Whats wrong with .mac an iWeb 08?
hi,
i try to publish my small website i made in iweb 08 to my .mac-account.
each kin d of publishing works, the "publish in a folder", "publish all to .mac" and so on.
but if i choose the the option "visit the site" after the publishing, i get an error.
and if i take a look at my idisk-folder "sites" oder"web", they are empty.
can you tell me, where i the files should be in my idisk, after the publishing?
thank you
michael
What is your username?
Your site should be in Web/Sites on .Mac.
If you are using a local copy of your iDisk, you might want to stop that and publish directly to .Mac.
Similar Messages
-
My phone has been asked to be plugged into itunes for the past hour or so, and it has been plugged in the whole time... i have tried holding in both buttons too turn it on and nothing is happening... whats wrong with it and how do i fix this :(?
Does iTunes see your phone?
Do you have a PC or a Mac?
~Lyssa -
My gen 4 ipod shuffle is not showing the green light when I switch it on (Green area shown). But when I plug it into the computer there initial orange blink and then solid orange. What wrong with it and how can I fix it.
Hello Korawees,
I was researching the issue you are describing and had a recommendation. The device is very simple, so the software troubleshooting for it is pretty limitted so I think you shoud restore the iPod shuffle and re sync the content. That way, if it is a software issue, this will fix it. Here is the article named Restoring iPod shuffle to factory settings found here: http://support.apple.com/kb/HT1481.
Before Starting
It is important to understand the difference between "update" and "restore." Update does not affect your settings or songs, it simply installs updated software that controls iPod shuffle. Restore erases the disk and restores iPod shuffle to its original factory condition with updated software. If you only need to update iPod shuffle, this should be done on the computer where music is normally synced. Updating on another computer will result in all songs being removed from iPod shuffle.
Warning: Because Restore erases all songs and files on iPod shuffle, make sure to back up any files you've saved on iPod shuffle. Your songs, podcasts, and audiobooks can be synced back to your iPod shuffle if the items are part of your iTunes library.
How to restore iPod shuffle
Ensure that you have an active Internet connection as new versions of iTunes and iPod Software may need to be downloaded to your computer.
Download and install the latest version of iTunes if you do not already have it installed.
Open iTunes, and then connect iPod shuffle to your computer.
After a few moments, iPod shuffle will appear in the Devices section on the left side of the Tunes window.
Select iPod shuffle under Devices and you will see information about it appear in the main iTunes window under the Summary tab/button for iPod shuffle (3rd and 4th generation) or the Settings tab/button for iPod shuffle (1st or 2nd generation).
The Version section tells you whether iPod shuffle is up to date or needs a newer version of the software.
Click the Restore button. You will be presented with one or more restore options that may prompt iTunes to automatically download the latest iPod Software. The 4-possible restore options are:
Restore Option 1: Restore - Restores with same iPod Software version already on iPod.
Restore Option 2: Use Same Version - Restores with same iPod Software version already on iPod even though a newer version is available.
Restore Option 3: Use Newest Version - Restores with the latest iPod Software currently on your computer.
Restore Option 4: Restore and Update - Restores after downloading the latest iPod Software on your computer.
If you are using a Mac, a message will appear prompting you to enter an administrator’s name and password.
A progress indicator will appear on the computer screen indicating that the restore process has started. Do not disconnect iPod shuffle during the restore process.
After the restore process is complete, the iPod shuffle's status light will flash orange continuously. The iPod Setup Assistant window will appear asking you to name your iPod and choose your syncing preferences as you did when you connected your iPod shuffle for the first time.
When you come to step 7, I recommend Restore Option 4.
Take care,
Sterling -
When I try to power up my iphone 4 32g, it will stay on the apple screen for a few seconds then turn off. even when I try connecting it to my computer it turns on for a few seconds then turns off. Whats wrong with it? and what do I do about it?
Have you tried charging it with another known working USB sync cable? After letting it sit to "charge" for at least 30 minutes, have you tried resetting the device by pressing and holding both the Select/Center and Menu buttons together long enough for the Apple logo to appear.
B-rock -
when i open itunes, it gives me a message "the folder itunes is on a locked disk or you do not have write permissions for this folder" i am the only user and it was working a week ago whats wrong with it? it will not open itunes
Hi lvdmerwe!
