Whatsapp not connecting via HH5

I am using whatsapp on my iPhone.
The app works perfectly via 3G but as soon as I switch to wifi via the HH5 I cannot connect.
I have searched the forums and I have separated the 2/5ghz with different settings as suggested and renamed the two networks (tried whatsapp on both no luck) and manually changed the channel from auto.
I have also turned off smart setup (can't see the point of this function)
I can't think of anything else unless the parental settings are kicking in but the whatsapp website is unblocked, not only that I do not believe that the chat is over http so this should not effect the connection.
Does anyone have any ideas how to solve it?
Thanks in advance
Ickle

Did you already try to clear the app from the multitask bar and start it again?
If this does not work, try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose data doing a reset.

Similar Messages

  • TS3048 My early 2009 Mac Pro does not connect via bluetooth to my sound bar or bluetooth mini speakers. Both my wireless keyboard and mouse have no problems connecting. What do I need to do to connect to external bluetooth devices?

    My early 2009 Mac Pro does not connect via bluetooth to my sound bar or bluetooth mini speakers. Both my wireless keyboard and mouse have no problems connecting. What do I need to do to connect to external bluetooth devices?

    I would always have a wired keyboard and mouse on hand (need not be expensive ... any cheap wired devices will work).  "Emergency recovery" procedures can activate features in random order, so the opportunity to select a recovery partition may pass before the wireless devices are recognized.
    That will let you select the "turn on Bluetooth" icon.

  • Cannot pair iPhone4 (iOS 7.1) with Macbook air (iOS 10 yosemite); they do see each other but will not connect via bluetooth

    cannot pair iPhone4 (iOS 7.1) with Macbook air (iOS 10 yosemite); they do see each other but will not connect via bluetooth

    That is because they do not generally pair. What is it that you are trying to do by connecting them via Bluetooth? If you are referring to AirDrop or continuity, then all you need to do is have Bluetooth turned on, they do not pair.

  • Reset ipod now will not connect via wifi

    reset ipod now will not connect via wifi

    Try:
    - Restting the iPod (you may have done this)
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    - Resetting network settings: Settings:General>Reset>Reset Network Settings
    - The troubleshooting here:
    iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections

  • HT1338 hp 100 office jet printer will not connect via bluetooth to my mac pro running os 10.9

    I once was able to connect via blue tooth to my HP mobile office jet printer with my Mac pro. but ever since i have upgraded to OS 10.9 it will not pair with my laptop. I have gone too the HP site and downloaded the current drivers for this printer as well as check apple updates. it still will not connect via bluetooth

    System Preferences>Fax & Scan. Delete the printers and re-add them back in.

  • HP Officejet Pro 8500A 910A, Vista 32-bit, will not connect via usb to my PC!!!

    I used to have this all in one connected to my pc, until I was experiencing a few printing issues, so I decided to uninstall it!  When I tried to reinstall it, the pc will not connect it.  I have tried different ports and have replaced the cable, also downloaded the latest software and drivers all to  no avail.  I can connect wirelessly to my laptop, but unfortunately this isn't a solution for my desktop as it's not wireless, therefore it has to be connected via usb.  At my wits end, please help me!!!!!
    This question was solved.
    View Solution.

    Hello,
    Can you try inserting a flash drive into one of the USB ports in the printer, to make sure it reads it?
    The port on the printer might be what's giving you the issue. Also, can you try connecting the printer USB to a different PC?
    Let me know the outcome.

  • My iPad is Disabled and I cannot input my passcode.  how do i do that?  I have tried to connect to iTunes and it will not connect via computer connection as I cannot activate my iPad with the pass code.  what do i do?

    My iPad is disabled and I can not input my passcode.  what do i need to do?  I tried to connect to iTunes, but it will not allow me to connect via compute USB as I cannot input my passcode for the iPad. 

    You may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPad and restore/re-sync your content to it

  • Whatsapp not connecting after the uptdate

    I have updated my WhatsApp to the latest version 2.11.298 yesterday. It worked fine yesterday and today its status showing "not connected". Its not the problem with mobile network as i can connect all other apps to internet and browse through the internet. Please find me a solution!!

    have you tried re-installing WhatsApp, otherwise if that doesn't work, you will need to contact WhatsApp directly and notify them of the problem.

  • MacBook Pro 15" Not Connecting via WPA-Enterprise

    My company just added an WPA-Enterprise based wireless router, I can connect to it fine with my iPad/iPhone, I've also connected an Android device and Windows XP & Windows 7 computers to it with no issues (the Windows boxes belong to other users on the network), but I can't seem to connect my Mac to it. It asks for credentials (like a WPA-Enterprise connection should), but then it doesn't seem to hand-off the credentials properly. Since this network is in it's early life at my company (and because my MBP is an unsupported platform), I'm not getting much help from the office (don't gripe, it's the way it is). Any ideas as to why I can't connect via my MBP when it's so easy to connect via all my other platforms?

    My company just added an WPA-Enterprise based wireless router, I can connect to it fine with my iPad/iPhone, I've also connected an Android device and Windows XP & Windows 7 computers to it with no issues (the Windows boxes belong to other users on the network), but I can't seem to connect my Mac to it. It asks for credentials (like a WPA-Enterprise connection should), but then it doesn't seem to hand-off the credentials properly. Since this network is in it's early life at my company (and because my MBP is an unsupported platform), I'm not getting much help from the office (don't gripe, it's the way it is). Any ideas as to why I can't connect via my MBP when it's so easy to connect via all my other platforms?

