When accessing shared folder - 'You might not have permission to use this network resource" .. A device attached to the system is not functioning

On a Windows 2008 R2 server that had been working fine, all of a sudden some shared folders became inaccessible. Clicking on them returned the following: "<Folder> is not accessible. You might not have permission to use this network
resource. A device attached to the system is not functioning."
If I create another share with a different name for that same folder, it works fine. If I delete the original share then recreate it with the same name, I get the same error. However, if I right click on the problematic share and select 'map
network drive' that works. So this would not appear to be a permission issue.
I discovered this problem because the path for mapping the home folder as a property of their AD account stopped working.
I have tried most of the common things found on the internet. I've tried accessing via IP, same issue. While I only have a couple 2003 servers, those can access this resource.
At this point, I'm pretty much out of ideas. Any help would be appreciated. I also have some reports of potential issues with some printer mappings too which I will have to investigate in the morning.
If anyone has a solution to this I would be extremely grateful. Thank you.

Hi,
Can you access the shard folder locally? Is a specific server cannot access the shared folder? Please try to Boot your server in Clean Mode to check if some third-party software cause the issue.
How to perform a clean boot in Windows
http://support.microsoft.com/kb/929135
Best Regards,
Mandy
If you have any feedback on our support, please click
here .
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

Windows Server 2008 R2 - You might not have permission to use this network resource. The request is not supported.

Hello !
I have a server with Windows Server 2008 R2 (AD, File Server, DNS Server and DHCP Server) that not access network share other Domain Controller.
Well, is very crazy.
I view network shares by network computers and devices,
but not \\domain_controller or \\IP_domain_controller.
I execute ping for succeed for all servers.
Follow error bellow:

