WhatsApp on E72 consuming a lot of RAM

I have observed that WhatsApp consumes a lot of RAM on my E72. So much so that I can't even use Maps or browse heavy pages. To free up the RAM, I need to switch it off but even though I exit the program, it still is running in back ground and consuming the RAM.
Is there any way that I can close this program ? Currently I am using NetQin to close it but its a very lengthy process.
Also if any of you are using an equally good program kindly inform so that I can switch over.
Using Nokia Lumia 1320.
Also have Nokia E72 & Nokia N8.

anyone with appropriate response?!!
Using Nokia Lumia 1320.
Also have Nokia E72 & Nokia N8.

Similar Messages

  • Why Firefox Has Spikes In CPU Usage And Consumes A Lot Of RAM Since Security Update?

    After applying security update 3.6.18 i started having this problem. I had this problem earlier but it only happened after several days Firefox was opened constantly. Now i have this problem several hours later after launching Firefox.
    [http://i.stack.imgur.com/PJmH5.png '''Here is a picture of high RAM usage''']
    '''[http://i.stack.imgur.com/tjsqt.png Here is a picture of high RAM and CPU usage]'''
    I have Flash disabled.
    What is going on? Should i reinstall Firefox 3.6.18?

    Have you any particular reason for using an older version of Firefox.
    Whilst I rarely use firefox 3.6 now, and do not know the answer I will comment that the now unsupported firefox 4 did have bad memory problems in some cases. Some of those problems were addressed in firefox 5, and others are addressed in Firefox 7, which is due out on the Aurora channel next week.
    You could consider upgrading to a newer version of firefox. If you need firefox3.6 only for limited use you could consider using Firefox portable, alongside a newer version of Firefox.
    * portable: http://portableapps.com/apps/internet/firefox_portable/localization#legacy36
    * see also
    **[[installing a previous version of firefox]]
    **[[high memory usage]]
    **[[firefox consumes a lot of CPU resources]]

  • Why Firefox 5.0 Still Consumes A Lot Of RAM?

    Contrary to many statements that Firefox 5.0 is RAM optimized and uses less, i still have Firefox eating '''[http://i.stack.imgur.com/i1AgT.png almost ~800MB of RAM and mapping more]'''.
    I used command:
    ''about:memory''
    And was presented with a modules/extension tree and i don't understand what each means. Does anybody here have experience or knowledge about this here who could tell me where may be the problem?

    Have you any particular reason for using an older version of Firefox.
    Whilst I rarely use firefox 3.6 now, and do not know the answer I will comment that the now unsupported firefox 4 did have bad memory problems in some cases. Some of those problems were addressed in firefox 5, and others are addressed in Firefox 7, which is due out on the Aurora channel next week.
    You could consider upgrading to a newer version of firefox. If you need firefox3.6 only for limited use you could consider using Firefox portable, alongside a newer version of Firefox.
    * portable: http://portableapps.com/apps/internet/firefox_portable/localization#legacy36
    * see also
    **[[installing a previous version of firefox]]
    **[[high memory usage]]
    **[[firefox consumes a lot of CPU resources]]

