Whatsapp and E63 problem

Hi. I've been using E63 for the past 3 years. And had whatsapp installed for more than a year. Recently, my phone started slowing down terribly. At first I thought it was a memory problem. So i cleaned up my phone. Also did a hard reset/soft reset and all. Updated software. Nothing has worked for the past 3 months. After my phone would slow down, I'd usually remove my battery/sim/memory card and try restarting it. It worked fine for a few weeks. Now i have no other apps installed and the moment i install whatsapp, my phone stops working altogether: becomes slow, cant read texts/missed call notifs/etc. The moment i uninstall whatsapp, everything works fine.
What seems to be the problem? Please help immediately.

thulanijosh, your phone uses the operating system ‘Symbian/S60 3rd Edition, Feature Pack 1’. That is good, because all these phone models behave very much like yours. Because of this, we can start an Internet search … but wait a second: We do not have the exact wording of your error message! Consequently, give us the the note/warning/error you are facing in WhatsApp and in Email.
Because this might relate to your Internet configuration of the overall phone, which network operator do you use? I need this, because I have to figure out the access-point name for you. Then we can go for Nokia » Menu » Tools » Settings » Connection » Access points. Please, delete all except two: your Wi-Fi and your current network-operator’s Internet. If you do not find the latter, remove everything and go for Options » New access point » Access point name» there you enter the name you found at the above APNChanger website. Now, try again.
Did that work already?

Similar Messages

  • Whatsapp and ipad problem

    i bought whatsapp messenger and tried to download it then i found out that its not used for ipad ....
    then every time i open itunes on my PC it keeps on trying to download ...
    How i completely delete it and stop it from keeps timing out ??

    Your Internet connection appears not to be working. Try this: iOS: Troubleshooting Wi-Fi networks and connections

  • WhatsApp and Shortcut problem

    I just updated my X7 with Belle and everything seems to be fine except 2 things.
    1) Whenever I try to send a message through my WhatsApp Messenger keeping my phone horizontal,it just doesn't go.I mean I can type the message but I can't send it.And when I keep it vertical and press Enter,it goes.
    Please help me with that.
    2)Swiping down brings out the connectivity shortcut on the screen.But when I swipe up,it doesn't go back.When I keep the cellphone horizontal and swipe up,the connectivity screen goes back up.
    I don't really know what to do. 

    hey i dont have the same phone like you do.. But i also want to know why cant my nokia E5 download whatsapp.. Im paying for it.. And then when i go to my apps its not there and when i go to downloads it says that it failed... Can you help me?

  • Z1 bluetooth and network problem after updating to 1.136

    Hi,
    Last week I updated my phone via PC companion when it notified me a new system update was available. The update took me from Android 4.2.2 to 4.3, and the biuld number is now 14.2.A.1.136.
    I use my phone with a SmartWatch 2 all the time, and a SBH20 bluetooth headset in my car. Before the update everything worked fine, but now I have issues with bluetooth connectivity. My SmartWatch 2 randomly disconnects and reconnects to the phone, and so does the headset. In the watch, specifically the Whatsapp notification app by LIS software stopped getting notifications most of the time, although every once in a while it does. The SBH20 also randomly disconnects and sometimes it takes minutes to reconnect by itself. I already unpaired and paired again both devices, even reset the SmartWatch, and the problem persists.
    But the most recurrent issue is that the phone repeatedly notifies me to "Sign in to network"... and has problems connecting to the 4G and even to wi-fi networks, meaning that sometimes I don't get any data at all for who knows how long, because it happens randomly.
    One thing that seems to me is that every time i lose my bluetooth connections it's because (or at the same time) of whatever happens that triggers the "Sign in to network" notification.
    I was really happy of having purchased the whole package of phone, watch and headset, please help me with this.
    Leonardo