irectory Server Diagnosis
Performing initial setup:
Trying to find home server...
* Verifying that the local machine SRVMTZDC01, is a Directory Server.
Home Server = SRVMTZDC01
* Connecting to directory service on server SRVMTZDC01.
* Identified AD Forest.
Collecting AD specific global data
* Collecting site info.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=shcorp,DC=local,LDAP_SCOPE_SUBTREE,(objectCategory=ntDSSiteSettings),.......
The previous call succeeded
Iterating through the sites
Looking at base site object: CN=NTDS Site Settings,CN=SAO,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Getting ISTG and options for the site
Looking at base site object: CN=NTDS Site Settings,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Getting ISTG and options for the site
Looking at base site object: CN=NTDS Site Settings,CN=CWB,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Getting ISTG and options for the site
Looking at base site object: CN=NTDS Site Settings,CN=POA,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Getting ISTG and options for the site
Looking at base site object: CN=NTDS Site Settings,CN=RIO,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Getting ISTG and options for the site
Looking at base site object: CN=NTDS Site Settings,CN=VIX,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Getting ISTG and options for the site
Looking at base site object: CN=NTDS Site Settings,CN=SSA,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Getting ISTG and options for the site
Looking at base site object: CN=NTDS Site Settings,CN=FOR,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Getting ISTG and options for the site
Looking at base site object: CN=NTDS Site Settings,CN=BHZ,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Getting ISTG and options for the site
Looking at base site object: CN=NTDS Site Settings,CN=BSB,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Getting ISTG and options for the site
Looking at base site object: CN=NTDS Site Settings,CN=RCF,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Getting ISTG and options for the site
Looking at base site object: CN=NTDS Site Settings,CN=BEL,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Getting ISTG and options for the site
* Identifying all servers.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=shcorp,DC=local,LDAP_SCOPE_SUBTREE,(objectClass=ntDSDsa),.......
The previous call succeeded....
The previous call succeeded
Iterating through the list of servers
Getting information for the server CN=NTDS Settings,CN=SRVDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=SRVDC05,CN=Servers,CN=SAO,CN=Sites,CN=Configuration,DC=shcorp,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=SRVDC06,CN=Servers,CN=CWB,CN=Sites,CN=Configuration,DC=shcorp,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=SRVDC13,CN=Servers,CN=POA,CN=Sites,CN=Configuration,DC=shcorp,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=SRVDC07,CN=Servers,CN=RIO,CN=Sites,CN=Configuration,DC=shcorp,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=SRVDC08,CN=Servers,CN=VIX,CN=Sites,CN=Configuration,DC=shcorp,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=SRVDC09,CN=Servers,CN=SSA,CN=Sites,CN=Configuration,DC=shcorp,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=SRVDC12,CN=Servers,CN=FOR,CN=Sites,CN=Configuration,DC=shcorp,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=SRVDC04,CN=Servers,CN=BHZ,CN=Sites,CN=Configuration,DC=shcorp,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=SRVDC10,CN=Servers,CN=BSB,CN=Sites,CN=Configuration,DC=shcorp,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=SRVMTZDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=SRVRCFDC11,CN=Servers,CN=RCF,CN=Sites,CN=Configuration,DC=shcorp,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
* Identifying all NC cross-refs.
* Found 12 DC(s). Testing 1 of them.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\SRVMTZDC01
Starting test: Connectivity
* Active Directory LDAP Services Check
Determining IP4 connectivity
* Active Directory RPC Services Check
......................... SRVMTZDC01 passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\SRVMTZDC01
Starting test: Advertising
The DC SRVMTZDC01 is advertising itself as a DC and having a DS.
The DC SRVMTZDC01 is advertising as an LDAP server
The DC SRVMTZDC01 is advertising as having a writeable directory
The DC SRVMTZDC01 is advertising as a Key Distribution Center
Warning: SRVMTZDC01 is not advertising as a time server.
The DS SRVMTZDC01 is advertising as a GC.
......................... SRVMTZDC01 failed test Advertising
Test omitted by user request: CheckSecurityError
Test omitted by user request: CutoffServers
Starting test: FrsEvent
* The File Replication Service Event log test
......................... SRVMTZDC01 passed test FrsEvent
Starting test: DFSREvent
The DFS Replication Event Log.
Skip the test because the server is running FRS.
......................... SRVMTZDC01 passed test DFSREvent
Starting test: SysVolCheck
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... SRVMTZDC01 passed test SysVolCheck
Starting test: KccEvent
* The KCC Event log test
Found no KCC errors in "Directory Service" Event log in the last 15 minutes.
......................... SRVMTZDC01 passed test KccEvent
Starting test: KnowsOfRoleHolders
Role Schema Owner = CN=NTDS Settings,CN=SRVDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Role Domain Owner = CN=NTDS Settings,CN=SRVDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Role PDC Owner = CN=NTDS Settings,CN=SRVDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Role Rid Owner = CN=NTDS Settings,CN=SRVDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local
Role Infrastructure Update Owner = CN=NTDS Settings,CN=SRVDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local
......................... SRVMTZDC01 passed test KnowsOfRoleHolders
Starting test: MachineAccount
Checking machine account for DC SRVMTZDC01 on DC SRVMTZDC01.
* SPN found :LDAP/SRVMTZDC01.shcorp.local/shcorp.local
* SPN found :LDAP/SRVMTZDC01.shcorp.local
* SPN found :LDAP/SRVMTZDC01
* SPN found :LDAP/SRVMTZDC01.shcorp.local/SHCORP
* SPN found :LDAP/9956d321-332f-482c-855c-8bceee885bb6._msdcs.shcorp.local
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/9956d321-332f-482c-855c-8bceee885bb6/shcorp.local
* SPN found :HOST/SRVMTZDC01.shcorp.local/shcorp.local
* SPN found :HOST/SRVMTZDC01.shcorp.local
* SPN found :HOST/SRVMTZDC01
* SPN found :HOST/SRVMTZDC01.shcorp.local/SHCORP
* SPN found :GC/SRVMTZDC01.shcorp.local/shcorp.local
......................... SRVMTZDC01 passed test MachineAccount
Starting test: NCSecDesc
* Security Permissions check for all NC's on DC SRVMTZDC01.
* Security Permissions Check for
DC=ForestDnsZones,DC=shcorp,DC=local
(NDNC,Version 3)
* Security Permissions Check for
DC=DomainDnsZones,DC=shcorp,DC=local
(NDNC,Version 3)
* Security Permissions Check for
CN=Schema,CN=Configuration,DC=shcorp,DC=local
(Schema,Version 3)
* Security Permissions Check for
CN=Configuration,DC=shcorp,DC=local
(Configuration,Version 3)
* Security Permissions Check for
DC=shcorp,DC=local
(Domain,Version 3)
......................... SRVMTZDC01 passed test NCSecDesc
Starting test: NetLogons
