 2 days back regarding BODS project, But our client is showing more interest on Talend. We have explained/demo him on BODS. Could any one please tell me, What are the major differences between BODS and Talend ? What are the features of BODS which are not there in TELEND ?
Thanks,
Bheem.

Hi,
If you talk difference than Talend is an open source. SAP DS as huge advantage when it comes to loading data into SAP and it is more flexible with lots of inbuilt features and easy to load data into SAP using DS directly and extracting data from various legacy systems.

What is the fundamental difference between classful and classless routing?

Hello to all,
After reading several RFCs, guides and HOWTOs I am confused by an apparently trivial question - what is the basic, fundamental difference between classful and classless routing?
I am well aware that - said in a very primitive way - the classful routing does not make use of netmasks and instead uses the address classes while the classless routing utilizes the netmasks and does not evaluate the address classes.
However, already in 1985 the RFC 950 (Internet Standard Subnetting Procedure) stated that the networks can be further subnetted using the network mask. Since then the routers are expected to use network masks in the routing decision process in the precise way they use it nowadays. However, if the routers use network masks they are doing the classless routing, aren't they? Where is then the difference if we used to describe the 80's way of routing as a classful routing? Or was it already the classless routing? The RFCs about CIDR came gradually only in 1992 and 1993.
If somebody could give me an insight into the key difference between classful and classless routing (and perhaps into the Internet history, how was the real routing done then) I would be most grateful.
Thank you a lot!
Regards,
Peter

Hello Mohammed,
I am afraid we still have not understood each other ;) I am not looking for the algorithms used to select the best path. I am well aware of them, both Ford-Bellman and Dijkstra, and about their internals. By the way, these algorithms do not have any influence whether the routing is classful or classless because they deal with metrics, not with masks. For example, a classless EIGRP internally uses a distance-vector algorithm, not a SPF algorithm.
I will try to explain once more what is my problem... There are two terms commonly used but badly defined: the classless routing and classful routing. Originally, I have thought that the classful routing works as follows:
- The routing table consists only of classful destination networks (major nets), metrics and respective gateways. No network masks are stored in the table because we are classful, that is, we use exclusively the route classes and all entries in the routing table are already classful.
- When routing a packet, the router looks at its destination IP address and determines the major net of this IP address (that is, the classful network that this IP address belongs to). Then it looks up the corresponding entry in the routing table and sends the packet to the respective gateway.
I thought that the classful routing works in this way. I won't describe the classless routing - both of us know how do the today's routers select the next hop.
However, in the RFCs 917 and 950 which were published in 1985, long ago before the term 'classless routing' was coined, the network mask was already defined and it was stated how the routers should work with it.
Now I am confused. The terms classless addresses and classless routing were defined sometime in 1990's, therefore I assume that the routing before the invention of classless IP assignment can be in fact described as classful. In other words, I thought that the routing that was commonly used in 1980's did not use netmasks and can be described as classful because the notion of classlessness came first in 1990's. But now I see that netmasks were defined in 1985.
Now where am I wrong? Do I understand the classful routing properly as I described it? Is it correct to talk about routing in that era as classful although the netmasks were already in use? Or was it already the classless routing?
Basically I am trying to understand what was called the classful routing if the classless routing is said to be something different.
Mohammed, I am most grateful to you for your patience and suggestions! Thank you indeed.
Regards,
Peter

What is the main difference between Enhancements and BADI.?

What is the main difference between Enhancements and BADI.?plzz tell
Edited by: Alvaro Tejada Galindo on Feb 13, 2008 3:48 PM

