When adding an email, what is IMAP and SMTP?
What do I put in that blank space?
When I try to send an email through my yahoo account It says the server has trouble connecting Or something cannot connect to the server. So all those settings are messed up & I don't know what goes where- anymore I stuck my nose where it shouldn't have be I know I'm guilty! Need help please! Thank you in advance again!
Similar Messages
-
I am unable to see any POP3 or IMAP tab when I set up an account in my iphone 4S. Hence by default all my email accounts become IMAP and the messages are deleted from the server when I delete them from the iphone.
ok sorry everyone but i solved it myself but the solution is so nuts i've posted it here to help others who have the same problem.
to setup a comcast imap account on your iphone:
go to mail, contacts, etc in settings
under accts, select add account
select "other"
new screen, choose "add mail account"
now on the new acct screen you must enter your name, email address and password for your GMAIL acct ! (yes i said your gmail acct !, or some other acct with a NON comcast address).
hit next
then the acct verifies
when verified a screen will open with all the acct settings for this acct AND @ the top of the screen are the 2 buttons > imap or POP
select imap and THEN CHANGE ALL THE ACCOUNT information to the comcast account !
then hit next and the account will take a couple minutes to verify but it will verify and now you have a comcast imap acct set up on your iphone. The problem must be that when the iphone sends the initial verify acct info to comcast (if you enter that information first) the comcast server is simply not setup yet to signal the iphone that there is an imap option. -
Mac OS X 10.6.8 statup problem: desktop goes black 10 secs after booting, can remain apparently asleep for 15 mins. I can't prompt it to wake, until recently it would wake when peripheral were added (earphones). What is wrong, and how can this be fixed?
You need to fresh install 10.6, programs fresh form original sources and return only vetted files (no TM migrations) from a regular storage drive
But this when erasing the drive use the Security Option: Zero All Data before installing 10.6
What has happened your data got corrupted and it's corrupted on the TM drive too.
So the Zero will map off bad sectors on your drive, the 10.6 install will be fresh, the programs will be fresh and only files will be returned, you'll find out in short order which ones they are.
Reducing bad sectors effect on hard drives
How to erase and install Snow Leopard 10.6
Once you are back up, then consider making a option key bootable clone.
Most commonly used backup methods explained -
What IMAP and SMTP must i use to connect to Apple Mail?
what IMAP and SMTP server must i use in my Entourage email client to connect to Apple Mail?
Use these settings for iCloud - http://support.apple.com/kb/ht4864
-
Ovi Mail IMAP and SMTP servers constantly down
I'm reading my ovi.com emails with a Lumia smartphone and with Outlook. I constantly fail to connect to the IMAP and SMTP server and thereby do not get or cannot send emails. Webmail works fine, but especially sending emails from Outlook or from Lumia is currently impossible. Mails just get stuck to the outbox folder and both Outlook and phone keep asking for the password, as if my password was wrong.
This has happened randomly after the Yahoo transfer, but now it is happening on daily basis. I haven't been able to send emails from my Lumia in a week. The settings both in Outlook and in Lumia are correct, have checked several times. Usually when I leave my phone alone for a night, in the morning it has synced the inbox, but not the Outbox.
Anyone have similar problems?Ok.. if you guys have a final configuration please share...
I spent all morning and this after over 30min chat with nokia care support... final answer? they told me to contact Yahoo!
In the meantime, I also contacted nokia through tweeter and they were like: .. but nokiamail has been deactivated! I found it strange because my last income email on my cel was on Aug13... and I can still access nokiamail through webpage (www.nokiamail.com) so it´s not dead.
I´m using my name on the site as ******@ovi.com (cool, right?) but I want to have access to it on my ipad and another cel...thx for any help!
Moderator's Note: We have removed your email address for security purposes. -
Mails sent to the iPhone (5S) do not appear in sent mail. Neither iOS nor OSX. I need detailed instructions IMAP and SMTP on iPhone and on OSX
I have two accounts gmail.com and icloud.com.Only mails sent from iPhone not appearing in sent by IP or in OSX
-
I have 11 e-mail accounts that was working fine a minute ago, but now they all say that they can't connect to the IMAP and SMTP servers.
They all work fine on my iphone.
How should i troubleshoot this?
Thanks in advance.Nevermind, restarted for the third or fourth time, and now it works...
Perhaps it was a time-issue. -
When i receive emails they are deleted and i do not know why
I have an IPad Air version 7.1.2 and model MD787LL/A and it has 56.6 gb. When i receive emails the automatically delete themselves and i cannot figure out how to stop this. Can anyone help me with this please.