* Network Logons Privileges Check
Verified share \\SRVMTZDC01\netlogon
Verified share \\SRVMTZDC01\sysvol
......................... SRVMTZDC01 passed test NetLogons
Starting test: ObjectsReplicated
SRVMTZDC01 is in domain DC=shcorp,DC=local
Checking for CN=SRVMTZDC01,OU=Domain Controllers,DC=shcorp,DC=local in domain DC=shcorp,DC=local on 1 servers
Object is up-to-date on all servers.
Checking for CN=NTDS Settings,CN=SRVMTZDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local in domain CN=Configuration,DC=shcorp,DC=local on 1 servers
Object is up-to-date on all servers.
......................... SRVMTZDC01 passed test ObjectsReplicated
Test omitted by user request: OutboundSecureChannels
Starting test: Replications
* Replications Check
* Replication Latency Check
DC=ForestDnsZones,DC=shcorp,DC=local
Latency information for 7 entries in the vector were ignored.
7 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
DC=DomainDnsZones,DC=shcorp,DC=local
Latency information for 7 entries in the vector were ignored.
7 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
CN=Schema,CN=Configuration,DC=shcorp,DC=local
Latency information for 7 entries in the vector were ignored.
7 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
CN=Configuration,DC=shcorp,DC=local
Latency information for 7 entries in the vector were ignored.
7 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
DC=shcorp,DC=local
Latency information for 7 entries in the vector were ignored.
7 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
......................... SRVMTZDC01 passed test Replications
Starting test: RidManager
* Available RID Pool for the Domain is 14100 to 1073741823
* SRVDC01.shcorp.local is the RID Master
* DsBind with RID Master was successful
* rIDAllocationPool is 11600 to 12099
* rIDPreviousAllocationPool is 11600 to 12099
* rIDNextRID: 11737
......................... SRVMTZDC01 passed test RidManager
Starting test: Services
* Checking Service: EventSystem
* Checking Service: RpcSs
* Checking Service: NTDS
* Checking Service: DnsCache
* Checking Service: NtFrs
* Checking Service: IsmServ
* Checking Service: kdc
* Checking Service: SamSs
* Checking Service: LanmanServer
* Checking Service: LanmanWorkstation
* Checking Service: w32time
* Checking Service: NETLOGON
......................... SRVMTZDC01 passed test Services
Starting test: SystemLog
* The System Event log test
An error event occurred. EventID: 0x00000422
Time Generated: 05/02/2014 12:55:01
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\shcorp.local\SysVol\shcorp.local\Policies\{1A69D491-B88A-4F66-B294-4ABEC8C62886}\gpt.ini from a domain controller and was not successful. Group
Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
An error event occurred. EventID: 0x00000422
Time Generated: 05/02/2014 13:11:54
Event String:
The processing of Group Policy failed. Windows attempted to read the file \\shcorp.local\SysVol\shcorp.local\Policies\{1A69D491-B88A-4F66-B294-4ABEC8C62886}\gpt.ini from a domain controller and was not successful. Group
Policy settings may not be applied until this event is resolved. This issue may be transient and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
A warning event occurred. EventID: 0x80001083
Time Generated: 05/02/2014 13:18:00
Event String:
TCP/IP failed to establish an outgoing connection because the selected local endpoint was recently used to connect to the same remote endpoint. This error typically occurs when outgoing connections are opened and closed
at a high rate, causing all available local ports to be used and forcing TCP/IP to reuse a local port for an outgoing connection. To minimize the risk of data corruption, the TCP/IP standard requires a minimum time period to elapse between successive connections
from a given local endpoint to a given remote endpoint.
An error event occurred. EventID: 0xC0002719
Time Generated: 05/02/2014 13:20:41
Event String:
DCOM was unable to communicate with the computer 8.8.4.4 using any of the configured protocols.
An error event occurred. EventID: 0xC0002719
Time Generated: 05/02/2014 13:21:03
Event String:
DCOM was unable to communicate with the computer 8.8.8.8 using any of the configured protocols.
......................... SRVMTZDC01 failed test SystemLog
Test omitted by user request: Topology
Test omitted by user request: VerifyEnterpriseReferences
Starting test: VerifyReferences
The system object reference (serverReference)
CN=SRVMTZDC01,OU=Domain Controllers,DC=shcorp,DC=local and backlink on
CN=SRVMTZDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local
are correct.
The system object reference (serverReferenceBL)
CN=SRVMTZDC01,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=shcorp,DC=local
and backlink on
CN=NTDS Settings,CN=SRVMTZDC01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=shcorp,DC=local
are correct.
The system object reference (frsComputerReferenceBL)
CN=SRVMTZDC01,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=shcorp,DC=local
and backlink on CN=SRVMTZDC01,OU=Domain Controllers,DC=shcorp,DC=local
are correct.
......................... SRVMTZDC01 passed test VerifyReferences
Test omitted by user request: VerifyReplicas
Test omitted by user request: DNS
Test omitted by user request: DNS
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : shcorp
Starting test: CheckSDRefDom
......................... shcorp passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... shcorp passed test CrossRefValidation
Running enterprise tests on : shcorp.local
Test omitted by user request: DNS
Test omitted by user request: DNS
Starting test: LocatorCheck
GC Name: \\SRVMTZDC01.shcorp.local
Locator Flags: 0xe00031bc
PDC Name: \\SRVDC01.shcorp.local
Locator Flags: 0xe00033fd
Time Server Name: \\SRVDC01.shcorp.local
Locator Flags: 0xe00033fd
Preferred Time Server Name: \\SRVDC01.shcorp.local
Locator Flags: 0xe00033fd
KDC Name: \\SRVMTZDC01.shcorp.local
Locator Flags: 0xe00031bc
......................... shcorp.local passed test LocatorCheck
Starting test: Intersite
Skipping site SAO, this site is outside the scope provided by the
command line arguments provided.
Skipping site Default-First-Site-Name, this site is outside the scope
provided by the command line arguments provided.
Skipping site CWB, this site is outside the scope provided by the
command line arguments provided.
Skipping site POA, this site is outside the scope provided by the
command line arguments provided.
Skipping site RIO, this site is outside the scope provided by the
command line arguments provided.
Skipping site VIX, this site is outside the scope provided by the
command line arguments provided.
Skipping site SSA, this site is outside the scope provided by the
command line arguments provided.
Skipping site FOR, this site is outside the scope provided by the
command line arguments provided.
Skipping site BHZ, this site is outside the scope provided by the
command line arguments provided.
Skipping site BSB, this site is outside the scope provided by the
command line arguments provided.
Skipping site RCF, this site is outside the scope provided by the
command line arguments provided.
Skipping site BEL, this site is outside the scope provided by the
command line arguments provided.
......................... shcorp.local passed test Intersite

