Wheel doesnt work

the spin wheel doesnt work but the select, menu,play,->,<- nuttons work

My wheel doesn't work either. Since yesterday. It has been acting strange for a few months now, not responding properly, but I used to be able to get it to function properly again by toggling the Hold button. Now it doesn't respond at all, only the click buttons work. Resetting the ipod doesn't help.
Question: Can it be fixed or is that it? I'd be pretty disappointed with Apple if its not repairable, seeing that I never dropped or handled it wrong.

Similar Messages

Click wheel doesnt work so well

I have had my i-pod mini for a year and a half and had no problems until now. Recently i went to use my i-pod and everything works except for when i press the menu button on the click wheel. I have tried to reset the i-pod but that doesnt work because the menu button doesnt respond. If anyone has any advice it would be greatly appreciated.
Thanks
-Joel

HI Atomicskier,
Welcome to Apple Discussions
Have you tried Restoring it? You might want to look at Knowledge Base Document #60983, which has instructions on Restoring iPod to Factory Settings.
Jon

My classic has started clicking while freezing and now ita stuck on one screen and the wheel doesnt work

Clicking while freezing for a few seconds now its froze on one screen and wheel wont work

I know it sound silly but please try these steps, part of the 5Rs
Can you toggle the Hold switch and make sure, you can see the Red plastic.
Then Reset your iPod - Press the Menu and Center button for about 10 secs till the Apple logo comes ON, then release the buttons.
Good Luck!

Click wheel doesnt work and ipod not recognized by itunes

hi everyone
i have a 1st generation ipod and recently it has not been working. the click wheel does not respond to anyhthing at all...and the ipod is not recognized by my itunes, although it is recognized by the computer. ive tried formatting the ipod through the usb drive and i have tried resetting the ipod...i am unable to restore it as itunes does not recognize it. someone please help me fix this!
thanks

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem or a botched repair job. Take it back to where you got it fixed.

My mouse scroll wheel doesnt work while using firefox, but works with everthing else

when using firefox my mouse wheel will not work in any website, it will work if i open a pdf file

If it's an Acer laptop, there appears to be a bug with the ALPS drivers. See: https://bugzilla.mozilla.org/show_bug.cgi?id=605357

Connected on the screen click wheel doesnt work

a picture of the power cord is on the screen. "connected eject before disconnectin"

HI Atomicskier,
Welcome to Apple Discussions
Have you tried Restoring it? You might want to look at Knowledge Base Document #60983, which has instructions on Restoring iPod to Factory Settings.
Jon

I have only had my ipod a month and the wheel doesnt work properly anymore. the left arrow button just wont work. anyone know how much it will cost to fix it?

All of a sudden I noticed it won't let me go back to restart a song or go back to the previous song. I only got it on Christmas Day, will I be able to get it fixed for free?

US Repair Costs

IPod Nano 4th generation click wheel not working. HELP!

i have the ipod nano 4th generation, and my click wheel doesnt work. I've had my ipod in my coat for a few days without knowing and im wondering if its because of the cold. my computer detects it and it turns on and off perfectly. the ipod is also in a very good condition.

Intermittent problems are only covered if BB can verify them.

Click wheel not working + crashes after lock switch (nano 2 gen)

Hi,
I have an ipod nano 2nd generation for a couple years, and recently it completely stopped working. While it does communicate with itunes no probs, the click wheel doesnt work, and switching lock on/off causes the ipod to reboot. Restoring doesnt help. Any ideas?
As its a pretty old player, the warranty has probably expired, so getting apple to repair it isnt really worth it is it.

How can you reset it if the click wheel isn't
working?
I was able to get it to reset once or twice, but by the time I got the info about REstore, no-clicky
Anyway put your iPod into iPod diagnostics and see if
the clickwheel is working. First, reset the iPod, and
when you see the apple logo, start to hold the select
and rewind buttons.
The only time now I see the Apple Logo is after a restore. The clickwheel doesn't do anything now... not even light up the display when I touch it...
Any other ideas for me to try?

Ipod universal dock and remote doesnt work!!!!!

