Whatsapp messages read by someone via iTunes? Is this possible?
Hi all,
My (ex)girlfriend is able to tell me the exact things I spoke about via Whatsapp. She even told me what pictures I shared with who. I heard something about synchronizing your Iphone with iTunes could enable someone (who knows your Apple ID password which I immediatly changed) to see your whatsapp messages/photo's.
Could someone verify this or does somebody have any other ideas why she is able to read my messages? In any event it has to do with iTunes...
(I am Dutch so there maybe some grammar mistakes, sorry)
Many thanks in advance!
G Gravenberch
Unless his phone is jailbroken, there is no known malware capable of infecting it and no known way of hacking it remotely. I'm not sure what "kik messenger" is... if that is some iPhone app that requires a third-party online account of some kind, it's possible that account could have been hacked.
Regardless of what is possible, though, you need to think very carefully about why a hacker would be at all interested in making his phone send this kind of personal information. Carefully consider the information being sent, and who it's being sent to. I'm guessing that there's no reason at all for a hacker to bother. Keep in mind that hackers these days are usually interested in either profit or activism, unless they're pranking/attacking a personal friend/enemy.
Similar Messages
-
My Iphone 4 crashed and I lost my entire contact list. I restored it to original factory settings but in trying to restore my data from my laptop via Itunes.. this was the feedback: Itunes could not restore the Iphone Dr Johnny Siu Chong because the Iphone refused the request.
I cannot get help from Apple support because i am being asked to supply the serial number which is stored on the phone and I cannot restore my data in the first place. I am reluctant to "Set up as a new Iphone" since I don't know whether if I do I may not then be able to access my data from Itunes...
Please advise what to do. I did not see any tutorials on Youtube to help me with this.
I look forward to an early response.Hey joshuafromisr,
If you resintall iTunes, it should fix the issue. The following document will go over how to remove iTunes fully and then reinstall. Depending on what version of Windows you're running you'll either follow the directions here:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
http://support.apple.com/kb/HT1925
or here:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Best,
David -
I need to retrieve a series of very old (more than 1 year old) text messages from my iPhone 4S. Is this possible?
If the text is still on the phone and wasn't deleted, I don't see why not. Probably easiest to use an app like TouchCopy (Mac and PC) or PhoneView (Mac), rather than looking through things on the phone itself.
-
Cannot sync, error message reads" not enough access privileges for this operation
When trying to sync my ipad and iphone with my PC i get this error message "Cannot be sybced. You do not have enough access privileges for this operation". I have a new PC but i have successfully synced these devices before. can anybody please help ?
Just thought I'd put out an update on my problem. It has been solved. I spoke to a tech at Apple at 1-800-275-2279. She had me try a few things that didn't help. Her last suggestion was to uninstall QuickTime and iTunes then reload. She sent me the uninstall instructions at http://www.info.apple.com/kbnum/n93698 which I followed. When speaking to her I told her I was afraid to do this because I saw other people on the discussion board who tried this and lost all of their music. She assured me that that wouldn't happen. I did the uninstall then the install. (Just a note here, I also read on the message board that someone said that to cure this problem you should do the install then open up QuickTime before opening iTunes. I did this also but don't really know if it made a difference.
Bottom line is I uninstalled QuickTime and itunes per the instructions at the site shown above. I then installed both again from www.apple.com/itunes/download. After the download I ran the install and unchecked the box to let itunes start after the install. I then opened Quicktime then closed it. I then opened iTunes and all of my music was there and I didn't get the anoying "iTunes is not set as the default player" and the error after trying to set it. The problem described in my first posting of copying CD's is also gone. So beleive it or not, EVERYTHING is working just like it should. Some of the above steps might not be required but I would follow them step by step because I know they worked for me. -
How can I import music into iTunes from another media.
I have a library downloaded from a Sony Ericsson W715 into "Media Go" and I want to transfer to iTunes and then into my iPhone 4.
Is this possible ?
Chris
<Email Edited by Host>chrisfromgoodworth clatford wrote:
How can I import music into iTunes from another media.
I have a library downloaded from a Sony Ericsson W715 into "Media Go" and I want to transfer to iTunes and then into my iPhone 4.
Is this possible ?
Chris
Possibly. Media Go supports a variety of music formats, some of which can be imported in to iTunes and then synced on to an iPhone, however some of its formats cannot be imported in to iTunes.