Direct Show causing "A device attached to the system is not functioning"

Hello,
I've been using direct show for about a year to connect to four webcams. I have an intermittent problem where by one of the cameras (at random) will not display the live feed. This could not happen for several weeks possibly months and then suddenly the
camera dies.
I run the following bit of code and receive error code -2147024865.
IMediaControl mediaCtrl = (FilterGraph)m_filterGraph as IMediaControl;
hr = mediaCtrl.Run();
DsError.ThrowExceptionForHR(hr);
In Hex this equates to 8007001F. From doing a bit of googling I found that this means a "A device attached to the system is not functioning".
No other application uses these webcams and nothing has changed to them physically. Direct Show, seems to make this camera unusable at random times.
Has anybody else experienced this problem and over came it?
Thank you in advance,
Mike

Hi Roman,
Thank you for your reply. I'm using a Logitech webcam and this camera is used by the Logitech controller software. This allows us to control the zoom, pan, focus and camera settings whilst connected to the camera in C# application. When this problem occurs,
the webcam device still shows up in device manager and the settings of the webcam state that the device is working properly.
I thought it may of been introduced by a possible memory leak that causes the camera to not respond, or that when the application closes it would leave the camera in a unusable state.
I've contacted Logitech to ask about drivers for the webcam and they state that it uses windows plug and play drivers. These are currently up to date.
The reason I thought that it may of been introduced by direct show is because these cameras have been used before on other products but using different software, Steribar (a software tool to use the view of a webcam as a cheap barcode reader), and haven't
experienced this problem with the cameras with this software. However very intermittently the custom C# app that I have created causes this problem.
Thank you for you time.
Mike

I got this message when saving photo from Iphone4s to my laptop's folder. "The device attached to the system is not functioning" What can I do?