CMOD is the Project Management of SAP Enhancements (i.e., SMOD Enhancements). SMOD contains the actual enhancements and CMOD is the grouping of those SMOD enhancements.
Difference Between BADI and User Exits
BADI's can be used any number of times, where as USER-EXITS can be used only one time.
Ex:- if your assigning a USER-EXIT to a project in (CMOD), then you can not assign the same to other project.
BADI's are oops based.
Business Add-Ins are a new SAP enhancement technique based on ABAP Objects. They can be inserted into the SAP System to accommodate user requirements too specific to be included in the standard delivery. Since specific industries often require special functions, SAP allows you to predefine these points in your software.
As with customer exits two different views are available:
In the definition view, an application programmer predefines exit points in a source that allow specific industry sectors, partners, and customers to attach additional software to standard SAP source code without having to modify the original object.
In the implementation view, the users of Business Add-Ins can customize the logic they need or use a standard logic if one is available.
In contrast to customer exits, Business Add-Ins no longer assume a two-level infrastructure (SAP and customer solutions), but instead allow for a multi-level system landscape (SAP, partner, and customer solutions, as well as country versions, industry solutions, and the like). Definitions and implementations of Business Add-Ins can be created at each level within such a system infrastructure.
SAP guarantees the upward compatibility of all Business Add-In interfaces. Release upgrades do not affect enhancement calls from within the standard software nor do they affect the validity of call interfaces. You do not have to register Business Add-Ins in SSCR.
The Business Add-In enhancement technique differentiates between enhancements that can only be implemented once and enhancements that can be used actively by any number of customers at the same time. In addition, Business Add-Ins can be defined according to filter values. This allows you to control add-in implementation and make it dependent on specific criteria (on a specific Country value, for example).
All ABAP sources, screens, GUIs, and table interfaces created using this enhancement technique are defined in a manner that allows customers to include their own enhancements in the standard. A single Business Add-In contains all of the interfaces necessary to implement a specific task.
The actual program code is enhanced using ABAP Objects. In order to better understand the programming techniques behind the Business Add-In enhancement concept, SAP recommends reading the section on ABAP Objects.

What is the main difference between menu_exits and user_exits

what is the main difference between menu_exits and user_exits

Hi,
User Exits:
A user exit is a three character code that instructs the system to access a program during system processing.
SXX: S is for standard exits that are delivered by SAP. XX represents the 2-digit exit number.
UXX: U is for user exits that are defined by the user. XX represents the 2-digit exit number
Menu Exits:
Menu exits add items to the pulldown menus in standard SAP applications. You can use these menu items to call up your own screens or to trigger entire add-on applications.
SAP creates menu exits by defining special menu items in the Menu Painter. These special entries have function codes that begin with "+" (a plus sign). You specify the menu items text when activating the item in an add-on project.
Regards,
Priyanka.

What is the main difference between ws_upload and gui_upload?

Hi All,
What is the main difference between ws_upload and gui_upload?
In what contexts should we use these two function modules??
Thanks,
Creasy

search the forum before posting.
You can find lot of posts related.

What are the practical differences betweens infopackages and process chains

Hi,
what are the practical differences betweens infopackages and process chains.
Thanks,
cheta.

Hello BW,
Hope the following links will give u a clear idea about process chains
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/events/sap-teched-03/using%20process%20chains%20in%20sap%20business%20information%20warehouse
Business Intelligence Old Forum (Read Only Archive)
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/c08b3baaa59649e10000000a11402f/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8da0cd90-0201-0010-2d9a-abab69f10045
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/19683495-0501-0010-4381-b31db6ece1e9
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/36693695-0501-0010-698a-a015c6aac9e1
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9936e790-0201-0010-f185-89d0377639db
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3507aa90-0201-0010-6891-d7df8c4722f7
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/263de690-0201-0010-bc9f-b65b3e7ba11c
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
regards,
Muralidhar Prasad.C

What is the main difference between eewb and aet tool ?

Dear all,
What is the main difference between eewb and aet? Both ways we can create fields and coming to aet is in crm 7.0 and eewb is in 6.0.when we are creating fields through eewb we should have technical knowledge but aet tool is a simple tool as a function people also can easily add the fields. I want to know is there any main difference between both these tools.
Regards,
Jemmi.

EEWB works from SAP GUI whereas AET works from WEB UI. AET is developed on top of the EEWB. Most the Objects are supported barring a few through AET. It's a very usefull tool for SAP CRM.
Since in CRM SAP GUI will be phased out soon, AET will be prominent. One will see lot more features in upcoming relase in AET tool.
Regards,
Harshit

What is the main difference between view and materialize view and advantage of Mview ??

What is the main difference between view and materialize view and advantage of Mview ??

1.A view uses a query to pull data from its associated tables.
2.Views do not have data's physically stored in the Database.
3.Views Get the Data from 2 or more tables and displays as a single block.
4.But a materialized view is a table on disk is a result set of a query done.
5.A Materialized view can have data's in the database.
6.Materialized view are used for Boosting the Performance.
7.And the important one is Materialized views are updated based on the parameters defined when they are created.
8.By using triggers we can update the data in a materialized view.
9.When you call a materialized view it will show the data when it was last updated.
Hope it helps.

What is badi?difference between bapi and badi?

what is badi?difference between bapi and badi?