  • WmiPrvSE.exe Consuming A Lot of RAM on 2012R2 DCs with SCOM Agent

    Good afternoon,
    I have three Windows Server 2012 R2 Domain controllers (AD DS, DNS, and DFS roles) and I'm running SCOM 2012 R2 Update Rollup 1 with all the latest management packs for Server 2012 R2, Active Directory, DNS, and DFS.
    When I install SCOM agents on these DCs, a WmiPrvSE process starts consuming a lot of memory until it reaches around 512MB.  At that point no one can RDP to the DCs, but we can enter-possession to get-process | sort ws and kill the offending WmiPrvSE.exe
    process.  When I uninstall the SCOM agent the server returns to normal.
    Other Windows Server 2012 R2 servers in our environment don't have this problem.  And when we had Windows Server 2012 (no R2) domain controllers this wasn't an issue.  My assumption is one of the management packs are an issue.
    I've seen other posts, but they are either related to older versions of Windows Server or not domain controllers.
    These are all the features I have installed on the DCs:
    Active Directory Domain Services                                                                                                                                                             
    DNS Server                                                                                                                                                                                   
    File and Storage Services                                                                                                                                                                    
    File and iSCSI Services                                                                                                                                                                      
    File Server                                                                                                                                                                                  
    DFS Namespaces                                                                                                                                                                               
    DFS Replication                                                                                                                                                                              
    File Server Resource Manager                                                                                                                                                                 
    Storage Services                                                                                                                                                                             
    .NET Framework 3.5 Features                                                                                                                                                                  
    .NET Framework 3.5 (includes .NET 2.0 and 3.0)                                                                                                                                               
    .NET Framework 4.5 Features                                                                                                                                                                  
    .NET Framework 4.5                                                                                                                                                                           
    WCF Services                                                                                                                                                                                 
    TCP Port Sharing                                                                                                                                                                             
    Group Policy Management                                                                                                                                                                      
    Remote Differential Compression                                                                                                                                                              
    Remote Server Administration Tools                                                                                                                                                           
    Role Administration Tools                                                                                                                                                                    
    AD DS and AD LDS Tools                                                                                                                                                                       
    Active Directory module for Windows PowerShell                                                                                                                                               
    AD DS Tools                                                                                                                                                                                  
    Active Directory Administrative Center                                                                                                                                                       
    AD DS Snap-Ins and Command-Line Tools                                                                                                                                                        
    DNS Server Tools                                                                                                                                                                             
    File Services Tools                                                                                                                                                                          
    DFS Management Tools                                                                                                                                                                         
    File Server Resource Manager Tools                                                                                                                                                           
    SMB 1.0/CIFS File Sharing Support                                                                                                                                                            
    User Interfaces and Infrastructure                                                                                                                                                           
    Graphical Management Tools and Infrastructure                                                                                                                                                
    Server Graphical Shell                                                                                                                                                                       
    Windows PowerShell                                                                                                                                                                           
    Windows PowerShell 4.0                                                                                                                                                                       
    Windows PowerShell 2.0 Engine                                                                                                                                                                
    Windows PowerShell ISE                                                                                                                                                                       
    Windows Server Backup                                                                                                                                                                        
    WoW64 Support       

    I have ever seen somebody has similar problem when import DNS MP to DC. Check whether it is this situation.
    Otherwise, Open Event Viewer to see if there are any useful info there.
    Last, apply the Hotfix below.
    http://support.microsoft.com/kb/2919355
    Juke Chou
    TechNet Community Support

  • PS CS4 consumes a lot more RAM than CS3

    I recently updated from Photoshop CS3 to Photoshop CS4 and now I have the problem that CS4 is consuming very much RAM.
    When I open the same image on both versions CS4 consumes like four times as much RAM as CS3 does.
    Settings are identical on both versions, so I don't quite know how this can be.

    TheARchitect2009 wrote:
    As an example: In idle, without any file loaded, CS3 uses around 90MB while CS4 uses 380MB.
    I don't run CS4 on Windows (just CS3) so I can't say whether is this normal behavior. That sadly may be simple application bloat. I was also shocked to see Vista using 1 GB of RAM when idle and without running apps.
    Make sure your RAM allocation and history state settings are consistent between the versions.

  • Photoshop CS5 consumes a lot of RAM

    Hi,
    While using Adobe Photoshop CS5, I am suffering of RAM loss, it consumes around 2.5 GB of my RAM, while Adobe Illustrator CS5 consumes around 500 MB of RAM.
    Is this normal or I have to do something to minimize memory usage with Photoshop?

    By default, Photoshop uses 70% of available RAM. The more RAM available to Photoshop, the faster Photoshop can process image information.
    You can adjust here:
    Choose Photoshop > Preferences > Performance...adjust in 5% increments...restart Photoshop after each change.
    You really should Max out your computer, if you want the best performance, before messing with Photoshop.

  • Oracle 10g consumes a lot of ram

    hello everyone,
    i'm a newbie to oracle,
    can someone solve my problem
    when oracle database is running , i can't run any other applications (on windows)
    task manager shows around 100 mb memory usage for oracle
    is there any solution to this problem...

    one solution can be:
    -add more memory to your XP Pro: 2GB and more
    -install a blank Virtual Machine [vmware.com] on your XP as a host
    -on the Virtual Machine install the guest OS: say Win Server 2003 [u can get it free from MSoft site], configure the Virtual Server as Active Directory, DNS, Server, DHCP Server. Use Static IP for the server.
    -install Oracle 10g on the Virtual server
    I did the same on my XP Pro system and Oracle 10g EE runs OK on it. My CPU is 2 GHz.