I cannot save photo to my deskstop. When I copy to my folder, it indicated "The device attached to the system is not functioning". I don't update my IOS to the latest version in case my photo from my iphone will be missing. Please help. Thanks.

The Only thing I could do to save my pictures on my computer was to send them via Facebook chat to myself, send them one by one then on your computer open then and dragging them is way faster than right-click Save As. I just did that and I do not want to reset my phone so I guess I will continue doing this as I get more pictures or until I feel like resetting my phone. I believe this issue happens when you Connect and while transfering one or more file from one end to another, and you suddenly disconnect the iPhone or any apple divece, the file that wasnt completely transfered gets corrupted and I guess the whole /Picture/Video folder or perhaps the whole device gets corrupted as well. I am sure that this is a cause to this issue but I do not know if there are other causes or if the same one happened to you.
How to prevent this from happening again?
Always go to iTunes and click on "Eject" under your device tab before disconnecting your device from your computer. Even if you are not transfering any files at all.

Access share on NSS4000 with error: A device attached to the system is not functioning

Hello,
We use Acronis True Image Server to backup 4 Windows 2008 Standard Server system
with 2 different domains, each containing a DC and a RDP-Server.
After Server reboot, backup will run only once a day.
The next day backup aborts, and while trying to access
the network share like \\ip-address\share, as configured in Acronis
I get the error message: A device attached to the system is not functioning.
On the other hand, I can ping the NSS4000 and access share by using the
network (netbios) name instead of the ip.
This will work only for one day, also.
Now, if I try to access the share on the NSS4000 again by ip,
I get the error code 0x80070043 The networkname can not be found.
Ping on ip and netbiosname works.
Share access from one server to an other is not affected and full funtional at all times.
On the first sight I thought, that there it might be with the authentication protocol NTLMV2.
So I configured the GP to send only NTLM Authentication only, without fixing the problem.
Fyi:
I use a NSS4000, Firmware version 1.16-3
The NSS4000 is not a member in neither domains.
I created a dummy user account on each domain, an created a local user on the NSS4000 related
to the dummy user account on each domain.
A good answer helping me to fix with this issue, would be great.

I am constantly seeing this error at multiple sites on Windows Server 2012 and 2012 R2 Standard and DataCenter.
I have counted over 50 different server I manage with services such as domain controller, hyper-v, file servers, exchange 2013, SQL 2008/2012, and print servers.
I have seen it happen on machine that have been in production for over 2 years and to machines that were just created last week.
It is happening on metal, hyper-v and esx vmware servers.
It is happening when the machine have updates waiting or no updates, or after updates have been applied and awaiting a restart.
It is happening on Dell PowerEdge server, HP Proliant servers and IBM servers.
It is happening on servers with Intel and AMD chip-sets.
It is happening on machines that are a part of a domain or in a workgroup.
It is happening on machines with AV of Bitdefendor, Trend Micro, Vipre, Microsoft Endpoint, and Symantec Endpoint.
Only a restart will fix it.
I have ran process monitor on several of the problem machines and I cannot find anything.
Since I have only started seeing this about 6 month ago it must be a Windows update causing it.
Moses Hull of Alexant Systems

'The logged-on user does not have permission to use this object'

Hello everyone,
I am getting the message 'The logged-on user does not have permission to use this object' while saving the Sales Order. I am logging in as a CRM user. There is an addon also running on the server, that saves some data into a user defined table when the Sales Order is saved. Is there any authoisation for users to access user defined tables.
Regards,
William

hi William,
this is an Authorization issue. provide the user with authorization on your UDT. Definition of user authorization can be found in Administration -- >> System Initialization -->> Authorizations -->> Additional Authorization Creator.... if already defined from here you can fined the additional authorization from the General authorization window.
regards,
Fidel

Error Message' "The loged on user does not have permission to use this obje

The loged on user does not have permission to use this object-
I am entering a Sales order, which is customized, when I add the Sales order this system imformation appears.
The user has a pro-license and authorizations to all AR
Can someone tell me what my problem might be?

