When a new Mac mini?

I am looking forward for Apple to update the Mac mini. I cannot buy an iMac as I don't need a new monitor (already own a 20" Apple Cinema Display) and I cannot spend 2000+$ to get a Mac Pro, as my needs are not high enough to justify the buy.
The Mac Mini is effectively the only "standard" desktop product from Apple.
I wonder, when will this super machine be updated with new hardware, possibly a dual processor option (but there might be a heat dissipation problem, I understand - but what about a quad-core? - the same applies to the iMac, BTW), Blu-Ray support, bigger drives and better graphics card?
I would update my Mini with this new machine if it ever came out.
Apple - could you please update the Mini or come out with a new desktop product that doesn't have an in-built monitor?

Since Apple Discussions is a user-to-user support resource, no-one can really tell you what Apple's plans are for the mini - or indeed any other Apple product. The only people who do know Apple's plans are restricted by non-disclosure agreements and are thus not able to provide any information.
All one can reasonably assume is that as and when the Mac mini is updated, it will remain the entry level system with the most basic specification of any Mac system. As such, it is not likely to gain top-end features, or components such as Blu-Ray which are not yet present and established in the rest of the range. You can really only assume that barring a radical reshaping of the product range as a whole (of which there is no indication) the Mac mini will gain only incremental performance enhancements.
It seems to me that it would be best to make purchasing decisions based on products that exist at present - or to wait as long as possible to make a purchase if the current product range is not sufficient for your needs.

Similar Messages

Singing the praises of the new Mac Mini Server

I've been running Maya (a 3D modeling and animation application) on a mid-2010 17" MacBook Pro: dual core 2.66GHz i7 processor, 8GB of RAM. It's done quite well, even when rendering frames of animation, but I knew I needed to speed things up a bit when I'm rendering out longer animation clips at reasonably high resolution. When the new Mac Mini refresh kicked in I decided to take the plunge and pick up the new Mini Server as an extra render node.
Wow, was that a great decision.
With the same 8GB of RAM, but adding quad core i7 plus Sandy Bridge, it screams. I just ran a disributed render test: 10 seconds of animation at 24 frames per second, 1080p HD. The Mini Server easily rendered three frames for every one the MBP churned out. That means my overal render time has been cut to roughly 25% of what it was before.
If ever you wondered what that extra horsepower means in actual useage terms, now you know.

Any time. I have some real numbers:
240 frames, 1080p resolution.
MacBook Pro alone: 4 hours, 17 minutes.
With Mac Mini Server added (distributed render): 1 hour, 3 minutes.
Yeah, I'm pleased.

New MAC Mini w/OSX Lion - will not boot from USB or external optical drive when attempting to use BootCamp to install Windows 7?

The University recently purchased 6 brand new MAC minis for deployment in classrooms I support. I am attempting to create a dualk--boot environment comparable to our existing computer systems, only these machines wil be running MAC OS X Lion and Windows 7. After following the procedures outlined in the BootCamp on-screen prompts, and attempting a few techniques I found in the tech support user-base, I am still unable to get the MAC mini to boot up from the USB flash drive, or from an external optical drive, so that I can complete the installation of Windows 7. When using the Boot option key at start-up, all devices are displayed suggesting that they are being properly recognized, however the computer boots to a black screen with an error message indicating that "No bootable devices are found - press any key to continue." I am able to boot into the computer's internal drive, but not from any external devices. I fully expected that the semi-automated BootCamp procedure properly prepares the USB device for booting, and for installing the Windows 7 OS.

Meh, with the price they take for a drive in Denmark, I don't think it's worth it... They take around 160 $ for the drive (that's the cheapest MacBook drive I could find), and I am not even sure that's the one I need.

I have a new Mac mini and are using an Acer monitor. Unfortunately, the Acer will not show any image on a startup from cold. It does however work completely correctly when restarting from 'sleep' condition. Can anyone help? Thanks in anticipation.

