Whatz Default UserID and Passwd for ODM and SSO

Hi,
I have installed oracle9i on win2k.After the installation,i tried to use the Oracle Directory Manager.
I use the Default Userid "cn=orcladmin" and the Default passwd "welcome" to connect to OID server through oracle directory manager.
It gives me an Bind Failure Error. I have the OID running on localhost on Non-SSL Port 389.
Is there any other configuration that needs to be done to use ODM...or my default user name and password wrong when i connect for the first time..
Secondly when i logon to the single sign on server(SSO) using the same credentials mentioned as above it throws an Authentication failed (WWC-41419) Error.
My question is are my credntials wrong and if so what are the right ones or Is there some other configuration that needs to be done?
pls help in this regard...without this i cant proceed.
Thanx

Thanx for the Reply...It worked.
I have another question...Once i login to OID using ODM,the Entry Management Tree has no nodes(DIT) under it.
Then wherez the cn=orclamdin entry stored ?
There were no errors after the installation though...
Do i need to run some scripts to create the default entries after the installation.?
Thanx

Similar Messages

What are the default userid and password to logon to Oracle Applications

What are the default userids and passwords to logon to Oracle Applications Manager?

There r no any default password for Application Manager,
However userID is applmgr and if I have to create a password for applmgr I would do that as welcome or welcome1 so the applmgr user can change it when he/she log on first time as needed.

