When a third party program creates a new Google calendar event using a http link I cannot click the save button in Firefox 9.01 or 10b2.

I use a TV listings program called DigiGuide. This has a script that opens a new Google Calendar event page in my browser for a specified TV program with all fields already completed. I then just have to click the SAVE button on the Google Calendar site to save the event - but since updating to 9.01 from 8.xx this button and others (Discard, Search) has no effect, although the cursor changes when over the button as if it recognised a link. Opening the same page in Chrome works fine. I have also noticed that Calendar's other buttons (e.g. next/previous period) can stop working on the main Calendar page, which I have as a pinned tab - in this event navigating away from Calendar and back again regains that functionality. The issue persists in Firefox 10b2.

Further investigation reveals this only happens when the event is created from within WP native calendar app and disappears when I make an edit to the event in any other calendar client including Google web. So a more appropriate description of the problem would be:
"Native calendar app keeps subtracting 1h off a Google calendar event on EVERY edit"
Create an event at 2013/07/17 15:00 in WP native calendar app. Result: Event shows as 2013/07/17 15:00 in the calendar app for a few seconds, then updates itself to 2013/07/17 14:00.
Edit the event title and save in WP native calendar app. Event time moves by -1h again to 2013/07/17 13:00.
Edit the event title in Google web calendar.
Subsequent edits in WP native calendar do not mess up the time any longer. If I fix the time to what I originally intended (2013/07/17 15:00) in WP native calendar app, it stays there and shows correctly in all previously mentioned calendar viewers.
I just learned that Lumia 925 was released with GDR2 update pre-installed. This update is only now being made generally available. If the issue is secific to the CalDAV implementation in GDR2 rather than specific to my phone only, this would make a lot of angry people. I hope I'm wrong on this though as it's an extremely frustrating problem.

Similar Messages

I tried to create a new google calendar in ical, but they did not show up, I tried this several times. Now when I sync my iPad via iTunes all these failed attempts are showing up under the ical sync list in iTunes, how can i clear them from this list?

I tried to create a new google calendar in ical, but they did not show up, I tried this several times.
Now when I sync my iPad via iTunes all these failed attempts are showing up under the ical sync list in iTunes, how can I clear them from this list?

See https://bugs.downthemall.net/ticket/2147
Google Search Bug
Reported by: openid:nathan wride Owned by:
Priority: major Milestone:
Component: Polish/Usability Version: 2.0.10
Keywords: Google search instant save bug Cc:
Operating System: Windows
Description
Hi Guys
I have found a bug/annoying thing that occurs frequently on google. When searching, DTA trys to download the search...
I'll try to attach a screenshot.
Attachments
[https://bugs.downthemall.net/attachment/ticket/2147/Screenshot.png Screenshot.png] Download (113.0 KB) - added by openid:nathan wride 4 weeks ago.
The screenshot that shows the bug.

HT204053 I was trying to download a free app from app store when I was asked to agree a new terms & conditions, after I agree a message of " cannot reach the i Tunes store" whenever I try to log on app store

I was trying to download a free app from app store when I was asked to agree a new terms & conditions, after I agree a message of " cannot reach the i Tunes store" whenever I try to log on app store

Hi,
Thanks for your suggestion. I tried to "reset" the device, but it was still no go.
Thanks & regards.

Best way to Restore Database to create a new Database having different dependent objects like linked server names in the procedures

Hi All,
Am creating a new test server by cloning the production server. Creating Dbs by restoring the production backup but wondering is there any best way to update the linked server names in open query of few SPs other than manual checking and updating.
Thanks,
Swapna

It will not update the stored procedure rather it generates the scripts. You can validate and execute the script later.
Try this link
http://www.ideosity.com/ourblog/post/ideosphere-blog/2013/06/14/how-to-find-and-replace-text-in-all-stored-procedures
--Prashanth

How can i create a new and tableless database using database configuration

How can i create a new and tableless database using database configuration

How can i create a new and tableless database using database configuration
Just don't install the sample schemas. See the installation guide
http://docs.oracle.com/cd/E11882_01/server.112/e10831/installation.htm
Using the Database Configuration Assistant
When you install Oracle Database with the Oracle Universal Installer, the sample schemas are installed by default if you select the Basic Installation option. Selecting the sample schemas option installs all five schemas (HR, OE, PM, IX, and SH) in the database. If you choose not to install the sample schemas at that time, you can add them later by following the instructions in section "Manually Installing Sample Schemas".
Choose a custom install and don't install the sample schemas.
All other schems/tables installed are REQUIRED by Oracle

When a website launches a new window to enter information, Firefox no longer automatically closes the window when you click the submit button. Why?

For example, when I create a message in my autoresponder service and want to attach an image a new window opens up so I can enter the details of the image (url, position, alt text). When I click the Save button, the information is captured but the window remains open and I have to manually close it.
Firefox used to close the window automatically.