Thank you for your help

The loged on user does not have permission to use this object'

A professional license user currently has Authorisation to all Customer BPs and Sales Documents.
When creating a random Sales Order, the error message
'Create POs(): The loged on user does not have permission to use this object'
is occuring. This is not occuring for all Sales Orders, this is occuring randomly.
Note that the Purchase Orders Button in the Logsitics tab in the sales order is NOT selected.
Cheers Lisa

hi lisa
there could be some changes in transaction notification from your side if there are any i would request you to please comment all the changes and then try saving the document it would definately go ahead as there has to be some change in the stored procedure ,
Regards,
Manish

Error Loged On user does not have permission to use this object

Hi all,
I am trying to Export Document Data in XML format
for OSalesinvoice or oPurchaseInovice object it is working fine
But if i use oPurchaseTaxInvoice it is giving error
"An unhandled exception of type 'System.Runtime.InteropServices.COMException' occurred in myDUAPI.exe "
"Additional information: The Loged On user does not have permission to use this object"
I have logged as "manger" "manager"
Dim oInv As SAPbobsCOM.Documents
        'oInv = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oInvoices)
        'oInv = vCmp.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oPurchaseInvoices)
        oInv = vCmp.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oPurchaseTaxInvoice)
        If oInv.GetByKey("9") Then
            oInv.SaveXML("C:\downloads\purinvtax.xml")
        Else
            MessageBox.Show("couldn't find it")
        End If

Hi Sudish,
It looks to me that the logged on user is only a CRM user. You need to have a professional user license to access Invoices.
If you're using only the DI API, please check which user name you are using to connect to DI. If you're using UI API with single sign on, the logged on user to SBO is not a professional user or don't have the correct authorisation.
Hope it helps,
Adele

"The Loged On user does not have permission to use this object" error

Hi
I've created a form that is used by a customer which allows for certain draft documents to be approved and then once approved they are created. The problem that I am having is that when the users attempt to update the changes on the form an error is logged, which is shown below:
"Error: -3000
The Loged On user does not have permission to use this object
System.Runtime.InteropServices.COMException (0xFFFFF448): The Loged On user does not have permission to use this object"
Once the update button is pressed then a User Defined Table and Drafts are both updated with the relevant modified UDFs from the form.
If I log onto their system then I don't seem to get any issues. To me it looks like a user authorisation problem but the ones who have used the form seem to have the relevant licences.
Do you have any idea why this error could be occuring?
Thanks a lot.
Steve

Hi,
Go to Administration --> System Initlization > Authorizations> General Authorizations not expand all and check if the service call is given full *Read & Write * rights to the required user.
If not then give full rights and check the add on.
Hope it helps,
Vasu Natari.

Java.util.zip.ZipException: a device attached to the system is not function

getting a java.util.zip.zipexception : a device attached to the system is not functioning error - what could cause such an error?
My program finds all zip files in an archive and then searches through them for xls files, which it extracts and re-locates.
I havent even a clue where to look for the cause of this exception but Ill attach at the bottom the code in the general vicitiny of the trigger so that you can get kind of an idea what Im trying to do, and if im lucky, even spot my problem. :) Thanks!!
//zips is an array of zip files
int found = 0;
File[] haveXLs = new File[zips.length];
for (int i = 0; i < zips.length; i++){
String fileName = new String("L:/Vision/Archive/" + zips.getName());
ZipFile archive = new ZipFile(fileName);
String name = zips[i].getName().substring(0,8);
for(Enumeration e = archive.entries(); e.hasMoreElements();){
ZipEntry entry = (ZipEntry) e.nextElement();
if(entry.getName().substring(0,8) == name){
haveXLs[found] = zips[i];
found++;

Hey there a few things.
Make sure that you dont use fileseparators like you do. ("/")
Use the separator generated for your system.
Something like:
String sep = System.getProperty("file.separator");
You mentioned it work local, but not network.
Either you have plenty of harddrives or L: is a mapped drive.
Is it working at the mapped drive?
When you say on the network, how are you accessing the files?
Could it be possible for another user to lock a file, so you wont have access to it over the network?
BR.
MagDy

Communication problems: A device attached to the system is not functioning.