Connect to R/3 failed. USERID and/or PASSWD could not be retrieved from SSFS

Dear All,
Solman installation 7.1 fails with Error in the Start instance phase.
Database : Oracle
OS: AIX 6100-07-02-1150
Oracle version: 11.2.0.3
Kernel version: 720 patch number is 114
I have checked the SAP Note #1639578 - SSFS as password storage for primary database connect .
The below values has alreadt been set in default profile and in environment variables also
RSEC_SSFS_DATAPATH=/usr/sap/SMI/SYS/global/security/rsecssfs/data
RSEC_SSFS_KEYPATH=/usr/sap/SMI/SYS/global/security/rsecssfs/key
rsdb_ssfs_connect=1
2. The Permission of the Global directory
solmantrg:smiadm 13> ls -all
total 0
drwxr-xr-x    5 smiadm   sapsys          256 Apr 18 17:37 .
drwxr-xr-x    5 smiadm   sapsys          256 Apr 19 21:51 ..
drwxr-xr-x    3 smiadm   sapsys          256 Apr 18 17:37 exe
drwxr-xr-x    3 smiadm   sapsys          256 Apr 18 17:37 gen
lrwxrwxrwx    1 smiadm   sapsys           18 Apr 18 17:37 global -> /sapmnt/SMI/global
Permission Of security Folder:
solmantrg:smiadm 17> ls -all
total 8
drwx------    5 smiadm   sapsys          256 Apr 22 13:25 .
drwxr-xr-x    5 smiadm   sapsys          256 Apr 18 17:37 ..
-rw-r--r--    1 smiadm   sapsys            0 Apr 22 13:25 ABAPPROT
drwxr-xr-x    8 smiadm   sapsys          256 Apr 18 17:39 SDT
-rw-r--r--    1 smiadm   sapsys          272 Apr 18 17:37 ms_acl_info
drwxr-xr-x    2 smiadm   sapsys          256 Apr 22 13:26 sapcontrol
drwx------    5 smiadm   sapsys          256 Apr 18 17:37 security
Permission Of rsecssfs:
solmantrg:smiadm 20> ls -all
total 0
drwx------    5 smiadm   sapsys          256 Apr 18 17:37 .
drwx------    5 smiadm   sapsys          256 Apr 22 13:25 ..
drwx------    2 smiadm   sapsys          256 Apr 19 21:01 data
drwx------    3 smiadm   sapsys          256 Apr 18 17:37 lib
drwx------    4 smiadm   sapsys          256 Apr 18 17:37 rsecssfs
permission Of data & Key
solmantrg:smiadm 22> ls -all
total 0
drwx------    4 smiadm   sapsys          256 Apr 18 17:37 .
drwx------    5 smiadm   sapsys          256 Apr 18 17:37 ..
drwx------    2 smiadm   sapsys          256 Apr 22 12:42 data
drwx------    2 smiadm   sapsys          256 Apr 18 17:37 key
permission Of SSFS_SMI.DAT
solmantrg:smiadm 24> pwd
/sapmnt/SMI/global/security/rsecssfs/data
solmantrg:smiadm 25> ls -all
total 8
drwx------    2 smiadm   sapsys          256 Apr 22 12:42 .
drwx------    4 smiadm   sapsys          256 Apr 18 17:37 ..
-rw-------    1 smiadm   sapsys          972 Apr 22 12:42 SSFS_SMI.DAT
No key for File ( SSFS_SMI.KEY ) IN PATH ( /sapmnt/SMI/global/security/rsecssfs/key) Exists
solmantrg:smiadm 28> cd key
solmantrg:smiadm 29> ls -altr
total 0
drwx------    4 smiadm   sapsys          256 Apr 18 17:37 ..
drwx------    2 smiadm   sapsys          256 Apr 18 17:37 .
3. From smiadm, R3trans -x shows 0000. BUT from ora>sid>, R3trans -x shows 0012
solmantrg:orasmi 2> R3trans -x
This is R3trans version 6.22 (release 720 - 26.10.11 - 13:00:00).
unicode enabled version
2EETW169 no connect possible: "DBMS = ORACLE                           --- dbs_ora_tnsname = 'SMI'"
R3trans finished (0012).
4. Output Of Trans.log from Ora<SID> User
solmantrg:orasmi 3> more trans.log
4 ETW000 R3trans version 6.22 (release 720 - 26.10.11 - 13:00:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time   : 22.04.2014 - 14:41:32
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -x
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [     dev trc,00000] Tue Apr 22 14:41:32 2014                                                 145 0.000145
4 ETW000 [     dev trc,00000] db_con_init called                                                        41 0.000186
4 ETW000 [     dev trc,00000] set_use_ext_con_info(): ssfs will be used to get connect information
4 ETW000                                                                                                  91 0.000277
4 ETW000 [     dev trc,00000] determine_block_commit: no con_hdl found as blocked for con_name = R/3
4 ETW000                                                                                                  84 0.000361
4 ETW000 [     dev trc,00000] create_con (con_name=R/3)                                                 40 0.000401
4 ETW000 [     dev trc,00000] Loading DB library '/usr/sap/SMI/SYS/exe/run/dboraslib.o' ...             74 0.000475
4 ETW000 [     dev trc,00000] DlLoadLib() success: dlopen("/usr/sap/SMI/SYS/exe/run/dboraslib.o"), hdl 0
4 ETW000                                                                                               31906 0.032381
4 ETW000 [     dev trc,00000] Library '/usr/sap/SMI/SYS/exe/run/dboraslib.o' loaded                     49 0.032430
4 ETW000 [     dev trc,00000] function DbSlExpFuns loaded from library /usr/sap/SMI/SYS/exe/run/dboraslib.o
4 ETW000                                                                                                  61 0.032491
4 ETW000 [     dev trc,00000] Version of '/usr/sap/SMI/SYS/exe/run/dboraslib.o' is "720.00", patchlevel (0.114)
4 ETW000                                                                                                 493 0.032984
4 ETW000 [     dev trc,00000] function dsql_db_init loaded from library /usr/sap/SMI/SYS/exe/run/dboraslib.o
4 ETW000                                                                                                  55 0.033039
4 ETW000 [     dev trc,00000] function dbdd_exp_funs loaded from library /usr/sap/SMI/SYS/exe/run/dboraslib.o
4 ETW000                                                                                                 108 0.033147
4 ETW000 [     dev trc,00000] New connection 0 created                                                 264 0.033411
4 ETW000 [     dev trc,00000] 0: name = R/3, con_id = -000000001, state = DISCONNECTED, tx = NO , bc = NO , hc = NO , perm = YES, reco = NO , frco = NO , timeout = 00
0, con_max = 255, con_opt = 255, occ = NO , prog =
4 ETW000                                                                                                  79 0.033490
