Wheel and select button unresponsive
My wheel and select button are completely unresponsive other than to reset. I've reset it like 10 times, and restored factory settings 2 times. I have the most up to date firmware and itunes.
I can't let the battery drain because it is shutting off automatically now since I can't punch in the settings.
I have the same problem - see below.
Immediately after upgrading to iTunes 7.1.1.5. and updating, charging, and syncing, my iPod does not function properly.
Symptoms:
_The click wheel does not seem to work any more. The hold switch is set correctly to the left position.
_No response to a reset by holding menu / select buttons for 10 secs.
_When iPod is plugged into my CPU it seems to act normally - the screen lights up briefly and displays the message "do not connect" as iTunes starts and syncs all checked songs like normal.
_After the sync the iPod display a full battery icon.
_When the iPod is unplugged from the CPU the iPod display is lit briefly, displays the menu where the user selects which language to use. There is a small icon that looks like a lock at the top of the screen. After about 15 secs the screen goes blank despite trying to scroll and make selections with the click wheel.
_The iPod does not respond to the click wheel when in Itunes (which may be normal) or when disconnected (even after switching the hold switch back and forth several times).
_The iPod shows up in iTunes and in My Computer.
_Songs on iPod open in Windows Media Player and play OK when selected directly from My Computer.
I tried restoring (1.3.1.) a dozen times and upgrading the iPod several times from Itunes and also restoring ITunes 5 but no luck.
This iPod (2g) is 15 mos. old and worked perfectly just prior to the upgrade to 7.1.1.5..
Any help would be appreciated!
sbyberg
Serial Number: 6U5483TWSZB
Similar Messages
-
My click wheel and select button are unresponsive
hi
I've had my iPod mini for just over a year now and I've had one or two problems in the past. However, I've been able to reset it by holding the select button and menu button. However, today my iPod's click wheel will not respond (and doesn't make it's usual noise) and my select button is unresponsive so I can't reset. Plus my almost full battery has just drained in less than 20 minutes. Are there any tips for restoring my iPod?
ThanksWelcome to Apple Discussions!
Try connecting it to the AC adapter after the battery is drained and resetting it. Also, is it turning on?
Finally, does it connect to your computer? Try resetting it while it is connected to the computer.
Read these tips on resetting...
http://docs.info.apple.com/article.html?artnum=61705
btabz -
Broken Menu and Select Buttons!!
My iPod mini was fine yesterday and now after wearing it doing exercise, the menu and select buttons and the scroll wheel do not work!! It still plays when i press the play button and can change track, but i dont understand why this has happened?! How can i fix it? obviously can reset it because the menu and select buttons dont work =S
"obviously can reset it because the menu and select buttons dont work =S"
It might seem so.., but have you actually tried resetting it? It might just work.
If not, I'd try restoring it.
http://docs.info.apple.com/article.html?artnum=60983
Cheers!
-Bryan -
I have an older iPod that no longer shows up in iTunes or appears to be charging. When I press the Menu and Select buttons, the Apple logo appears and then an icon of a battery with an exclamation point. Is it dead for good?
If it is otherwise working, you can change the battery. If you want to do it yourself, you can buy the part on eBay and other online sources. Just make sure you know the type of iPod you have so that you get the right part.
http://support.apple.com/kb/HT1353
There are online guides, including the ones on this web site
http://www.ifixit.com/Device/iPod
(Note: Most replacement batteries come with plastic/nylon tools seen in the guides.)
You can also have a repair business do the work.
If it is just the battery, if you do a Reset (using the Menu and Select buttons) while it is connect to your computer, I think it should still be recognized by iTunes. -
iPod nano 3rd gen. Apple logo remains on screen and iTunes doesn't recognise it's plugged in, I can't even turn it off. I've tried to get to disc menu but when I hold the 'menu and select button' it reboots and then doesn't recognise the select and play button to show the tick. I'm helpless.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
how do i unfreeze my ipod when ive already tried the menu and select button and that didnt help?
How long did you press and hold both the Select (Center) and Menu buttons together? Have you tried doing this procedure more than once? Is the hold switch in the Off position?
If nothing else, let the iPod's battery fully drain. Then charge it back up again.
B-rock -
Menu and select button causing ipod to reset
Hi,
Has anyone else had problems with their menu and select buttons causing the ipod to reset itself? As of now, I can't use either of those buttons without it resetting. I've tried using the updater, and I've tried manually resetting it. Any suggestions would be greatly appreciated.
-SarahWelcome to Apple Discussions!
Is all the software on your computer and your iPod up to date?
iTunes
iPod Updater
Updating iPod's Software
Have you tried a restore?