I have two articles here for you that should be able to help you troubleshoot this issue further:
Trouble adding music to iTunes library or importing audio CD
http://support.apple.com/kb/ts1387
iTunes: Missing folder or incorrect permissions may prevent authorization
http://support.apple.com/kb/ts1277
Take care, and thanks for visiting the Apple Support Communities.
-Braden -
i if use "search" in music on my ipod touch 5th gen the result just show only album and playlist but nothing song result.whats wrong with it?please help
The users guide says:
Spotlight searches the following:
Contacts—All content
Apps—Titles
Music—Names of songs, artists, and albums, and the titles of podcasts and videos
Podcasts—Titles
Videos—Titles
Audiobooks—Titles
Notes—Text of notes
Calendar (Events)—Event titles, invitees, locations, and notes
Mail—To, From, and Subject fields of all accounts (the text of messages isn’t searched)
Reminders—Titles
Messages—Names and text of messages
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsynce all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
HELP PLEASE - WHATS WRONG WITH THIS CODE
Hi. I get this message coming up when I try to compile the code,
run:
java.lang.NullPointerException
at sumcalculator.SumNumbers.<init>(SumNumbers.java:34)
at sumcalculator.SumNumbers.main(SumNumbers.java:93)
Exception in thread "main"
Java Result: 1
BUILD SUCCESSFUL (total time: 2 seconds)
I am not sure whats wrong with the code. Any assistance would be nice. The code is below.
package sumcalculator;
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class SumNumbers extends JFrame implements FocusListener {
JTextField value1;
JTextField value2;
JLabel equals;
JTextField sum;
JButton add;
JButton minus;
JButton divide;
JButton multiply;
JLabel operation;
public SumNumbers() {
SumNumbersLayout customLayout = new SumNumbersLayout();
getContentPane().setFont(new Font("Helvetica", Font.PLAIN, 12));
getContentPane().setLayout(customLayout);
value1.addFocusListener(this);
value2.addFocusListener(this);
sum.setEditable(true);
value1 = new JTextField("");
getContentPane().add(value1);
value2 = new JTextField("");
getContentPane().add(value2);
equals = new JLabel("label_1");
getContentPane().add(equals);
sum = new JTextField("");
getContentPane().add(sum);
add = new JButton("+");
getContentPane().add(add);
minus = new JButton("-");
getContentPane().add(minus);
divide = new JButton("/");
getContentPane().add(divide);
multiply = new JButton("*");
getContentPane().add(multiply);
operation = new JLabel();
getContentPane().add(operation);
setSize(getPreferredSize());
addWindowListener(new WindowAdapter() {
public void windowClosing(WindowEvent e) {
System.exit(0);
public void focusGained(FocusEvent event){
try {
float total = Float.parseFloat(value1.getText()) +
Float.parseFloat(value2.getText());
sum.setText("" + total);
} catch (NumberFormatException nfe) {
value1.setText("0");
value2.setText("0");
sum.setText("0");
public void focusLost(FocusEvent event){
focusGained(event);
public static void main(String args[]) {
SumNumbers window = new SumNumbers();
window.setTitle("SumNumbers");
window.pack();
window.show();
class SumNumbersLayout implements LayoutManager {
public SumNumbersLayout() {
public void addLayoutComponent(String name, Component comp) {
public void removeLayoutComponent(Component comp) {
public Dimension preferredLayoutSize(Container parent) {
Dimension dim = new Dimension(0, 0);
Insets insets = parent.getInsets();
dim.width = 711 + insets.left + insets.right;
dim.height = 240 + insets.top + insets.bottom;
return dim;
public Dimension minimumLayoutSize(Container parent) {
Dimension dim = new Dimension(0, 0);
return dim;
public void layoutContainer(Container parent) {
Insets insets = parent.getInsets();
Component c;
c = parent.getComponent(0);
if (c.isVisible()) {c.setBounds(insets.left+24,insets.top+48,128,40);}
c = parent.getComponent(1);
if (c.isVisible()) {c.setBounds(insets.left+256,insets.top+48,128,40);}
c = parent.getComponent(2);
if (c.isVisible()) {c.setBounds(insets.left+408,insets.top+48,56,40);}
c = parent.getComponent(3);
if (c.isVisible()) {c.setBounds(insets.left+488,insets.top+48,152,40);}
c = parent.getComponent(4);
if (c.isVisible()) {c.setBounds(insets.left+128,insets.top+136,72,40);}
c = parent.getComponent(5);
if (c.isVisible()) {c.setBounds(insets.left+248,insets.top+136,72,40);}
c = parent.getComponent(6);
if (c.isVisible()) {c.setBounds(insets.left+368,insets.top+136,72,40);}
c = parent.getComponent(7);
if (c.isVisible()) {c.setBounds(insets.left+488,insets.top+136,72,40);}
c = parent.getComponent(8);
if (c.isVisible()) {c.setBounds(insets.left+176,insets.top+48,56,40);}
}Thank you. How do i amend this? I have defined value1though.Yes, you did - but after the call to addFocusListener(...). It needs to be before it.