Hi..
BADI is just an object-oriented version of user-exit. Instead of entering program code into some function module (as in customer-exit), you define some class which has to implement predefined methods and those methods are fired at predefined points just like an old user-exit. Some BADI can have multiple independent implementations which is much better for software deployment as several developers can implement the same BADI independently.
To understand BAPIs, you must know that there are 2 things. One is the SAP Object Repository of the Business Object Repository (BOR) and the Function Builder.
Now the business objects with their business processes and business data, reside in the BOR, with the corresponding BAPI. the implementation of this BAPI resides in the function builder. Any external world (non SAP) programs or legacy systems can access the business processes or data of any business object in the BOR, thru the process of invoking the BAPI implementation of the BAPI for this business object.
Thus we can access a business object.
So we can say that a BAPI is a process that allows third party s/w or non SAP programs to access SAP Business object data and processes.
<REMOVED BY MODERATOR>
Regards
- Rishika
Edited by: Alvaro Tejada Galindo on Jun 12, 2008 5:33 PM

Difference between -1 and null in the targettype filed

Hi
Could anyone advise what is the difference between -1 and null in the targettype filed in marketing documents?
For example, in Sales Quotation - Rows (QUT1) table, I found for some open sales quotations, the field is null however the DB help file suggest the default value is -1 so I suppose it should be -1 for open documents.
Many thanks for your advisory.

Hi, Qian!
I investigated that "-1" value appears in targettype field in Sales Quotation Rows (QUT1 table) when you Dublicate a Sales Quotation document (Ctrl + D). And NULL value appears when you create a new document without dublicating.
In case you want to equal these 2 "empty"-values using T-SQL, you can use ISNULL(targettype, -1) function - this will give you -1 for both the "empty"-values
HTH!
Message was edited by: Aleksey Kuznetsov

We have an older IMac (preIcloud) and just purchased a new Macbook Air. Our Iphones are set-up to synch with the IMAC and my calendars on the IMac & the phone look the same. But when I open ICal on the MacBook Air my calendar is missing items? Help..

We have an older IMac (preIcloud) and just purchased a new Macbook Air. Our Iphones are set-up to synch with the IMAC and my calendars on the IMac & the phone look the same. But when I open ICal on the MacBook Air my calendar is missing items? Help.

Are you wanting to import iCal to the MacBook Air. Since iCloud doesn't work with 10.6 OSX you probably don't have any data in iCloud yet?

I am going to replace my 3 year old MacBook Pro with a new MacBook Pro Retina display machine. I have been told by Apple that I can use the Migration Assistant ON MY WIRELESS NETWORK (no cables) to transfer data... I've read this can take AGES.. True?

I am planning to replace my 3+ year old MacBook Pro with a new MacBook Pro, Retina display... I have been told by "chat" on the Apple site that I can transfer my data wirelessly... on my network.. Is is a good option? I don't want to invest in cables if I can help it... since the old machine has firewire and the new one has thunderbolt! Will the wireless transfer take forever... as in 30-50 hours??? I've been hearing these horror stories...

Ralph Landry1 wrote:
Recently did one MacBook Pro to another for my daughter...almost full 500 GB HD estimate wireless was 48 hours, wired took a little over an hour.
Wow, shocking in comparison. You have the patience of a Saint !

What cases are good for the new macbook pro retina display 15"

What folio cases are out there that don't damage the new macbook pro retina display 15" I keep looking but can't find any, they all seem to have serious negative reviews

be specific, hard case or CARRY CASE?
hard cases are not recommended, trap in dust and junk and trap heat
A great carry case, and best made for the money are those made by INCASE as seen in Apple stores and amazon.com

Photoshop elements 10 will not migrate to my new macbook pro/retina display. There is no CD/DVD player on this machine. Any suggestions on how to get Elements onto my machine? Yes, I have the disk(s).

Photoshop elements 10 will not migrate to my new macbook pro/retina display. There is no CD/DVD player on this machine. Any suggestions on how to get Elements onto my machine? Yes, I have the disk(s). Am I going to have to buy an external CD/DVD player to load this one program:(

I have ordered a USB3 BluRay/DVD/CD player/burner and will use that both with my iMac ( in which the Superdrive seems to be failing ) and the MBPro Retina I just bought .

Whats with the price difference between america and australia with the new macbook with retina display why are aussies paying so much more

Similar Messages

Maybe you are looking for