I have a new Mac mini- changed from Windows XP. I have a peculiar problem. I use an Acer monitorwith the Mac which works fine when the Mac is 'un-sleeped'. But, if I have shutdown the Mac the Acer does not recognisethe start up - at least it shows nothing on screen. When I have shut down - nowknowing the problem, I use an old Samsung monitor to cope with the start up -it does so fine - and then put the Mac to 'sleep', then change monitors andrestart the Mac - the Acer is now fine. I am using the same cables for theSamsung and the Acer. The Acer had no problems with my old Windows system -from sleep or shut down. I really do not think there is anything wrong with theAcer - could it be some sort of recognition problem? Please can anyone assist.Donald Picton

I posted the same question a day ago with no response. I'm using an Acer x193w. You actually don't have to switch monitors to get it to work. Just make sure you turn off the monitor after shutting down the Mac mini (actually push the power button on the monitor, not just let it go to sleep). If you turn on the monitor (push the power button on the monitor), then power up the Mac mini, the monitor is recognized. The issue didnt exist with Snow Leopard for me. It only started after I started using Lion. Hope this issue gets fixed In a future OS update.

I'm attempting to transfer files, address book, etc from an external hard drive to my new Mac-mini using migration assistant. The external drive is showing up on my desktop but Migration Assistant is not seeing the drive when searching for devices

I'm attempting to migrate files, address book, maile, etc to my new Mac Mini using an external hard drive and Migration assistant. I followed the instructions on using Migration Assistant to do this but Migration Assistant is not seeing the external drive, which is displayed on my desktop

I've been chasing this problem all afternoon. I had to reformat my internal drive on my MBP and reinstall Mountain Lion Start up assistant wouldn't see my extrnal drive with the Time Machine files on it. After many tries, I skipped the restore there and let the system boot. I could see my external drive from Finder and the files looked OK. I was told to use Migration Assistant and it had the same problem.
I saw a hint on one of these posts that the icon that you see and is label Macintosh HD is actually your backup disk and it is telling you that it has a copy of your internal Macintosh HD. I went ahead and told it to continue and it started to restore my apps, settings, and documents. It's been going for a couple of hours, and is close to being done. I expect to see my old system restored when it is finished.
Wish that Apple would put some type of note that it is seeing the backup. That is most confusing and seems to be a problem for lots of users.
It's been a month or so since your post Did your get it to work?

When I plug a LaCie external hard drive into my new Mac mini, [os 10.9.1], to use with Time Machine it effects the performance of my internet and email. Turn off Time Machine and unplug the hard drive and the internet and email are working normally again

When I plug a LaCie external hard drive to work with Time Machine into my new Mac mini, [OS 10.9.1] it drastically effects the performance of the internet and email, turn off Time Machine, unplug the hard drive, internet and email go back to normal. Why?

Maybe:
http://www.macobserver.com/tmo/article/usb-3.0-hard-drives-can-cause-wi-fi-inter ference

I just got a new Mac Mini, and now when I try to import photos into Lightroom, iPhoto try to load them first, then Lightroom can't find the files. Big problem. What to do?

I just got a new Mac Mini, and now when I try to import photos into Lightroom, iPhoto ties to load them first, then Lightroom can't find the files. Big problem. What to do?

Simple:
File -> Export to get your photos out of the iPhoto Library. In the Export dialogue you can set the kind to Original and you'll get back exactly what you put in.
Apps like iPhoto2Disk or PhotoShare will help you export to a Folder tree matching your Events.
Once exported, you can then trash the iPhoto Library - just drag it from the Pictures Folder to the trash and empty it.
After that, if you're entirely neurotic about it, just put the iPhoto app in the trash and empty it.
Regards
TD

My new mac mini downloaded a firmware update. I saw this in apps but gave an error when launching. Now what?

Yesterday I received a new mac mini (actually, a refurbished one that was originally released in July, sold from Apple). It downloaded a bunch of stuff when I did the software update, including an EFI Firmware update for the mac mini.
As far as I can tell everything ran just fine. However, I noticed in my applications folder (possibly under "utilities" though I may be wrong), an item with the circle/slash through it. It was the firmware update. I tried to open it and I received a message that the application could not be opened because of a problem when downloading it.
I deleted the file, hoping the software update would catch it again, no luck.
This is a new system and I'm hesitant to start deleting receipts, library files, etc., on my own.
I did unplug it and re-boot. No change.
I checked for firmware updates and looked at my system info and it looks like I have the current version.
I tried to manually download the latest firmware update for my system and it told me that this software wasn't for my system, although I'm sure I downloaded the right file for my system.
Why would that app have the circle/slash through it but looked like it may have run based on my system info?
Should I do anything else at this point or just leave it alone?
Thanks.