BTW, you did the same thing with "value2.addFocusListener(this)" and "sum.setEditable(true)" on the next two lines. You're attempting to call a method on an object that doesn't exist yet (i.e., you haven't called new yet). -
I have the Iphone 3gs and it said update required and i needed to connect to itunes so i did al that and now everytime i go to restore everything it just says error and then i have to do it again?whats wrong with it?
Are you getting an error message number with your error message? If so, what number are you getting?
-
My lap top is extremly slow. It studders. It kind of sounds like there is a fan inside and it constantly stopping and starting. And, it takes a really long time for it too start up. Whats wrong with it?
Do you have current backups?
Those symptoms could indicate a failing Hard drive. If it dies, all your documents go with it unless you have Backups.
I have had very good luck with physical and battery problem diagnosis at the Genius Bar. Those guys put their hands (and their ears) to these machines, all day every day, and they know immediately what all those sounds mean.
Your appointment for an evaluation is FREE, in warranty or out. -
after updating 4.3.1 to 4.3.3 my i phone 4's wifi is not working 2 to 3 hrs of it ,but 3 hrs i was downloding free soft 4m itunes.............so what wrong with my phone
Thanks for reply,
It's truely a disestar for me to kill my phone myself by so called bloody upgradation.
Iwish I have not upgraded.
I baught it from here in Bangladesh and now I’m ina mess to get at least a minimum support.
Thanks for your valued suggessions but it didn’tmade any difference to my situation.
So now I have an ipod in the price of an iPhone4. Crap.
Is there any chance of fixing this bug by apple?As the same problem has already been faced by a lot of iPhone Users. -
I just got a ipod nano 6th gen, and ive been using it for 2 days, and it seems that the battery just lasts about half a day, on playing 1 to 3 songs in intervals of 1-2 hours. Whats wrong with my ipod?
Your nano would really have nothing to do with it at that point. It is really something between iTunes and whatever server out there on the internet that it is trying to connect to for the update.
Try posting this one in the iTunes forum, they might have a solution for you.
i -
Whats wrong with the servers i cant download update 5.1 firmware
whats wrong with the servers i cant download update 5.1 firmware ive been trying for 2 days it says i dont have permission to access the requested source
What says you don't have permission to access the requested source? That is not an error that should come up at all either from iTunes or when attempting an over the air upgrade. At least not an error that has anything to do with the servers.
It could be a permissions problem on your computer or an issue being caused by your firewall or antivirus software. -
I have been trying to open itunes that has already been installed. But, the thing is it never opens and when i do right click and trouble shoot also, it doesnt open. I dont whats wrong with itunes and my comp is 64 bit windows 7. Can somebody please help
no its 64 bit version of itunes. Can you please help me. I am not able to sync my iphone.
-
What wrong with the buttery ?
hallow
my question about the buttery i don't know what wrong with it . the buttery get finish after one and half hour using .
please help me
my Email
[email protected]
my mobile
+966554302679Hi kamranh,
I'd try starting Firefox in [[Safe Mode]]. If you don't have the issue while all of your add-ons, extensions, and themes are disabled, you can try adding them back in one by one until you find the culprit. You should look at the [https://support.mozilla.org/en-US/kb/Troubleshooting-extensions-themes Extensions and Themes troubleshooting guide ] and the [[Troubleshooting plugins]] article as well.