    This is the responses I go from Sony "Customer DON'T Care....." regarding bluetooth issues - 
    "We can advise Sony Xperia do not test our products with other manufacturer’s devices and so we can not confirm the two devices are compatible.
    As the handset has been updated this does indicate it is running different software which means the Bluetooth will have also been updated. Sadly, as Sony Xperia does not test our products with third party Bluetooth devices we will not have been able to foresee the change with your specific device.
    We could only suggest that you contact the manufacturer of the device for any further assistance as there is nothing further we could advise.
    We do apologise for any inconvenience this may have caused.
    It is not that the software does not work it is the fact that we have updated the bluetooth drivers withing the update you have which no longer makes the bluetooth compatable with your car kit, if you ahve not contacted the car manufacturer already then I would suggest contacting them and seeing if there are any updates needed to the car kit."
    Mmmmmm... so it seems that they DO NOT test any O/S upgrades against anything.....
    It seems strange that both Samsung(S3 running 4.3)  and HTC M* (running 4.4.2) both work perfectly with my car audio system and the "developers" at Sony cant... either that or they just do not care... The smart money is on the latter... My z1 is THE WORST PHONE THAT I HAVE EVER HAD THE MISFORTUNE OF OWNING....

  • Whatsapp and Facebook takes ages to load

    Hi,
    can anyone tell me why blackberry torch 9810 whatsapp and facebook taking ages to load and initialise when i off and off the phone. It takes more than a day to initialise.

    Hmm..
    Problem was that the loopback device wasn't running...
    Thanks a lot.

  • E63 - Problem with Synchronize emails with gmail

    Hello,
    I have a Nokia E63, and i have been using de Nokia Messaging with gmail. I used this service for 2 years, and yesterday August 9, 2012, the application stopped to function. The emails are not downloaded.
    Today August 10, 2012, i tried to install the application again, and the problem persists.
    You can help me?
    I am waiting for the response.
    Best regards.
    Francisco
    Uruguay - Latin America

    Hi Panchotomass,
    Welcome to the Nokia forum and thanks for your post.
    Your Nokia Messaging account can be deleted by your Care line. Simply call and ask them to remove the account off the database. Once the NM account has been deleted, make sure the email account is deleted from the phone as well, reboot the device and reconfigure the email account. This will set up a new Nokia Messaging account for you. 
    Iris9290
    If my post has helped you in any way, please accept it as a solution or click on the white star, so that other users will be able to benefit from it too.

  • I am not able to launch FF everytime i tr to open it, it says FF has to submit a crash report, i even tried doing that and the report was submitted too, but stiil FF did not start, and the problem still persists, please help me solve this issue in English

    Question
    I am not able to launch FF everytime i try to open it, it says FF has to submit a crash report,and restore yr tabs. I even tried doing that and the report was submitted too, but still FF did not start, and the problem still persists, please help me solve this issue
    '''(in English)'''

    Hi Danny,
    Per my understanding that you can't get the expect result by using the expression "=Count(Fields!TICKET_STATUS.Value=4) " to count the the TICKET_STATUS which value is 4, the result will returns the count of all the TICKET_STATUS values(206)
    but not 180, right?
    I have tested on my local environment and can reproduce the issue, the issue caused by you are using the count() function in the incorrect way, please modify the expression as below and have a test:
    =COUNT(IIF(Fields!TICKET_STATUS.Value=4 ,1,Nothing))
    or
    =SUM(IIF(Fields!TICKET_STATUS=4,1,0))
    If you still have any problem, please feel free to ask.
    Regards,
    Vicky Liu
    Vicky Liu
    TechNet Community Support

  • BOSD, Battery issues and Heating problem after iOS 8 upgrade

    i have upgraded my iPad mini to iOS 8. Ever since I upgraded to iOS 8 am facing blue screen issues and heating problem as well. This is really frustrating even the patch iOS 8.0.2 dint solve the problem. Are you guys listening our complaints. When will you fixing it.

    The same thing happened to me on my 2012 Subaru Outback.  I'm not sure this will help you since you have a Honda, but I'm posting this just in case.
    I paired the audio on my car with my iPhone 6.  However, when I turned the car off and back on again, the iPhone would not pair automatically.  I had to manually connect the iPhone with the car.  Turns out there are two separate bluetooth pairings on my car: one for phone which allows up to 5 devices and one for audio which allows only one device.  So I did the second bluetooth pairing for the phone (had already done the audio), and that fixed it.  YMMV

  • I am making code to try to make a game and my problem is that my code......