I have a Mac Mini (mid-2011) with that same app circled out. I just left it as is in Utilities since I have no idea what it is and it's not hurting anything. Unfortunately, it won't show up in Installed Software.
You said you deleted the app file from Utilities. Is the Mac mini EFI Firmware Update.app still in your Trash? If so, why not just put it back and not worry about it?
As far as I know the firmware is installed. Check your System info by clicking  -> About This Mac -> More Info....-> System Report. Check the Hardware Overview and the Boot ROM Version:. It should be the same as my Mac Mini below if the EFI 1.3 firmware was installed.
Here's the link where the download resides. Note that it's for mid-2011 Mac Mini.

I am getting Error 150:30 when I launch CS4 on a new Mac Mini running OSX 10.9.3

I am getting Error 150:30 when I launch CS4 on a new Mac Mini running OSX 10.9.3.
The application was restored from a backup using Apple Time Machine.
I would reinstall the applications, since I have the original disks, but alas, the Mac Mini has no external drive.
Any ideas?

CS4 is untested and unsupported under 10.9.x
That said, you should uninstall everything run the cleaner tool and then download the CS4 installer and try it again.
If that doesn’t do it, you’re on your own.
Cleaner tool: http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
Download link for CS4: http://helpx.adobe.com/creative-suite/kb/cs4-product-downloads.html

Which adapter do I need to connect my new Mac Mini to my old Apple Cinema HD monitor?

I have a perfectly good Apple Cinema HD monitor (model M8536), but it has an ADC connection, and my new Mac Mini isn't compatible with it. I've bought a new screen for the Mac Mini, but there are going to be times when I need to run two screens in parallel on the Mini. Can anyone tell me which adapter I need to do this? I've looked at the Apple DVI to ADC connector (M8661LL), but I'm not sure this is what I need, and they're quite pricey, even second-hand on eBay, so I don't want to make a mistake!
Thanks!

Thanks, dwb ... unfortunately I don't think I'd get very much for my old display, it's so old (> 10 years)! But it still works perfectly, and I'm loathe to throw it away ... and there are going to be times when I need the two screens, so even though I've bought a new 27" Philips monitor, it would be good just to buy an adapter to hook up the old screen ...

Using An ASD LCD display with a new Mac Mini

I want to utilize a 17" Apple Studio Display with my new Mac Mini.
Does HDMI support the 35-pin Apple Display Connector (ADC)?
It would require an adapter with female 35-pin on one side and a male HDMI (DVI) on the other. The Apple DVI to ADC adapter doesn't work with the Mac Mini HDMI port.
If two adapters are needed they must have the correct gender connections.
Thanks.

Your correct, you would need an Apple DVI to ADC adapter, And ether mini display port to DVI OR HDMI to DVI adapter. (just a question of witch port you want to use)
Apple DVI to ADC adapter when they were first released cost about 120; now they're kind of rare and harder to find. Online they can go for 200 dollars. so 120 to 200 dollars to make your display work; and displays don't last for ever they have parts that will break down. Older displays have a light bulb inside them; witch burn out just like all the other light bulbs in your house.
Also DVI to ADC adapters can some times give you blurry images and or text.
For 120 dollars you can buy a generic brand 19" LCD. That 19" LCD would have better contrast ratio, brightness, and refresh rate then the old 17" monitor. (and it would have a warranty) Or for 200 dollars you could buy 23" monitor.

HDMI to TV as Display for New Mac Mini DOESN'T WORK

I bought a new Mac Mini and was told I could us HDMI to my TV as display.   I was using this TV as display for older Mac Mini (VGA) and for a Windows PC, and DVD via HDMI.     TV is one year old.
The Genius at the store who sold me the new mini said all I needed was an HDMI cable.   Which I purchased.
The screen comes up for the Setup Assistant but as soon I select continue is goes to gray, mixed color scanning garbage mode.    If I turn the TV off and back on, the screen returns (now at the next prompt in the setup assistant) but again it goes gray after hitting continue.    Unusable, CANNOT set up my new purchase.
Unfortunately, the DVI to VGA adapter on my old mini is different and doesn't mate to the HDMI to DVI adapter that ships with new MacMini, so I can't test VGA.   The old DVI to VGA has extra pins not on the new one.
My purchase is not usable and is extremely poor.   Buyer beware I guess.