YES!! Thank you jscher2000! You sir are a legend. Thanks for this, changed the newtaburl in about:config, totally worked. Nope, never saw it happening! Speedy machine this one :P Yep, that change completely sorted the issue, just opened about 741 new tabs through the shortcut on my mouse just to celebrate. Thanks guys who helped, no thanks those who didn't.

Problems syncing new google calendar delegates to iPhone 3

I got a iPhone 3 a few months ago and had no problem setting up calendar so that all of my google calendar delegates are visible in both iCal and on my iPhone. I haven't had any problems with getting events to update on all of my calendars regardless of which program I use to create/ edit the event, until now. I recently created a new google calendar delegate. I can access the delegate in both iCal and on google but for some reason I can't get the new delegate to sync to my iPhone. I've tried to edit the settings in all of the programs, i've edited events on the new calendar on google on my iPhone, on my computer and on iCal but I still can't get it to show up in calendar on my iPhone. Any suggestions on fixing this problem?

I didn't know it was possible. How do I find an option to subscribe to a new calendar from within the iPhone? I've always subscribed via synching.

Adobe reader opens "save as" box when clicking on save button rather than saving in the same file

Hi everybody,
I have a fillable PDF form designed in Livecycle designer and it is reader extended. When I fill that form on MAC it let me fill and save the form as many times as I like. Everytime I make any change I just click the save button it saves changes in the same form. BUT is is behaving differently on Windows. After filling the form out when I click on save button it opens up "Save as " dialogue box to save a new copy with those changes. I have Adobe reader XI and Adobe Acrobat XI installed on windows. I know I can do that with Acrobat but I want that in reader for users who dont have acrobat.
Please help me.....
Thanks

What are you filling out the form with on the MAC?

When the user Clicks the Modify button remaining Buttons should be dispayed

Hi experts,
                     In my application I have 3 fields and three buttons(Modify ,save and cancel)...The 3rd field is DATE field ...i have to display only MODIFY..and the remaining 2 buttons should be disable mode at Runtime.
1) when the user clicks the MODIFY button....then only other two buttons should be visible in my current application.
2) when the user clicks the SAVE button....the 3rd field should displayed with current date or System date.
3)whenever the user modify the details using modify button...meanwhile if the user clicks the cancel button...all three fields goes to Read only mode...
Thanks In advance for all.
how can i write the logic for all these 3 requirements...can anybody plz help me...
Regards,
Praveena..
Edited by: s.praveena on Jun 14, 2010 7:36 PM
Edited by: s.praveena on Jun 14, 2010 7:39 PM
Edited by: s.praveena on Jun 14, 2010 8:01 PM

Basically you want to handl the visibility and read-only properties of the UI elements at runtime.
To handle visibility property create a context attribute of type WDUI_VISIBILITY and bind it with the UI element's visible property.
in MODIFY action handler set this context attribute to IF_WDL_CORE=>VISIBILITY_VISIBLE to make it visible
                                                                                IF_WDL_CORE=>VISIBILITY_NONE to make it invisible.
Similarly to handle the read-only behaviour, create the context attribute of type WDY_BOOLEAN and bind it with the readonly property of the UI element.
and in action handler assign a value to the context attribute. ABAP_TRUE to make it readonly
                                                                                ABAP_FALSE to make it editable.

Third party SO creating new PR after rejection is removed...

Hi ,
Sometimes due some user mistake, rejection is set in SO & this deletes the corresponding third party PR. But third party PO is already created w.r.t this PR . Now if user removes the rejection in SO, it creates a new third Party PR or new item in the same PR.
this make it necessary to delete the old third party PO & create new PO w.r.t the new PR. So i wanted to know if there is a way when rejection is removed from SO, it does not create a new PR but it simply undelete the earlier third party PR?
Thanks for your help.
Regards,
Anubhab

Thanks for sharing the info.
Check IMG - SD - Basic Function - TOR for Maintain Requirements For Purchase And Assembly Orders
Still I really suspect, whether that will be able to help you. As per my experience, if your all info / determination are correct, it will automatically create PR in background on same. So, this initially avoid determination of plant (standard way). but it created lot of confusion, so we used exit.
I would still suggest, to keep it simple, use exit for you requirement
Thanks & Regards
JP

HT4718 i need to install a fresh copy of OS X onto my macbook pro 13. i did erase the old partition "macintosh hd" & now when i am trying to create a new partition, it shows "partition failed..couldnt unmount disk"...pls help !!

i need to install a fresh copy of OS X onto my macbook pro 13. i did erase the old partition "macintosh hd" & now when i am trying to create a new partition, it shows "partition failed..couldnt unmount disk"...pls help !!