4 ETW000 [     dev trc,00000] db_con_connect (con_name=R/3)                                             79 0.033569
4 ETW000 [     dev trc,00000] determine_block_commit: no con_hdl found as blocked for con_name = R/3
4 ETW000                                                                                                  53 0.033622
4 ETW000 [     dev trc,00000] find_con_by_name found the following connection:                          35 0.033657
4 ETW000 [     dev trc,00000] 0: name = R/3, con_id = 000000000, state = DISCONNECTED, tx = NO , bc = NO , hc = NO , perm = YES, reco = NO , frco = NO , timeout = 000
, con_max = 255, con_opt = 255, occ = NO , prog =
4 ETW000                                                                                                  74 0.033731
4 ETW000 [     dev trc,00000] read_con_info_ssfs(): reading connect info for connection R/3             36 0.033767
4 ETW000 [     dev trc,00000] read_con_info_ssfs(): DBSL supports extended connect protocol             49 0.033816
4 ETW000                          ==> connect info for default DB will be read from ssfs
4 ETW000 [     dev trc,00000] read_con_info_ssfs(): register callback ssfs_dbi_trace and max level 2
4 ETW000                                                                                                  88 0.033904
4 ETW000 [     dev trc,00000] function DbSlExpFuns loaded from library /usr/sap/SMI/SYS/exe/run/dboraslib.o
4 ETW000                                                                                                  61 0.032491
4 ETW000 [     dev trc,00000] Version of '/usr/sap/SMI/SYS/exe/run/dboraslib.o' is "720.00", patchlevel (0.114)
4 ETW000                                                                                                 493 0.032984
4 ETW000 [     dev trc,00000] function dsql_db_init loaded from library /usr/sap/SMI/SYS/exe/run/dboraslib.o
4 ETW000                                                                                                  55 0.033039
4 ETW000 [     dev trc,00000] function dbdd_exp_funs loaded from library /usr/sap/SMI/SYS/exe/run/dboraslib.o
4 ETW000                                                                                                 108 0.033147
4 ETW000 [     dev trc,00000] New connection 0 created                                                 264 0.033411
4 ETW000 [     dev trc,00000] 0: name = R/3, con_id = -000000001, state = DISCONNECTED, tx = NO , bc = NO , hc = NO , perm = YES, reco = NO , frco = NO , timeout = 00
0, con_max = 255, con_opt = 255, occ = NO , prog =
4 ETW000                                                                                                  79 0.033490
4 ETW000 [     dev trc,00000] db_con_connect (con_name=R/3)                                             79 0.033569
4 ETW000 [     dev trc,00000] determine_block_commit: no con_hdl found as blocked for con_name = R/3
4 ETW000                                                                                                  53 0.033622
4 ETW000 [     dev trc,00000] find_con_by_name found the following connection:                          35 0.033657
4 ETW000 [     dev trc,00000] 0: name = R/3, con_id = 000000000, state = DISCONNECTED, tx = NO , bc = NO , hc = NO , perm = YES, reco = NO , frco = NO , timeout = 000
, con_max = 255, con_opt = 255, occ = NO , prog =
4 ETW000                                                                                                  74 0.033731
4 ETW000 [     dev trc,00000] read_con_info_ssfs(): reading connect info for connection R/3             36 0.033767
4 ETW000 [     dev trc,00000] read_con_info_ssfs(): DBSL supports extended connect protocol             49 0.033816
4 ETW000                          ==> connect info for default DB will be read from ssfs
4 ETW000 [     dev trc,00000] read_con_info_ssfs(): register callback ssfs_dbi_trace and max level 2
4 ETW000                                                                                                  88 0.033904
4 ETW000 [     dev trc,00000] RSecSSFs: Entering function "RSecSSFsGetRecord" [rsecssfs.c 836]          84 0.033988
4 ETW000 [     dev trc,00000] RSecSSFs: Configuration data read from environment parameters [rsecssfs.c 3664]
4 ETW000                                                                                               11463 0.045451
4 ETW000 [     dev trc,00000] RSecSSFs: Data file "/usr/sap/SMI/SYS/global/security/rsecssfs/data/SSFS_SMI.DAT" cannot be opened for read [rsecssfs.c 2198]
4 ETW000                                                                                                 174 0.045625
4 ETW000 [     dev trc,00000] RSecSSFs: Exiting function "RSecSSFsGetRecord" with return code 1 (message: Data file "/usr/sap/SMI/SYS/global/security/rsecssfs/data/SS
FS_SMI.DAT" cannot be opened for read) [rsecssfs.c 897]
4 ETW000                                                                                                  91 0.045716
4 ETW000 [    dbcon.c ,00000] *** ERROR => read_ssfs_record(): RSecSSFsGetRecord(DB_CONNECT/DEFAULT_DB_USER)=1 : Data file "/usr/sap/SMI/SYS/global/security/rsecssfs/
data/SSFS_SMI.DAT" cannot be opened for read
4 ETW000                                                                                                  82 0.045798
4 ETW000 [     dev trc,00000] read_con_info_ssfs(): deregister callback ssfs_dbi_trace                  37 0.045835
4 ETW000 [    dbcon.c ,00000] *** ERROR => Connect to R/3 failed. USERID and/or PASSWD could not be retrieved from SSFS
4 ETW000                                                                                                  68 0.045903
2EETW169 no connect possible: "DBMS = ORACLE                           --- dbs_ora_tnsname = 'SMI'"
trans.log: END
Kindly help us to fix the error ""ERROR => read_ssfs_record(): RSecSSFsGetRecord(DB_CONNECT/DEFAULT_DB_USER)=1 : Data file "/usr/sap/SMI/SYS/global/security/rsecssfs/
data/SSFS_SMI.DAT" cannot be opened for read"
Thanks and Regards,
Gayathri.K

