Whatsapp application error - failed to save audio note

In Whatsapp their is Application error coming as Failed to save audio Note!
I can't send audio file with in whatsapp.. So How can I fix This Please Give a Solution to this!
Thank you!

Can you please email us your adobe id (story's login email) and the name of the document for which you are getting this error at DL-AdobeStory-Support<at>adobe<dot>com ?
To investigate the pdf import error can you please send us that pdf document too in the mail?
Thanks

Similar Messages

" FAILED TO SAVE DOCUMENT" " NOT SUPPORTED"

I have a Crystal Report that I have worked on for serveral hours and that I have saved throughout the day; however, when I try to save it now, I get the following error:
" FAILED TO SAVE DOCUMENT" I hit OK and then the following appears.
" NOT SUPPORTED"
I am not able to save it anywhere or rename it.
Has this happened to anyone else?

Hello,
Typically when you get permission issue it's due to file system permissions, registry permissions or even WEB access. Open up Crystal Designer and check off the option for updates. Firewalls and anti-virus software can cause access issues also. This is not a CR issue but some permission problem and there can be many sources causing Cr to fail like this. Depending on the OS it can also be read/write permissions on the folder you are trying to save to.
Make sure you are a local PC administrator and have full rights to install software. If you have an IT department check with them to verify they have not pushed out Profile updates to modify your permissions, you may be an Administrator but IT may have altered the default permissions.
There are also install issues affected by DEP, Firewall and Anti-virus software, thus the warning about disabling all applications when installing. Quite often also doing a Repair install from Add/Remove programs will resolve issues, in your case Disconnect from the network by disabling your network card and then stop the firewall and and Anti-V then do a repair install.
Now test your report by saving it locally, do not save it to a network share and see if that works. If it does then start up your firewall and anti-V and then re-connect to your network and test again. If it now fails look at configuring those security suits to allow CR full access to the network, system resources and WEB.
Removed registry to clean up formatting:
Other tools are ProcessMonitor, add crw32.exe to the filter and then when you try to save the report watch the logs to see what Access Denied notes are logged. This should tell what you need to add to your system to get full access.
There are 1000's of users who do not have this problem and only a few who do so it's not likely a CR issue.
Thank you again
Don
Edited by: Don Williams on May 13, 2010 8:29 AM

RWRBE60.EXE - Application Error. The memory could not be written - URGENT !

Hi,
We are getting the error "RWRBE60.EXE - Application Error. The memory could not be written" in two of the 5 machines. That too, this error is encountered only some times and not always.
Scenario: The report builder generates the .PDF file and places it in the network path. The report is called from the forms 6i. We are using the Report Builder - 6.0.8.20.1.
This error is encountered in only 2 machines but not always.
It's a critical release issue. Could any let us know the possible solution?
Thanks,
Uma

Thanks. We can not re-install the report builder now. How do I check whether memory is sufficient or not?

RWRBE60.EXE - Application Error. The memory could not be "read" - URGENT !

Hi,
We are getting the error "RWRBE60.EXE - Application Error. The memory could not be written" in some of the machines. That too, this error is encountered only some times and not always.
Scenario: The report builder generates a .RTF file and places it in the network path. The report is called from the forms 6i. We are using the Report Builder - 6.0.8.25.0.
This error is encountered only in some machines but not always.
It's a critical release issue. Could any let us know the possible solution?
Thanks,
Monica

Thanks. We can not re-install the report builder now. How do I check whether memory is sufficient or not?