I'm fairly new to the whole apple and ipod thing, i bought an ipod nano last week and bought a universal dock with remote today (proper apple one), but the menu button on the remote doesnt work(it does on the ipod itself but thats not the point) so i cant go 'back' from an album i'm playing to find another one i want to play. the volume works fine as does the track back and forth and play pause. But my menu button on the remote doesnt work, this is incredibly frustrating!!!!!
Can anyone help?
one more thing it's not a fault with the remote as my brother has a mac mini with a remote which works fine with his, but the menu button again isnt recognised on my dock!

If you read the manual, you'll see that the menu button is for other devices, but not our Nano's. Apple doesn't make this clear on it's website, IMO. Had I known this, I would not have bought a u-dock. Plus, when my Nano is docked, I can't use the lower 1/3 of the wheel, as the Nano sits too low for my fingers to reach. It's going back to the store next week.

Can anyone get the mackie jog wheel to work with adobe audition 3?

I can get the 'scrub' wheel to work in play mode...but not in stop mode..to make fine adjustments.
I read elsewhere that the mackie wheel simply doesnt work with adobe.
has anyone found that to be untrue?

Hi Cornelius,
At the top right corner of the Sequencer is a button that will let you select which MIDI controller devices you wish to enable. You can then select the channel this device is listening on from the MIDI IN dropdown on the track that hosts your VSTi. (The MIDI IN selection is an arrow pointing to the right.) For testing purposes, it may be simplest to select ALL for now.
You should then be able to use your controller to trigger and control the VSTi on that track.
If I've misunderstood your question, please elaborate.
Durin

MSI GF4 Ti-4200 doesnt work with WindowsXP

I can't get the MSI display tools to work - it crashes,
the vbios.dll doesnt load, it also crashes.
the tv in doesnt work ,it crashes
the tv out doesnt work ,it crashes.
all the supplied software also crashes "application has encountered an error and cannot continue. sorry for any inconvenience"
the intervideo software (windvr, wincoder, winproducer) and MSI PVI software all crashes as well.
what's the deal with this stuff? ?(
I have a Dual AMD athlon Tyan thunder k7 motherboard,
MSI Ti-4200-VTD video card and MSI tv anywhere card.
is there any resolution for this?

I'm sorry gfilitti if I don't have my system listed, but I thought my question was pretty simple...
Has ANYONE been able to make the InterVideo WinProducer 2 software, that comes with the retail version of the MSI G4Ti4200-VTD64 card, work successfully under the Windows XP Home or Pro operating system?
If the answer is YES, then I will begin investigating why my system can't.
If the answer is NO, then I only ask for other people's recommendations of what software WILL work in place of that. I NEED those functions to work. That's why I paid extra for the VIVO.
All we've heard so far in this thread are NO votes. I would like to see just how widespread this is. If I can find ONE person who claims it works fine on his/her computer under Windows XP, then my NEXT question would be if they had to do anything different to make it run, or was it just a straight install? Did they add the program patch available from the MSI website? See where I'm going with this?
If you would REALLY like my system details, here ya go...
========================================
CASE - ANTEC SX1000II with 4 internal 8cm fans
POWER SUPPLY - ANTEC 400W "True Power" w/dual fans
MOTHERBOARD - MSI 645E MAX (MS-6547 Ver 2.0)
BIOS - AMI Ver 3.2 (10/21/02)
PROCESSOR - PENTIUM 4 2.0aGHz (Rev/Step 2/4(9) )
MEMORY - 1 Corsair 512MB DDR RAM (Winbond chips)
DISABLED IN CMOS - FLOPPY Controller, AUDIO Device, MODEM Device, Serial Port B, MIDI Port, and GAME Port
AGP SLOT - MSI G4Ti4200-VTD64 - IRQ 16
DRIVER: MSI 31.00
CAPTURE DRIVER - nVidia 1.08
SLOT 1 - Creative SB0090 Audigy Sound Blaster - IRQ 17
DRIVER - Creative 3.0.0.18 9/20/02
SLOT 1 - Creative SB1394 FireWire Controller - IRQ 18
DRIVER - MS 5.1.2535.0 7/1/01
SLOT 2 - NIC #1 D-Link DFE-530TX Ethernet - IRQ 18 (LAN)
DRIVER - REALTEK RTL8139 5.396.0530.2001
SLOT 3 - Adaptec 29160N Ultra160 SCSI Controller - IRQ 19
DRIVER - Adaptec 6.2.0.0 3/19/2002
SLOT 4 - EMPTY
SLOT 5 - MSI SYSTEM D-Bracket
SLOT 6 - NIC #2 NetGear FA312 Ethernet - IRQ 18
DRIVER - Windows XP Pro native driver
NOTE:
NIC #1 is for home LAN
NIC #2 is for Alcatel SpeedTouch External DSL modem
SCSI DRIVES:
ID 0 - COMPAQ (Seagate) ST318451LW, 18GB, 15K RPM
ID 1 - QUANTUM Typhoon Atlas II, 18GB, 10K RPM
ID 2 - Seagate ST39103LW, 9G, 10K RPM
ID 3 - Plextor CD-RW PX-W1219S
ID 4 - Toshiba DVD-ROM SD-M1201
ID 5 - EPSON Perfection 1640SU Flatbed Scanner
ATA/ATAPI DRIVES:
Primary Master - No Connection
Primary Slave - No Connection
Secondary Master - MATSHITA LS-120 Ver F523
Secondary Slave - No Connection
USB DEVICES:
DIAMOND SupraMAX 56K V.92 Model:SUP2920
Generic Flash Memory programmer and other assorted USB devices on occasion.
MONITOR - HITACHI SuperScan Pro 21 w/5-BNC input
========================================
BTW, I would think when investigating a program's FLAT refusal to run, that the MOST important things aren't listed in these signature files. It has to do with what ELSE is running at the same time. Which services are running and which are NOT? What memory resident programs are loaded at boot-up? Any service packs installed? How about any security patches from Microsoft? Which anti-virus software (if any)? Which DirectX version? Personal firewall? Etc., etc.
Granted, the hardware DOES have a factor, but I feel all of these are MORE important factors than the speed or brand of a persons hardware. I look at the signitures more as bragging rights than anything else.
Now, this is just my opinion and may not reflect the feelings of the more sane people around me.
Cheers!