Hi Deepak,
Now my installation failed with "Start Java engine "phase as in the attached screenshot.
scs00 instance is failing and i am unable to start it.
ERROR      2014-04-22 18:28:50.499 [sixxcstepexecute.cpp:899]
FCO-00011 The step startSCS with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|onehost|0|NW_CI_Instance|ind|ind|ind|ind|ci|0|NW_CI_Instance_Configure_Java|ind|ind|ind|ind|javaconfig|0|startSCS was executed with status ERROR ( Last error reported by the step: Instance 'SCS00/solmantrg' of SAP system SMI is in an inconsistent state: the processes do not seem to have been started within the instance.).
when i checked in getprocess list
solmantrg:smiadm 56> sapcontrol -prot NI_HTTP -nr 00 -function GetProcessList
22.04.2014 18:29:43
GetProcessList
OK
name, description, dispstatus, textstatus, starttime, elapsedtime, pid
msg_server, MessageServer, GRAY, Stopped, , , 13631618
enserver, EnqueueServer, GRAY, Stopped, , , 11468864
have attached the screenshot and sapinst.dev.log
Please assist
regards,
gayathri.K

SSO Configuration not working - Still asking for Userid and password

Hi Guys,
I have configured Portal to use with backend server. Configured WAS & ITS and created System Alias.
For Testing SSO I did following steps on portal:
System Administration > Support > SAP Appliction > SAP Transaction
Selected system Alias and tcode se12. Selected SAPGUI for HTML. Pressed Go.
Instead of SE12 screen, I get Logon Screen asking for USERID and password.
I should be getting SE12 screen directly without entering USERID and PASSWORD.
I tested with Transaction iView (SE12) and getting the same logon screen. After entering userid/password it displays SAP Easy Access menu instead of displaying SE12
Please help.
Thanks a lot.
mini

Hi Sandeep.
Thanks for your reply. Here are the answers to your questions:
1. Is the username same in the portal and the backend that you are trying to connect, ensure that there is the same username that exists in the system you want to connect to. YES
2. The ticket is imported properly- check the ACL and Certificate list in Tcode STRUSTSSO2.
Ticket is valid from 01 Jan 2009 to 14 Mar 2012.
3. Check for the parameters in place login_accept_ticket = 1 and login_create_ticket = 2 and icm_hostname_full is set to FQDN.
In RZ10 it has 3 parameters:
login/accept_sso2_ticket = 1
login/create_sso2_ticket = 2
icm/host_name_full = sapecc6.tri.com
4. What is the result when you test the system connection?
WAS & ITS Connections are successful.
Connection test for Connectors is giving following results:
Results
Retrieval of default alias successful
Connection failed. Make sure user mapping is set correctly and all connection properties are correct.
My Connectors Details:
Application Host : sapecc6
Gateway Host : sapecc6.tri.com
Gateway Host : 3301
SAP Client : 800
SAP Client : EC7
SAP System Number : 01
Server Port: 3201
System Type: SAP_R3
I am using same userid for Portal and backend.
5. Are the 2 systems that you want to configure SSO in the same domain?
I am trying to connect R3 to Portal.
Please give me directions to fix the problem.