Error: Failed to save script

When trying to save a script I recive the following error:
This happens in both the online and offline modes in the desktop application (on mac) and in the browser application (chrome).
Also I could not import a pdf into story while in online mode in either the desktop or web browser.
I tried re-installing air and story yet no go still
HELP!
Running 10.8.4
Air installer 3.7
Adobe story plus (via creative cloud)

Can you please email us your adobe id (story's login email) and the name of the document for which you are getting this error at DL-AdobeStory-Support<at>adobe<dot>com ?
To investigate the pdf import error can you please send us that pdf document too in the mail?
Thanks

Error:" Failed to save package list! "while creating package

Hello
I m working in BPC 7.5 NW version.Here I am trying to create a package for the process chain /CPMB/IMPORT_IOBJ_MASTER and /CPMB/IMPORT_IOBJ_HIER,however when I am trying to save them to the package list, an error is popping up saying"Failed to save package list!".
Can anyone say me what would be the reason for such error, where can I debug and fix it?
Thanks in advance.
Divya

Hi,
Please check your Task profile whether all tasks in DM were given to your ID or not. So please check your
Security then try to save it. If still problem exists, please let us know so that we will try to explore it.
Raghu B.S.

Why do I get the Application Error jqsnotify.exe-Application Error. The memory could not be read?

Why do I get this error message every time i opened up Firefox saying: jqsnotify.exe-Application Error and then at the bottom line it says: The instruction at "0x5ff3d322"referenced memory at " 0xe41203c3". The memory could not be "read". Click on OK to terminate the program.
== This happened ==
Every time Firefox opened
== I recently renewed and installed the CA Security Suite and un-installed Firefox and re-installed it again.

System restore did it for me........!!!! It's gone and I don't miss it one bit.....!!!! May be one of those untraceable tricks that hackers use to irritate people.....Some security programs can identify these things ,but the perps usually use bogus addresses to send them anyway...Cyber criminals SUCK....<u>That is right ,I said that....</u> and they should be jailed and fined and suspended from internet usage all over the globe....
Reverend K.
CEO,FOUNDER,Site Editor,
http://WWW.CCCINTL.NET

Smartview Error: Failed to save data on the worksheet

Has anyone gotten a Smartview error when saving a spreadsheet of: Failed to Save data on the worksheet?
If so was there any resolution to the error?
Thanks!

hi
i am afraid its a bug
please have a look at Re: Smartview "Failed to Save data on the Worksheet"
regards
alexander