See http://mediago.sony.com/enu/supported-file-formats/ for a list of formats supported by Media Go. iTunes for Windows supports MP3, AAC, WAV, and can import and convert WMA files as well. However iTunes does not support ATRAC, or FLAC.
Furthermore, if some of your music has been bought from an Internet music store it might be procted by DRM. If so it cannot be imported in to iTunes.
To do the importing you would either drag the music files in to iTunes, or tell iTunes to open them. See http://support.apple.com/kb/ht1347 -
Following steps in support.apple. iTunes was uninstalled with no problem, This was 2nd step and 2nd error was "fatal error during installation" I left everything as it appeared and no further steps were taken. I saw instructions for other OS "fixes" to these error messages, but not XP. Am aware it is no longer supported, but, my desktop is not designed for any OS but XP. Was uninstalling to fix a problem logging to my account within iTunes, and, was getting error "no connection to internet" Diagnosed it and found the secure server was rejecting my log in attempts, but internet connection was fine. Have Avast and Malwarebytes apps and, after running two sessions each, found Trojans which were quarantined. Rebooted and still getting same error. Uninstalling was last resort.
Help! If I hadn't already uninstalled iTunes, I would let it go since I could still access my music and other media. My iPod and iPhone would have just had to survive without the ability to sign in to my account, but, I needed to update my address to use my debit card for a storage upgrade and it was rejected because I just moved and the account needed to be corrected to reflect the changeFor general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) (not for XP) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2 -
After downloading ,completing the lic agreement phase, the next step is where to install and automatically' MAC HD with 904 gb available this disk is used for time machine backups' is shown and installation is blocked .
Any body got any idea what to do next ?Time machine needs its own partition to operate. So you are not going install a OSx Lion on that volume.
If there is enough room you may be able to partition the drive on the fly with DiskUtility
Are you saying you clean installed Lion and you are trying to move your user Data over with TM via the migration Assistant? Please explain. -
TS1702 my apps won't update errors message reads "could not be downloaded at this time
I been having this problem for a week now
Sprint store told me they r having a problem with this apple is trying to fix. They said you can connect to wi-fi to download your apps, you might have to sign out of your apple I'd and resign in. Hope this helps
-
Can someone try and reproduce this possible bug with DBMS_JOB.run
11.2.0.2 EE
OEL5
getting an IO dump from what looks like entire shared pool. A call to a procedure using dbms_job.run shows the dump in the plan.
Be interested to see if anyone is on 11.2.0.3 on OEL can reproduce. thanks.
sqlplus / as sysdba
SQL*Plus: Release 11.2.0.2.0 Production on Tue Jan 8 16:44:33 2013
Copyright (c) 1982, 2010, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning and Automatic Storage Management options
SQL>
SQL> ALTER Sesssion SET EVENTS '10046 trace name context forever, level 12';
System altered.
/* create a small proc that takes in a var and does nothing except set a variable */
SQL>
SQL> create procedure io_test ( v_in number)
2 IS
3 v_variable varchar2(10);
4 begin
5 null;
6 END;
7
8
Procedure created.
/* flush the shared pool to simulate a start */
SQL> alter system flush shared_pool;
System altered.
/* set our tracefile id */
SQL> alter session set tracefile_identifier=err_test;
Session altered.
/* call the proc from a dbms_job submission */
SQL> declare
2 v_job_no number;
3 begin
4 Dbms_Job.SUBMIT ( job => v_job_no
5 , what => 'sys.io_test(' || 1234 || ');');
6 Dbms_Job.RUN (v_job_no);
7 end;
8 /
PL/SQL procedure successfully completed.
SQL> tkprof the trace file, go to non-recursive statements at the bottom and we see following
OVERALL TOTALS FOR ALL NON-RECURSIVE STATEMENTS
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.04 0.04 4294967293 4294963226 4294967122 1
Fetch 0 0.00 0.00 0 0 0 0
total 2 0.04 0.04 4294967293 4294963226 4294967122 1
some behaviour notes.
1. If I call the proc directly, I dont see the huge IO, its only dbms_job.run that does it.
2. If I call the dbms_job.run a second time I dont see it, its only when I flush the shared pool which simulates the first time I could be calling the proc which is how I found it initially
3. If I call the dbms_job.run outside of a proc I do see it.
4. Watch your IO and CPU if you generate it. Huge spike to coincide with the figures in the trace.
5. 4294967293 is very close 2^32, is also the size of my shared pool so looks like entire pool is being dumped.
