When adding audio books to ipod either manually or by syncing, the tracks seem to be in the right order but they play back in a random order which means you can't listen to the book. How do you overcome this? (Bill)
I have tried adding audio books to my ipod classic, both by syncing and manually. The tracks come up in the right order in the menu but when listening they will often play (not always) in a random order. How do I overcome this, as it is making listening to books impossible. (Tarraganda)
I have found the problem myself when I got into the Settings. Somehow it had been put onto shuffle all music files and once I turned that off it reverted to normal. I realised something basic was wrong when our other ipod that had been synced at the same time didn't have a problem. However, I had put all the books on manually, one album at a time as problems occurred when syncing the whole library, including multiple albums for the same piece of music.
Similar Messages
-
how do you unlock an ipad mini so you can use an overseas sim card, how do you unlock an ipad mini so you can use an overseas sim card
iPads are not "locked". Get an iPad data plan and sim card from a local provider and connect to their 3G/LTE service.
-
I love the Rachel Maddow Show but rarely get to watch it on TV. So I rely on the podcasts to listen to every day. I've been using Stitcher but Apple's more recent Podcast app has much better functionality (downloading episodes to listen to on the subway & plane, for instance). However, for some reason (and it appears to only be TRMS podcasts), the Apple Podcast app ONLY displays the last episode. For some reason, each day, the last episode disappears from the app.
Same here! Older episodes don't necessarily disappear as soon as new ones come in; sometimes I have a few episodes on the iPhone, and can listen to them normally. But then I'll look later, and all but the latest will have disappeared. I'll have to start paying attention to discover what triggers the wipe; my guess is that syncing with iTunes does it, but I don't know yet.
Whatever the cause, it's odd. I thought that perhaps queued episodes would stick around if I partially listened to them (thus ensuring that they get actually downloaded, I'd think), but partially-viewed episodes and unviewed episodes both disappear. I can understand that an episode that never got downloaded might become unavailable after a day or few, but why would one already downloaded get automatically erased?
It's also worth noting that I don't have the problem in iTunes on the Mac. Episodes there stick around in the normal fashion. The problem is just on my iPhone, and just with this one podcast.
If anyone knows what's up, please tell! -
Can anyone help me fix itunes? It will no longer sync with my iphone.
More info needed... and why didn't you have a backup of your computer to restore from?
Why won't it sync?
Any error message? If so, what does it say?
Does iTunes see the phone when it is plugged in?
Are you on a Mac or PC? What version of what operating system is your computer running? -
please help me!!
Apple ID security issues -
Call Apple Care and ask for the Account Security Team. They can assist you with your issue. -
I published a video as an mpeg, and when I listened to the final product it was missing some music I had in the "audio 2" slot. How do I fix this?
Cameron
Is the problem Audio Track 2 music from any of your royalty free music websites? Is the sound missing in the export
standalone audio files
or
audio that is linked to video?
What is directly under or above these files on the Timeline?
Download and install the free codec utility named GSpot.
And, tell us the readouts for Audio name, codec, and status.
GSpot Codec Information Appliance
If also video component of the file, then please include the Video name, codec, and status information from the GSpot readout.
See what information you can put together on the properties of those royalty free audio files, including file extension. Are you dealing with Stereo or 5.1 channel (AAC or Dolby Digital)?
As for project preset, versions 11 and 12 were designed so that the project takes charge of setting the project settings based on the properties of
the first file drag to the Timeline. Sometimes it does it right. Sometimes not. If not, then you set the project preset manually using the properties of
your file. See ATR Premiere Elements Troubleshooting: PE11: Accuracy of Automatic Project Preset (New Project Dialog) Setting
Lots of additional questions...curious how you hear the Audio 2 audio in Edit area but not in the exported file which you report as
Publish+Share>Computer>MPEG under the preset "MPEG2 1920x1080i 30.
Any export setting customization going on under the Advanced Button/Video Tab and Audio Tab of that preset?
Please review and consider and then we will decide what next.
Thank you.
ATR -
On a Mac, in Adobe Photoshop CC 2014, when adding audio to an edit, i get the message "Could not complete your request, because Dynamiclink is not available".