Hi all,
I'm developing an applet and using the OMNIKEY 5321 CL reader for communication and testing. One of the requirements for our card is to read large binary data.
For this purpose i used extented lenght APDU to read the data from card.
When I tested it via JCOP simulation I was able to read up to 32767 bytes as described in specification. But problem occurs when I test it with reader, in this case I'm able to read max 298B in APDU response. When I send greater byte count than 298B i have got following error in JCShell plugin:
jcshell: requestSessionKey.jcsh[1]: Error code: -6 (Card terminal error)
jcshell: requestSessionKey.jcsh[1]: Communication problems: A device attached to the system is not functioning.
Regarding the extend lengh APDU support it should by OK from the OMNIKEY. I'm using newest driver 1.2.9.2 for Win 7.
Here my configuration:
JCOP:JCOP 2.4.2r1
JAVA CARD: jc301
Global Platform: gp22
Can somebody help me? Any ideas?

If you want to use PC/SC directly, I have a simple Go program that reads an APDU file (just hex encoded APDU strings) and sends them to a smart card. You can give that a try if you like.
The code is at: https://bitbucket.org/safarmer/go-apdus
There is a Goclipse project as well as the source. You will need to install Go and run "go get github.com/ebfe/go.pcsclite/scard" to install the required PC/SC wrapper. Once you have done this you can run the program with -file <apth to text file>
An example text file:
# A comment that is ignored
00a4040000
80ca9f7f00- Shane

Error message saying a device attached to the system is not functioning

i m getting an error message saying a device attached to the system is not functioning whenever i m trying to connect my pc to my smartphone. i tried all your options like uninstalling failed updates from my update history, checking if their is any flag
in device manager option but nothing helped me.. plz solve my problem..

Hi,
Could you please have a share with your phone's information?
Based on what I know, different phones may have different softwares developed by the manufacturer to make the connection through Windows operating system, we may check with the phone's manufacturer side and see if there could be some helpful information
offered.
Besides, please take a check with
Event Viewer and see if any special errors logged there.
Best regards
Michael Shao
TechNet Community Support

Can not drag files off iphone onto windows 7 Laptop (Error: A device attached to the system is not functioning!) Any ideas on how to resolve this, Much appreciated

Connect phone to laptop, AutoPlay Box appears, click open Device to view files, internal storage, DCIM, Drag all Pictures/Videos into folder on desktop. Message pops up within a few seconds, Saying 'A Device Attached To The System Is Not Functioning.'
Can any be of assistance?
Many Thanks.
Callum.

Is the computer in question connected to the Internet, and if so, is the Internet connection working correctly?
It is possible that Adobe Reader tries to check for updates when it is launched, then finds a faulty network connection.
Check the Device Manager for non-functioning network devices.
Also try http://fixitcenter.support.microsoft.com/ to find other potential problems on that system.

"A device attached to the system is not functioning"

Hi!
I'm hoping that all the smart people here can help with my problem. I help support/develop several custom windows application. One of these applications is written in Delphi and there is currently a problem with a feature a single computer owned by a client.The client's computer does have the latest version of adobe installed.
* The user is able to select a document from a data grid, and click a button to view that document (in this case a pdf).
* The document is saved from a database to the user's disk
* Using a shell command, the application asks windows to open that file.
Normally this works quite well, until recently. If this client tries to view a pdf file in this manor windows returns a system error, error 31, and the message "A device attached to the system is not functioning" is displayed. If I naviage to the location where the file was saved to an attemp to open it via double clicking, adobe reader opens the document right up. The application historically has had no problems with pdf's nor any other doucment type. If I change the file assoication from adobe to note pad, the application does open the file with note pad, but it is not readable. If I change it back to adobe reader, the problem persists. I've tried uninstalling adobe, reinstalling, and using a previous version of adobe. Any suggestions would be appreciated.
FYI, before someone tell's me I should be talking to microsoft, I am also inquiring on the windows side of this through msdn. Since I am not 100% sure if this is a windows or adobe reader issue I would appreciate suggestions on both sides.
Last but not least, incase it is of any help, this is the delphi command used to ask windows to open the file:
ShellExecute(GetDesktopWindow, 'open', PChar(TempFile), '', '', SW_SHOWNORMAL);
Any and all help is appreciated.
Thanks!
Louis

Is the computer in question connected to the Internet, and if so, is the Internet connection working correctly?
It is possible that Adobe Reader tries to check for updates when it is launched, then finds a faulty network connection.
Check the Device Manager for non-functioning network devices.
Also try http://fixitcenter.support.microsoft.com/ to find other potential problems on that system.

When accessing shared folder - 'You might not have permission to use this network resource" .. A device attached to the system is not functioning

Similar Messages

Maybe you are looking for