RichardIf you're using an IMAP account, also check your other devices to be sure you don't have some filters or rules set up that either delete or move emails to subfolders. You can see all Emails on your iPad, but displaying the sidebar showing Mailboxes, tapping the email account you are having trouble with (NOT the Inbox, but the section below), then tapping All Mail or something similar depending on your provider.
If the mails are there, they are somehow being moved by one of your mail clients or by a rule you set up with your provider. -
When adding listview items, the listview1 items flash and only the first listview column loads (there are 5 columns in all)?
Background...
I was having cross-threading issues on 3 form components which I was able to resolve (see
code here). Now I think the soluiton which involves creating a delegate and performing an "InvokeRequired" check (see
what I used), I'm having an issue passing 5 values for each column. Below is the code involved calling this invoking check for each and their methods.
Before having the cross-thread issue the "listview1.Items.Add(values.text) add the comma separated string values to the appropriate columns, but that doesn't happen through the cross-thread fix required.
The "Loading()" method is handled through and async/await method causing the initial cross-thread issue.
private void Loading()
int t = 1;
foreach (string line in scripts)
string[] listValues = line.Split(',');
ListViewItem values = new ListViewItem(listValues);
if (t == 1)
AddColumn("Script Name", 200); // Creates column headings
AddColumn("Date and Time", 150);
AddColumn("SID", 75);
AddColumn("Environment", 75);
AddColumn("Client", 75);
t++;
else
if ((values.Text != "") && (values.Text != "Script Name"))
//listView1.Items.Add(values);
AddItem(values.Text);
if (!dictScript.Contains(values.Text))
dictScript.Add(values.Text);
//cbxScriptList.Items.Add(values.Text);
AddScript(values.Text);
private void AddItem(object o)
if (this.listView1.InvokeRequired)
AddItemCallback d = new AddItemCallback(AddItem);
this.Invoke(d, new object[] { o });
else
{ // code that adds item to listView (in this case $o)
listView1.Items.Add(o.ToString());
private void AddScript(object o)
if (this.listView1.InvokeRequired)
AddCBXCallback d = new AddCBXCallback(AddScript);
this.Invoke(d, new object[] { o });
else
{ // code that adds item to listView (in this case $o)
cbxScriptList.Items.Add(o.ToString());
private void AddColumn(object o1, object o2)
if (this.listView1.InvokeRequired)
AddColCallback d = new AddColCallback(AddColumn);
this.Invoke(d, new object[] { o1, o2 });
else
{ // code that adds item to listView (in this case $o)
listView1.Columns.Add(o1.ToString(), (int)o2); // Creates column headings
SVOk, I still have the flickering issue, I could use some guidance on that. And I should note that before I had the code-threading issue, I never had any flickering, it all appeared simultaneously.
However, I was able to populate all columns (5 in all). I had two corrections to make.
1) My method should not have been passing the parameter as text but as the object ListViewItem:
// Not This...
AddItem(values.text)
// This is Correct...
AddItem(values)
2) Then I needed to cast my object as a ListViewItem in my method call:
private void AddItem(object o)
if (this.listView.InvokeRequired)
AddItemCallback d = new AddItemCallback(AddItem);
this.Invoke(d, new object[] { (ListViewItem)o });
else { // code that adds item to listView (in this case $o)
listView1.Items.Add((ListViewItem)o);
SV -
When adding an email account my ipone will not accept my password
I am having trouble adding an email account to my phone. I had to get a new one and restore it to the last backup. However it will not take my password which i know is correct because I can sign in via the internet. Is there a trick or someway to solve this?
Which email provider are you using? If it's google, make sure you don't have 2-step verification set on your account.
-
My battery drains really fast and my macbook shuts off without warning basically everytime it is disconnected from power, what is wrong and how can I fix it? also whenever an application is opened the computer freezes and the application will either shut down or make the macbook run really loud.