    I am making code to try to make a game and my problem is that my code
    will not let it change the hit everytime so im getting the first guy to hit 1 then next hits 8 and so on and always repeats.
    Another problem is that I would like it to attack with out me telling it how much times to attack. I am using Object oriented programming.
    Here is the code for my objects:
    import java.lang.*;
    import java.io.*;
    import java.net.*;
    import java.util.*;
    import java.util.Random;
    import static java.lang.Math.*;
    import java.awt.*;
    import java.awt.color.*;
    class rockCrab {
         //Wounding formula
         double sL = 70;                                   // my Strength Level
         double bP = 1;                                   // bonus for prayer (is 1 times prayer bonus)
         double aB = 0;                                 // equipment stats
         double eS = (sL * bP) + 3;                         // effective strength
         double bD = floor(1.3 + (eS/10) + (aB/80) + ((eS*aB)/640));     // my base damage
         //Attack formula
         double aL = 50;                                   // my Attack Level
         double eD = 1;                                   // enemy's Defence
         double eA = aL / eD;                              // effective Attack
         double eB = 0;                                   // equipment bonus'
         double bA = ((eA/10) * (eB/10));                    // base attack
         //The hit formula
         double fA = random() * bA;
         double fH = random() * bD;
         double done = rint(fH - fA);
         //health formula
         double health = floor(10 + sL/10 * aL/10);
         rockCrab() {
         void attack() {
              health = floor(10 + sL/10 * aL/10);
              double done = rint(fH - fA);
              fA = random() * bA;
              fH = random() * bD;
              done = rint(fH - fA);
              System.out.println("Rockcrab hit" +done);
    import java.lang.*;
    import java.io.*;
    import java.net.*;
    import java.util.*;
    import java.util.Random;
    import static java.lang.Math.*;
    import java.awt.*;
    import java.awt.color.*;
    class self {
         //Wounding formula
         double sL = 1;                                   // my Strength Level
         double bP = 1;                                   // bonus for prayer (is 1 times prayer bonus)
         double aB = 0;                                 // equipment stats
         double eS = (sL * bP) + 3;                         // effective strength
         double bD = floor(1.3 + (eS/10) + (aB/80) + ((eS*aB)/640));     // my base damage
         //Attack formula
         double aL = 1;                                   // my Attack Level
         double eD = 1;                                   // enemy's Defence
         double eA = aL / eD;                              // effective Attack
         double eB = 0;                                   // equipment bonus'
         double bA = ((eA/10) * (eB/10));                    // base attack
         //The hit formula
         double fA = random() * bA;
         double fH = random() * bD;
         double done = rint(fH - fA);
         //health formula
         double health = floor(10 + sL/10 * aL/10);
         self() {
         void attack() {
              health = floor(10 + sL/10 * aL/10);
              fA = random() * bA;
              fH = random() * bD;
              done = rint(fH - fA);
              System.out.println("You hit" +done);
    }Here is the main code that writes what the objects do:
    class fight {
         public static void main(String[] args) {
              self instance1 = new self();
              rockCrab instance2 = new rockCrab();
              instance2.health = instance2.health - instance1.done;
              System.out.println("You hit: " +instance1.done);
              System.out.println("rockCrabs health: " + instance2.health);
              instance1.health = instance1.health - instance2.done;
              System.out.println("RockCrab hit: " +instance2.done);
              System.out.println("rockCrabs health: " + instance1.health);
              instance2.health = instance2.health - instance1.done;
              System.out.println("You hit: " +instance1.done);
              System.out.println("rockCrabs health: " + instance2.health);
              instance1.health = instance1.health - instance2.done;
              System.out.println("RockCrab hit: " +instance2.done);
              System.out.println("rockCrabs health: " + instance1.health);
              instance2.health = instance2.health - instance1.done;
              System.out.println("You hit: " +instance1.done);
              System.out.println("rockCrabs health: " + instance2.health);
              instance1.health = instance1.health - instance2.done;
              System.out.println("RockCrab hit: " +instance2.done);
              System.out.println("rockCrabs health: " + instance1.health);
              instance2.health = instance2.health - instance1.done;
              System.out.println("You hit: " +instance1.done);
              System.out.println("rockCrabs health: " + instance2.health);
              instance1.health = instance1.health - instance2.done;
              System.out.println("RockCrab hit: " +instance2.done);
              System.out.println("rockCrabs health: " + instance1.health);
    }when the code is run it says something like this:
    you hit 1
    RockCrabs health is 9
    RockCrab hit 7
    your health is 38
    you hit 1
    RockCrabs health is 8
    RockCrab hit 7
    your health is 31
    you hit 1
    RockCrabs health is 7
    RockCrab hit 7
    your health is 24
    you hit 1
    RockCrabs health is 6
    RockCrab hit 7
    your health is 17
    my point is whatever some one hits it always repeats that
    my expected output would have to be something like
    you hit 1
    RockCrabs health is 9
    RockCrab hit 9
    your health is 37
    you hit 3
    RockCrabs health is 6
    RockCrab hit 4
    your health is 33
    you hit 2
    RockCrabs health is 4
    RockCrab hit 7
    your health is 26
    you hit 3
    RockCrabs health is 1
    RockCrab hit 6
    your health is 20
    Edited by: rade134 on Jun 4, 2009 10:58 AM