Application Server failed to start- Could not sign on to database HR91

Hello there,
I am not able to boot App Server Domain (started but the status is idle.) In the log, i also find the message that
PSBRKDSP_dflt.452 (0) [04/01/11 23:35:53](0) PeopleTools Release 8.51 (WinX86) starting. Tuxedo server is PUBSUB(98)/100
PSPUBDSP_dflt.2996 (0) [04/01/11 23:35:53](0) PeopleTools Release 8.51 (WinX86) starting. Tuxedo server is PUBSUB(98)/200
PSSUBDSP_dflt.2324 (0) [04/01/11 23:35:53](0) PeopleTools Release 8.51 (WinX86) starting. Tuxedo server is PUBSUB(98)/300
PSBRKDSP_dflt.452 (0) [04/01/11 23:35:53](0) Cache Directory being used: C:\Users\Administrator\psft\pt\8.51\appserv\HR91\CACHE\PSBRKDSP_dflt_100\
PSBRKDSP_dflt.452 (0) [04/01/11 23:35:53](1) GenMessageBox(200, 0, M): PS General SQL Routines: Missing or invalid version of SQL library PSORA (200,0)
PSBRKDSP_dflt.452 (0) [04/01/11 23:35:53](1) GenMessageBox(0, 0, M): Database Signon: Could not sign on to database HR91 with user PS.
PSPUBDSP_dflt.2996 (0) [04/01/11 23:35:54](0) Cache Directory being used: C:\Users\Administrator\psft\pt\8.51\appserv\HR91\CACHE\PSPUBDSP_dflt_200\
PSPUBDSP_dflt.2996 (0) [04/01/11 23:35:54](1) GenMessageBox(200, 0, M): PS General SQL Routines: Missing or invalid version of SQL library PSORA (200,0)
PSPUBDSP_dflt.2996 (0) [04/01/11 23:35:54](1) GenMessageBox(0, 0, M): Database Signon: Could not sign on to database HR91 with user PS.
PSSUBDSP_dflt.2324 (0) [04/01/11 23:35:54](0) Cache Directory being used: C:\Users\Administrator\psft\pt\8.51\appserv\HR91\CACHE\PSSUBDSP_dflt_300\
PSSUBDSP_dflt.2324 (0) [04/01/11 23:35:54](1) GenMessageBox(200, 0, M): PS General SQL Routines: Missing or invalid version of SQL library PSORA (200,0)
PSSUBDSP_dflt.2324 (0) [04/01/11 23:35:54](1) GenMessageBox(0, 0, M): Database Signon: Could not sign on to database HR91 with user PS.
PSBRKDSP_dflt.452 (0) [04/01/11 23:35:54](0) Server failed to start
PSPUBDSP_dflt.2996 (0) [04/01/11 23:35:54](0) Server failed to start
PSSUBDSP_dflt.2324 (0) [04/01/11 23:35:54](0) Server failed to start
Below is the information of my configuration file.
[Startup]
;=========================================================================
; Database Signon settings
;=========================================================================
DBName=HR91
DBType=ORACLE
UserId=PS
UserPswd=PS
ConnectId=people
ConnectPswd=peop1e
ServerName=HR91
StandbyDBName=
StandbyDBType=
StandbyUserId=
StandbyUserPswd=
[Database Options]
;=========================================================================
; Database-specific configuration options
;=========================================================================
SybasePacketSize=
UseLocalOracleDB=0
;ORACLE_SID=
EnableDBMonitoring=1
PSDB Maximum Cursors=
[Security]
;=========================================================================
; Security settings
;=========================================================================
Validate Signon with Database=0
DomainConnectionPwd=PS
Also, i can use PS/PS log into the Datamover but can not use them to log into the application designer
Any help will be appreciated...
Thank you

bandar wrote:
When you have a oracle server running on the same physical machine, why do you need client to support your needs?
As you said, your oracle client installation might be an error, u can always point BIN on app server to your server installation and start the server.That was true up to Oracle 11.1 because the 32bit librairies were shipped in ORACLE_HOME even if that one was a 64bit installation.
It has been dramatically changed within Oracle 11.2 though. The 32bit libraries are not coming anymore within the Oracle 11.2 64bit, you have to explicitely install a 11.2 32bit client to make it work with Peoplesoft on Windows. And configure your Peoplesoft installation to work within that 32bit client.
Consequently, if you have all together installed on the same server (Oracle database 11.2 64bit and Peoplesoft), you must have two Oracle homes : one for the 64bit database, one for the 32bit client.
Nicolas.

EPM Error - Failed to save data

Hi Gurus,
While saving the input form i am getting following error. its happening with one account dimension member only.
Regards.
Surya

Hi Surya,
Basically work status is locking mechanism of BPC. As i said earlier the whole work status concept works on the owner manager relationship. So try to understand the concept of owner and manager relation and how it works in bpc. In work status only owner or manger have access to do certain activities. So to understand the concept of work status go through below links.
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/50b09db3-2709-2d10-8493-846a5ee00ef4?overridelayout=t…
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70f99970-8c09-2d10-d486-8989be63d8cc?QuickLink=index&overridelayout=true&47047071760394
Configuring Work Status Feature in BPC (Part 1)
Configuring Work Status Feature in BPC (Part 2)

Audio Note Failure?

I am not able to use my audio note on whatsapp post the ios 7 update.It says failed to save the audio note.When i used ios 6 i had no such issues.Its also quite baffling seeing my friends using ios 7 having no issues with this.
So any suggestions to rectify it?