Charge Information:
Charge remaining (mAh): 1450
Fully charged: No
Charging: Yes
Full charge capacity (mAh): 1739
Health Information:
Cycle count: 379
Condition: Poor
Battery Installed: Yes
Amperage (mA): 196
Voltage (mV): 12573
I have the 13inch macbook and it is 2 years old (bought august 2009) -
When i accept invites in ICAL when added via email it removes it
this has been happening for a while now and i really do not understand as it worked ok before then one day changed
basically when i get a callender invite from google cal via a email i use the attached invite.ics to add it to my phone (iphone 4)
it adds to my phone simple enougth and syncs to my ical on my mac
now when i look on my ical on my mac the invites are gray (should be green) and ask me to accept or decline
when i accept the invite it dissappears from my ical completely - i can not find it at all
BUT it is still on my phone's calender as normal
why is it doing this?
also i have a problem with once added i can not delete events sent this way and editing them (ether manulaly or when sent a update to the same event)
any help will be greatly apperciatediPhoto books cannot be delivered to a different county. To get your book delivered to the US, try to order from the US Print service.
Set the Print Products Store to "United States" in iPhoto's "Preferences > Advanced" panel.
You will need to use an AppleID, that has a billing address in the United States, and also a credit card valid in the United States.
See: http://store.apple.com/us/help/print_products -
Curve 9300 "Update failed" when adding second email address
Device info
Your carrier: Partner Israel
Model info and OS version (Go to Settings, then Options, then about): 9300 6.0.0.668
Add above to you profile if you dont wat to type it in all the time.
Apps and free space
File free before and after a battery remove/replace. (Go to Settings, then Options, then status): 68.1 MB
Did a battery pull fix your issue? NO
Apps installed and their version if possible. (Go to Settings, then Options, then applications): Zello; Google talk; Email setup; Brickbreaker; Browser
BT device model/version (you will have to look at the BT device):
When writing your question
Any other details that would help us out with your issue: Reregistering with blackberry network did not work
Good description of what is really wrong and how to reproduce if possible. Details of what you did before:
Trying to add three email addresses. The first one always works, the second one always fails with "Update failed" message. If I delete teh first one I can add the second, but I can never add an address when one is already set up. Talking to Orange (Partner) didn't work. Security wipe didn't work.Contact again your service provider. Ask them how many email can you add to your BackBerry.
Thanks.
Please thank those who help you by clicking the button.
If your issue has been solved, please resolve it by marking "Accept as Solution" -
'sign in' button grayed out when adding account-email address has five letters after the '.'
so i have this email account that uses a peculiar sever name with five letters after the '.' ie: [email protected] the thing is i can set up the server and user name and pass for the account so that it connects and syncs fine. the only problem is that i have to leave out one of the letters at the end of the address when setting it up or webOs will not let me sign in (the button is grayed out).
so to get around it, i just left off one of the letters at the end ([email protected]). this let me set up the account BUT i can't send emails because the server requires that all messages come from the internal accounts with all five leters in the suffix ([email protected]) and since my address is missing a letter it won't accept and out going emails.
Is there any way i can get around this? either by disabling the prevention of entering in 5 letters after the '.' or by going somewhere to add the letter back in after the fact. Please help!!! Thanks
Post relates to: Pre p100eww (Sprint)The problem is where you enter your address and password for ESMTP (outgoing authentication)? Many mail clients let you check a box to use the same username and password that you use to retrieve email. I gather that isn't an option in webOS?
-
The timeline is covered with top-to right grey lines. When I share as 29.7 .mov, that portion appears as black in the .mov.
What is it? How do I get it to go away.
JimIf you double click on a compound clip or right click on a clip and select open in timeline in the project timeline then a new timeline opens and it will have the gray slanted lines and if you export from that timeline the gray slanted lines areas will be black in the exported file. Perhaps that is what you did. You can also right click a clip in the Browser and select open in timeline and get the same result.
Maybe you are looking for
-
Hi, I recently updated to OS Mavericks. And in the beginning I really liked the update, but I recently fired up my After Effects CC and Premiere CC to work on some animation videos I had to produce for client. And when I wanted to export my animation
-
[MENU] Image as menu. Possible?
Hello everyone! I am building a site for a friend of mine who is finishing his end-course project and this is what I have in mind: Upon moving the mouse over the background puzzle image, the individual pieces "raise" and the related text appears (suc
-
Where do i download rented movies to on my macbook pro to then watch offline later?
Where do i download a rented movie from iTunes to so i can watch it offline on my macbook pro?
-
Hello, I am uploading CSV file into BI Application server using WINSCP basically this tool FTP the CSV file into BI Application server. I am trying to load the data into PSA , I am getting below error message "Cannot convert character sets for one
-
package{ import flash.display.MovieClip; import flash.events.MouseEvent; public class MainTimeline extends MovieClip{ private var movieArray:Array = new Array(8); private