    [_Crosspost_|http://forums.sun.com/thread.jspa?threadID=5390217] I'm locking.

  • Remote and IR Problem

    A rather odd and annoying problem has recently been occuring on my MBP. A couple days ago my remote (after working without fail for over a year now) suddenly stopped working. Yesterday night and this morning it started working again but after a while it stopped again. I've read dozens of support articles which haven't really helped because there seems to be another problem.
    Most articles have stated that there is an option to disable the IR receiver in the "security" window under system preferences. When the IR and remote are not working this option disappears but when they are working the option is present. I have also tried replacing the battery without any result.
    I am now thinking that it might have something to do with heat buildup because it is mainly occuring after the laptop has been on for about a half hour, so I am going to try to borrow someone's fan.
    If anyone has any suggestions to solve this I would appreciate it if you could help. Thanks!
    MacBook Pro 1.83 GHz   Mac OS X (10.4.9)  

    check out this thread. Seems to be the same problem.
    http://discussions.apple.com/thread.jspa?messageID=4701905&#4701905

  • How share content on whatsApp And Instagram for windows phone 8.1 App Development

    I am developing an App using sharie Contract Ux (using DataTransferManager )
    sample code is given below it is showing facebook ,twitter but not showing whatsApp and Instagram .
    Am I missing something ?
    public sealed partial class MainPage : Page
    private DataTransferManager dataTransferManager;
    public MainPage()
    this.InitializeComponent();
    this.NavigationCacheMode = NavigationCacheMode.Required;
    /// <summary>
    /// Invoked when this page is about to be displayed in a Frame.
    /// </summary>
    /// <param name="e">Event data that describes how this page was reached.
    /// This parameter is typically used to configure the page.</param>
    protected override void OnNavigatedTo(NavigationEventArgs e)
    // TODO: Prepare page for display here.
    // TODO: If your application contains multiple pages, ensure that you are
    // handling the hardware Back button by registering for the
    // Windows.Phone.UI.Input.HardwareButtons.BackPressed event.
    // If you are using the NavigationHelper provided by some templates,
    // this event is handled for you.
    this.dataTransferManager = DataTransferManager.GetForCurrentView();
    this.dataTransferManager.DataRequested += new TypedEventHandler<DataTransferManager, DataRequestedEventArgs>(this.OnDataRequested);
    protected override void OnNavigatedFrom(NavigationEventArgs e)
    this.dataTransferManager.DataRequested -= new TypedEventHandler<DataTransferManager, DataRequestedEventArgs>(this.OnDataRequested);
    private void OnDataRequested(DataTransferManager sender, DataRequestedEventArgs args)
    var request = args.Request as DataRequest;
    DataPackage requestData = request.Data;
    requestData.Properties.Title = "MY PHOTO";
    requestData.Properties.Description = "Share App";// The description is optional.
    requestData.Properties.ContentSourceApplicationLink = new Uri("ms-appx-web:///" + "www.google.com");
    // It's recommended to use both SetBitmap and SetStorageItems for sharing a single image
    // since the target app may only support one or the other.
    List<IStorageItem> imageItems = new List<IStorageItem>();
    imageItems.Add(this.imageFile);
    requestData.SetStorageItems(imageItems);
    RandomAccessStreamReference imageStreamRef = RandomAccessStreamReference.CreateFromFile(this.imageFile);
    requestData.Properties.Thumbnail = imageStreamRef;
    requestData.SetBitmap(imageStreamRef);
    // succeeded = true;
    private async void SelectImageButton_Click(object sender, RoutedEventArgs e)
    // CoreApplicationView view = CoreApplication.GetCurrentView();
    //FileOpenPicker imagePicker = new FileOpenPicker
    // ViewMode = PickerViewMode.Thumbnail,
    // SuggestedStartLocation = PickerLocationId.PicturesLibrary,
    // FileTypeFilter = { ".jpg", ".png", ".bmp", ".gif", ".tif" }
    StorageFile logoFile =
    await Package.Current.InstalledLocation.GetFileAsync("Assets\\download.jpg");
    // List<IStorageItem> storageItems = new List<IStorageItem>();
    this.imageFile = logoFile;
    // ImageHolder.Source = "/Assets/download.jpg";
    Output.Visibility = Visibility.Visible;
    ShareStep.Visibility = Visibility.Visible;
    // if (pickedImage != null)
    // this.imageFile = pickedImage;
    // // Display the image in the UI.
    // IRandomAccessStream displayStream = await pickedImage.OpenAsync(FileAccessMode.Read);
    // BitmapImage bitmapImage = new BitmapImage();
    // bitmapImage.SetSource(displayStream);
    // ImageHolder.Source = bitmapImage;
    //// this.rootPage.NotifyUser("Selected " + pickedImage.Name + ".", NotifyType.StatusMessage);
    // ShareStep.Visibility = Visibility.Visible;
    private StorageFile imageFile;
    private void Button_Click(object sender, RoutedEventArgs e)
    DataTransferManager.ShowShareUI();