Go to settings-privacy-microphone and turn whatsapp slider on. Voila
Read more: On the iPhone5 I`m getting error failed to save audio note on whatsapp? - On whatsapp I tried recording and sending an audio note but I`m getting a message that says error failed to save audio note. How do I correct this? :: AskMeFast at http://www.askmefast.com/On_the_iPhone5_Im_getting_error_failed_to_save_audio_no te_on_whatsapp-qna7276397.html

MDT 2012 'Failed to save Environment to (80070057) Error during Windows 7 x64 Pro Deployment

Hi There,
I've been using MDT for a little while now, but I'm having problems successfully deploying an image to a batch of new laptops. The laptop HDD's are completely blank, and I am PXE booting using an x64 Litetouch Image via WDS. I have successfully captured
my image from a reference laptop (the same model that I'm trying to image), and I am now trying to deploy it using a standard client task sequence.
The 'Install operating System' phase seems to go ok, but then sits for quite some time at the 'Applying Unattend.xml' stage, then eventually, I get a general error 'Task Sequence Failed - 80004005'. I then exit MDT (it doesn't reboot as it should), and let
the laptop boot, which it does, and logs straight on into Windows, but gives me error along the lines of 'can't find the litetouch script', which I assume means MDT hasn't been able to copy it across. The laptop is however joined to our domain, and I pretty
much just have to tick the 'require a password to log on to this computer' box in user accounts, and all looks ok.
So in summary, the image is applying, but the laptop is not rebooting and running the final cleanup scripts.
I have already changed the SATA mode to IDE, instead of AHCI, having read this sometimes causes problems. I also read that systems with UEFI BIOS can also cause problems with MDT, but I'm not sure if this is the case.
I have edited my customsettings.ini, to copy log files back to my server, which it has done for me. Having looked at the logs (with CM Trace), I can see these errors:
Failed to save environment to (80070057)
TSManager 26/03/2014 15:48:09
1820 (0x071C)
Failed to save the current environment block. This is usually caused by a problem with the program. Please check the Microsoft Knowledge Base to determine if this is a known issue or contact Microsoft Support Services for further assistance.
The parameter is incorrect. (Error: 80070057; Source: Windows)
TSManager 26/03/2014 15:48:09
1820 (0x071C)
Failed to persist execution state. Error 0x(80070057)
TSManager 26/03/2014 15:48:09
1820 (0x071C)
Failed to save execution state and environment to local hard disk
TSManager 26/03/2014 15:48:09
1820 (0x071C)
The task sequence execution engine can not reboot the machine because we failed to persist execution environment
TSManager 26/03/2014 15:48:09
1820 (0x071C)
Fatal error is returned in check for reboot request of the action (Restart computer).
Unspecified error (Error: 80004005; Source: Windows)
TSManager 26/03/2014 15:48:09
1820 (0x071C)
An error (0x80004005) is encountered in execution of the task sequence
TSManager 26/03/2014 15:48:09
1820 (0x071C)
Task Sequence Engine failed! Code: 80004005
TSManager 26/03/2014 15:48:09
1820 (0x071C)
Any help you can give me would be great, as I'd like to get this process running properly.
Thanks,
Sarah

You don't mention what kind of OS this is (Windows 7 Pro x64?)
This is a known issue/FAQ.
I would recommending using MDT 2012 (update 1) for UEFI machines.
Machines with uEFI 2.3.1 only support Windows 8.x.
http://technet.microsoft.com/en-us/library/hh824898.aspx
Recomendation: Convert the BIOS to CSM and/or upgrade to Windows 8.1 :^)
Keith Garner - keithga.wordpress.com

Help me! "Could not complete the export command because of an application error"

Please, help me!
I've got the mistake "
"Could not complete the export command because of an application error" when I save for web in PS3 in win
thks so much,

You need to provide much more info about your system or else this is pointless.
Mylenium