  • SQL Developer consumes a lot of memory

    Sql developer consumes a lot of RAM (around 100 MB) few minutes after start of application . any tips to reduce this?

    This is usually due to the caching of database objects on support of code insight and is dependent on the number of objects in the database. As documented in the readme.txt in the sqldeveloper home directory, you can disable code insight.
    2.1  To disable Code Insight
    Run SQL Developer from a command line using the following statement:
       Windows : sqldeveloper -J-Dsdev.insight=false
       Linux or Mac: Run sh sqldeveloper -J-Dsdev.insight=false
    or edit sqldeveloper.conf and add "AddVMOption -J-Dsdev.insight=false"

  • Early 2013 13" MacBook Pro runs slow and uses a lot of RAM, why and what can be done?

    Problem description:
    My computer is using a lot of RAM. Wondering if there’s a hardware issue, or a software issue, or something else. I currently have no programs open in the Doc, besides EntreCheck. and the RAM is showing about 75% used. I’m looking for suggestions on what I can do to speed it up and make it more functional, and efficient for doing design work. I recently upgraded from the original 4GB RAM (2x2GB), and from the original HD to a 512 GB SSD drive, and upgraded to Yosemite. Perhaps that was too much for this machine? Please help with anything that I can do to make it better! Thanks in advance!
    I have a recent back-up, I'm open to saving user files and starting from scratch with the current hardware, etc... but would need some direction on how to do this. I did upgrade myself using Apple provided instructions.
    Here are the EntreCheck results:
    EtreCheck version: 2.0.11 (98)
    Report generated December 2, 2014 at 12:45:57 PM EST
    Hardware Information: ℹ️
        MacBook Pro (13-inch, Early 2011) (Verified)
        MacBook Pro - model: MacBookPro8,1
        1 2.3 GHz Intel Core i5 CPU: 2-core
        8 GB RAM Upgradeable
            BANK 0/DIMM0
                4 GB DDR3 1333 MHz ok
            BANK 1/DIMM0
                4 GB DDR3 1333 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
        Intel HD Graphics 3000 - VRAM: 512 MB
            Color LCD 1280 x 800
    System Software: ℹ️
        OS X 10.10.1 (14B25) - Uptime: 2 days 0:17:23
    Disk Information: ℹ️
        Crucial_CT512MX100SSD1 disk0 : (512.11 GB)
        S.M.A.R.T. Status: Verified
            EFI (disk0s1) <not mounted> : 210 MB
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
            SuperCool (disk1) /  [Startup]: 510.88 GB (320.22 GB free)
                Core Storage: disk0s2 511.25 GB Online
        MATSHITADVD-R   UJ-898 
    USB Information: ℹ️
        Microsoft Microsoft® Nano Transceiver v2.0
        Apple Inc. Apple Internal Keyboard / Trackpad
        Apple Inc. BRCM2070 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Inc. FaceTime HD Camera (Built-in)
        Western Digital My Passport 070B 319.37 GB
            S.M.A.R.T. Status: Verified
            EFI (disk2s1) <not mounted> : 210 MB
            NATURE2020 (disk2s2) /Volumes/NATURE2020 : 319.03 GB (169.27 GB free)
        Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Problem System Launch Agents: ℹ️
        [failed]    com.apple.security.cloudkeychainproxy.plist
    Problem System Launch Daemons: ℹ️
        [failed]    com.apple.ctkd.plist
        [failed]    com.apple.icloud.findmydeviced.plist
        [failed]    com.apple.nehelper.plist
        [failed]    com.apple.nsurlsessiond.plist
        [failed]    com.apple.wdhelper.plist
    Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist Support
        [running]    com.adobe.AdobeCreativeCloud.plist Support
        [loaded]    com.adobe.CS5ServiceManager.plist Support
        [running]    com.hp.productresearch.plist Support
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist Support
        [invalid?]    com.adobe.SwitchBoard.plist Support
        [loaded]    com.microsoft.office.licensing.helper.plist Support
        [running]    com.surteesstudios.hddfancontroldaemon.plist Support
    User Launch Agents: ℹ️
        [loaded]    com.adobe.AAM.Updater-1.0.plist Support
        [loaded]    com.adobe.ARM.[...].plist Support
        [loaded]    com.adobe.ARM.[...].plist Support
        [invalid?]    com.citrixonline.GoToMeeting.G2MUpdate.plist Support
        [loaded]    com.google.keystone.agent.plist Support
    User Login Items: ℹ️
        GrowlHelperApp    Application (/Library/PreferencePanes/Growl.prefPane/Contents/Resources/GrowlHelperApp.app)
        iTunesHelper    UNKNOWN (missing value)
        EvernoteHelper    Application (/Applications/Evernote.app/Contents/Library/LoginItems/EvernoteHelper.app)
        Google Drive    ApplicationHidden (/Applications/Google Drive.app)
        Dropbox    ApplicationHidden (/Applications/Dropbox.app)
    Internet Plug-ins: ℹ️
        Default Browser: Version: 600 - SDK 10.10
        AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 Support
        FlashPlayer-10.6: Version: 15.0.0.239 - SDK 10.6 Support
        AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
        Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
        Flash Player: Version: 15.0.0.239 - SDK 10.6 Support
        QuickTime Plugin: Version: 7.7.3
        iPhotoPhotocast: Version: 7.0 - SDK 10.8
        SharePointBrowserPlugin: Version: 14.4.6 - SDK 10.6 Support
        AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
        CouponPrinter-FireFox_v2: Version: Version 1.1.6
        JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
    User Internet Plug-ins: ℹ️
        CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 Support
    Safari Extensions: ℹ️
        AllMyTube
    3rd Party Preference Panes: ℹ️
        Flash Player  Support
        Growl  Support
        HDD Fan Control  Support
    Time Machine: ℹ️
        Skip System Files: NO
        Auto backup: YES
        Volumes being backed up:
            SuperCool: Disk size: 510.88 GB Disk used: 190.66 GB
        Destinations:
            NATURE2020 [Local]
            Total size: 319.03 GB
            Total number of backups: 4
            Oldest backup: 2014-09-10 17:52:44 +0000
            Last backup: 2014-11-19 21:23:34 +0000
            Size of backup disk: Too small
                Backup size 319.03 GB < (Disk used 190.66 GB X 3)
    Top Processes by CPU: ℹ️
            22%    mds
             6%    WindowServer
             4%    Creative Cloud
             3%    Dropbox
             0%    Google Drive
    Top Processes by Memory: ℹ️
        223 MB    Finder
        137 MB    mds_stores
        120 MB    Dropbox
        86 MB    Creative Cloud
        86 MB    WindowServer
    Virtual Memory Information: ℹ️
        2.08 GB    Free RAM
        2.82 GB    Active RAM
        1.64 GB    Inactive RAM
        1.59 GB    Wired RAM
        14.83 GB    Page-ins
        2.06 GB    Page-outs