    Whatsapp and Instagram must not be Share Targets for the type of content you are sharing.
    Bret Bentzinger (MSFT) @awehellyeah

  • LG Ally text message and gps problems

    hello. ive been with verizon for about 10 years maybe. ive been overall happy with the service and customer service. but the prices should be alot lower.lol. i started out with the motorolas then switched to the lg phones. only problem with the motorola was the speakers. not loud enough. could never hear the phone ring. the lgs usually suffer from the same problem.
    i had a few phone problems but nothing like this lg ally. im on my second one and about to be my 3rd one in about 3 months. 1st phone i had every problem under the sun. this phone i am suffering from text message problems and gps problems. i suffer from what everyone else has problems with. the messages wont send. they will eventually lock up. it will show the envelope with the red explanation point ( i think thats the graphic). then usually everytime when i sent a text the texts will close. it will send then bounce back and show up as a draft and i have to resend it and wait for it to go thru. finally the last problem with the texts. when i send a text a phone number from my contacts shows up and freezes on the screen. its in white text with a black background. its the same number every time. it stays on the screen until i restart or pull my battery out.
    gps. when i open up google gps that comes with the phone i make sure the gps is on... when the directions are found and the map pops up 9 out of 10 times it just keeps saying searching for gps. the turn by turn never is found. the 1 time it does it takes a good 10 minutes to be found. atleast on my first one ally the gps did work 8 out of 10 times. it just took a good 5-10 minutes for gps to be found and show turn by turn.
    anyone else have these problems? where you able to fix them or did you need to get a new phone? the 2.1 update was supposed to fix problems. i think they just made it worse. the ally is supposed to have 2.2 froyo. where is it. is it ever going to get it. i got this phone because i like the lgs and the keyboard. also the sales representative on the phone was giving the lg ally rave reviews. why couldnt he say dont buy this go with a motorola droid. this phone is the biggest junk ever made