First of all, I have to ask, why to you "need" to install a fresh copy of OSX?
This may mean that your hard drive is failing, so hopefully you have a backup.
I'm assuming you were in your recovery partition when you did this.
I would, from the recovery partition, repair your hard drive and permissions.
When to Run First Aid in Mountain Lion's Disk Utility - For Dummies
And then try to create the partition again.
If that doesn't work, you have a few options:
Try a third party utility like DiskWarrior or TechTool which may be able to repair your hard drive:
DiskWarrior 4 - The Disk Utility for Mac Disk Repair, Mac Directory Repair, Mac Disk Recovery, Mac Data Recovery or Techtool Pro 7
Try internet recovery, perhaps erase the entire hard drive and reinstall ML.
If nothing else works, then I'd replace the HD and start over.

Executing system command (third party program) from extend script without showing console on windows

I am using following code on mac:
app.system("/path/to/external/executable &");
It runs external program in background (without showing console/terminal).
On windows I tried many things like:
app.system('start "" "/path/to/external/executable"');
app.system('start "" /B "/path/to/external/executable"');
And I was also trying to solve it using visual basic.
Unfortunately everytime I use app.system(...) then windows console is showed on the screen for half of the second, then it disappears and progrm runs in background. Is it possible to avoid showing console window? Maybe there is another way of executing third party program?

You can try to save a vbscript :
Dim objShell
Set objShell = WScript.CreateObject( "WScript.Shell" )
objShell.Run("""\path\to\external\executable"""), 0, True
Set objShell = Nothing
than just execute it from javascript:
var vbFile = new File("path to your vbscript file")
vb.execute();

Import settings of third-party programs

When Tiger is being clean-installed, the installer asks me whether I want to import settings from another volume. Does the installer of Tiger import settings of third-party programs in addition to the settings of the OS?

"Does the installer of Tiger import settings of third-party programs in addition to the settings of the OS? "
Yes, as all application preferences are stored within the user's home folder.

Installing a third party program on macbook air

Can someone please tell me how to install a third party program from a CD onto a Macbook Air?
I've spent the last 8-10 hours trying to figure this out and I keep going around in circles. The program I want to install is on my desktop. I've tried Migration Assistant but it wants to install =all= my applications rather than just one. I've tried loading the CD onto a flash drive but when installation starts I keep getting a message to install the program CD, which is residing on the flash drive and which Air apparently cannot read. I've tried CD/file sharing, but the Air does not have an option for CD/DVD sharing. There is no Firewire connection on the Air so that option is out. I've been to two electronic and neither has the cables for connection my desktop to my Air. Apple support is no help.
Is it really supposed to be this difficult?

HI andouille07,
What application are you trying to install.
Have you tried fallowing this article?
Enable DVD or CD Sharing
http://support.apple.com/kb/ht1131
Enable DVD or CD Sharing should be performed on your desktop.
while "Use a shared DVD or CD:" should be on the air.
If you do not see the remote disk on the air. make sure both your desktop and macbook air are connected to the same network over wifi.
If that dose not work you could try making a disk image, and then coping the disk image to the flash drive and bringing the flash drive over to the other computer. assuming your desktop is a mac.
http://www.ehow.com/video4978318create-disk-image-mac-os.html explains how to make a disk image.
you can always purchase the external super drive as well.
http://store.apple.com/us/product/MB397G/A

Exporting video to 8k from premiere or third party program for youtube.

Hello all,
i have been uploading video that has been scaled to youtube in 8k and it processed in 8k! the problem is that with some video codecs (shadowplay) i was using to lightly capture a game scene is not working.
ShadowPlay encodes video using H.264 codec and outputs in MP4 format. It's compatible with popular players such as Windows Media Player, VLC, and YouTube.
i have tried exporting the video matching the sequence settings and even with tons of others.
after that i usually take that exported video and export it again through this program.
ClipToolz Convert V2 Home Page
this program scales and compresses the video in .h265 at 8k and then i upload it to youtube most of the time it works. but for the life of me this last video will not process in 8k on youtube.
so youtube processes and shows done but only has up to 360p even if i leave the video up on youtube for 1 week it will not process up farther than 360p..
the problem i come to you today with is when processing on youtube the video processed for upload to youtube in 8k only work on any other video even if i download one and do a test upload in 8k it processes in 8k.
im thinking there is something wrong with the initial filmed video or something.
SO i uploaded to youtube the raw video that i captured before the first premiere export. and guess what?
the video posted and processed in its native 2k resolution that it was filmed in..
i would like to know if you know any way possible to upload in 8k so it processes or any third party program i can use to make it work.

I understand this might be a good technical exercise but how do you view 8K content?

When a third party program creates a new Google calendar event using a http link I cannot click the save button in Firefox 9.01 or 10b2.

Similar Messages

Maybe you are looking for