    Lex...
    Here's the new EtreCheck that I just ran. At a glance, it seems I may have missed deleting some things or they are stored in an additional location? I haven't jumped into anything yet to really test if there's a difference in performance for me. Once I do I will post that information.
    EtreCheck version: 2.0.11 (98)
    Report generated December 3, 2014 at 8:46:56 AM EST
    Hardware Information: ℹ️
        MacBook Pro (13-inch, Early 2011) (Verified)
        MacBook Pro - model: MacBookPro8,1
        1 2.3 GHz Intel Core i5 CPU: 2-core
        8 GB RAM Upgradeable
            BANK 0/DIMM0
                4 GB DDR3 1333 MHz ok
            BANK 1/DIMM0
                4 GB DDR3 1333 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
        Intel HD Graphics 3000 - VRAM: 512 MB
            Color LCD 1280 x 800
    System Software: ℹ️
        OS X 10.10.1 (14B25) - Uptime: 12:43:15
    Disk Information: ℹ️
        Crucial_CT512MX100SSD1 disk0 : (512.11 GB)
        S.M.A.R.T. Status: Verified
            EFI (disk0s1) <not mounted> : 210 MB
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
            SuperCool (disk1) /  [Startup]: 510.88 GB (322.45 GB free)
                Core Storage: disk0s2 511.25 GB Online
        MATSHITADVD-R   UJ-898 
    USB Information: ℹ️
        Apple Inc. FaceTime HD Camera (Built-in)
        Microsoft Microsoft® Nano Transceiver v2.0
        Apple Inc. BRCM2070 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Inc. Apple Internal Keyboard / Trackpad
        Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Launch Agents: ℹ️
        [running]    com.adobe.AdobeCreativeCloud.plist Support
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist Support
        [loaded]    com.microsoft.office.licensing.helper.plist Support
    User Launch Agents: ℹ️
        [loaded]    com.adobe.ARM.[...].plist Support
        [loaded]    com.google.keystone.agent.plist Support
    User Login Items: ℹ️
        None
    Internet Plug-ins: ℹ️
        FlashPlayer-10.6: Version: 15.0.0.239 - SDK 10.6 Support
        QuickTime Plugin: Version: 7.7.3
        Flash Player: Version: 15.0.0.239 - SDK 10.6 Support
        Default Browser: Version: 600 - SDK 10.10
        SharePointBrowserPlugin: Version: 14.4.6 - SDK 10.6 Support
        Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
        iPhotoPhotocast: Version: 7.0 - SDK 10.8
    User Internet Plug-ins: ℹ️
        CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 Support
    3rd Party Preference Panes: ℹ️
        Flash Player  Support
    Time Machine: ℹ️
        Skip System Files: NO
        Auto backup: YES
        Volumes being backed up:
            SuperCool: Disk size: 510.88 GB Disk used: 188.43 GB
        Destinations:
            NATURE2020 [Local]
            Total size: 319.03 GB
            Total number of backups: 4
            Oldest backup: 2014-09-10 17:52:44 +0000
            Last backup: 2014-11-19 21:23:34 +0000
            Size of backup disk: Too small
                Backup size 319.03 GB < (Disk used 188.43 GB X 3)
    Top Processes by CPU: ℹ️
             7%    WindowServer
             1%    launchservicesd
             0%    launchd
             0%    fontd
             0%    Core Sync
    Top Processes by Memory: ℹ️
        103 MB    mds_stores
        86 MB    Creative Cloud
        86 MB    Finder
        77 MB    WindowServer
        60 MB    systemstatsd
    Virtual Memory Information: ℹ️
        3.93 GB    Free RAM
        2.28 GB    Active RAM
        900 MB    Inactive RAM
        1.48 GB    Wired RAM
        2.25 GB    Page-ins
        0 B    Page-outs