When performing the exact same operation in Adobe Photoshop CC, i can add audio in the same way, no error message. Any ideas to solve this, anyone? Would be greatly appreciated.I tried to update and it keeps telling me to get the Application Manager. And this is what happens
Adobe Application Manager failed and it told me to download the Adobe Support Advisor.
Adobe Support Advisor told me that there was an issue:" cpsid_82829s1: "A restart is pending," bootstrapper error has occurred. "Token Number: 40-87772-063201122012
I followed the instructions it gave me to correct this issue:
If you receive the error "Installer has detected that a machine restart is pending. It is recommended that you quit the installer, restart try again," do the following:
#Restart the computer and try the installation again.
#If the installation fails, delete the InProgress registry key:
Disclaimer: This procedure involves editing the Windows registry. Adobe doesn't provide support for editing the registry, which contains critical system and application information. Make sure to back up the registry before editing it. For more information about the registry, see Windows registry information for advanced users on the Microsoft support site, or contact Microsoft.
Launch Windows Registry Editor.
(Windows XP) Choose Start > Run, type regedit in the Open text box and click OK.
(Windows Vista/ Windows 7) Choose Start, type regedit in the Search box, and press Enter.
Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager.
Delete the InProgress key.
I was not able to find the "InProgress" key. -
Hi
I've a big problem with adobe acrobat reader XI pro and I hope you can help me.
The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reader (adobe pdf reader, internet browsers, ...etc.).
This problem started to happen since yesterday when I installed adobe acrobat reader XI pro to try it before I buy it, and before that when I was using the free adobe pdf reader I was totally able to copy any text from any pdf and past it anywhere with nothing wrong.
What can I do?
thank you a lot.There is no product called Adobe Acrobat Reader Pro. There is
- Adobe Acrobat Pro ($$)
- Adobe Reader (free)
Which do you have? And are you a programmer? -
When you drag a link onto your desktop, how do you change the image for the shortcut?
When you drag a link onto your desktop, how do you change the image for the shortcut?
Select it, hit command-i (or choose File -> Get Info), select the icon in the info window and paste something else there.
-
Pointer when adding audio to clip
When adding audio/music to a clip (not background) it sits below the clip with a small arrow/pointer pointing to the clip. What does that pointer indicate? Why does it move? Can someone point me to resourcs that explain that in detail?
ThanksI think you are right that the marker "stays". I don't have any special insight to how this was coded by Apple, but it appears to me that you initially attach the audio to a certain frame in a certain clip. Later you can drag the audio forward or backward, and it may remain attached to the initial frame, but be given an offset. For example, the audio is attached to frame five of clip three, but the audio actually begins at -30 or 30 frames to the left of the anchor frame.
I think if you experimented with it, you might find that if you delete the clip with the anchor frame, the audio is deleted, too, but I don't have time to test this right now. -
I have an Ipod 5 and you can not listen to music unless you have headphone plugged in
I have an Ipod 5 and you can not listen to music unless you have headphones plugged in
- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar -
I have iTunes version 10.03 which I love but my iPad Apple mini has iOS 7 but I don't understand the new iTunes what is the cloud shown next to the music and how can I find duplicates can anyone help me navigate the new iTunes and will the new version sync with my iPod Classic which is 4 years old
The main differences between iTunes 11 and earlier versions are the loss of coverflow and ability to have multiple windows open.
In Windows, you can restore much of the look & feel of iTunes 10.7 with these shortcuts:
ALT to temporarily display the menu bar
CTRL+B to show or hide the menu bar
CTRL+S to show or hide the sidebar
CTRL+/ to show or hide the status bar (won't hide for me on Win XP)
Click the magnifying glass top right and untick Search Entire Library to restore the old search behaviour
Use View > Hide <Media Kind> in the cloud or Edit > Preferences > Store and untick Show iTunes in the cloud purchases to hide the cloud items. The second method eliminates the cloud status column (and may let iTunes start up more quickly)
If you don't like having different coloured background & text in the Album (Grid) view use Edit > Preferences > General and untick Use custom colours for open albums, movies, etc.