6. Have reproduced on 3 instances on 3 separate servers. all same version 11.2.0.2.0 and patch level which is 2012 Q2.
7. change the proc to have the variable commented out and we dont see the dump.
8. I have a call open with support a while now but havent been able to reproduce on their side. Interested to see if someone has OEL 5, 11.2.0.2 instance, can generate it and also an 11.2.0.3 instance and can show its not in that.
thanks.961469 wrote:
rjamya wrote:
I am suspecting this is a tkprof issue, analyzing the same trace file via orasrp doesnt show this behavior. Also the high physical reads shown are missing in the raw trace file.Im not so sure, I can see it in the raw trace file.
do you see it in raw trace file? if so can you post the STAT line showing high disk read (pr=nnnnnnnn) values ? I dont see it in the trace file that i generated.
Raj -
when I hook up ipod up to to itunes it reads: IP F There is a problem with this drive. scan the drive now and fix it. When I do this, nothing happens.
Hello,
I found the same issue. I have an iPod Classic 160 GB (Black) bought in April 2013. I'm using a Windows 8 Laptop bought in August 2014.
This is my account of this problem and why I think customers should just ignore the pop-up, but Apple (and possibly with Microsoft/Windows) should look at the issue.
Recently (approximately from early February 2015), when I connect the iPod to my computer I get a message saying there is a problem with the drive and it needs to be scanned and fixed. In full the message reads:
There's a problem with this drive. Scan the drive now and fix it.
This message appears very shortly and then immediately (once the message disappears, is clicked on, or x-d) brings up Windows File Explorer on the drive and its containing visible folders: which tells me nothing (though it can clearly open it and look at the files not locked to iTunes)
Other than this, the iPod seems to connect properly and work fine. iTunes (ver: 12.1.0.71 64bit) seems to find no issue. The iPod runs fine, it syncs properly (all of my music and podcasts). It responds as it always has and works for hours.
I did some troubleshooting: first on the wire, trying all ports and using an alternative, then on my laptop (all usb ports with other connectors and device drivers) and some basic testing of the iPod and iTunes. All of these seemed fine to me, no issue whatsoever other than the message every time I connect the iPod. So I just ignored it for a while.
Anyway, eventually I got curious (and had some more free time to look at it) and let Windows 8 do what it wanted (scan and fix the drive). Clearly the iPod works fine, and I have nothing important on it that isn't on my computer, so at worst Windows will break the software and I'd have to reformat the drive through iTunes (and Restore to Factory Settings) which I feel fine doing. I also took note of all of my settings on the iPod (like EQ, and the way I laid out the menus etc...) so I can redo those from defaults.
Prior to doing this, the iPod was version 2.0.5 (the latest version).
When I set the drive to be scanned, windows told me it identified the problem and would fix it. I don't remember the exact wording, as this message was immediately obscured by a pop-up telling me the drive was in use and software using it should be closed. So I closed iTunes which in turn caused the pop-up and message to disappear.
Windows then said it had succeeded and brought up the File Explorer of the drive again (now with some folders missing). When I loaded iTunes back up, it told me there was a problem with the iPod and it would need to be restored. Ejecting the iPod showed that it seemed to believe it had no content on it.
So I restored the iPod through iTunes, downloading the latest iPod update again and started syncing the iPod. After adding a couple songs, I ejected it and played them - they worked fine, the menus had returned to defaults but I quickly changed them to how I liked and overall the iPod is back to how it was. I've now set it to sync the remaining thousands of songs (and couple hundred podcasts). Edit - by the end of this post, this has finished copying Music, Podcasts, and Playlists. It's back to exactly how it was before.
Annoyingly, this has not removed the pop-up message when I connect the iPod, still the same as before - the most irksome thing being the file window opening every time i connect the iPod, though this is still minor (I just have to remember that this will happen and manually close it each time).