  • Macbook pro 13' late 2011 4GB RAM...using lot of RAM

    macbook pro 13' late 2011 4GB RAM...using lot of RAM
    I have attatched screenshot...please help...sometime free memory is only 15 or 20 mb and i have to restart...after restart it works fine for 10 to 20 minuts

    its very easy to do, here are step by step instructions with photos

  • Sessions that consume a lot of Memory

    Hi,
    How to retrieve sessions that consume a lot of Memory (Database 11.2.0.2) ?
    Regards,

    791550 wrote:
    Hi,
    How to retrieve sessions that consume a lot of Memory (Database 11.2.0.2) ?
    Regards,Hi. You can query v$sesstat,v$statname and can join with v$session then you will get which session consume how much memory like below query
    select
            username,
            sess.sid,
            value,
            name
    from  v$sesstat sst,
            v$statname sn,
            v$session sess
    where sst.statistic#=sn.statistic# and
    sess.sid=sst.sid and
    username is not null and
    upper(sn.name) like '%MEMORY%'
    order by username

  • Yosemite is using a lot of RAM (about 5GB) in my MAC, why?

    Yosemite is using a lot of RAM (about 5GB) in my MAC, why?

    The article below, although written for Mavericks, applies to Yosemite as well.
    http://www.switchingtomac.com/tutorials/osx/understanding-memory-pressure-in-os- x-mavericks/

  • My mac book air (mountain OS X ) mid 2011 consuming a lots of data .....