Application error not catched

Hi,
we are calling an RFC synchronously from BPM. This is a standard BAPI, that does not have any RFC exception message (BAPI_IPAK_START and BAPI_ISREQUEST_GETSTATUS). We are only able to catch system errors, since no RFC exception message is avaiable for which we could define a different exception branch.
If an error happens in the RFC, an application error is thrown, which is not catched in the exception branch defined to handle the system error. After the application error, the process simply terminates- that's it.
Why is an application error not catched as system error? Is there any way to catch an application error and let the business process continue?
Your help will be rewarded,
Volker

Hi Volker,
a BAPI does not throw any exception, therefore you cannot catch any.
- You could write a wrapper RFC around the BAPI which interprets the RETURN structure and throws exception in case of an error.
- You could have a fork in the BPM depending of the entries in RETURN.
Regards
Stefan

WSYNCMGR.LOG Failed to Sync Update. Failed to Save Update.

I recently had to re-install WSUS on an SCCM 2012 SP1 server which had a problem where the EULA's were not being downloaded by WSUS for any updates which needed them. Even attempting to download the updates within the WSUS console generated an error
about being unable to locate the EULA file.
I re-installed WSUS with a fresh DB, which caused SCCM 2012 SP1 to immediately expire and remove the updates it had previously synchronised. This took a horrendous amount of time (at least 6 hours) for it to process all of the changes to the packages
and deployments etc.
This did resolve the issue within WSUS regarding approving EULA'd updates, but I am now unable to perform a software updates sync with the following errors being recorded in the wsyncmgr.log;
Synchronizing update 8e6513d8-dc3a-4468-8108-d44618a6e412 - Windows Malicious Software Removal Tool x64 - January 2008 (KB890830)
Referenced configuration items are not available yet: <MissingReferences><Reference RelationType="1" ModelName="Site_7A5EE138-E14B-4A6F-A5A5-8253002809FB/SUM_2fffa61e-964e-442a-81ad-d822f55d57d8"/><Reference RelationType="1"
ModelName="Site_7A5EE138-E14B-4A6F-A5A5-8253002809FB/SUM_852c74ff-b1b6-4c4a-8490-b0b1d7296d2a"/></MissingReferences>
Failed to sync update 8e6513d8-dc3a-4468-8108-d44618a6e412. Error: Failed to save update 8e6513d8-dc3a-4468-8108-d44618a6e412. CCISource error: 2. Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.UpdatesManager.UpdatesManagerClass.DefineUpdate
These same errors occur for many updates and cause the sync to fail due to consecutive failures.
It looks to me like this MAY be happening only for Expired/Superceded updates and/or updates for which Configuration Manager has previously synchronised. A handful of updates HAVE made it into the console, but only ones never before synchronised. I
have searched for and trawled several blog posts for similar errors but these all seem to relate to errors in the objreplmgr.log and child sites - which I do not see any errors in there and this issue is with my primary site. The primary site DOES however
have two child Secondary sites, so I am wondering if there is a data mismatch somewhere.
I tried replicating the issue in my lab environment and no matter what I did, even hitting some of the tables directly to upset it, I could not replicate the problem to begin to try solutions.
I am very close to having to open up a call with MS, but wondered if anyone had any ideas?
This does raise a few questions regarding DR scenarios too - as to how important IS the SUSDB, how best and when to back it up and if it is expected behavior for SCCM to wipe out it's configuration if it is sync'd with a fresh WSUS install?
My Personal Blog: http://madluka.wordpress.com

I just can't replicate this in my lab environment, and I am thinking that this is some sort of collateral damage done by the July patch applied by the customer that breaks SQL replication and also causes WSUS Sync issues. We didn't ever remove that
patch but instead implemented the SQL workarounds but this may just have resolved 'some' of the issues the patch caused. The annoying thing is that the day we implemented the workaround and proceeded to uninstall/reinstall WSUS and resync SCCM, Microsoft
released the updated version of the patch later that day (UK time) - wonderful timing.
My Personal Blog: http://madluka.wordpress.com

Whatsapp application error - failed to save audio note

Similar Messages

Maybe you are looking for