So I'm at a loss on the cause, and am going to return to ignore it. I'd greatly appreciate if Apple could look into this. I'm wondering if it is a recent update to iTunes or to Windows, but I don't trust that I won't be able to undo changes if I myself began looking through them (and I lack the time and expertise to do that effectively). I think there might be that Windows is detecting something in the way that Apple formats their iPod drives that it believes is an issue (even when it isn't). My guess is the way of formatting is unchanged (the iPod hadn't received an update recently to suggest and alteration to this) but maybe the things Windows is looking for may have slightly changed and disagrees with Apple's way of keeping the iPod Drive proprietary to iTunes.
TL,DR: Advice to others (and Ljchicago) searching this topic is to ignore the message for now.
Thanks,
Dixavd -
Different account, but same iTunes, is it possible ?
Hi,
I want to create another account for my girlfriend, I know how to do it and everything works fine. But I also want to share the music I have on iTunes with her account. So we want two separate account with the same iTunes, is this possible ? I'm pretty sure I'm not the only one having this problem, I hope someone can find something for me.
Thankshttp://support.apple.com/kb/HT1203
-
Cannot connect to itunes at this time
my phone will connect to itunes the app store is phone but i get a message of "cannot connect to itunes at this time"
my phone will NOT connect to itunes
app store works fine -
Hi guys!
I really need help. I tried to back up the data on my iphone 4 on the iTunes version 11.01 but failed.
The error message read : the backup was corrupt or not compatible with iPhone. can anyone advise me on this,
as I urgently need to back up my phone in anticipation for my iPhone 5.
Greatly appreciated!this usally happens when the backup you tool was from an old ios version. Two options that you can try is
1. Delete the back up by going to edit> preferences> devices & delete back up on itunes & try backing up again
2. Update the ios software of the iphone4 & then take a back up. then try restoring
Taz -
I recently deleted two albums off of my phone using itunes, but when i went back onto my phone, they were still there and playable. they are not songs that I have purchased via itunes so can someone please help me figure out what is wrong so that i can fix the problem
Hi, Abril_Perez17.
This may be related to a new feature embedded in iOS7 that shows all purchased music by default. Go to Settings > Music, then turn off Show All Music. See if the issue ceases once the feature has been disabled. This information is located on page 63 of the user guide below.
iPhone User Guide
Regards,
Jason H. -
I have an ipad 2 on ops 4.3 and have just updated to 7.1 via itunes. I backed up first and have synced repeatedly but keep getting a message on my ipdad screen that the ipad is not set up - I chose the set up option restore from itunes back up
To free up hard drive space the best bet is to move data files that you don't need access to all the time. Likely candidates are music, video, and photos. Things like word processing and spreadsheet files can also be moved but they tend not to be very large and so don't free up much space. The problem with moving the above mentioned files is that iTunes and iPhoto need to know where the files are stored.
Here's an article explaining how to move the iTunes folder. You can move the iPhoto library using the Finder but there is a slight complication. Start iPhoto, open the Preferences and click on the Advanced tab. The first option is "Copy items to the iPhoto Library". If this option is checked, copy the iPhoto library to your external folder (drag it from the Pictures folder to your external drive) and then delete it from your Picture folder. If this option is not checked, it is a bit more complicated and we'll need to talk a bit.
Maybe you are looking for
-
How to use bind variable value of one VO as initial value for other VO row?
JDeveloper 10.1.3.3, ADF Faces, ADF BC Hi, I have two View Objects: one read only with several bound variables and another editable entity based. Correspondingly there are two ADF Faces pages: first contains search form based on the read-only VO and
-
Terms of Payment consideration in Price comparision of Quotations
Hi, While Price comparision of the Quotations submitted by vendor, can I take the Payment terms into consideration? If so how? I have given the terms of payment in the quotations but it is showing as an additional information only in price comparisio
-
Can we run one report from another Report in reports 6i
Actually my requirement is i want to run 4 reports from another report(driver report) by passing parameter same as the driver report. i want to see the out put on the screen report by report next to driver report output.is it possible?? actually i go
-
Plugin to transfert photo from Mail to iPhoto?
Hi, My mother is using 10.3 Mail and iPhoto 5 (ithink, not sure of the version!). She received many times photos in Mail. She would like a simple way to move pintures from Mail attachement to iPhoto. 10.4 includes a feature like this. I'd like to kno
-
My thread doesn't entry in my constructor
I had make an application that runs well in my computer. But when I installed it in another computer the execution stop when arrives to a constuctor the execution stops. What happen? what happen? !!!!