    My mac book air consuming a lots of data per hour ... Even if am not browsing too it's automatically consuming ...how can I stop it ? It's losing like 1 GB per hour ...kindly help me to recover it ...I am new to mac book air ...thank u

    I think you mean that it's using network bandwidth.
    Any client on a wireless network, including clients you don't know about, could be consuming bandwidth. Networks must be protected with WPA2 security. If yours isn't, change the security setting on the access point. If it's already set that way, change the password. Make it a string of at least 8 random characters, including digits and upper- and lower-case letters. The password is saved in the keychain and you don't have to be able remember it; in fact, you shouldn't be able to remember it.
    You make these changes in AirPort Utility, if the access point is an Apple device, or in a web browser otherwise.
    If the network or the password was insecure, and bandwidth use returns to normal after securing it, you can be pretty sure the problem was caused by intruders.
    But intrusion may not be the issue. Most often BitTorrent, iCloud or some other cloud-data application is involved in cases of mysterious bandwidth use by a Mac. If you use iCloud, uncheck at least Photo Stream and Documents & Data in its preference pane and see whether there's any change. If you use third-party network backup software, disable that. If you use a torrent client, remove it.
    Otherwise, there's no easy way to monitor network usage per process using built-in tools. If you're an advanced user and you want to try, see the manual page for the nettop(1) shell command. It may or may not provide the information you're looking for.
    The third-party products Rubbernet and Little Snitch are supposed to record network usage by processes. I can't vouch for them. Both were available as free trials, the last time I checked. I suggest you uninstall either one when the question has been answered.

  • Xorg.bin use a lot of ram Catalyst

    Hello! After installing catalyst from Violo's repo i have noticed that Xorg.bin use a lot of ram(when i start the laptop it is 25mb but it keep rising till it get to 1.5gb in about 2h and I restart to free memory) This is on X-server 1.7 and now i downgrade to 1.16.4 but no effect. Can someone help me please. Thank you!

    elll wrote:Do you know how to downgrade catalyst? Should i use pacman -U catalyst? [link]https://wiki.archlinux.org/index.php/Do … s#Warnings[/link] And if yes do i have to downgrade Xorg too because i allready do that?
    The nicer way to do this is to use the [catalyst-stable-14.X] repository databases in this manner (where you replace X with the corresponding number):
    [catalyst-stable-14.X]
    Server = http://catalyst.wirephire.com/repo/catalyst/$arch
    elll wrote:Does someone know how to fix this issue or if there will be released fix for this?
    No idea. Ask the AMD Developers upstream.
    Last edited by clfarron4 (2015-02-18 11:08:30)

  • Macbook pro late 2011 is on Mac OS X v10.7 Lion and it is using lot of RAM

    Macbook pro late 2011 is on Mac OS X v10.7 Lion and it is using lot of RAM...when I turn on after 2minutes it freezes and do not repond and system prefrences also not working...plz help me....I don,t have mac os disc
    I have tried safe mode boot, NVRAM and PRAM reset but no luck...

    First, try a Safe Mode boot.
    Startup your Mac in Safe Mode
    A Safe Mode boot takes a longer than a normal boot so be patient.
    Once you are in Safe Mode, click Restart from your Apple () menu.
    If that didn't help, reintall OS X..
    Restart your Mac while holding down the Command + R keys so you can access the built-in utilities in OS X Recovery
    message edited by: cs

Maybe you are looking for

  • PO creation-ME21n-Why SAP does not check company code and Plant relation

    Hi All, Does someone know, why SAP does not check Plant and company code relation at the time of PO creation or how can we put validation between plant and company code at the time of PO creation. <b>Example:</b> Suppose i have a company 0001 which i

  • Sample code for calling web services for export

    Hi I am trying to use web service ExportProject to export a project out of Primavera DB. The Export service uses MTOM (Message Transmission Optimization Mechanism) to send the output files as attachments. Need some information on - Can the export ser

  • Documentation on ABAP

    Hi, Myself is sandeep. i had ABAP training three year ago but was not able to continue with SAP there after and i out of touch from SAP ABAP since last 3 years. Can anybody share some good docs on ABAP with me so that i can start it again. My email i

  • FinalCut Studio crashing while rendering

    On 2 different machines, a 2007 MacPro (6gb ram) and a 2008 Macbookpro (2gb ram) I am converting Go2meeting wmv files into h264 files for posting to brightcove. While rendering the movies, at completely random intervals, I'll get an error message as

  • Making a forum thread/section hidden from anyone NOT logged in.

    I was wondering if it would be possible to set the forum software to hide a specific thread/section from anyone not logged in.  Specifically I had in mind the email signup thread here. It would be nice to hide at least this specific thread from anyon