BSP - UserId and Password for Internal Users - Anonymous for other users

Hello,
We developed an application via BSP's. This application can be accessed by two kind of users.
1. External Users, with should access the page without using a userId and password.
2. Internal Users, they will have more authorisation and need to specify their userId and Password.
How can we accomplish this? I tried internal aliases, but can't get it to work properly.
In the first service 'zbsp' I didn't specify a userId and password in sicf.
Then I created an internal alias 'zbsp' referring to this 'zbsp'. In this alias I specified a userId and Password, but the system still asks for a userId and Password. (and after logging in the system gives the following error: The application name in URL .../bc/bsp/sap/zbsp2/uat_report.htm is invalid.)
What did I do wrong? Or are there other ways to accomplish this?
Greetings,
Bart

Take a look at the following mesaages that discussed the whole SSO and SSO2 ticket logins.
As for a way to handle the two different login types. Well first and formost - active the SSO Tickets on your system. Set your BSP up for that.
Then create a new starting page with an alias to the pöublic section for BSP's in your system. On this page make two links.
For your external users - one that redirects to your BSP passing the user and password in the url for the "read only external user" - that's the sap-user=name here&sap-password=passwordhere.
For your internal people give them simply the link to the BSP which when they click it will see no user name and password and redirect them to the BSP login.
Make sure you setup the BSP login according to SAP note 517860 and follow the instructions from http://help.sap.com/saphelp_nw04/helpdata/en/1d/13c73cee4fb55be10000000a114084/frameset.htm using the supplied SYSTEM_PUBLIC)
It's a bit basic but it works, we do it
Oh and setting up the system for the SSO (transaction sso2) is very very simple!!

When printing a list in Address Book, how can I select more than the default Attributes and keep them selected when I print again? I want to print ALL information for contacts so I have email address, notes, phone, company, title, etc all on one page.

When printing a list in Address Book, how can I select more than the default Attributes and keep them selected when I print again? I want to print ALL information for contacts so I have email address, notes, phone, company, title, etc all on one page. I don't want to have to check off an additional 5 or 6 attributes each time I print out contact information. Is there a way to change the default setting for printing lists, so it is not just "phone," "photo," and "job title?"

I have a user who wants to do this same thing. I did not find any way either to default the attributes to anything other than what you see the first time. Seems like such a trivial thing, hard to believe they do not allow it. I did find a program for this called iDress but I can't seem to download it from any links on the Internet. Not sure if it is free or not, but it was recommended by a link on the Mac support site.

Detect what the default edit form is for a document library and list using jquery

Hi,
So what I have done is with some jquery made it that when a files are dragged and dropped into a document library and there is a required field such as "Metadata" the EditForm.aspx opens up for the user to fill in the required column. I am building
the url up from what I have found in SharePoints DragDrop.js file. This is all working perfectly I just need to find a way to dynamically find what the default edit form is for that document library as I have just hardcoded like this...
g_currentControl.strSiteUrl + "/" + this.ListName + "/Forms/EditForm.aspx?ID=" + id
So I need a way to figure out what the default edit form is instead of hard coding like this in case someone creates a custom_editform.aspx or something for one of the lists.
Thanks

You can get it by hitting this REST end point via JQuery:
http://weburl/_api/Web/Lists(guid'YOURLISTGUID')/Forms
Chris Givens CEO, Architecting Connected Systems
Blog Twitter

How to set default encoding and charsets for jsp and servlets.

Hi,
Is there any possibility to set default encoding or charset for jsps and servlest (for both request and response)?
For example in Weblogic such parameters can be set in weblogic specific configuration files (weblogic.xml).
Thanks in advance.

Hi,
I created one request with logo in the header an page in the footer etc. and called StyleSheet. After you can import this formats by each request.
You can do this in compound layout.
Regards,
Stefan

How to change the parameter 'Default Servers To Use For Viewing And Modification' using java api dynamically.

Hi,
I need to change the Crystal Reports setting 'Default Servers To Use For Viewing And Modification' to a particular server.this i need to do using java api.
could you pls provide me the sample code for this.
Regards
Srinivas

The IReport interface extends IViewingServerGroupInfo interface, that allows you to specify the server group.
The choice selection for that interface is as follows: 0 = first available, 1 = prefer the selected server group, and 2 = only use the selected server group.
The server group selection is by the SI_ID for that server group InfoObject.
Sincerely,
Ted Ueda - Developer Support

Edit the default workspace and actions for a group of computers?