From the looks of it though, your issue may be because you've been hit with some [https://support.mozilla.org/en-US/kb/Is%20my%20Firefox%20problem%20a%20result%20of%20malware?s=malware&r=0&e=sph&as=s#w_how-do-i-get-rid-of-malware Malware].
If isn't malware or a plugin issue, you should take a look at the Knowledge Base article [[Search bar]]. Your default search might have been changed by a particular site. Sites like MSN, Yahoo, etc have been know to ask to become your homepage and change your search engine.
If the address bar search has been changed as well, you might want to take a look at [[Location bar search]].
If that doesn't work you should look at the article [[Preferences are not saved]].
Hopefully this helps! -
select CASE WHEN TO_NUMBER(SUBSTR(TO_CHAR(START_TIME_TIMESTAMP,'DDMMYYYY HH24:MM:SS'),13,2))>0 AND TO_NUMBER(SUBSTR(TO_CHAR(START_TIME_TIMESTAMP,'YYYYMMDD HH24:MM:SS'),13,2)) <14
THEN TO_DATE(CONCAT(SUBSTR(TO_CHAR(START_TIME_TIMESTAMP,'YYYYMMDD HH24:MM:SS'),13,2)||'00',SUBSTR(TO_CHAR(START_TIME_TIMESTAMP,'YYYYMMDD HH24:MI:SS'),16)||'00'),'DD-MM-YYYY HH24:MI:SS') end
from table;
i have written this query.whats wrong with this query..........
the error is "literal does not match format string"
Reegards soumenWhy does your date_format loose, ununify and not fix ?
And what is your exact requirement?
>>
CASE WHEN
TO_NUMBER(SUBSTR(TO_CHAR(START_TIME_TIMESTAMP,'DDMMYYYY HH24:MM:SS'),13,2))>0
AND TO_NUMBER(SUBSTR(TO_CHAR(START_TIME_TIMESTAMP,'YYYYMMDD HH24:MM:SS'),13,2)) <14
<<
This is
CASE WHEN TO_CHAR(START_TIME_TIMESTAMP,'MM') between '01' and '13'
>>
THEN TO_DATE(CONCAT(SUBSTR(TO_CHAR(START_TIME_TIMESTAMP,'YYYYMMDD HH24:MM:SS'),13,2)
||'00',
SUBSTR(TO_CHAR(START_TIME_TIMESTAMP,'YYYYMMDD HH24:MI:SS'),16)||'00'),
'DD-MM-YYYY HH24:MI:SS')
<<
This is
TO_DATE(
TO_CHAR(START_TIME_TIMESTAMP,'MM"00"SS"00"),
'DD-MM-YYYY HH24:MI:SS')
Obviously, format is not matching !
SQL> select to_char(sysdate,'MM"00"SS"00') from dual;
TO_CHAR(
06004900
SQL> select to_date('06004900','DD-MM-YYYY HH24:MI:SS') from dual;
select to_date('06004900','DD-MM-YYYY HH24:MI:SS') from dual
ERROR at line 1:
ORA-01861: literal does not match format string
Maybe you are looking for
-
Can I upgrade my Lightroom 5 for the latest 6 version
Can I upgrade my Lightroom 5 for the latest 6 version
-
Link to User's MySite on Lync 2013 Contact Card does not work
Hello, we're running a sharepoint 2010 environment with a configured user profile service application and a mysite host. we're also running lync 2010 clients but are planning to upgrade to lync 2013. the it guys (including me) have already installed
-
How to creat a Password protected folder for pics, apps, contacts
I have kids who like to use my ipad and iPhone to play their games. But they can also sometimes accidentally click on apps of mine which they surely should not. Is there a way to put my apps which I would like to keep from them in a folder and then m
-
Operating System is Windows XP Service Pack 3. Wish to uninstall program and install later version of Mozilla Firefox - Firefox 10
-
Yesterday they charged my credit card for automatic topups. I never signed up for automatic charges. having only purchased a single set of credits several months ago to evaluate their system. I've never used their --- service beyond the first day, an