  • 6303i classic not connectes via USB

    My new 6303i will not connect to the PC via USB. Is there a special driver for my WIN7 installation? OVI Suite is installed.
    What else can I do?
    Regards for help.
    Helmut - Germany
    PS Screen says No connection possible

    You are correct, charging is using the charging port and also using a USB cable. It is strange that the accesories page for the 6720 only lists chargers that plug ionto the charging port. See link below.
    http://europe.nokia.com/find-products/accessories/all-accessories/power
    Maybe someone with a 6720 can confirm this.
    I just checked the phone spec here and it only says "2mm charger connector". It normally says "usb charging" if usb charging is possible.
    Message Edited by cjlim on 06-Nov-2009 09:50 AM

  • 6822 and PC Suite 6.84 Will not connect via Blueto...

    I have just downloaded PC Suite to connect to my Nokia 6822, having reloaded the O/S on my laptop.
    Phone 6822
    O/S Windows XP Pro SP2
    PC Suite 6.84.10.3
    Bluetooth Stack WIDCOMM 3.0.1.905
    The phone shows as being paired (padlock symbol) but still requires pairing. Put in a new passkey and verify ut on the phone, the phone connects but the connection wizard does not move on, it locks up.
    Cannot get pcsuite to connect top the phone at all
    Help

    I really could not get more frustrated with Nokia than I am at the moment.
    Firstly I have been trying to login and/or register a new account so I can post here for almost 24 hours. The web site returning 404-not found or simply a blank page not only from my computers at home but a couple at work too.
    This really is not good enough. There isn't even a contact point for the webmaster that I could find to warn of these failures.
    Back to the plot. . .
    I have paired with WIDCOMM on both the version of PC Suite that came with the phone (a 6822) and the latest download-able version doing complete uninstalls between of all Nokia components using uninstall and add/remove programs.
    Both version ask me to pair with the phone (the later one asks me to pair even though it shows the phone with the padlock symbol next to it in the list, indicating it is already paired). The phone connects and then within seconds disconnects.
    Connection via infrared works fine but this is not what I want to do for many reasons.

  • Whatsapp not connecting

    whatsapp loading but not connecting to the internet even though wifi/3G are availablea

    Did you already try to clear the app from the multitask bar and start it again?
    If this does not work, try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose data doing a reset.

  • "not connected via PPPoE"? why, it was fine before!

    Got up this moning and couldn't connect to the net.
    My airport icon showed a scrolling message "cannot connect over PPPoE". Last night everything was fine, I think I even left everything connected over night.
    I've been in touch with my ISP but they say the problem isn't with them. After much messing around, I've lost my old network name, a new one has been created, the icon shows good reception, the scrolling message has disappeared and I appear to be connected but...when I go to Internet Connect it gives me the message of "not connected"
    Ironically, I'm currently connected to the Net via someone else in the building - their Newtprk shows up and works on my mac, but mine doesn't!
    What's my next step?

    The first step is usually to pull the Airport Express and modem from power, waiting a few minutes, then plugging the modem back into power, waiting a minute, then plugging the Airport Express back into power.
    If the Airport Admin Utility tells you the firmware version on your Airport Express is 6.2, I also suggest you install the more stable version 6.1.1 from:
    http://www.apple.com/support/downloads/airportexpressfirmware611formacosx.html

  • Help!  My new iphone 5 will not connect via bluetooth to my bose speaker.  It was working just fine with my old iphone 4 and now nothing.

    Hello, I just purchased the iphone 5 and wanted to use my bose speaker which connects via blue tooth.  Well, it will not work.  It was working fine with my iphone 4 and now it will not pick up a signal.  Help!!!

    Howdy Adrianatolman,
    The following article details a number of steps that can help sort out issues with Bluetooth accessories.
    iOS: Third-party Bluetooth headsets, headphones, and keyboards
    http://support.apple.com/kb/HT1664
    Cheers,
    Allen

  • I can not connect via SSH to a MacBook (the internal home network)

    Hi all! There is an internal home network of three computers and Wi-Fi router. On the router and the computers with Win7 via SSH I go (with a MacBook) without problems, but on a MacBook with any other computer can not enter via SSH. What could be wrong?

    ssh -v -v -v [email protected]
    Do this once for a working system,
    And once for a broken system.
    Compare the output and see what is says where the broken system changes radically from the working system.
    Also on the destination system look in the /var/log/secure.log file for sshd entries to see if the destination system is rejecting your connection and for what reason.
    It is possible on the destination system to get even more information by changing the /etc/sshd_config file entry
    #LogLevel INFO
    to
    LogLevel DEBUG3
    then issue the command
    sudo kill -HUP  `/var/run/sshd.pid`  # reload sshd configuration parameters

Maybe you are looking for

  • Either there is no default mail client or the current client..

    Is there a fix for the error message (either there is no default mail client or the current mail client cannot fulfill the message request. Please run Microsoft Outlook and set is as your default mail client) when trying to open a PDF file?. This err

  • Noise when scrolling!

    Trackpad, mouse, tablet, don't matter. Quiet but annoying buzzing sound, but not every time, when scrolling pages in safari or firefox. Brand new Macbook Pro 2.5 Any thoughts, suggestions?

  • How to add join conditions in ABAP Query.

    Hi, I need a help on "ABAP Query". How to add join conditions in ABAP Query. Thanks in advance. Thanks & Regards, Ramana

  • Disk Repairs Please Help!

    I know there are many posts about this problem, but none of them have seemed to help me out.  My Imac runs fast and fine, but when i pull up safari pages take unusually long to load and sometimes dont completely load without saying something like "23

  • Script Alert SyntaxError: Expected: }:1

    While trying to run the Adobe Watermark Palette, I receive the syntax error as stated in the subject of this posting. I removed the Watermark Palette using Adobe Extension Manager and reinstalled it. I receive the same error. I've  double and triple