Macbook pro 15" mid 2010 i spilled water on keyboard now it wont power on if the battery is connected and the keys on keyboard doesnt work it works fine with no battery and external keyboard if i order a battery and new keyboard will every else work again

macbook pro 15" mid 2010 i spilled water on keyboard now it wont power on if the battery is connected and the keys on keyboard doesnt work it works fine with no battery and external keyboard if i order a battery and new keyboard will every else work again lik it did before

If you have records that show that you've taken your MacBook Pro in for a year to fix the machine, I would escalate the problem to Apple Customer Relations - unfortunately I don't have a number for Spain.
It would only seem logical to me that if you've been trying to have the machine repaired during the time that the 'recall' was in effect that you should be eligible for a new logic board. But only customer relations will be able to make that call.
Good luck - take the issue as high up the food chain as you can and see what happens.
Clinton

On Safari, ipad connects to the internet. But when in applications such as Keynote, I try to e-mail presentattion it doesnt work.

I am a teacher and have my own iPad with a data plan. We also have a router in teh classroom for wifi, and it has a very strong signal. On Safari, the ipads can connect to the internet. But when in applications such as Keynote and HTML Egg, I try to e-mail presentat. or post website to web, it doesnt work. I tried re-setting the proxies and the router, no luck. Please Help! I am a teacher and want my students to be able to post their websites on to the web, and e-mail themselves and their parents their Keynote Presentations.

Try this. Turn your iPad Off. Then disconnect the power going to the router for 30 seconds or longer. Then replug the power to the router (allow it to initialize) and turn On the iPad. Hopefully everything will connect. If not, see below.
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
iPad Mail
http://www.apple.com/support/ipad/mail/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

I've just installed CS6 creative suite mainly for photoshop CS6. It comes with camera raw 7.0.something, but need something newer to use my canon 6d. When I download camera raw 8.5 and install the raw converter doesnt work anymore, wont even open or isnt

I've just installed CS6 creative suite mainly for photoshop CS6. It comes with camera raw 7.0.something, but need something newer to use my canon 6d. When I download camera raw 8.5 and install the raw converter doesnt work anymore, wont even open or isnt available anymore in the plugin list. Tried to reinstall everything for a few times, but nothing helps.

When I search for updates the raw converter doesnt get update automaticly. Frustrating, is costing me the whole morning.

Wheel doesnt work

Similar Messages

Maybe you are looking for