    I do apologize you are having trouble with your device I looked in our information system on the LG Ally in reguards to issues you are having it states if you have the Free Droid Security anti virus protection application down loaded it will cause the phone to lock up or freeze. Check and make sure you do not have the application on your device. Check you GPS settings and make sure correct. Go to Settings; Location & Security; make sure GPS is on wireless network. If this does not fix issue you can try doing a Master Reset on your device. Make sure your contacts are saved in your G-mail account or through Back Up Assistance.
    Master Reset/Soft Reset:
    Factory Reset option 1
    From the main screen, touch menu tab
    Touch Settings
    Touch Privacy
    Touch Factory Data reset
    Touch Reset Phone
    Warning: This will erase all data from your phone, including:
    Your Google account
    System and application data and settings
    Downloaded Applications
    It will not erase: Current System software and bundled applications; SD Card files, such as music or Photos
    Factory Reset option 2  - Warning this will reset device back to original factory settings.
    Turn off the phone
    Press and hold "home" + "end" + "volume up or down" keys together for a few seconds when the device is power off
    Once device displays boot information, release keys.
    Soft Reset
    Press the Power key.
    Touch Power off.
    Touch OK.
    Press the Power key to power on the device.
    or
    Remove battery cover, remove battery and reinstall.Also there is a new update for LG Ally it will be the Froyo 2.2 but there is not release date available at this time it will post on your device when available. Hope this Helps. Leslie

  • I am deleting files through my trash in my macbook pro (2010) and then emptying the trash can, but my hard disk space is not increasing! i recently upgraded to lion and the problem is new, wasn't the same with snow leopard! HELP!!!!!

    i am deleting files through my trash in my macbook pro (2010) and then emptying the trash can, but my hard disk space is not increasing! i recently upgraded to lion and the problem is new, wasn't the same with snow leopard! HELP!!!!!
    When i press command+I (Get Info) i see that there is 140 GB "Available Space" on my hard disk but when i click on my hard disk icon on the desktop, and then press "space" i only see 102 GB free!! What the f*???
    Please HELP!!!!!! Getting second thoughts on Lion!!!!

    Hi b,
    Have you restarted yet?

  • How do I fix my ipod classic that says very low batter after I have charged it and the problem persists?

    I have an Ipod video 30g that says Please wait very low battery. I charged it for about a day and the problem persists. I've tried using some solutions on the internet and none of them worked including: holding the menu and select, holding select and play to put it in disk mode with no avail. Is there anyone who can help me!!!

    Have you read this post written by another forum member?
    The Sad iPod icon.
    However, as your iPod was purchased on Boxing Day, why not get it serviced under the warranty?
    You can arrange online service here.
    Service request.
    Or if an Apple store is near you, take it there and have them check your iPod.
    You can make an appointment by using this link.
    Genius Bar Appointments.

  • It's so annoying!! I have created a new Apple ID but after I click verify it just goes back to the previous page!!! It''s really frustrating I have tried for more than 4H, and the problem is not about the apple ID. I can download apps with the apple ID, w

    It's so annoying!! I have created a new Apple ID but after I click verify it just goes back to the previous page!!! It''s really frustrating I have tried for more than 4H, and the problem is not about the apple ID. I can download apps with the apple ID, which means IMessage is the problem! I restarted my iPad, I logged in and out of the apple ID in the store, AND YET IT STILL WON'T WORK, PLEASE HELP!

    Hi Vmanfromusa!
    It sounds like you are having an issue with activating your iMessage app on your iPad. An article outlining some troubleshooting steps for this issue can be found here:
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/ts4268
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

Maybe you are looking for

  • Txt file to XML using File Adapter

    Dear  ALL, I am doing file to file scenario, where i have to convert txt file from sender to xml as receiver . I have done with all the conversion content parameters at the sender file adapter as below: DocumentName: DocumentNamespace: RecordsetName:

  • Font changes in a pdf document

    A document was created in Word, converted to pdf and e-mailed to be signed and returned.  Upon receipt of the signed document, it was noticed that some of the fonts had changed throughout the document.  How can a font change on a pdf'd document?

  • Display Locking Up

    Just got my new MacbookPro 17in. I'm having problems when the energy saver kicks in and the screen starts to go dim, when I click any key to wake it back up the entire screen goes 90% black. Then after trying to get it to stop doing that the screen j

  • Audit Vault and DB Firewall Design

    I have and application (JAVA Based) connected to the database 11g using JDBC, I am going to implement Audit Vault and DB firewall R12 for three reasons: 1. monitoring the traffic 2. blocking un wanted SQL statements. 3. blocking un wanted IPs/Users O

  • How can I add a new mailbox?

    would appreciate your help can't find out how to add a mailbox Many Thanks