With iTunes 11.0.3 and later you can enable artwork in the Songs view from View > Show View Options (CTRL+J) making it more like the old Album List view
View > Show View Options (CTRL+J) also contains options to change the sorting of grid based views
The cloud icons give you access to stream or download any qualifying past purchases that you don't currently have downloaded to the library.
Regarding duplicates, things haven't really changed. Apple's official advice is here... HT2905 - How to find and remove duplicate items in your iTunes library. It is a manual process and the article fails to explain some of the potential pitfalls.
Use Shift > View > Show Exact Duplicate Items to display duplicates as this is normally a more useful selection. You need to manually select all but one of each group to remove. Sorting the list by Date Added may make it easier to select the appropriate tracks, however this works best when performed immediately after the dupes have been created. If you have multiple entries in iTunes connected to the same file on the hard drive then don't send to the recycle bin. Use my DeDuper script if you're not sure, don't want to do it by hand, or want to preserve ratings, play counts and playlist membership. See this thread for background and please take note of the warning to backup your library before deduping.
(If you don't see the menu bar press ALT to show it temporarily or CTRL+B to keep it displayed)
Yes, iTunes 11 will support your iPod classic.
tt2 -
The songs on my Ipod Classic wont play at all although you can feel and hear the machinery working hard. The tracks are not playng at all but you can see the Ipod rewinding them all and returning to the album. And this happens to the second IPOD I just got!
First off, I would STRONGLY suggest that a external hard drive would make you life much easier by at least being able to back up your songs on the external drive for when you need them. Even if you don't want them in the iTunes library, you can have them all ready on the external to be re-added as needed. You can get 100's of gigs for under $100 shipped.
Anyway, since you used Yamipod, are all the songs back on the computer? If so, I would go ahead and restore the iPod, let iTunes then resync everything back to the iPod, then switch it back to manual and see if the restore and resync clears up the issue.
Patrick -
I Have An Iphone 4s And When I Listen To Music With My HeadPhones I Cant Lower The Volmume of The Music Beacuse Then It Will Have No Sound I Can Only Listen To The Music With The Volume Loud I Need Help What Can I Do ?
Hi Yendy14,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
Troubleshooting iPhone, iPad, and iPod touch accessories
http://support.apple.com/kb/TS2634
Cheers,
- Judy -
When I try to play a song on my iPod Touch, it shows the information screen for the song and then skips to a new song but then goes back to the main playlist page without ever playing a song! Help!
thats tough man, yeah exchanging it is the best option. But why do people always leave a message saying" i'll probably just by an ipod" and it's usually followed by, "even though i don't like apple or ipod" . I mean fine, if u feel like giving up on the zen micro thats fine, i personally don't care if you're going to buy an ipod. for god sakes ipod isn't even the next alternati've mp3 players, theres plenty. Are u just trying to get the creative people saying "oh man we lost another one to ipod" cuz i'm sure they don't lose sleep over u wanting to buy an ipod instead of a zen. *done ranting*
Message Edited by bleakreserve on 02-3-2005 06:34 AM
Maybe you are looking for
-
How can I change the font when creating an e-mail in Outlook's web-mail mode?
I am new to Firefox. When I go to a web-mail server, I can click on sending a new message. While there, I cannot find any way to change the font, font size, or color of the text. All of these options were available in a toolbar at the top of the mess
-
How can I remove the underline from added text for tracing edits
We have a lot of content that includes underscores and when we use the track text edit feature added text is green and underlined. How can I change the properties of the added text to not be underlined?
-
How to Count the Materials used in the Service Orders
Hi Experts, I have created a replacement variable to get the count of the materials in the report. Here I have some service orders where material is not consumed. It is called no part call. When I run the report. It give count for all the materials a
-
How to reduce flicker on imported clips?
Clips are shot with 25p. Due to neon lights there is flicker in bright areas. How can I reduce that?
-
Converting plug-in of CS2 into CS(About Scripting)
Hi,all. About Converting pulg-in of CS2 into CS, I have a problem in scripting process. In CS2 pulg-in, I overrode RepresentScriptProvider::AppendNthObject() and RepresentScriptProvider::GetNumObjects(). But in CS, the arguments of the method of abov