Restore the iPod
btabz
PS: I came into this thread thinking I was going to have to explain why holding down Menu+Select at the same time is supposed to cause a reset -
My Ipod nano says its locked and screens on and it's staying frozen. I have tried pressing the menu and select button simultaneously and still not reset. What should I do?
Right click on the iPod Nano icon. "Eject" should pop up. At least that is the way it works on Macs.
Just found this:
iPod: How to Safely Disconnect if iPod doesn't eject -
Select button unresponsive and Windows wont recognize iPod Nano 2g
My second generation 4GB iPod nano is not being recognized by Windows. I cannot reset it because the center select button is unresponsive. The other buttons and click wheel still work. Also, even when it is unplugged, it has the "Charged" screen, indicating that it does not recognize when it has been unplugged, therefore, it will not even turn off.
Any suggestions?tey pressing the play pause button or menu button or put on hold then take hold off
-
Menu and play buttons unresponsive
The menu and play buttons on the clickwheel are unresponsive, the interface is otherwise fine. I cannot turn the ipod off or return to menus after selecting something. I have already tried updating and restoring the ipod, I don't know what else to do.
Contact apple with this problem. Here is the link.
http://www.apple.com/support/ipod/ -
I am using a table which contains a text field with a lookup. I want to use the selected value of this field in a form which is acting as a selection form. No editing of the field's value is permitted. How do I just display the value of the field (which
is considered a listbox on the form) without the reverse display and the up and down selection buttons.
I can provide an illustration of the condition I am trying to overcome, but this system doesn't accept it.
Thank you for any suggestions or clarification you can provide.
Marj WeirThank you. I'll try that approach.
I found, after much experimentation, on a similar problem involving a multiselect lookup field, that if I make the field invisible, and add a textbox that displays the fieldname plus .column(0), it displays all the selected entries.
E.g.: staff.Column(0)
Staff is the field containing the last names of selected staff members.
staff.Value only shows the first name in the lookup list whether it is checked or not, so this is useless.
staff.column(0), however, (inexplicably) shows all the selected names, e.g. Jones, Smith, Wiggins.
Marj Weir
-
Non-functioning wheel and center button
i'm stuck on the main screen, but it seems to work fine since it displays the cover albums normally
i've tried the following:
[ ] restored
[ ] updated to current iTunes
[ ] fully charged
[ ] toggled btwn lock/unlock then held down the menu and center button
[ ] plugged into other usb
is this problem because while i use a mac at home to restore/add songs/etc, i charge it at work on a pc?i would love to know how to fix this as well. its happened twice to mine now, and i fixed it the first time by resetting the iPod, but it isn't working this time
-
Iphone5 home button and lock button unresponsive
i pluged my iphone 5 in to my computor to back up my data and found that my lock button and home button stopped working and would not alow me to get but to home screen or turn the phone off. if i restore my phone how will i loose the films i was trying to down load from itunes before it happened. due to my phone not alowing them to be downloaded?
My iPhone5 lock and home button, as well as some of my friends, has stopped working also... I doubt restoring it will help. It started as my lock button not working and it never came back, restoring it didn't help. You're better off visiting an apple store ASAP and getting assistance, possibly a new phone. Back all your stuff up.
-
My Ipod recently wheel and center button stopped working. Help?
I was putting music on my ipod, I ejected it then when i went to unlock it it unlcoked but the center button and wheel will not work. Yes, I have restored again and agian. i have also let it completely die. I know the button is not broken because it will go to home im i hom edown the ceter button and the menu. Helpp pleaseeeeeeee !?
Try restoring...
iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software
If you can't restore the iPod...
Apple - Support - iPod - Service FAQ -
Program with list and select button
Hi,
is there a program module that displays a list and when user selects an item and clicks on some button the program returnes selected item.
I just want to use that kind of program as a template.
Thank you.Hi,
Try this program BCALV_GRID_02
Cheers.
...Reward if useful
Maybe you are looking for
-
Is there anyway you can have pop ups open in another tab rather than a new window? Like FF2 every link that is a pop up just opens up in a new tab rather than a new window like in Safari. Have i missed a setting or can it not be done?
-
New iPad with IOS 6 update cannot connect to apps store?
What would be the fault?
-
Placing image in the background
Hi, I want to place a background image in the main frame, upon which I can place different other components like buttons textboxes etc. (Similar to a webpage having a background and other components placed on it ) Please let me knoe how it can be don
-
I am making my first keynote presentation. I transferred the slides from a power point. I did not use a 'theme' from keynote. Keynote will not let me 'name' the presentation and the 'save as' option will not come up in the menu. What have I done
-
"Missing Media in Motion" warnings in FCP
I recently downloaded a FontManager and installed it and ever since all my Motion files in FCP projects are no longer recognized. When I open the files in EDITOR from FCP they are all there and fonts in place but save and return and I still get the P