I have been using MacMini's for commercial digital signage/video conferencing gateway usage for sometime now, they all have HDMI output, about one third are on Lion the others still on Snow Leopard, here's what I have found.
Toshiba & LG tv's are generally reliable, Samsung and Philips generally are not, Panasonic, Sony, Sharp & Viewsonic all work, somtimes with a bit of work from me.
Cables are important (always look for compatibility with HDMI revision 1.3 or greater (1.4 preferred), don't waste your money on exotic brands, adhere to the distance limitations, I generally send the HDMI signal wirelessly (cost of labor to add wiring to an existing space can be very high) so am limited to less than 50ft, same as with a wire.
READ THE TV MANUAL, find out what HDMI choices your tv possesses, is there a 'parallel' audio input available for the times when your signal origin is a MDP or DVI.
Some TV's just don't work well, cut your losses and get another when faced with this issue.

TS4456 New Mac mini and older wireless keyboard connect, but don't pair

In setting up my brand new Mac mini, the wireless mouse paired with no problem, but I'm having trouble with the keyboard. I am using an older mouse and keyboard from my previous mini, which is completely shut down. The keyboard shows as being connected to the computer, but when I enter the code and press Return, the code disappears and nothing else happens. After a while the code reappears and I repeat the process with the same results. After several attempts, nothing else happens. I've tried rebooting twice, checked the keyboard batteries, made sure the keyboard light is blinking to show it's discoverable, but I can't move past this screen. I don't know what else to try. Please help!

Hi, it isn't paired to another device is it?
Might see this...
http://www.christopher-parsons.com/blog/technology/solved-bluetooth-devices-not- connecting-to-osx/

New Mac Mini and Repairing Permissions

I've been having trouble with my Mail program and thought I would repair permissions to see if that would help. I ran disk utility from my internal hard drive and ran repair permissions. Apparently it found several permissions to repair, so I thought I would run repair permissions again and the same list appeared. Running a third time and the same list appeared again.Do these permissions ever get repaired? What do I do from here? Should I repair permissions after booting up off of my original system disk? This Mini is only a couple of weeks old and I'm already having problems with Mail and repairing permissions.
rskover

Thank you Tim but the computer is packed back waiting for TNT to take it back to Apple. I don't have time to play with permissions, the permissions are OK in the old computer.
This is what may have been your problem. The permissions on your old computer may not have matched the new computer. I think you gave up before the penny dropped.
They sell the computers very expensive and I think they would have to improve quality.
I am unsure how that can be one of your gripes as when the cube came out it was way overpriced in comparison to their other desktops. That did not stop your or I getting one then.
Your issue was a software problem not a hardware problem so no matter what kind of mac you had it would have needed troubleshooting.
The quality of the new mac mini far exceeds that of the cube. Try playing 1080P high definition media on your cube, or even 480P for that matter. Try outputting 5.1 surround sound from your cube without the addition of a firewire audio interface.
I know how frustrating it can be when something just does not seem to work. I have encountered this a few times in my work. However sometimes I just have leave it come back with fresh eyes and try other approaches and I succeed.
What you need to appreciate installing an upgrade should be planned for any eventuality. In business upgrades are scheduled to have the minimum impact on the workplace. That being said I have worked 48 hrs solid over a weekend getting systems up for a monday morning. They are not always straightforward.

New mac mini and noisy dvd drive

Any time I have a DVD in my brand new mac mini, from commercial DVDs to trying to author a blank DVD, I get the dreaded chainsaw sound that plagues anyone who has owned an xbox 360. Has anyone else suffered with this with their new mac mini or should I send it back to apple

I should have been a little more specific. This happens usually when I try and do slightly disc intensive tasks, such as burn a disc, import a disc to itunes, and I can even get it to sound when I leave a disc in the drive, turn the computer off, and as it's booting it will make the grinding noise. I first thought that the computer couldn't lay on it's side as that's when I first noticed it (sort of like the wii on it's side because this fits my setup), but it makes the same noise whether I have it on it's side or not. This is also not disc specific, I can re-create the noise with different discs, DVDs, CDs when importing to itunes. Guess I'll be taking it to an iTunes store to get it checked out.

When a new Mac mini?

Similar Messages

Maybe you are looking for