I am a high school yearbook teacher, and I have a group of Windows 7 desktops running CS6. I want to replace the default workspace and actions on them to increase productivity. Where would I place the workspace and action files on the computers so they would be applied to all the users on the computer?
Thank you!

Hi,
I want to purchase a Macmini with SL Server and create a photo competition solution for a camera club. The solution needs to be able to accept uploaded images and the solution needs to let the user associate a set of images to a competition and from there the solution needs to make sure that the filename, format, size and embedded metadata is correct before storing and processing them further. Friends I have talked to say I need a classic CMS solution so I may need to investigate instead of my planned AppleScript/Automator solution.
Also - thank you for offering to develop, but I had kinda planned to do this myself to build some knowledge and also get to know the server better.
Anyone else using the SnowLeo server for a solution like this?
Kjell Are Refsvik
Norway

Defaulting batch and valuation type for a specific division for tcode me21n

Hi
I would like to default the valuation type and batch for a specific division while creating the PO.
Kindly let me know if there is any user exit for this.
Thanks & Regards
Bhagya

Hi .
Actually my requirement is while you are creating PO, the value say 'ABC' must be defaulted both in Batch and valuation type but when change that to 'DEF' it should allow you.. means you should be able to modify the batch and valuation type fields. I can be kept empty also.
I tried using field exit to default Batch and valuation type, but it does not work if the batch is empty.
If I use the BADI you mentioned what are import and export parameters and how do I code to meet my requirement.
Kindly let me know.
I will definitely reward points if it works.
Thanks in advance
Bhagya

Default view and date format for anonymous access in convergence calendar

Hi,
is there an option to configure default view and date format when user access to a calendar with anonymous access ?
Actually, date format is M/D and I want D/M.
And the default view is monthly, and I would like to set to 7 days view.
Thx for your help
Regars,
JC

jchatriot wrote:
is there an option to configure default view and date format when user access to a calendar with anonymous access ?No. I've raise a new Request For Enhancement:
RFE #6961895 - "Provide configuration option and URL parameter to set Anonymous Calendar view and date format"
Regards,
Shane.

Default Username and Password for Sample Packages

Hello,
What is the default username and password for sample packages mentioned in this article for all the sample packaged applications?
http://www.oracle.com/technology/products/database/application_express/packaged_apps/packaged_apps.html#PACKAGED
Regards
Edited by: user20090209 on May 19, 2010 1:37 PM

Hi,
Try same user name and password as you login to your workspace.
Most of applications use Application Express authentication
Br,Jari
Edited by: jarola on May 19, 2010 9:06 AM
And when you have downloaded and installed application to your workspace, you can always change authentication

HANA One on AWS default username and password for hdbsql having issues

Hello, I am going through the SAP HANA Academy online for the HANA Recommends project, and just getting my HANA instance setup and running through AWS.
In this video: http://youtu.be/P0U-XSnSd1Y
There is a point where the author is showing how to change the password for hdbsql. In order to do this, I need to log into hdbsql first using the default password, and then change it. Unfortunately, I keep getting an error saying that the username or password is incorrect (*10: invalid username or password: SQLSTATE: 28000).
Here are the commands I'm entering into PUTTY:
hdbsql => \c -i 00 -n localhost:30015 -u SYSTEM -p manager
Is the default password different?

Hi Ahmed,
I got the same problem.
To solve it, you can change the password in SAP HANA One Management Console.
Open your browser and put in the public DNS of your HANA box.
Enter your AWS Access Key Id and Secret Access Key
You should have the options to change the password.
For more information, go to
Configuring SAP HANA One | SAP HANA

What is the default username and password for administering my f4500 deskjet printer?

I need to administer my F4500 Deskjet through my web browser, but do not know the username and password. I presume there is a way to default the settings, but I need to know the defaults. Please provide the default username and password for web access.
Thanks.

The default username is Admin, but the password is blank by default. Somehow, a password was added at some point.
You can try going to the EWS and going to Settings and looking for a password reset option in the Administrator Settings section. If it is there, it will be the only way I know of clearing the password on this particular printer.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Whatz Default UserID and Passwd for ODM and SSO

Similar Messages

Maybe you are looking for